CUCM SQL Query - MGCP EPs IP Addresses

Hello,
CUCM 9.x.
Could you please advice me the CLI sql query to get registered MGCP endpoints IP addresses?
Thank you in advance.

Hi,
these IP's aren't stored in the SQL DB.
Try RISDB:
admin:show risdb query gateway
----------- Gateway Information -----------
Number of Gateway entries: 412
#registered, #unregistered, #rejected, StateId, #ExpUnreg
216, 14, 182, 13605, 0
Seq#, Gateway Name, IPAddress, IPv6Address, Desription, DChannel #, DChannel Status, Perf Object, Reg Status, Model Type, Http Support, #Reg Attempts, Prod Id, Box Prod Id, RegStatChg TimeStamp
1, BRI/S0/SU0/[email protected], 10.14.71.44, , BRI/S0/SU0/[email protected], 0, UP, 12, unr, 121, no, 0, 90, 30060, 1425375416
Regards
Andre

Similar Messages

SQL query to find IP addresses in CUCM

Hi ,
we are using CUCM version 7 and need to find the IP addresses of applications like Unity connection, UCCX,Third party billing server by running SQL instead of seeing through GUI.
Please advise.
regds,
aman

admin:run sql select name, ipaddr from appserver
name ipaddr
========= =============
CUC8 10.x.x.x.
CUC9 10.x.x.x
This will give all entries under System > Application Server.

CUCM SQL Query AND statement

So either I'm dense or it just doesn't exist. All I really want is a report of what devices are associated to an application user. We have a situation wherein we have two CTI applications and if a single device is associated to both the world comes crashing down. I wasn't able to find this in the GUI interface so I took to the CLI via SQL and I have my query working.
The following syntax will spit back all associated devices for user X:
/*Show Devices associated with PBC-Genesys User*/
select d.fkdevice,dv.name as DeviceName
from applicationuserdevicemap as d
inner join device as dv on d.fkdevice=dv.pkid
where fkapplicationuser = '5cad9858-2934-82ae-e5a4-6822ac390ed0'
And by simply changing the fkapplicationuser I can see devices associated with user Y:
/*Show Devices associated with WBC-Genesys User*/
select d.fkdevice,dv.name as DeviceName
from applicationuserdevicemap as d
inner join device as dv on d.fkdevice=dv.pkid
where fkapplicationuser = '0bbacbb2-0c38-7023-936c-733aedd8a9d8'
Now I would think a simple AND at the bottom of this query would return me a list of devices that happened to be associated to both but that isn't the case. Is this possible? Here's what I tried that doesn't work.
/*Show Devices associated with PBC-Genesys AND WBC-Genesys Users*/
select d.fkdevice,dv.name as DeviceName
from applicationuserdevicemap as d
inner join device as dv on d.fkdevice=dv.pkid
where fkapplicationuser = '5cad9858-2934-82ae-e5a4-6822ac390ed0' AND fkapplicationuser = '0bbacbb2-0c38-7023-936c-733aedd8a9d8'
I'm the first to admit I suck at SQL but I'm trying slowly to wrap my head around it.
Thanks.

This should give you the required information:
admin:run sql select d.name, d.description from applicationuserdevicemap audm1, applicationuserdevicemap audm2, applicationuser au1, applicationuser au2, device d where audm1.fkdevice=d.pkid and audm2.fkdevice=d.pkid and audm1.fkapplicationuser=au1.pkid and audm2.fkapplicationuser=au2.pkid and au1.name='Service1' and au2.name='Service2'
name description
=============== ==================================
SEP123412341234 (1210999) Logged Out
SEP123412341235 (1210999) Logged Out
Just replace Service 1&2 with your exact servicename.
Hth
Andre

UCM Data Dictionary SQL Query for Determining IP Address

Forum,
I am trying to determine the IP address(es) of the UCM cluster servers. Using the UCM Data Dictionary and tables such as 'processnode' will provide information such as
procnodename                      description                isactive macaddr procnodeid systemnode typenodename typeprocessnode
================================= ========================== ======== ======= ========== ========== ============ ====================
EnterpriseWideData                                           t                1          t          Subscriber   CUCM Voice/Video
usa109-s4pub01                    UCM 10.0 Publisher         t                2          f          Publisher    CUCM Voice/Video
usa109-s4sub01                    UCM 10.0 Subscriber        t                3          f          Subscriber   CUCM Voice/Video
usa109-s4cup01.lab.shoregroup.com UC Presence 10.0 Publisher t                9          f          Publisher    CUCM IM and Presence
usa109-s4cup02.lab.shoregroup.com UC Presence 10.0 Publisher t                11         f          Subscriber   CUCM IM and Presence
'callmanager' table does not provide a field for IP...'processnode' only had 'ipv6name' field...
If the node using DNS to resolve name-to-IP as shown above...I have not found a way to obtain the IP address of the UCM node itself. I know I can go to the CLI of a node a issue a command to obtain...but I have not found a Data Dictionary table to obtain the results.
I am open for suggestions...thx.

If, in CCMAdmin, you've got server hostnames rather than IP addresses, CallManager will use DNS to get the IP addresses of the other servers.
GTG

SQL query or function...

Hi everyone,
Please help me to clarify this question
I have a "patient" table and a "address" table.And each patient has differnt types of addresses
like PMI,Mailing and default address i need to pick patient address in the order of preference
(PMI,Mailing ,Default)
I have two options to get the address of a patient.Either write a SQL query to get the address of a
patient(according to preference)
or write a function which checks
if there is PMI,Mailing and default
take PMI
or
If there is mailing and Default
take mailing
or
take default.
which one is the best method to get the address of a patient? SQL query or function..
Definitely everyone will say that it should be direct SQL query instead of multiple function calls.
But in my organization there are many developers which will get "patient address" in their application
or SQL code or PL/SQL code or from some
'X' Business intelligence tool.
At this scenario is it best to have a function which every one will call and get a standardized output
for every one.
Question:
In my scenario which one is the best to have "SQL query or function"?
if i choose "function" i have to sacrifice the performance
if i choose "SQL query" i am not sure whether each and every developer querying the same way as it would be
Sorry if it is a dumb question to ask.
Thanks in advance
phani

question for hoek: what if i have to choose between SQL query and function? (suppose they dont accept to create a view)If views are not accepted (which is very strange imo), but you do need some 'standard object' which everybody can use, then you'd choose to use a function instead of everybody having 'their own query'.
It's a trade-off between maintaining standards and performance (calling PL/SQL from SQL is usually to be avoided due to context-switching, the other way around is OK).
One advantage of a view: no hassle with parameters you have to enter but never will use, you just pick the columns you need and there you go.
Other one: it's straightforward, simple and clear.
It's easier to maintain.
But it all depends on what your function will return.
Perhaps a REF CURSOR?
Your question reminds me of this interesting discussion:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:672724700346558185
Edited by: hoek on Jul 1, 2009 4:39 PM tyop's

Using a SQL Query in an Alert and Matching a String

I've created an alert in 12.0.4 using a SQL Query and the field that I'm trying to match is a string. Originally the query returned multiple rows but when the alert still didn't fire, I modified the query WHERE clause to return only one row:
NAME RESPONSE
Are area lights working? No
My expression in the metric is RESPONSE. In the Monitor I'm matching a string equal to No. (Do I need double quotes around the matchvalue? Single quotes? No quotes?) The metric is in the 15min scan group, the role is xMII Developers and I'm in that role. The monitor alert string is ' = '. Both metric and monitor are active and I've subscribed to the monitor. Other alerts in the 15min scan group (all based on tag queries) are firing off properly.
Why is nothing showing up in the Alert Log?
David Macindoe

David,
Did you figure out the answer? If not, I will try to find someone to address your question.
Mike

HELP! SQL Query: Other ways to reorder column display?

I have a SQL query report with a large number of columns (users can hide/show columns as desired). It would be great if the column display order could be changed by changing the order of the columns in the SELECT list in the Report Definition, but that doesn't work -- it puts changed or added columns at the end regardless of the order in the SELECT list of the query.
Is there some other way to reorder the columns displayed without using the Report Attributes page? It's extremely tedious to move columns around using the up/down arrows which redisplays the page each time. Am I missing a way to change display order, or does anyone have a "trick" to do this? It's so painful....
When defining forms you can reoder columns by specifying a sequence number for each column. Just curious as to why reports were not done the same way, and are there any plans to address this in a future release?
Karen

Yes, reordering columns is extremely painful.
It is supposed to be much improved in the next version.
See
Re: Re-ordering columns on reports
Moving columns up/down in Report Attributes
See my example at
http://htmldb.oracle.com/pls/otn/f?p=24317:141
Basically, let the users move columns around until they are blue in the face, provide a Save button to save the column order in a user preference and reorder the columns when the page reloads.
Or you can use Carl's PL/SQL shuttle as the widget to specify the columns shown and their order. The shuttle is at http://htmldb.oracle.com/pls/otn/f?p=11933:27
Hope this helps.
Message was edited by:
Vikas

Can we generate the output of SQL Query in XML format ..

Hi Team,
Can we generate an XML doc for an SQL Query.
I've seen in SQL Server 2000.It is generating the output of an SQL Query in xml format.
select * from emp for xml auto
The output looks like
<emp EMPNO="7369" ENAME="SMITH" JOB="CLERK" MGR="7902" HIREDATE="1980-12-17T00:00:00" SAL="2800" DEPTNO="20"/><emp EMPNO="7370" ENAME="SMITH" JOB="CLERK" MGR="7902" HIREDATE="1980-12-17T00:00:00" SAL="2800" DEPTNO="10"/>

Just a little bit of short hand.
Get the XML out of your database, via HTTP
Of course the easiest method is just to return an XMLType from a stored procedure and let the calling routine figure out what to do with it. Instead
of that way though, I'll show you how to do it via HTTP. It's all completely built into 10g and is super easy to use.
CREATE OR REPLACE VIEW emps_and_depts AS
SELECT e.employee_id AS "EmployeeId",
e.last_name AS "Name",
e.job_id AS "Job",
e.manager_id AS "Manager",
e.hire_date AS "HireDate",
e.salary AS "Salary",
e.commission_pct AS "Commission",
XMLFOREST (
d.department_id AS "DeptNo",
d.department_name AS "DeptName",
d.location_id AS "Location"
) AS "Dept"
FROM employees e, departments d
WHERE e.department_id = d.department_id
Some people hear web and immediately start salivating about security issues. Let me address that quickly. Just because you have the HTTP and/or
FTP servers running in the database, that does not mean you have a security problem. For one, I would hope your databases are behind a firewall.
Second, with the correct architecture (DMZ, app servers, etc) you can make this data available outside the firewall fairly transparently and third,
just because it's on the web does not mean the data MUST be available on the internet. This is a good way to make your data available on your
intranet. If you are worried about people INSIDE your firewall, that still doesn't preclude web based access. Follow Oracle security guidelines.
Before I show you how to get to your data, let's talk about URLs and URIs. A URL is a Uniform Resource Locater and URI is a Uniform Resource
Identifier. A URL is the way you would identify a document on the net, i.e. http://www.oracle.com is a URL. A URI is a more generic form of a URL.
Oracle supports three types of URI: HTTPURIType - basically a URL (which would be like the URL above), XDURIType - a pointer to an XDB resource
(usually an XML document but can be other objects), and DBURIType - a pointer to database objects.
It's the DBURIType that we're going to concentrate on here. The DBURIType let's us reference database objects using a file/folder paradigm. The
format for a DBURI is /oradb/<schema>/<table>. Oradb is shorthand for the database; it is not the database name or SID. My database is named XE
but I still use oradb in the DBURI. For example, the view we created above is in my XE database, is owned by HR (at least in my case) and is called
EMPS_AND_DEPTS. This can be referenced as /oradb/HR/EMPS_AND_DEPTS.
If the view had many rows and you wanted only one of them, you can restrict it by including a predicate. The documentation for XDB has a great
write up on Using DBURIs.In our case, we are going to write out the entire document. Now that you understand that the DBURI is a pointer to
objects in our instance, we can use that to access the data as a URL.
The format for the URL call is http://<machinename>:<port>/<DBURI>
In my case, my XE database is running on a machine called mach1 and is listening on port 8080. So to see the view we created above, I open my
browser and navigate to: http//mach1:8080/oradb/HR/EMPS_AND_DEPTS
The created URL will be as http//mach1:8080/oradb/PUBLIC/EMPS_AND_DEPTS
If your database is set up correctly and listening on port 8080 (the default), your browser should ask you to login. Login as the user who created the
view (in my case HR). You should now get an XML document displayed in your browser.
And that's it. It doesn't get much simpler than that. If you get rid of the descriptive text above, it basically comes down to:
Create a table or view
Open your web browser
Enter a URL
Enter a user ID and password
View your XML
If you notice, Oracle formatted the data as XML for us. Our view returns scalar columns and an XML fragment called Dept. Oracle formatted the
return results into an XML format.
And as a side note, if you look closely, you'll see that my URL has PUBLIC where I said to put HR. PUBLIC is a synonym for all objects that your
logged in user can see. That way, if your user has been granted select access on many schemas, you can use PUBLIC and see any of them.

SQL Query(PL/SQL Function Returning SQL Query)

I am trying to write a dynamic report using SQL Query(PL/SQL Function Returning SQL Query).
I can get the report to run but I need to concatinate some columns into one, seperated by a comma or a dash.
I have tried select *****||','||***** alias
also select *****||'-'||***** alias
but I always get an error.
Is there a way of doing this please
Gus

This is my full query
declare
v_query varchar2(4000);
begin
if :P63_TRAN_INFO = 2 THEN
v_query := 'select
     A.FILENR,
     A.EXERCISENAME,
A.STARTDATE,
A.ENDDATE,
     A.UNIT,
A.ACCADDRESSES, B.ADDRESS, B.ADDRESS_1, B.POST_CODE, B.TOWN,
     A.EXERCISEAREAS,
     A.TOTALVEHICLES,
A.TOTALTROOPS+A.RNTOTALTROOPS+A.RAFTOTALTROOPS TOTALTROOPS,
A.CAR, A.MINIBUS, A.HGV,
A.NAMERANK, A.ADDRESS, A.ADDRESSI, A.ADDRESSII, A.POSTCODE,
A.TRANSIT,
A.INFOONLY
from     BFLOG_AT A, BFLOG_ACCADDRESS B
WHERE A.ACCADDRESSES = B.NAME
AND A.STARTDATE >= :P63_START_DATE
AND A.ENDDATE <= :P63_END_DATE
AND A.AUTHORISED = 1
AND A.INFOONLY = 1' ;
END IF;
RETURN v_query;
END;
This query runs ok, but if I try changing it to the code below with fields concatinated, then it fails
declare
v_query varchar2(4000);
begin
if :P63_TRAN_INFO = 2 THEN
v_query := 'select
     A.FILENR,
     A.EXERCISENAME,
A.STARTDATE,
A.ENDDATE,
     A.UNIT,
A.ACCADDRESSES||','||B.ADDRESS||','||B.ADDRESS_1||','||B.POST_CODE||','||B.TOWN ADDRESS,
     A.EXERCISEAREAS,
     A.TOTALVEHICLES,
A.TOTALTROOPS+A.RNTOTALTROOPS+A.RAFTOTALTROOPS TOTALTROOPS,
A.CAR, A.MINIBUS, A.HGV,
A.NAMERANK, A.ADDRESS, A.ADDRESSI, A.ADDRESSII, A.POSTCODE,
A.TRANSIT,
A.INFOONLY
from     BFLOG_AT A, BFLOG_ACCADDRESS B
WHERE A.ACCADDRESSES = B.NAME
AND A.STARTDATE >= :P63_START_DATE
AND A.ENDDATE <= :P63_END_DATE
--AND (A.EXERCISEAREAS LIKE "GAP, OA, OAL")
--OR (A.EXERCISEAREAS LIKE "Harz")
AND A.AUTHORISED = 1
AND A.INFOONLY = 1' ;
END IF;
RETURN v_query;
END;
Cheers
Gus

How to pull Roles and Policies from backend using SQL query in OIA

Hello,
I have Roles and Policies defined in OIA with mapping each other and there is no direct extract report from OIA Web console.
Is there any oracle SQL query by which we can get the data and filter the Policies based on the role ?
Note: We have one Role having more than one Polcies defined in OIA.
Appreciate your help.
Thanks

I am quoting this from MOS Doc Id "Why would multiple session records be present in the User Sessions screen in P6 Web, and why might some of them have different IP addresses? (Doc ID 1600172.1)"
Multiple sessions show up for users since different sections of P6 Web have their own sessions associated with them. If a user is authorized to use multiple areas of the software they will have multiple sessions each time they log in. Additionally, if users are closing their browsers before logging out of P6 Web Access you might see some past sessions still appearing in the list. These will eventually be cleared out by background jobs, however you can also reset the sessions in the software by clicking the "Reset User" link (Administer > User Sessions > Manage User Sessions), or by choosing the "Reset All Users" link (Administer > User Sessions > Manage User Sessions) to do this for all past sessions.
Multiple IP addresses for sessions can happen when a user logs in from different machines. For example, a person may login at their desk, but then go to a colleagues workstation to discuss a project, and log in from there. Doing so will leave them with multiple IP addresses in the session records.
Hope this helps
Regards,
Sachin Gupta

CUCM Database Query

We are in need of cross referencing or somehow consolidating our End User fields (user ID, Controlled Devices, and Primary Extension) with our phone DN fields (Directory Number, Associated Devices, and Line Text Label). I'm thinking the best way to go about this is through a SQL query but I'm just not familiar enough with the syntax or the CUCM database schema to get anything useful. There are a number of reasons we want this information:
1. We sync with LDAP and want to be sure that the Line Text Label field not only exists but also matches the LDAP synced User ID field.
2. Some end users have physical phones however do not have them assigned under Controlled Devices in End User configuration.
3. Some end users do not have the Primary Extension assigned to them under End User configuration or it is incorrect.
4. We want to verify that the Telephone Number field pulled from LDAP matches up with the users actual DN.
Thank you!
Michael M.

Under CUCM documentation, look for the Data Dictionary. Near the end there are a few pages where they show the relationships for some basic/core scenarios. (e.g. users, lines & devices)
Just be careful with the User<>Device association: There are multiple ways a user can be associated to a device!
You can either run SQL queries from the CUCM Command line ("run sql SELECT description FROM device WHERE name='SEP112233445566') or via AXL (A SOAP based API used to wrap SQL queries)
GTG

Emailing results of a SQL Query....

I am new to Oracle and was wondering if there is a way to create an email task that could be used to email results of a sql query. My query returns emails addresses that meet a specified criteria. I want to use an email task that takes these addresses as variables and sends out an email to the specified email address.
Anyone provide any help with how I might do this?
Thanks.

Hi,
The odiSqlUnload has a "select" command. Is possible, at your process, work with the "LPAD()" and/or "RPAD()" function to complete the necessary whitespace at each column?
To the column heading I suggest you use the "union" like: (I put the lpad and rpad fuctions as example...)
select col1, col2, col3
from(
select 1 as internal_order, 'header_col1' as col1, 'header_col2' as col2, 'header_col3' as col3
from dual
UNION
select 2 as internal_order, RPAD(col1, 10, ' ') as col1 , LPAD(col2, 50, ' ') as col2 , col3
from your_table)
order by internal_order
Do you think this will work for you?

401 Unauthorized after too many tables in AXL SQL Query

Hi...
I have an app that sends several AXL calls. All work fine with the exception of one accessing MGCP data via the AXL SQL QUERY command. I have found that if I only do a couple of tables it works fine, but if I had in more than 3 I get a 401 unauthorized return. Now, I know the commands are built correctly becuase its working for every other command in the set and like I said if I only do 3 or less tables the query works. Also, if I SSH into the CM locally and do run sql with the full command, it returns all tables fine, which leads me to believe this is a restriction in the return of the axl soap call...
Help?
I am using CM 6.0. The full query being passed in that returns 401 unauthorized is:
SELECT MGCP.pkid, MGCP.DomainName, TypeProduct.Name AS GatewayProduct, CallManagerGroup.Name AS CallManagerGroup, MGCPSlotConfig.Slot, TypeMGCPSlotModule.Name AS UnitModule, MGCPSlotConfig.Subunit AS SubUnitIndex, TypeMGCPVic.Name AS SubUnitProduct, TypeMGCPVic.MaxNumPorts, MGCP.VersionStamp, MGCP.SpecialLoadInformation FROM TypeMGCPVic RIGHT OUTER JOIN MGCPSlotConfig ON TypeMGCPVic.Enum = MGCPSlotConfig.tkMGCPVic LEFT OUTER JOIN CallManagerGroup RIGHT OUTER JOIN MGCP ON CallManagerGroup.pkid = MGCP.fkCallManagerGroup LEFT OUTER JOIN TypeProduct ON MGCP.tkProduct = TypeProduct.Enum ON MGCPSlotConfig.fkMGCP = MGCP.pkid LEFT OUTER JOIN TypeMGCPSlotModule ON MGCPSlotConfig.tkMGCPSlotModule = TypeMGCPSlotModule.Enum ORDER BY MGCP.DomainName, MGCPSlotConfig.Slot, UnitModule DESC, MGCPSlotConfig.Subunit"
Again, this works locally on the CM machine, it works if I pull back some of the tables... The AXL trace logs do not have errors, they just stop (with a return soap call that isnt passed back because 401 is recieved).
Thanks!

Here is the trace log. The return is there! It just never gets recieved.
2008-05-22 09:50:23,458 INFO [http-8443-Processor23] axl.AXLRouter - <?xml version="1.0" encoding="UTF-8"?>http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">http://www.cisco.com/AXL/API/6.0" xmlns:xsi="http://www.cisco.com/AXL/API/6.0" sequence="1">67a5af3c-878b-8dd3-2865-ca3ca007d2c22811-Test-VG1Cisco 2811Sub-Pub0NM-4VWIC-MBRD0VWIC2-1MFT-T1E1-T111209133478-fb3741a3-bb70-4013-90fa-734bea80f77267a5af3c-878b-8dd3-2865-ca3ca007d2c22811-Test-VG1Cisco 2811Sub-Pub0NM-4VWIC-MBRD1VWIC2-1MFT-T1E1-T111209133478-fb3741a3-bb70-4013-90fa-734bea80f77267a5af3c-878b-8dd3-2865-ca3ca007d2c22811-Test-VG1Cisco 2811Sub-Pub0NM-4VWIC-MBRD2VIC2-4FXO41209133478-fb3741a3-bb70-4013-90fa-734bea80f77267a5af3c-878b-8dd3-2865-ca3ca007d2c22811-Test-VG1Cisco 2811Sub-Pub0NM-4VWIC-MBRD3VIC-4FXS41209133478-fb3741a3-bb70-4013-90fa-734bea80f77243187db4-aa08-2141-a7eb-c865f45c5996Router.atrion.internalCisco 2811Pub-Sub0NM-4VWIC-MBRD0VWIC-2MFT-T121207845753-f4497a98-4ee7-42e7-9770-090898a52ca9eb492b1e-f238-ace9-3ffe-0a7b8765f364test-3845Cisco 3845Pub-Sub0NM-4VWIC-MBRD0VIC2-2MFT-T1E1-E121210884106-fa04b172-efe5-4ca0-9e44-1934af3fa7c6eb492b1e-f238-ace9-3ffe-0a7b8765f364test-3845Cisco 3845Pub-Sub0NM-4VWIC-MBRD1VIC2-2MFT-T1E1-E121210884106-fa04b172-efe5-4ca0-9e44-1934af3fa7c6
2008-05-22 09:50:23,461 INFO [http-8443-Processor23] axl.AXLRouter - Request 1211393338927 was process in 30ms

SQL query performance issues.

Hi All,
I worked on the query a month ago and the fix worked for me in test intance but failed in production. Following is the URL for the previous thread.
SQL query performance issues.
Following is the tkprof file.
CURSOR_ID:76 LENGTH:2383 ADDRESS:f6b40ab0 HASH_VALUE:2459471753 OPTIMIZER_GOAL:ALL_ROWS USER_ID:443 (APPS)
insert into cos_temp(
TRX_DATE, DEPT, PRODUCT_LINE, PART_NUMBER,
CUSTOMER_NUMBER, QUANTITY_SOLD, ORDER_NUMBER,
INVOICE_NUMBER, EXT_SALES, EXT_COS,
GROSS_PROFIT, ACCT_DATE,
SHIPMENT_TYPE,
FROM_ORGANIZATION_ID,
FROM_ORGANIZATION_CODE)
select a.trx_date,
g.segment5 dept,
g.segment4 prd,
m.segment1 part,
d.customer_number customer,
b.quantity_invoiced units,
--       substr(a.sales_order,1,6) order#,
substr(ltrim(b.interface_line_attribute1),1,10) order#,
a.trx_number invoice,
(b.quantity_invoiced * b.unit_selling_price) sales,
(b.quantity_invoiced * nvl(price.operand,0)) cos,
(b.quantity_invoiced * b.unit_selling_price) -
(b.quantity_invoiced * nvl(price.operand,0)) profit,
to_char(to_date('2010/02/28 00:00:00','yyyy/mm/dd HH24:MI:SS'),'DD-MON-RR') acct_date,
'DRP',
l.ship_from_org_id,
p.organization_code
from   ra_customers d,
gl_code_combinations g,
mtl_system_items m,
ra_cust_trx_line_gl_dist c,
ra_customer_trx_lines b,
ra_customer_trx_all a,
apps.oe_order_lines l,
apps.HR_ORGANIZATION_INFORMATION i,
apps.MTL_INTERCOMPANY_PARAMETERS inter,
apps.HZ_CUST_SITE_USES_ALL site,
apps.qp_list_lines_v price,
apps.mtl_parameters p
where a.trx_date between to_date('2010/02/01 00:00:00','yyyy/mm/dd HH24:MI:SS')
and to_date('2010/02/28 00:00:00','yyyy/mm/dd HH24:MI:SS')+0.9999
and   a.batch_source_id = 1001     -- Sales order shipped other OU
and   a.complete_flag = 'Y'
and   a.customer_trx_id = b.customer_trx_id
and   b.customer_trx_line_id = c.customer_trx_line_id
and   a.sold_to_customer_id = d.customer_id
and   b.inventory_item_id = m.inventory_item_id
and   m.organization_id
     = decode(substr(g.segment4,1,2),'01',5004,'03',5004,
     '02',5003,'00',5001,5002)
and   nvl(m.item_type,'0') <> '111'
and   c.code_combination_id = g.code_combination_id+0
and   l.line_id = b.interface_line_attribute6
and   i.organization_id = l.ship_from_org_id
and   p.organization_id = l.ship_from_org_id
and   i.org_information3 <> '5108'
and   inter.ship_organization_id = i.org_information3
and   inter.sell_organization_id = '5108'
and   inter.customer_site_id = site.site_use_id
and   site.price_list_id = price.list_header_id
and   product_attr_value = to_char(m.inventory_item_id)
call        count       cpu   elapsed         disk        query      current         rows    misses
Parse           1      0.47      0.56           11          197            0            0         1
Execute         1   3733.40   3739.40        34893    519962154           11          188         0
total           2   3733.87   3739.97        34904    519962351           11          188         1
|         Rows Row Source Operation
| ------------ ---------------------------------------------------
|          188 HASH JOIN (cr=519962149 pr=34889 pw=0 time=2607.35)
|          741 .TABLE ACCESS BY INDEX ROWID QP_PRICING_ATTRIBUTES (cr=519939426 pr=34889 pw=0 time=2457.32)
|    254644500 ..NESTED LOOPS (cr=519939265 pr=34777 pw=0 time=3819.67)
|    254643758 ...NESTED LOOPS (cr=8921833 pr=29939 pw=0 time=1274.41)
|          741 ....NESTED LOOPS (cr=50042 pr=7230 pw=0 time=11.37)
|          741 .....NESTED LOOPS (cr=48558 pr=7229 pw=0 time=11.35)
|          741 ......NESTED LOOPS (cr=47815 pr=7223 pw=0 time=11.32)
|         3237 .......NESTED LOOPS (cr=41339 pr=7223 pw=0 time=12.42)
|         3237 ........NESTED LOOPS (cr=38100 pr=7223 pw=0 time=12.39)
|         3237 .........NESTED LOOPS (cr=28296 pr=7139 pw=0 time=12.29)
|         1027 ..........NESTED LOOPS (cr=17656 pr=4471 pw=0 time=3.81)
|         1027 ...........NESTED LOOPS (cr=13537 pr=4404 pw=0 time=3.30)
|          486 ............NESTED LOOPS (cr=10873 pr=4240 pw=0 time=0.04)
|          486 .............NESTED LOOPS (cr=10385 pr=4240 pw=0 time=0.03)
|          486 ..............TABLE ACCESS BY INDEX ROWID RA_CUSTOMER_TRX_ALL (cr=9411 pr=4240 pw=0 time=0.02)
|        75253 ...............INDEX RANGE SCAN RA_CUSTOMER_TRX_N5 (cr=403 pr=285 pw=0 time=0.38)
|          486 ..............TABLE ACCESS BY INDEX ROWID HZ_CUST_ACCOUNTS (cr=974 pr=0 pw=0 time=0.01)
|          486 ...............INDEX UNIQUE SCAN HZ_CUST_ACCOUNTS_U1 (cr=488 pr=0 pw=0 time=0.01)
|          486 .............INDEX UNIQUE SCAN HZ_PARTIES_U1 (cr=488 pr=0 pw=0 time=0.01)
|         1027 ............TABLE ACCESS BY INDEX ROWID RA_CUSTOMER_TRX_LINES_ALL (cr=2664 pr=164 pw=0 time=1.95)
|         2063 .............INDEX RANGE SCAN RA_CUSTOMER_TRX_LINES_N2 (cr=1474 pr=28 pw=0 time=0.22)
|         1027 ...........TABLE ACCESS BY INDEX ROWID RA_CUST_TRX_LINE_GL_DIST_ALL (cr=4119 pr=67 pw=0 time=0.54)
|         1027 ............INDEX RANGE SCAN RA_CUST_TRX_LINE_GL_DIST_N1 (cr=3092 pr=31 pw=0 time=0.20)
|         3237 ..........TABLE ACCESS BY INDEX ROWID MTL_SYSTEM_ITEMS_B (cr=10640 pr=2668 pw=0 time=15.35)
|         3237 ...........INDEX RANGE SCAN MTL_SYSTEM_ITEMS_B_U1 (cr=2062 pr=40 pw=0 time=0.33)
|         3237 .........TABLE ACCESS BY INDEX ROWID OE_ORDER_LINES_ALL (cr=9804 pr=84 pw=0 time=0.77)
|         3237 ..........INDEX UNIQUE SCAN OE_ORDER_LINES_U1 (cr=6476 pr=47 pw=0 time=0.43)
|         3237 ........TABLE ACCESS BY INDEX ROWID MTL_PARAMETERS (cr=3239 pr=0 pw=0 time=0.04)
|         3237 .........INDEX UNIQUE SCAN MTL_PARAMETERS_U1 (cr=2 pr=0 pw=0 time=0.01)
|          741 .......TABLE ACCESS BY INDEX ROWID HR_ORGANIZATION_INFORMATION (cr=6476 pr=0 pw=0 time=0.10)
|         6474 ........INDEX RANGE SCAN HR_ORGANIZATION_INFORMATIO_FK2 (cr=3239 pr=0 pw=0 time=0.03)Please help.
Regards
Ashish

|    254644500 ..NESTED LOOPS (cr=519939265 pr=34777 pw=0 time=3819.67)
|    254643758 ...NESTED LOOPS (cr=8921833 pr=29939 pw=0 time=1274.41)There is no way the optimizer should choose to process that many rows using nested loops.
Either the statistics are not up to date, the data values are skewed or you have some optimizer parameter set to none default to force index access.
Please post explain plan and optimizer* parameter settings.

Sql query runing slow with lower cost

Hello
I am working on Oracle 11g and AIX.I have one sql query which is ruing slow as reported by user.
When i am commenting few line of code it is runing fast.
I noticed that the execution plan cost of first query is less and second ...as cost of sccond qurey is more.But users are say it is runing fast.
How it can possiable ?
Any idea why second query is runing fast after commenting few columns in select and group by clause.
Query 1
SELECT PH.CTRL_NBR, PD.SEQ_NBR,PH.CNTRY,PH.SHIP_DATE, PHI.WAVE_NBR, PD.ID, PD.QTY,
IM.PACK_QTY,
IM.UNIT_VOL,
IM.PACK_QTY,
MAX(CD.PACK_QTY) AS CASE_QTY,
IM.UNIT_WT
FROM HDR PH,
HDR_INTRNL PHI,
DTL PD,
HDR CH,
CASEDTL CD,
IMASTER IM
WHERE PH.CTRL_NBR = PHI.CTRL_NBR
AND PD.CTRL_NBR = PH.CTRL_NBR
AND PD.QTY > 0
AND SUBSTR(CD.ID, 1, 9) = SUBSTR(PD.ID, 1, 9)
AND CD.CASENBR = CH.CASENBR
AND CH.STAT_CODE BETWEEN '10' AND '90'
AND IM.ID = PD.ID
AND PHI.WAVE_NBR='EL57893'
GROUP BY PH.CTRL_NBR, PD.SEQ_NBR, PH.CNTRY, PH.SHIP_DATE, PHI.WAVE_NBR, PD.ID, PD.QTY,
IM.PACK_QTY,
IM.UNITVOL,
IM.UNITWT,
IM.PACK_QTY
Query 2 .
SELECT PH.CTRL_NBR,
PD.SEQ_NBR,
PH.CNTRY,
PH.SHIP_DATE,
PHI.WAVE_NBR,
PD.ID,
PD.QTY,
-- IM.PACK_QTY,
-- IM.UNIT_VOL,
-- IM.PACK_QTY,
MAX(CD.PACK_QTY) AS CASE_QTY,
-- IM.UNIT_WT
FROM HDR PH,
HDR_INTRNL PHI,
DTL PD,
HDR CH,
CASEDTL CD,
IMASTER IM
WHERE PH.CTRL_NBR = PHI.CTRL_NBR
AND PD.CTRL_NBR = PH.CTRL_NBR
AND PD.QTY > 0
AND SUBSTR(CD.ID, 1, 9) = SUBSTR(PD.ID, 1, 9)
AND CD.CASENBR = CH.CASENBR
AND CH.STAT_CODE BETWEEN '10' AND '90'
AND IM.ID = PD.ID
AND PHI.WAVE_NBR='EL57893'
GROUP BY PH.CTRL_NBR, PD.SEQ_NBR, PH.CNTRY, PH.SHIP_DATE, PHI.WAVE_NBR, PD.ID, PD.QTY,
--IM.PACK_QTY,
--IM.UNITVOL,
--IM.UNITWT,
--IM.PACK_QTY
Edited by: oradba11 on Sep 6, 2012 2:11 PM
Edited by: oradba11 on Sep 6, 2012 2:12 PM

oradba11 wrote:
Hello
I am working on Oracle 11g and AIX.I have one sql query which is ruing slow as reported by user.
When i am commenting few line of code it is runing fast.
I noticed that the execution plan cost of first query is less and second ...as cost of sccond qurey is more.But users are say it is runing fast.
How it can possiable ? <snip>
This doesn't address your question, but let me suggest that for your own sanity you start brining some formatting to your sql. And for the sanity of those on this forum of whom you expect assistance, you preserve that formatting through the use of the code tags (see the FAQ for details).
I've done the first one for you, as an example of what I mean
SELECT
     PH.CTRL_NBR
,     PD.SEQ_NBR
,     PH.CNTRY
,     PH.SHIP_DATE
,     PHI.WAVE_NBR
,     PD.ID
,     PD.QTY
,     IM.PACK_QTY
,     IM.UNIT_VOL
,     IM.PACK_QTY
,     MAX(CD.PACK_QTY) AS CASE_QTY
,     IM.UNIT_WT
FROM
     HDR PH
,     HDR_INTRNL PHI
,     DTL PD
,     HDR CH
,     CASEDTL CD
,     IMASTER IM
WHERE
     PH.CTRL_NBR = PHI.CTRL_NBR
   AND PD.CTRL_NBR = PH.CTRL_NBR
   AND PD.QTY > 0
   AND SUBSTR(CD.ID, 1, 9) = SUBSTR(PD.ID, 1, 9)
   AND CD.CASENBR = CH.CASENBR
   AND CH.STAT_CODE BETWEEN '10' AND '90'
   AND IM.ID = PD.ID
   AND PHI.WAVE_NBR='EL57893'
GROUP BY
     PH.CTRL_NBR
,     PD.SEQ_NBR
,     PH.CNTRY
,     PH.SHIP_DATE
,      PHI.WAVE_NBR
,      PD.ID
,      PD.QTY
,      IM.PACK_QTY
,     IM.UNITVOL
,     IM.UNITWT
,     IM.PACK_QTY

CUCM SQL Query - MGCP EPs IP Addresses

Similar Messages

Maybe you are looking for