Current Active Optimized TCP Preposition Flows: 24 - Limit ?

Hi all
I have 2 x wae-7341 devices in a farm at our data centre.  I have a preposition job running to serve some data to approx 100 edge SRE's. 
This has been running for a few nights (due to schedule) and I have been checking b/w usage at our core WAN link.
This only ever reaches approx 1/3 of capacity and I started wondering why we were not driving more data.
Looking at the 2 x 7341's it appears that the TCP preposition flows never reach above 24 per 7341 at any one time.
Is 24 a maximum number of pp flows ? If not, any idea why this number may be so low as I have asked the PP job on the CM to PP to approx 100 sites concurrently ?
We are running 4.3.3 s/w.
7341 (a)
Current Active Optimized Flows:1097
   Current Active Optimized TCP Plus Flows:1060
   Current Active Optimized TCP Only Flows:13
   Current Active Optimized TCP Preposition Flows:24
7341 (b)
Current Active Optimized Flows:1012
   Current Active Optimized TCP Plus Flows:979
   Current Active Optimized TCP Only Flows:5
   Current Active Optimized TCP Preposition Flows:24
thanks
Anthony

Hi Anthony,
Only 24 downstream Cisco WAAS devices at a time can actively receive prepositioned files from a single core Cisco WAE. Additional Cisco WAAS devices assigned to a prepositioning job must wait for the completion of one of those processes. This delay must be taken into account when sizing a Cisco WAAS deployment for CIFS prepositioning.
Given a maximum of 24 prepositioning task processes per core Cisco WAAS device, specifying more than 24 destination sites can significantly extend the time required to complete a prepositioning job. Verify that all files in the prepositioned directory are actually needed at all sites. If they are not, construct multiple prepositioning jobs segregating the sites to receive only those files required. If all files are needed at more than 24 sites, divide the prepositioning job into multiple prepositioning tasks that start at different times
Regards
Kiran.

Similar Messages

  • How to detect what keyboard is currently active on desktop?

    Hi there, I'm working on a virtual keyboard (window with buttons as keys) for my swing application. When I show keyobard window I would like to adjust the layout of my virtual keyboard to system keyboard that is currently active on desktop. But I don't know how to detect what keyboard is currently active. How to detect this? Thank you.

    I answered my own question - see
    http://forums.ni.com/t5/LabVIEW/Loading-and-Running-a-VI-on-a-cRIO-from-a-PC/td-p/796657
    On the Real-Time CompactRIO Properties > VI Server, you must check the box for TCP/IP protocol, which by default is unchecked.
    Also, when you make a Build Specification for a VI and set it to run on startup, you can still enter the VI name (not c:\ni-rt\startup\startup.rtexe) as the VI Path on the Open VI Reference.

  • Current Activity Name

    Hi,
    How can i get the current method activity name in the same method.
    I am navigating from the fragment to method activity in the task flow. after controle moves to the method activity i need to get the name of the method activity inside the java method which i mapped for the same.
    Brahma

    Hi,
    I am having a Task flow contains Three activities and included that as a region in the jspx file called index.jspx
    1. method Activity - Activity Type: Method Call- (Default activity) - name - initActivity
    2. Fragment Activity - Activity Type : View - name - startpage
    3. Method Activity - Activity Type : Method call - name - secondmethod
    After running the index.jspx file first controle will come to the default activty and then goes to the Fragment Activity called startpage. if i click one button inside the fragment means then controle moved to the secondmethod activity. inside that i need to find the name of that activity like secondmethod. if we copy and past the same code in default activity means i need to get the initActivity.
    Brahma
    Edited by: BRM on Feb 22, 2012 10:50 AM

  • How can I get that which one is currently activated window

    I created a frame. The user may be minimize that frame and he may use some other window like internet explorer or Notepad or something else. Then I want to know that which window is the currently activated window. Is it possible. Please help me.

    you can use Javascript functions/varibles.
    In any page you can insert a special form like this:
    <form name="myNameWindow">
    <input type="hidden" name="myName" value="Ivan_pag01">
    </form>
    and in the other reading that value.
    Obviusly you have to save a reference in a variable of the other window.
    This is possible only if:
    1) other page is in the same browser window but in an other frame
    2) you have generated the other page via an "window.open" function (or your page is generated from it via that function)
    -- Ivan

  • How to get the number of current active external modes?

    hi all,
    I need to get the number of currently active external modes. This can be done by calling function THUSRINFO. But this only works propperly, if you are logged on only once. If you are logged on more than one time then the function returns several entries in the parameter USR_TABLE. The entries mainly differ in the first parameter TID (type UTID, INT4) "terminal-identification" but how can I know which is the valid one for my current session. Functions TERMINAL_ID_GET, SPH_TERMINAL_IDENTIFY and SPH_TERMINAL_ID_GET dont work.
    Or is there another way to get the number of active external sessions?
    Thanks in advance,
    Michael

    Hi,
    tables: usr02, usr41.
    data: OPCODE_MODE_COUNT(1) TYPE X VALUE 3,
          modes like sy-index,
          u_MODES LIKE MODES.
    select * from usr02.
      select * from usr41 where BNAME = usr02-bname.
        CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE_MODE_COUNT
          ID 'TID' FIELD usr41-TERMID
          ID 'MODES' FIELD MODES.
        IF SY-SUBRC = 0.
          u_MODES = u_MODES + MODES.
        ENDIF.
      endselect.
      if sy-subrc = 0.
        write:/ usr02-bname, u_MODES.
      endif.
      clear u_modes.
    endselect.

  • No externally managed transaction is currently active for this thread

    Got the following exception after updating an entity bean and call persist method. Code the given below the exception.
    Exception [TOPLINK-23010] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.TransactionException
    Exception Description: No externally managed transaction is currently active for this thread
    public Object persistEntity(Object entity) {
    em.flush();
    em.persist(entity);
    return entity;
    private void modifyUser (Iuser user, String newHandle, Hashtable userDetails) throws UnknownException, WarningException {
    if (user == null) {
    throw new WarningException (new CatalogHelper("ITOOLS_000015", "to modify a user"));
    boolean handleUpdate = false;
    if ((newHandle != null) && !newHandle.equals("^\\s*$")) {
    handleUpdate = true;
    String oldHandle = user.getUserhandle();
    if (handleUpdate && oldHandle.equalsIgnoreCase(newHandle)) {
    handleUpdate = false;
    if (!handleUpdate && (userDetails == null) || (userDetails.size() == 0)) {
    return;
    if (handleUpdate) {
    userDetails.put("userhandle", newHandle);
    IToolsUtil.validateInputData("iuser", userDetails, false);
    if (handleUpdate) {
    userDetails.remove("userhandle");
    System.out.println("handleUpdate " + handleUpdate);
    // For User admin, handle, isactive, isadmin cannot be changed.
    if (oldHandle.equals("admin")) {
    if (handleUpdate) {
    throw new WarningException (new CatalogHelper("ITOOLS_000045", "Handle"));
    String active = (String)userDetails.get("isactive");
    if ((active != null) && !active.equals("Yes")) {
    throw new WarningException (new CatalogHelper("ITOOLS_000045", "Is Active"));
    String admin = (String)userDetails.get("isadmin");
    if ((admin != null) && !admin.equals("Yes")) {
    throw new WarningException (new CatalogHelper("ITOOLS_000045", "Is Admin"));
    System.out.println("user transaction started");
    if (handleUpdate) {
    FinderMethods fm = new FinderMethods();
    try {
    fm.findByUserHandle(em, newHandle);
    throw new WarningException (new CatalogHelper("ITOOLS_000043", newHandle));
    } catch (ObjectNotFoundException onfe) {
    user.setUserhandle(newHandle);
    System.out.println("User handle modified");
    } catch (SQLException se) {
    se.printStackTrace();
    throw new UnknownException (new CatalogHelper("ITOOLS_100000", new Object[]{"modifyUser", se.getMessage()}));
    String lname = (String)userDetails.get("userlname");
    if (lname != null) {
    user.setUserlname(lname);
    String fname = (String)userDetails.get("userfname");
    if (fname != null) {
    user.setUserfname(fname);
    String email = (String)userDetails.get("useremail");
    if (email != null) {
    user.setUseremail(email);
    String passwd = (String)userDetails.get("userpasswd");
    if (passwd != null) {
    user.setUserpasswd(passwd);
    String active = (String)userDetails.get("isactive");
    if (active != null) {
    user.setIsactive(active);
    String admin = (String)userDetails.get("isadmin");
    if (admin != null) {
    user.setIsactive(admin);
    System.out.println("details are updated");
    persistEntity(user);
    System.out.println("committed");
    How to resolve this issue? I am using Jdeveloper 10.1.3.0.4 (SU4)
    regds
    -raju

    The stack trace is given below. This exception is occured at "em.flush()" method. I even tried removing em.flush() method. Even then I got the same exception.
    I tried a different way of overcome this problem. Used UserTransaction instance say "ut" before create / modify the entity bean and later comitted. In that case I am not getting any exceptions. However, commit is happening only when new instance is created, commit works, but modification of an existing instance, commit is not working. Looks like there is some serious problem with EJB 3.0 in OC4J. Basic functionality is not working.
    Stack trace when flush method is called:
    Local Exception Stack:
    Exception [TOPLINK-23010] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.TransactionException
    Exception Description: No externally managed transaction is currently active for this thread
         at oracle.toplink.exceptions.TransactionException.externalTransactionNotActive(TransactionException.java:98)
         at oracle.toplink.internal.ejb.cmp3.transaction.base.JTATransactionWrapper.checkForTransaction(JTATransactionWrapper.java:39)
         at oracle.toplink.internal.ejb.cmp3.base.EntityManagerImpl.checkForTransaction(EntityManagerImpl.java:322)
         at oracle.toplink.internal.ejb.cmp3.base.EntityManagerImpl.getActiveUnitOfWork(EntityManagerImpl.java:314)
         at oracle.toplink.internal.ejb.cmp3.base.EntityManagerImpl.flush(EntityManagerImpl.java:164)
         at com.itools.vs.model.session.AdminSessionBean.persistEntity(AdminSessionBean.java:57)
         at com.itools.vs.model.session.AdminSessionBean.createUser(AdminSessionBean.java:124)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Stack trace when persist method is called:
    Local Exception Stack:
    Exception [TOPLINK-23010] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.TransactionException
    Exception Description: No externally managed transaction is currently active for this thread
         at oracle.toplink.exceptions.TransactionException.externalTransactionNotActive(TransactionException.java:98)
         at oracle.toplink.internal.ejb.cmp3.transaction.base.JTATransactionWrapper.checkForTransaction(JTATransactionWrapper.java:39)
         at oracle.toplink.internal.ejb.cmp3.base.EntityManagerImpl.checkForTransaction(EntityManagerImpl.java:322)
         at oracle.toplink.internal.ejb.cmp3.base.EntityManagerImpl.getActiveUnitOfWork(EntityManagerImpl.java:314)
         at oracle.toplink.internal.ejb.cmp3.base.EntityManagerImpl.persist(EntityManagerImpl.java:74)
         at com.itools.vs.model.session.AdminSessionBean.persistEntity(AdminSessionBean.java:57)
         at com.itools.vs.model.session.AdminSessionBean.createUser(AdminSessionBean.java:123)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)

  • How to determine which CDockablePane in a group is currently active in Visual Studio 2013

    I understand that to activate a pane, I can do the following:
    dockablePane->ShowPane(TRUE, FALSE, TRUE);
    But, in a group of panes, how can I tell which pane is currently active?
    For instance, let's say there are 3 groups of panes on the screen.  The first group contains three tabs captioned "A", "B", and "C".  The second group contains "D", "E", and "F" and the
    third group contains "G", "H", and "I".
    How would I determine the active pane within each group?  (As an example for reference, within Visual Studio in the left pane group, I can currently see the contents of "Solution Explorer" while "Class View", "Property M...",
    "Resource Vi..." and "Team Explo..." are within the same group but not active.  In the bottom group, I can see the contents of "Output" while "Find Results 1" and "Find Results 2" are present but not active".  
    In the right group, I can see "MySource.cpp" while "MySource.h" is present but not active.  So, I need to know how to request from each pane whether they are the current tab within their container or not.
    Steve

    Hi Steve,
    Thanks for posting in MSDN forum.
    (As an example for reference, within Visual Studio in the left pane group, I can currently see the contents of "Solution Explorer" while "Class View", "Property M...", "Resource Vi..." and "Team Explo..."
    are within the same group but not active. In the bottom group, I can see the contents of "Output" while "Find Results 1" and "Find Results 2" are present but not active". In the right group, I can see "MySource.cpp"
    while "MySource.h" is present but not active. So, I need to know how to request from each pane whether they are the current tab within their container or not.
    This scenerio in your example, we don't need to know the current tab within which tab group. Actually I don't understand why do you need to know that? If you are using
    AFX_DOCK_TYPE::DT_SMART   model dock pane, the dock pane should be implemented in a internal MFC
    CSmartDockingManager
    class and it is not intended to be used directly from your code. . You could read the source code of this class at VS installed path-> VC->altmfc->src->mfc->afxsmartdockingmanage.cpp
    For the dock pane layout in VS interface, I remember there is a sample named Visual Studio Demo sample in Visual C++ 2008 Feature Pack. You can download it at here.
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/b4e6cb6e-e2a8-4e02-9c67-0dc431618157/visual-c-2008-feature-pack-samples-where-to-find?forum=vcgeneral
    And the dock pane control implements the core functionality that controls docking layout in a main frame window by CDockingManager class.
    https://msdn.microsoft.com/en-us/library/bb983791.aspx
    A greate article about using CDockablePane:
    http://www.codeproject.com/Articles/493218/Understanding-CDockablePane
    Please tell us more details about what you want to do.
    Best regards,
    Shu Hu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The tag name: "embed" Not found in currently active versions.[XHTML 1.0 transitional]

    Hello I have this message "The tag name: "embed" Not found in
    currently active versions.[XHTML 1.0 transitional]" appear when I
    validate one of my pages in my site, the page contains a flash
    picture/animation. Please can anyone explain how I can correct this
    error?
    The tag name: "embed" Not found in currently active
    versions.[XHTML 1.0 transitional] this is in relation to:
    "<embed src="Map.swf" quality="high" pluginspage="
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
    type="application/x-shockwave-flash" width="536"
    height="437"></embed>"
    Any help would be appreciated.
    Thanks Steve

    > how I can correct this error?
    You don't. You ignore it. The <embed> tag is not valid
    HTML, but it is
    required to have reliable rendering of your Flash across
    various browsers.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Steve@FHS" <[email protected]> wrote in
    message
    news:fcm6ss$kvs$[email protected]..
    > Hello I have this message "The tag name: "embed" Not
    found in currently
    > active
    > versions.[XHTML 1.0 transitional]" appear when I
    validate one of my pages
    > in my
    > site, the page contains a flash picture/animation.
    Please can anyone
    > explain
    > how I can correct this error?
    >
    > The tag name: "embed" Not found in currently active
    versions.[XHTML 1.0
    > transitional] this is in relation to:
    >
    > "<embed src="Map.swf" quality="high"
    > pluginspage="
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
    > n=ShockwaveFlash" type="application/x-shockwave-flash"
    width="536"
    > height="437"></embed>"
    >
    > Any help would be appreciated.
    >
    > Thanks Steve
    >
    >

  • Write-protect mode is currently active. The editor is now in read-only mode

    How do i get the portal out of write protect mode.   No matter what i change to do, i get the message
    Write-protect mode is currently active. The editor is now in read-only mode.
    this shows up in the log
    10/06/10 16:21:21 -  ERROR: Not deployed. Deploy Service returned ERROR:
                         java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.bi.tct.BI_Administration..
                         Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during
    deploy: Import aborted - write protect mode is active.

    Hi David,
    Do the following steps:
           1.       Start the Visual Administrator .
           2.       Choose Global Configuration   u2192Server  u2192Services u2192com.sap.portal.pcd.gl .
    The properties of the service are displayed:
                                a.      Pcd.Pl.WriteProtectActivated defines whether or not write-protect mode is activated. By default it is set to false .
                                b.      Pcd.Pl.WriteProtectCause  describes the reason that write-protect mode is activated. This information appears in the log files.
           3.       Deactivate write-protect mode by entering false  as the value for Pcd.Pl.WriteProtectActivated .
           4.      C lick Update and then click Save .
    A confirmation dialog box opens.
           5.       To apply the changes to all cluster elements, click Yes .
           6.       To reset the default values, click the Reset Default Global Properties icon .
    This will deactivate the write protect mode.
    Thanks and Regards,
    Syam.

  • Suggestions to find the current active fields in debugging mode

    Hi All,
    I need to validate a particular entry in the screen in a particular subroutine(inside a user exit). I know the field gets populated but do not know which field is that, is there a way to know the current active fields in the debugging mode.
    Regards,
    Karthik

    Hi,
      You can create dynamic types and data for those types are run time.
      lets assume that you have structure of some type and you have work area of that type.
    DATA: lv_data type SPFLI.
    DATA: lr_rtti_struc TYPE REF TO cl_abap_structdescr.
    DATA: lt_comp       TYPE cl_abap_structdescr=>component_table.
    DATA: ls_comp       LIKE LINE OF lt_comp.
    DATA: lr_data       TYPE REF TO data.
    FIELD-SYMBOLS: <fs_data> TYPE ANY.
        lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( lv_data ).
        lt_comp = lr_rtti_struc->get_components( ).
    "Now  lets remove two fileds from the table as follows.
    LOOP AT lt_comp into ls_comp.
    DELETE lt_comp INDEX sy-tabix.
    IF sy-tabix = 2.
    EXIT. " Delete two components of the structure now lt_comp as two components less from SPFLI
    ENDIF.
    ENDLOOP.
        CALL METHOD cl_abap_structdescr=>create
          EXPORTING
            p_components = lt_comp
            p_strict     = abap_false
          RECEIVING
            p_result     = lr_rtti_struc.
    CREATE DATA lr_data TYPE HANDLE lr_rtti_struc. "Now you have data of the new type
        ASSIGN lr_data->* TO <fs_data>.
        CREATE DATA lr_table LIKE STANDARD TABLE OF <fs_data>.
        ASSIGN lr_table->* TO <fs_table>.
    Regards,
    Sesh

  • Which table stores SM04 (currently active users) data?

    HI all,
    what is the table which stores the SM04 currently active users data in sap?
    plzzzzzzzzz help me..
    Thanks all in advance ,
    Malti

    SM04 uses a kernel call to get the active user data, not table is involved:
    Get the list of logged on users
        CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
            ID 'TAB' FIELD USR_TABL-SYS.
    Markus

  • What is the table which stores the SM04 currently active users data

    HI all,
    what is the table which stores the SM04 currently active users data in sap?
    plzzzzzzzzz help me..
    Thanks  all in advance ,
    Malti

    Hi,
    Pl. check in tables USR02/USR01 for the list of users & logon data.
    Regards,
    SDS

  • How to keep track of which tab is currently active in the page using Session object?

    Hi,
    Just curious as to whether it is possible to have a PL/SQL event fire on an active tab.
    The reason is I want to keep track of which tab is currently active on the page is that I have "generic" forms and reports published as portlets that I wish to be able to determine from the session object what page/tab the user is coming from and apply certain restrictions etc.
    kind regards,
    Matt.
    null

    Hi Konstantina,
    Yes You can do like that 2012-->q1-->January
    Steps:
    1. Create time dimension hierarchy as by following like Total--> year--> Quarter--> Month--> if you need you can keep Description.
    2. Drag the Year column from period dimension table to the dimension hierarchy of year.
    3. Drag the quarter column from period dimension table to the dimension hierarchy of Quarter.
    4. Drag the month column from period dimension table to the dimension hierarchy of month.
    5. Drag the hierarchy to period dimension table in presentation layer.
    In Answer side keep as it as Default: drill in primary and secondary interaction under column properties.
    For more refer : http://mkashu.blogspot.com
    Regards
    VG

  • "cfajaximport" Not found in currently active versions

    Dear all
    First I want to say I am very begginning.
    My problem is when I want to use some RIA sample appliaction
    (from adobe site) which is using some AJAX feature I have unknown
    runtime error during data saving. I have information that "The tag
    name: "cfajaximport" Not found in currently active versions. " What
    is it mean and how to resolve it?
    I have ColdFusion 8.0.1 (developer edition), IE6.0
    Thank you in advance for help

    I was about to type up a long answer on the fist thing to
    check, and I
    found this blog that does it all for me.
    http://www.coldfusionguy.com/ColdFusion/blog/index.cfm/2007/11/13/CF8-AJAX-Features-CFIDES cripts-and-CFAjaxImport
    To summarize, you need to make sure the CFIDE/scripts/ folder
    is
    properly accessible. You should be able to type the following
    URL into
    a browser, unless you have your site configured in a
    non-default manner.
    http://yourDomain/CFIDE/Scripts/cfform.js
    I.E.
    http://localhost/cfide/scripts/cfform.js
    on *my* development server.
    If that does not return a file, then none of the built in
    ColdFusion
    form or AJAX functionality is going to work.

  • How to get current active tab (Detailitem)

    Hello,
    i have searched everywhere and still can't find a solution for such simple task. I want to get the current active Detailitem value (af:showDetailitem) from a panelTabbed (using java class)
    Working on Jdeveloper 11.1.2.4.0,
    can you help me please?

    Was hoping something more abstract solution, like getting the current instances of active tabs and find out what is the active at that running moment. Ah well, its 2013 and still disappointed by Java.
    Thanks a lot for your help Subramanina, i used something similar to your suggestion:
    1) i have change my main function, and set it to accept a string (that will be the tab's id) for my purpose
    2) on each tab, i add a disclosure event function. Inside that, i just simply save the tab's id on a private variable. So when ever
    i want the current active tab id, i just get that variable's value.
    3) PartialTrigger the panel with tabs
    Almost the same solution with yours, just mine is less professional since i lost you there

Maybe you are looking for