CUPS print job options fail when called from lp (UNIX command line)
Under Leopard this command-line print request fails to respect the specified job options:
lp -o number-up=2 -o page-border=double <filename>
Though it worked great in Tiger, the number-up and page-border job options are now disregarded. I have tried lots of things (and wasted lots of paper) such as setting them permanently with lpoptions (and they do appear changed when the lpoptions command is repeated), using lpr instead of lp, reinstalling the printer via the CUPS localhost web interface, enabling non-Bonjour scanning with the hack to the CUPS preference file, deselecting "Last Printer Used" for the default printer in the System Preferences -- nope.
I have not tried other job options; I assume that whatever is breaking these two is breaking all the others, and even if it isn't, these two are what I want.
Is something new in Leopard overriding lpoptions job options? How do I make it stop? It is sooooo aggravating when something that used to work fine breaks. The printer is an HP LaserJet 4000N connected by Ethernet and discovered with AppleTalk.
Thanks for any advice!
Thanks John, I did search but somehow missed that thread.
However it did not help. With or without the "-p printername" argument lpoptions does make a persistent change to its own data:
+$ lpoptions+
+media=Letter sides=one-sided finishings=3 copies=1 job-hold-until=no-hold job-priority=50 number-up=2 auth-info-required=none job-sheets=none,none printer-info=Barrow printer-is-accepting-jobs=1 printer-is-shared=0 printer-location='Local Zone' printer-make-and-model='HP LaserJet 4000 Series' printer-state=3 printer-state-change-time=1209495301 printer-state-reasons=none printer-type=2134228 page-border=double+
You can see that the printer "Barrow" has remembered "number-up=2" and "page-border=double". Regardless if I give any of these commands:
+lpr <filename>+
+lpr -P Barrow <filename>+
+lp <filename>+
+lp -d Barrow <filename>+
none of them show the results of these option settings (and somewhere in the forest another tree is cut down).
Similar Messages
-
Unable to run reports from the unix command line
hi
all of a sudden i am unable to run reports ( on App server 10g) either from the unix scripts or from the unix command line. But i can run them from the forms.
Any one have any idead about this.
Thank youthanks all for replying
i have set the env variables for the session and it worked. Looks like i have to set the oracle_home and ld_library_path every time ( opening a new putty session) i call sqlldr.
But in a whole i am trying to run sql loader from the forms. Right now we have Oracle app server 10g which forms 10g version. As oracle app server 10g didnt come with sqlldr, we are copied the sqlldr of database on to app server with different home. after this we can run sqlldr ( on app server ) from unix scripts but not from Forms. Then we opened a qurey with oracle about app server 10g not commig with sqlldr and its remedy . But they said that they dont have specific remedy for that and suggested the same what we did.
So we came up with java package which does the same funtion as host command and trying to run sqlldr which is on the database( ie replacing the host command in the forms with the database funtion). By using that funtion i am able to run the sqlldr from sql plus but not from forms. I couldnt easily debug it as i wont through any error messages.
Any one have any idea of this ...
Thank you -
How can I import eex files into Applications EUL from the unix command line
How can I import *.eex and *.dis files into an Applications EUL from the unix command line?
ThanksHi
The simple answer is you either have to use the client tool DIS51ADM to import files using the command line (Discoverer Admin is a windows only client tool), or the Java command line which needs a browser.
In theory if you have a browser running on your Unix box you may be able to use the Java command line to make this work.
Best wishes
Michael -
Crystal Reports 2008 fails when called from e Web Service under 64bit OS
I have discovered that Crystal Reports 2008 doesn't work when called from a Web Service running under 64bit Windows platforms (in my case Windows 2003 Server and Windows XP 64bit); practically no object is instantiated. I've tried several solutions without success.
Before creating a wrapper component to use under COM+, is there anybody who has a better and cheaper solution than creating another component to wrap CR 2008 ?Hi Sergio,
Before I mark this post as assumed answered I would just like to say and re-iterate that at this time there is no one answer and we fully understand your concerns. As you know in CR 6.0 it came in 16 and 32 bit versions because at the time 32 bit was relatively new but 16 bit was the norm. This is also true for 32 to 64 bit, 32 is the norm and 64 bit is relatively new. We know and are well aware 64 bit is the future and we are working as quickly as we can to move in that direction. Because of the complexity of the Product it's not simply a matter of re-compiling all of our dll's in 64 bit format. The core of our data connectivity with our database drivers which are dependant on third party clients must also need to support 64 bit modes. This as well as Printer drivers also need to be 64 compatable, there are a multitude of dependencies that we rely on that must add 64 bit support. As a programmer you are well aware of the issues around Thunking back and forth between 32 to 64 bits, it can cause delays and potentially loss of data which is a whole other issue. Not to mention also that we would have to ship both versions potentially doubling the size of the distribution packages or doubling the size of the dll's to have the ability to work in both modes. Relatively speaking of course, it would not be double the size but the variables would need to be able to allocate 32 or 64 memory blocks.
The other option is to produce 2 separate versions, this alone is a massive project. Any issue would need to be fixed in separate code streams.
So I'm sure you can see it's not simply a matter of saying yes we support 64 bit. It's a massive project that is going to take time to do and we have to wait for the third party drivers to commit also.
Visual Studio .NET 2005 and 2008 is the only option if you want true 64 bit but you will be limited on what DB's you can support and export formats you can export to. They are the only drivers we did convert to 64 bit.
Thank you for your understanding
Don -
Journal import fails when called from PLSQL
Hi,
When journal import is called from plsql code it is failing with error in 'gllacc() Function returning without value and no data found'.
Same transaction is run succesfully from front end.
I checked both gl_interface and gl_interface_control table but couldnt find the issue.
Any info on this would be very helpful.
Thanks
SandhyaFOR l_rec IN (SELECT ledger_id,group_id from apps.gl_interface
WHERE status='NEW'
AND user_je_source_name='GIS_DATA_CONVERSION'
GROUP BY ledger_id,group_id
ORDER BY group_id
LOOP
apps.gl_journal_import_pkg.populate_interface_control (user_je_source_name => 'GIS_DATA_CONVERSION',
GROUP_ID => l_rec.group_id,
set_of_books_id => l_rec.ledger_id,
interface_run_id =>vl_interface_id,
table_name => 'GL_INTERFACE',
processed_data_action=>'D'
COMMIT;
vl_request_id := apps.fnd_request.submit_request (application => 'SQLGL', -- application short name
program => 'GLLEZLSRS', -- program short name
description => NULL, -- program name
start_time => NULL, -- start date
sub_request => FALSE, -- sub-request
argument1 => 2065, --Data access set id
argument2 => 'GIS_DATA_CONVERSION', --Source
argument3 => l_rec.ledger_id, -- set of books id
argument4 => l_rec.group_id,
argument5 => 'N', -- error to suspense flag
argument6 => NULL, -- create summary flag
argument7 => 'N' -- import desc flex flag
COMMIT;
IF ( vl_request_id = 0 ) THEN
xxgis.gis_conv_util_pkg.debug_print_p(1,'FND_LOG','E001: Journal Import Submission Failed. ' || SQLERRM);
retcode := 2;
EXIT;
ELSE
xxgis.gis_conv_util_pkg.debug_print_p(1,'FND_LOG','P001: Submitted Journal Import Program for group id: ' || l_rec.group_id ||
'and ledger :'||l_rec.ledger_id|| ', Request ID: ' || vl_request_id);
END IF;
END LOOP; -
How to avoid the printer device option screen when calling smartform?
Dear gurus
i have create a smartform and i have called it from my program.
i dont want to show the printer device options how can i achieve that ?
below is the code for calling my smartform.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZSNAK_VF03_PRINTING'
IMPORTING
fm_name = smart_form_function_nm
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
CALL FUNCTION smart_form_function_nm
EXPORTING
itab1 = itab1
temp4 = temp4
temp3 = temp3
ref_doc_no = ref_doc_no
po_no = po_no
printno = printno
TABLES
itab_tab = itab_tab
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
Regards
Saad Nisar.Hi,
check this link
smartforms - print option
Regards and Best wishes. -
LocateRegistry.getRegistry() fails when called from Tomcat 5.5 servlet
I'm trying to access a simple RMI server from a Tomcat 5.5 (Java 5) servlet. I get access exceptions having to do with java.util.logging.LoggingPermission. (The RMI server works fine with a simple command line Java app.)
Is there some reason that calling getRegistry() from within a servlet should fail? Is there some reason that it should require LoggingPermission?
I've modified the catalina.policy file to grant all permission to everything but I still get the same errors.
Surely there is a way to make RMI calls from a servlet. Any suggestions on how to fix this? Thanks.show us the script
-
Deployment failing when running .bat script or command line file package
HI Guys,
I am trying to run a .bat file on a client using a program. My data source point to the script's folder.
I keeps failing with error 1.
I have trying making run in 64-bit using this without luck: http://madluka.wordpress.com/2012/09/24/configmgr-2012-64bit-file-system-redirection-bites-again/
Here is the content of my .bat file:
@ECHO OFF
IF NOT "%PROCESSOR_ARCHITEW6432%"=="AMD64" GOTO native
ECHO "Re-launching Script in Native Command Processor..."
%SystemRoot%\Sysnative\cmd.exe /c %0 %*
EXIT
:native
ECHO "Running Script in Native Command Processor..."
c:\
cd c:\windows\System32
start cmd.exe /c shutdown -l
stop
I will get the same error when running a simply command line as well. Instead of a .bat file.
any ideas?Maybe this will help you:
http://blog.coretech.dk/kea/configuration-manager-shutdown-utility
This instead of using "shutdown.exe -l" command. This tool can be used for logoff also. Hope it helps!
My blogs: Henk's blog and
Virtuall | Follow Me on:
Twitter | View My Profile on:
LinkedIn -
Running Mac apps from the Unix command line
I hope I don't offend Mac lovers with this question, but as a total Mac newbie, I find Finder cumbersome. This may change as I learn all the features and keyboard shortcuts. but I don't think so. I've been playing with computers for 40 years and Unix for 30 and I know what I like. I like a command line interface, and prefer to avoid the point and squint interface to the extent possible.
I'd prefer to run everything from the shell, and not finder. So to run safari, I'd like to do something intuitive (to me, at least) like type ...
bash# safari
... instead of marching around in Finder or using the dock and the mouse.
Can any of you Mac hackers give an old Unix hacker a pointer to a clue?Yes, I'm way too cheap to buy the book. I can't imagine how much I've saved over the years, always being way too cheap to buy the book. Easily enough to pay for the spiffy new computer.
No Windoze experience? You may think you do, but really, you don't know how lucky you are. My Vaxen ran 4.1 BSD though 4.3 BSD. I've played with a lot of flavors of unix. My favorite flavor in recent years has been FreeBSD, so I began paying close attention to the Mac since OS X.
X11 and Xcode were the first things I installed. I've been poking around, reading the docs, and getting a better handle on it all. I've only scratched the surface of the stuff on your pages, and it's been most helpful. There's good stuff there for unix newbies too.
If it were not for Jerry Garcia, I probably never would have had the stones to open my mouth in front of a microphone. -
Insert using Spatial Index fails when called from PHP
I have a stored procedure that inserts into a table with a spatial index on one of its fields.
When I run the procedure from SQL Server Management Studio it runs just fine.
When I run it from PHP, it returns the error: "INSERT failed because the following SET options have incorrect settings: 'CONCAT_NULL_YIELDS_NULL, ANSI_WARNINGS, ANSI_PADDING'. Verify that SET options are correct for use with indexed views and/or indexes
on computed columns and/or filtered indexes and/or query notifications and/or XML data type methods and/or spatial index operations"
From within Management Studio, I have tried many different combinations of settings, until I wound up with the list I have in the procedure below.
Within Managment Studio the error changes based on the options I have set, but PHP always replies with: 'CONCAT_NULL_YIELDS_NULL, ANSI_WARNINGS, ANSI_PADDING'
I have configured PHP to use the same SQL user as management studio, and I have tried both mssql_query and mssql_execute with bound parameters.
The spatial index is on the field post.location If I remove the spatial index it works, but I need the spatial index.
CREATE PROCEDURE insert_post ( @subject AS VARCHAR(250), @body AS VARCHAR(2000), @latitude AS FLOAT, @longitude AS FLOAT ) AS BEGIN
SET NOCOUNT ON
SET ANSI_WARNINGS ON
SET ANSI_PADDING ON
SET CONCAT_NULL_YIELDS_NULL ON
SET NUMERIC_ROUNDABORT OFF
DECLARE @location AS geography = geography::Point(@latitude, @longitude, 4326)
INSERT INTO post
subject,
body,
location
) VALUES (
@subject,
@body,
@location
ENDHi Charles
Your issue looks like it have two basic sources: (1) The connection string properties, (2) The table structure and the data which you try to insert.
(1) The connection string properties can be specified in various ways.
You can set most of them during the connection, depending on the provider which you are using. We did not get from you any information about the PHP code, so we have no information regarding this part.
The connection properties can be changed after the connection was made, which is basically what you have try to do. But we don't know what properties
are differents (since you .. the PHP code..) but you can check those properties dynamically, insert them to a table and then compare. To check all the properties you can use this post:
http://ariely.info/Blog/tabid/83/EntryId/153/SQL-Server-Get-Connection-Properties.aspx
(2) We need to understand your
table structure and compare it to yours query. Please post your DDL+DML (queries to create the table and to insert some sample data), and the full SP code
as it is now.
[Personal Site] [Blog] [Facebook] -
Stored procedure runs fine from SSMS but fails when called from the C# app
I'm using SS Express 2012 so I doubt I have all possible debugging capabilities at my disposal, although I'm still trying to figure this out myself.
The compiled C# application has logging to insure that the the SP is being invoked, the appropriate line of code is definitely being reached. The logging always reports 'success' suggesting that the SP was successfully executed (and no exception is thrown
to the C# app), but the indexes aren't getting rebuilt (I have a fragmentation query proving they are not rebuilt). Yet it runs successfully if I
(1) set a breakpoint in the C# app and step through the code line by line OR
(2) run the SP from the SSMS GUI.
The fragmentation query confirms sucess for both 1 and 2.
-I can't rely on the GUI because I want to run this overnight immediately after the C# app is finished inserting new records.
- The SP loops through all the tables, and all the indexes in each table, checking for fragmentation and rebuilding any indexes over 7% fragmented.
ALTER Procedure [dbo].[usp_RebuildIndexes]
AS
Declare @fetch_TableName NVARCHAR(256)
DECLARE Cursor_Tables CURSOR FOR
SELECT Name FROM sysobjects WHERE xtype ='U'
OPEN Cursor_Tables
While 1 = 1 -- Begin to Loop through all tables
BEGIN
FETCH NEXT FROM Cursor_Tables INTO @fetch_TableName -- fetches the next table
if @@FETCH_STATUS <> 0 break
print '---------' + @fetch_TableName
Declare @fetch_indexName NVARCHAR(256) -- loops through al indexes of the current table
DECLARE Cursor_Indexes CURSOR FOR -- Looking for indexes fragmented more than 7 percent.
SELECT name as indexName
FROM sys.dm_db_index_physical_stats (DB_ID(DB_Name()), OBJECT_ID(@fetch_TableName), NULL, NULL, NULL) AS a
JOIN sys.indexes AS b ON a.object_id = b.object_id AND a.index_id = b.index_id
Where Name is not null and avg_fragmentation_in_percent > 7
OPEN Cursor_Indexes
WHILE 1= 1 -- Begin to Loop through all Indexes
BEGIN
FETCH NEXT FROM [Cursor_Indexes] INTO @fetch_indexName
if @@FETCH_STATUS <> 0 break
Declare @SqL nvarchar(2000) = N'ALTER INDEX ' + @fetch_indexName + ' ON ' + DB_Name() + '.dbo.' + @fetch_TableName + ' Rebuild'
print @Sql
Begin TRy
Execute sp_executeSQL @sql
End Try
Begin Catch
Declare @err nvarchar(2000) = ERROR_MESSAGE();
throw 51000, @err, 1
End Catch
End -- Ends looping through all indexes
CLOSE [Cursor_Indexes]
DEALLOCATE [Cursor_Indexes]
End -- Ends looping through all tables
CLOSE Cursor_Tables
DEALLOCATE Cursor_Tables
foreach (objDB DB in oUserPrefs.DBs) {
report += DB.Real_Name;
if (DB.cn == null) DB.cn = sqlCn(DB.Real_Name, SystemInformation.ComputerName);
try {
if (DB.cn.State != ConnectionState.Open) DB.cn.Open();
} catch (Exception ex) {
report += " - Failed because can't open a connection.\r\n";
continue;
DB.OpenedAConnection = true;
DataTable dt = null;
try {
dt = oParam.fillDt("dbo.usp_RebuildIndexes", DB.cn, null);
} catch (Exception ex) {
report += " -failed because " + ex.Message + "\r\n\r\n";
continue;
report += " - success.\r\n";
DB.LastTimeRebuiltIndexes = DateTime.Now;Your proc is a bit of a mess and hard to read. This should get you what you need though. I added a little logic in the middle that determines if the index should be reorged, or rebuilt.
You were right that my script was too messy and I used your code/logic to rewrite mine. Thanks! I tried it this morning and it worked fine, but I will have to see how it runs overnight to be sure.
Here's the weird thing. My original code should have worked. In fact I'm actually using it in 3 c-sharp apps each of which has 3 to 7 Express 2012 databases (about 10 million records per database). For about a month it's been working fine on two of the
apps. Furthermore this morning I used a commercial file-comparison tool to verify that the 3rd app has been running an identical version of the SP. So I'm at a total loss as to what went wrong in the 3rd app.
Here's my rewrite.
Alter Procedure [dbo].[usp_RebuildIndexes]
As
Declare @Messages Table(Msg nvarchar(2000))
Declare @IndexName nvarchar(256), @TableName NVARCHAR(256)
DECLARE Cursor_Indexes CURSOR FAST_FORWARD FOR -- GEt a list of all indexes for all tables.
select idxs.name as indexName, o.Name as TableName
from sys.indexes idxs
inner join sysobjects o on idxs.object_id = o.id
inner join sys.dm_db_index_physical_stats (DB_ID(), NULL, NULL,NULL,NULL) as stats
on stats.object_id = idxs.object_id and stats.index_id = idxs.index_id
where xtype = 'u' and idxs.name is not null And avg_fragmentation_in_percent > 7
OPEN Cursor_Indexes
While 1 = 1
BEGIN
FETCH NEXT FROM Cursor_Indexes INTO @IndexName, @TableName
if @@FETCH_STATUS <> 0 break
Declare @SqL nvarchar(2000) = N'ALTER INDEX ' + @IndexName + ' ON ' + DB_Name() + '.dbo.' + @TableName + ' Rebuild'
insert @Messages(Msg)VALUES(@sql)
Execute sp_executeSQL @sql
End
CLOSE [Cursor_Indexes]
DEALLOCATE [Cursor_Indexes]
Select * From @Messages -
Mapedit fails when called from Visio, but works in Project
Hi -
I'm writing some vba code in Visio that 1. opens a selected Project file, 2. creates a Map, and 3. exports that map data to Excel. I've got the rest of the code working, but I get an error 1101 / argument value is not valid with this statement.
The MS Project code that works when run in Project is this:
Application.MapEdit name:="visio_HLS_export", Create:=True, OverwriteExisting:=True, _
DataCategory:=pjMapTasks, CategoryEnabled:=True, TableName:="tasks", _
FieldName:="Unique ID", ExternalFieldName:="TaskUID", ExportFilter:="IsMilestoneFlag"
The code in Visio is the same, except the "Application" object is replaced with my MSProject object (mspApp). I've got a similar routine set up to create the "IsMilestoneFlag" filter, and that is working fine. The filter is created in
the local organizer, then copied to Global.mpt, so it should be able to find it. Not sure what else could be causing the failure.
Set mspApp = CreateObject("MSProject.Application")
mspApp.MapEdit Name:="visio_HLS_export", Create:=True, OverwriteExisting:=True, _
DataCategory:=pjMapTasks, CategoryEnabled:=True, TableName:="tasks", _
FieldName:="Unique ID", ExternalFieldName:="TaskUID", ExportFilter:="IsMilestoneFlag"
Any ideas?matttjo,
This might be s shot in the dark, but looking at the MapEdit Method, the only argument that is suspect when controlling Project from another app is the DataCategory argument. All other arguments are either string, or boolean. You might try adding a reference
to the DataCategory, something like:
DataCategory:=mspApp.pjMapTask
Since all arguments of the method are optional, you could try eliminating one at a time (or adding one at a time) and see which one causes the problem.
Hope this helps.
John -
How to make "Adobe PDF" printer quiet (no banner) when called from MSAccess?
I have an Access Database which creates reports set up to print to the "Adobe PDF" printer (Acrobat Standard 7.0.7). Everything works great except the pop-up progress window appears during printing and takes over windows control briefly, then when printing finishes, it closes and gives back control to the other window. This makes running large batch .pdf creating operations very intrusive.
How do I make it not display the banner/progress pop-up during printing?
Thanks,
Tim JamesThanks very much for the information, I was not aware of LiveCycle PDF Generator.
Looking (briefly so far) into the available info it states:
"Import, export, and manipulate attachments, annotations, links, and bookmarks in an XML format"
This sounds like my unrelated goal of implementing something that can take an existing .pdf and a ist of phrase-hyperlink pairs and add links to the given hyperlink to every occurrence of the given phrase would be much better implemented using LiveCycle PDF Generator rather than Acrobat. -
BAPI_GOODSMVT_CREATE u2013 Collective slip not printed when called from Biztalk
Hi Experts,
Iu2019m trying to call BAPI_GOODSMVT_CREATE from within a Biztalk Orchestration.
Everything works fine except for one thing: The printing of the collective slip.
I made a quick test and the collective slip is printed when I call BAPI_GOODSMVT_CREATE from transaction SE37 (Test Sequences).
I have used exactly the same parameters for the two cases.
I can see that when I call the BAPI from SE37, an output is generated for the material document (MB03 / details / messages).
This is not the case when the call comes from Biztalk.
I followed the documentation and the notes 520813 (Question 12), 426554.
This means that:
- The user executing the BAPI has the parameter NDR set to u2018Xu2019 in his profile.
- VER_GR_GI_SLIP is set to u20183u2019 to ask for the collective slip print out.
- VER_GR_GI_SLIPX is set to u2018Xu2019 to enable the print out.
What should I do to be able to print a collective slip when calling the BAPI from Biztalk ?
Thank you in advance for your help,
Francisu2026hi,
check out this thread.
Re: User Exit for MSC2n( Batch) while doing a Good receipt for an order
Ashutosh -
A user is having trouble printing. Print jobs take FOREVER when they used to speed through
A user is having trouble printing. Print jobs take FOREVER when they used to speed through (despite linked images, etc)
These are just some notes from our troubleshooting:
User was trying to print out InDesign document however during the flattening phase, the computer would stall and would not print out the document.
The document does not print out using double sided or single sided.
The first time I went out, all I did was a system restore and uninstalled mcafee security plus because we're on a university network and sometimes the firewall blocks network printing, and that worked. She tried to print again later and it went back to taking 30 minutes for a print job of about 19 pages. These print jobs used to take about 5 minutes at the most to print entirely, but they queued up immediately, versus now, it takes about 5 minutes just to get to the printer.
Further troubleshooting that I did on a separate day:
Printer was printing fine in November - problem started at some point this month (December)
Printing is fine elsewhere, including in Adobe Acrobat
I was able to print one page just fine - it had no images (tried to print the same page later, took forever)
Some of the images are very large (100MB+) photoshop files (again, they were there before and it printed fine) - these images are linked (with no link errors)
She prints to a network printer, but there's no firewall on (again, printing is fine elsewhere)
She's essentially printing with the default settings, she just centers her print, instead of the default layout.
Now even printing with the default print set (not changing any print settings at all) doesn't work. Jobs take 30 minutes. I can't figure out if it's file specific or where the problem is. Since she has no custom settings, my next option is to just do an uninstall and reinstall, but I'm worried that the problem will still be there. I was starting to think that maybe the file is just so corrupted from all the force quits that that's causing the problem, but... I'm running out of solutions.
Any help?I have only worked doing layout for one business in my past. In that job our department would sometimes experience slowdown in printing from time to time. However, we began to see extreme slowdowns over a month period. It was finally tracked down to two things. One was something about the RAID array going bonkers. The other was some of the CAT cabling going bad. It only affected large print jobs and copying large files through the network. Even so, it was not 100% of the time. Sometimes things went along smoothly.
Point is, have your IT people been invited in to experience the issue and see if anything in the network is causing at least latency issues?
Take care, Mike
Maybe you are looking for
-
When I try and sign in to the App Store, I get an error message that says "An unknown error has occurred". The Apple Store told me to contact Apple Care which I did. They determined it was not an issue with my computer and thought it was an issue wit
-
Hi, please would some one help? My screen, usually after I have moved my macbook pro, suddenly darkens and the lightens and flashes beteen the two sometimes for long periods of time...I've tried to calibrate and turn off the ambient lighting adjustme
-
How do I enable the "Retry Job" and "Cancel Job" icons on the Project Server Queue?
Judy Washington
-
Bind values for complex datatype in Oracle trace file
If I run trace on oracle spatial queries, how can I get the detailed information of the bind variable value for sdo_geometry objects (the content of the sdo_geometry objects, e.g. coordinates... ) in the queries? For example, in the query, SRID, SDO_
-
Hello, I´m unable to backup my database. In db2diag.log i found some errors like this: 2010-05-07-08.14.43.548903+120 E27412268A592 LEVEL: Error PID : 19510 TID : 95 PROC : db2sysc 0 INSTANCE: db2fdj NO