Cursor doesn't focus to the newly created row.
I am using JDeveloper 11.1.1.4 . Whenever I create a new row in adf table, the cursor doesn't focus to the new row.It always focuses to the last row which clicked before adding the new row.
As Timo said, it would depend on how you create new row.
Usually this is how, I would do :
http://adfbugs.blogspot.com/2010/04/inserting-new-rows-as-last-row-of-table.html
Similar Messages
-
ADF JS API methods not working for the newly created rows in table
Hi All,
We need to make sure the focus goes back to the newly created rows first column's first component.
Used findComponent and findComponentByAbsoulteId and even hard coded the id, but still the methods are returning null.
Even tried ADFRichTable.getRowKey(index), by passing index as 0 for the first row, still the method is returning null.
Tried ADFUITable.findComponent(Object scopedId, Object rowKey), but unable to pass client side rowKey as the above method is returning null.
All our requirement is to make the focus back to the first row's component when the user clicks on the cancel button instead of save button. Appreciate your help. Thanks.
P.S.: Rows will be created using CreateInsert method.
JDEV Version: 11.1.2.0.0 and Table is in a region and we are using UI Shell Tab Template to launch regions.
Raja.
Edited by: RajaRamasamy on Feb 10, 2013 4:30 PM
Edited by: RajaRamasamy on Feb 10, 2013 4:30 PMThanks Frank,
But some times even we use findComponentByAbsoulteLocator, its not working. So i followed the approach where you will get the rowID like the below and construct the client ID and pushing the JS to client using Service class. And it worked.
String rowId = table.getClientRowKeyManager().getClientRowKey(facesContext, table, rowKey);
But i am worried that even though we hard coded the client and executing the js function from the command button by keeping client listener's type as click, the focus is not setting. And i tried giving the id as tableId[rowIndex]:componentId in the findComponentByAbsoulteLocator.
Can you let me know is there another way to make focus only using JS on click of command button, where the button does not have any action or actionListener.
Raja. -
The newly created row cannot be found with another view
I'm building a JSP client based on BC.
I have 2 views based on the single entity.
I'm creating a new row with one view and want to edit the corresponding row with the other view without intermediate commit.
However, the last view cannot find the new row.
For the purpose I get the newly created row's key and trying to find the row at the other view by it's RowKey with the tag <jbo:Row>. Now I have an exception:
oracle.jbo.JboException: Row was not found using request parameter ...
Can someone give an advice, please?Hi,
I was a little uncertain. I do not have any view associations in this case.
I've tried to use " .setAssociationConsistent(true)" - dosen't help.
I've just changed the standard wizard-generated Browse-Edit UIX/JSP form in such way that I'm using one VO for the browse-table jsp, and some other VO for editing jsp. The editing jsp is by itself divided into a number of tabs.
Every tab of the editing jsp is based on a specific VO and all of the VOs are based on the single Entity Object to the one table.
While I am editing the existing records in the table everything goes right, but if I create a new row via the browse page and then try to edit it, I have the exception:
" Row was not found using request parameter: .... " This thread is continued in another post
Re: ORA-03113 end of file on communication channel error
There is a bug with hanlding of viewlink-consistency and DBsequence in Jdev 9.0.2 that leads to this issue as discussed in the other thread. -
Setting focus to inputText of newly created row in af:table
Using Jdev Ps4
Simple use case:
I have an af:table with a few columns and a createInsert button.
When I press the createInsert button, a new record is added to the table.
How can I set focus to the first inputText of that newly created row?
I have been looking for a solution online but all the examples online tell us how to set focus to components that already exist and you know the ID of. With the newly created row, you don't have the ID so you cannot set the focus.
In this topic (which is quite old...) https://kr.forums.oracle.com/forums/thread.jspa?threadID=643924 Frank Nimphius explained that it would be difficult and he would pass it on to the developers.
I haven't found any information if there are some enhancements in this area to make this work...
I tried with using plain old javascript by looping through the dom structure but had no success in doing so...
Thanks
Yannick
Edited by: Yannick Ongena on Apr 2, 2012 8:38 AMYannick,
can you check this?
how to get focus on newly created row in table?
~Abhijit -
ADF 10.1.3.4: 'losing' newly created row in master-detail-detail.
Situation:
I have a page in JSF/ADF with the following set up.
Top-half of the page is a table.
Underneath the table is on the left a selectonelistbox component and next to it on the right a tabbed section.
The table -> selectonelistbox relation is master-detail.
The selectonelistbox -> tabbed section is master-detail.
So when you change the selection in de seletonelistbox the data in the tabbed section changes.
One of the functions in a tabbed section is a createinsert.
step1: select value '1' in the selectonelistbox.
step1: a new row is create (with createinsert). there is no commit yet, the row is in the entity cache.
step2: change the selection to '2' in the selectonelistbox.
step3: create a new row (with createinsert).
step4: commit the changes.
We see that only the row of the current row is committed. The newly created row under value '1' has disappeared.
There are no warnings/exception thrown.
How can I commit all newly created rows?
It must be possible to created several new rows, before committing if it is possible.
Some specs:
JDeveloper 10.1.3.4.0
using the embedded OC4J server
JDK
Thanks,
GoldhornWhich technology are you using?
-
How to assign project specific task with the newly created projects ?
Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option
-
I just upgraded to Firefox 4. Now my cursor doesn't "snap-to" the default position.
I just upgraded to Firefox 4. Now my cursor doesn't "snap-to" the default button. I made sure it was newly recognized (by unchecking and rechecking) in
Control Panel > Mouse > Pointer Options > Snap To: Automatically move pointer to a default button in a dialog box > Apply > OK
But the Fox isn't cooperating. How do I get this working again?I'm afraid I don't understand how your reply relates to my problem. I'll type the words I don't understand in your answer:
"default dialog button" (where do you find this?)
"mouse middle-click button" (I have a wheel)
"Global default" I don't know what that is, so, apparently, it doesn't apply to me.
"IntelliMouse" I don't have this either, just an old, dumb "Dell mouse" ;-)
"dialog box" is that what I'm hoping the cursor will be moved to? If so, how do I get it to move there on it's own? What's the purpose of "Snap to" if I have to move the cursor there myself? -
When Aperture creates a new version from a RAW file, no new master file is created. This makes total sense and I understand why.
When I edit a photo in an external editor (Photoshop CS6) from within Aperture, Aperture creates a Tiff file to edit in Photoshop and saves it along with the RAW original once I have finished editing it in Photoshop. I understand why this is necessary too. So far so good.
But if I then ask Aperture to create a new version from the newly created image edited via Photoshop, it creates another new Tiff. I can't see why this is necessary. Aperture should be able to apply further new Aperture edits to the newly created Tiff in the same way that it creates new versions from a RAW file without duplicating the master - by remembering any new 'recipe' changes applied to the Tiff. It only needs to remember the edits made as the Tiff already now exists.
Can I stop it creating repeat Tiff files each time I create a new version from the Photoshoped photos?
Thanks in anticipation.Hello Kirby,
I clicked on the 'Show in Finder' and it revealed a new file called IMG_0961 (1) which goes with the original IMG_0961.CR2 and the edited new tiff created for Photoshop which was called IMG_0961.tiff
I noticed also that a separate version I had previously created using Canon's DPP stand alone software and titled by me IMG_0961 (DPP).TIF (same thing but from a different original) does not form a new master file when I create a new version of that one. I've tried this with a few images but when the original is edited in Photoshop via Aperture a second version of the Tiff is created for the 1st version of the image when I create a new version fo it. -
How to read value from Key flexfield added on to the newly created SIT
Hi Experts,
I have a requirrment to display a new structure in the Special Information Types (SIT) screen in SSHR. The data entered into the segment needs to be validated using PL/SQL function.
I have performed below steps to display the structure/field on SIT Page
1. Created new flexfield structure as XX_LEAVE_ENCASHMENT under the "HUMAN RESOURCE" Application (Application id- 800) and flexfield TITLE "Personal Analysis Flexfield" (PEA).
2. Added a new segment "Encash Days" for the newly created flexfiled structure "XX_LEAVE_ENCASHMENT".
3. Added this new structure in the Special Information Types form in HRMS responsibility
4. The structure is enabled on the SIT screen.
Now I want to validate the data entered in Encash Days field in this page by calling a PL/SQL function. This can be done by extending the SIT page Controller.
But how should the ID of the newly enabled segment (in the new Flexfield strucuture) be retrieved in the controller inorder to read the user-entered value (to further call the validation program)? Or is there any other way of achieving this functionality in OAF?
Please help.
Thanks.Hi,
Yes, u can get the value from the SIT and perform the relevant validation too.
Refer http://apps2fusion.com/at/43-ss/453-oaf-extension-case-study
Regards,
Gyan -
Function module to the newly created 'Z' function group
I am facing a strange issue when I am trying to reassign the existing 'Z' Function module to the newly created 'Z' function group. The system gives an error as 'Modified Function Modules may not be reassigned'.
Could anyone face this issue before or if you have any suggestion on this, please let me know.
Thanks in Advance.Hi,
Check this steps:
1) The FM to be moved is activated.
2) Both new Z-FG and the previous FG are activated.
3) You are not editing the the FM you are trying to move.
4) If you are in the Object List view (se80 view) goto : Utilities->Update Navigation Index
Guess that should take care of the issue!!
Cheers,
Lakshmiraj
Reward if useful -
How to get the Newly Created Material
Hi all,
Iam creating Materials using BDC sessions method,My Problem is to update the Newly Created Material in a Ztable.
so iam getting the Newly created Matnr by the following peice of code
SELECT matnr FROM mara INTO TABLE v_matnr
WHERE ersda = sy-datum
ORDER BY matnr DESCENDING.
But the thing is,we are getting Previously created material.i.e the new material will be created only after the sessions are processed,but when i write the above code in the program we are getting previous material.
so how to update the newly created material.
I think we can't do that through program because we can get new material only after processing the session..so what is the solution for this.should we use userexits for getting the newly created material.
thanks in advance
balajiHello,
Use the <b>BAPI_MATERIAL_SAVEDATA</b> to create the materials.
The BAPI will return the Material number which is created at that instance by which u can update the ZTABLE.
Vasanth -
RSRV not showing number of record for the newly created cubes
In RSRV Elementary tests i execute database information for a newly created cube.It is executed fine and it is showing the no of dimensions and line item dimensions but it is not showing the diff tables E,F.... I tried refreshing the statistics of this cube in the manage and did check statistics aswell.But it is still the same.and I tried in the program SAP_INFOCUBE_DESIGNS it is showing for all the cubes except for the newly created once.
Is there any settings as such.
Let me know ASAPHi Ninad,
Use the program SAP_INFOCUBE_DESIGNS and get the cube size in bytes.
Transaction se16 -> fact table name, /bic/f[infocube name] and /bic/e[infocube name] or /bi0/f.. and /bi0/e for business content infocube, click 'number of entries' - This is for no. of records.
Transaction DB02 -> 'detail analysis' -> object name = [infocube name]
Function Module - RSDU_INFOCUBE_TABLE_SIZES_INF
Bye
Dinesh -
If I change my apple id (using edit in my account) will it allow my prior purchases to be accessed/updated under the newly created id?
Yes, it should work. They are still purchases under that account.
-
Accessing the newly created document number
Hi,
I was able to create an invoice successfully.
I am using the ICOMPANY object to capture the newly created document number as comp.getnewobjectkey().
But the number i get is different from what is created in the system.
For example. i receive the number as 28590 from method comp.getnewobjectkey() but the actual invoice number in the system is 28587.
Any ideas on why this is happening?
Thanks
RamakanthHi Ramakanth,
GetNewObjectKey will return you the DocEntry value not the Docnumber.
If you need the docnumber, run a query. "SELECT DocNum FROM OINV WHERE DocEntry = 28590
Regards
Edy -
Retain newly created rows after page navigation.
Hello,
I have designed two pages. On First page I have to create multiple rows and to assign some values I need to open another page.
The problem is once we create new rows on view object and if we redirect to any other page its view object is automatically executed and newly created rows will not be retained.!
I have tested redirection using both methods with retain AM to True, but its not working.
pageContext.forwardImmediately("page",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, null, true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO);
pageContext.setForwardURL("page",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, null, true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
Please suggest something....
Thanks,
SwatiHi Krithika, Thanks for replying...
Krithika wrote:
If you want to create new row in table and commit to the db, please find this sample:
http://andrejusb.blogspot.com/2009/11/crud-operations-in-oracle-adf-11g-table.html
This is done automatically when user clicks on commit button on ADF create form, rows gets commited in database.
I just need to display these newly created rows on ADF table on the same page below commit button.
Can you give more details about your usecase..?
What happens when the same user comes back after closing the session? Do you want still show the blank page/table with out any previous data created by the same user..? If yes, what happens to the previously stored data..?
Basically, give a brief note on what you are trying to achieve..?
When user comes back to this page after closing this session, it will not show any rows in the ADF table.
user will enter new values to create new rows and this time again on click of commit button the newly row created for this session should be shown.
The previously created rows are already commited to database table
Hope I am able to explain the requirement. Please let me know for any questions on requirement
Regards,
Tanveer
Maybe you are looking for
-
hello the problem in my code is that i defined actionlistener for a button but it does not do what it should do . it throws an error in the console and i think my code is 100% correct what is the problem please help me this is the codewith import jav
-
ZXPADU02 - How To Stop It From Being Triggered in a BDC Session
I have an edit in ZXPADU02 that says if you are trying to change IT0167 you will get a POPUP Message telling you we don't want you doing that. My problem is that I am using PA30 in a BDC session in another program to update IT167 and it is causing
-
E2500 - Needs to be Power Cycled Once or Twice a Day.
Brand new E2500, needs to be power-cycled once or twice a day. Already reinstalled Cisco Connect and updated the Firmware. Having some problems with my brand new router and customer service is being of VERY LITTLE help! What should I do?
-
I just upgraded to iTunes 7 yesterday when I installed my replacement iPod. Yesterday it was working fine, but today I could not reopen iTunes. I have not backed up the last 2 or 3 cds I bought and I am finding it difficult to back them up without ga
-
Do I need to buy the Enterprise Suite or just Forms module?
Hello, My company needs to use the funcionalities that Forms module gives, so we are planning to purchase it. But I'm not sure if it's possible to use its functionalities just having this module, or if we need to buy the Enterprise Suite because it i