Custom development for release in DBM to approve in workflow
hi everyone,
In Dealer Business Management, there is requirement for approvals in Sales Order, Service Order based on discount value.
For particular discount value particular person has to approve.
But there is no such release as in PR and PO for Sales Order and Service order in SAP DBM.
we have to add options for release in it and have to develop custom rule.
how can it be possible?
Hi,
You will be using user decision step for your approval and rejection process. 'User Decision' step has more than one outcome branches.
In your case keep one branch will be for approval and another will be for rejection. So you will add an activity in the approval branch where MIGO will take place. This flow through this branch will only happen at the time you choose APPROVE. When you choose REJECT the flow will take the other branch which doesnot have the activity 'MIGO'. Hence MIGO will not take place in case of Rjection.
Hope I was able to explain you.
Regards
Anik
Edited by: ANIK SIRCAR on Sep 12, 2011 2:12 PM
Similar Messages
-
Problem with custom development for documents in Record Management
In Record Management i have setup a record model. It contains Bor objects, documents, cases and so on.
Each kind of record managent object has it own requirements.
For the documents there is a requirement which demands that if the scandate is changed also the date till which the document must be helded in the system must be changed.
This cannot be done automatically via default SAP and i don't want to let the customers do it there selfs, to much risk they make errors, so this must be done via custom development.
The logic searches in a enhanced method for the right attributes from the importing list of available attributes of the particular document.
This is going well in the development system but when i transport it to the test system it fails. I have noticed that the content of a custom developed field ( for example ZSCANDATE) is loaded well but a default field like SRM_DOM_STORAGE_START not. The systems returns an error that the description of the attribute is missing. When i look in the DMWB ( DocuMent WorkBench ) i dont see errors, but afcorse there is one.
What can i have forgotten in my record management installation?
Offcorse the test system is a copy of a working development system, but you have also some things that are system dependent. and i think i have forgotten some of those..
If you have a idea let me know!
kind regards,
Anton Pierhagen.Hi BalusC,
thanks for the quick answer. I tried it as you said and now I get a validation error in my h:messages tag on my jsf page after submitting the form. There are no errors in my JBoss console, just this one word on my jsf page. Do you have any idea what this could mean?
My two lists look like this:
private ArrayList<GroupBean> selectedItems = new ArrayList<GroupBean>();
private ArrayList<SelectItem> allGroups = new ArrayList<SelectItem>();The allGroups list gets filled like this:
for (GroupBean group: groups){
allGroups.add(new SelectItem(group, group.getName()));
}where groups is a simple collection of GroupBeans which I read from the database. This seems to be correct; at least my list of checkboxes shows the correct group names.
Now here is my selectManyCheckbox:
<t:selectManyCheckbox id="sensor_access" value="#{sensorBacker.selectedItems}" layout="pageDirection" layoutWidth="3">
<f:selectItems value="#{sensorBacker.allGroups}"/>
</t:selectManyCheckbox>Any idea what goes wrong here?
Thanks for your help!
Wiebke -
Hi,
Is it possible to develop custom driver and use with UDS to get data from non-standard data source?
If possible, is there a blog about it?
Thanks.Cemil,
For your RS-232 output, in this case you reference a scale, there are some good hardware solutions (Digi One SP Serial to Ethernet converters) This will allow you to port your scale data over Ethernet to your server. Now, for processing your scale data, there are various OPC drivers out there (U-CON for example from Kepware) I mention UCON because it has prebuilt protocols for parsing scale data. From here you can configure your scale output as an OPC topic. You can configure your OPC server to keep the old value resident, until a new value comes in. In this case, with a scale it would update asynchronously when your scale pushes out a new value. (I just did an application like this)
Now if youu2019re going with MII 12.1 and Pco great, then you can do event driven transfers. But if youu2019re like the majority of us, using 12.0 or lower. Then your best bet is to store the value in some intermediate area such as a relational database, then schedule a transaction to forward it to SAP. This way you have a store and forward capability. If you don't have a process historian, there are also several commercially available OPC to RDBS tools out there (Software toolbox makes one called OPC to ODBC) There are also others out there as well. -
Custom development for Address details screen
Hi Experts,
In the ESS screen, we have to provide one link for every employee. When the user will click on the link, one letter in PDF format should be displayed to the user. This PDF will act as a "Address Certificate". The address certificate will contain information related with name, address, passport details etc. How we can achieve this?
In my view, we will have to create one Z-RFC. The ABAPer will create the Z-RFC. Now the input for the Z RFC will be employee no. The output will be Name, Address and Passport details.
The information provided in table format needs to be converted into PDF form. How we can do so? What all services needs to be activated for this?
Regards,
GaryHi.
In SQ02 create info-set. You need table. Choose Table join... (Table LFA1).
ThanDrag and drop requared fields from left to right(to field gruop).
You can use button Join to join some more tables(LFB1 etc)
Save it and generate.
After that go SQ01,enter name of query and click Create, while doing it select Created infoset.Save...
Than choose buton InfosetQuery and select which fields do you want in selection and output list.
Than go QUERY-MORE function-Generate program. Mantion this name.
Go se93, create transaction with this name of program -
Headstart for release 11i financials
I believe there was a version of headstart for generating custom forms for release 10.7sc oracle financials.
will there be a version that will generate for release11i/designer6iYes, Headstart for release 11i is currently under development. We hope to have this release available later this year.
Regards,
Lauri -
How to deploy custom development with JDI
We use JDI to deploy webdynpro for ESS application. for that we create a track, check in ESS components in the track and set up run time systems. now we are going to do custom development, for example: create interactive forms, etc.. we would like to use the same procedure to deploy modifications, but we could not found any software components to check in for the track. we are wondering, what should we do for our customer development? how do we create track without any software components?
Thanks
Jane ZhouHi
U can create the prduct and component by logging to SLD
http://hostname:port/sld
and then clicking on software catlog...
regards
Krishna -
How to deploy custom development
We use JDI to deploy webdynpro for ESS application. for that we create a track, check in ESS components in the track and set up run time systems. now we are going to do custom development, for example: create interactive forms, etc.. we would like to use the same procedure to deploy modifications, but we could not found any software components to check in for the track. we are wondering, what should we do for our customer development? how do we create track without any software components? If we don't use JDI, how do you get the modifications in to development environment after they are tested in NWDI? Do you allow developers to connect to sdm for development system driectly?
Thanks
Jane ZhouHi,
For that we should be creating a software component in SLD.
Define the required DC's for that.
After doing this we need to create track for this software component.
From then the way to develop will be same as modifying any ESS application the only change will be instead of saying create project in inactive DC's we say create application for the new Software component.
Regards,
Nagaraju Donikena. -
Here PO have been raised by the Stores incharge, and there is only one MD approval for every purchase
How will he come to know the list of PO's which have to released
Is there any Transaction which only shows the PO's which has not been released???Did you check transaction ME28.
Since there is only 1 Release Code create a Variant for Release Code.Once the person executes the Transaction he can see the PO pending for Release.
You can also activate workflow so that the person can get the mail notiification showing which PO are pending for Release.
Regards
Vaibhav Mahajan -
MM:Release Strategy for Release Order again Approved Contract
Hi,
Release strategy for Release Order is required or not against approved contrat??
As fas as I know once the contract is approved, release order is not required to approve again.
This is the standard setting from SAP or We need to do some setting for this??
In my support project I have studied the release procedure and found that, same release strategy and release Group has been used for Purchase Order and Contract.
Please let me know if anyone have faced this rquirement or I have to go for Z development for this requirement.
Thanks you.Hi Lalita,
Thank you for your quick suggestion.
yes definitely the release stratergy and release group should be set up separately but here both are same
that is the reason this is picking of the same release procedure again evenif the contract is approved.
we have following release characterstic for the release procedure.
1) Purchasing Group
2)Total Net Order Value
3)Order Type
4)Purchase Organisation
5)Material Group.
I think for the above characterstic we must a separater value for PO and Contract but Currently all are merge
in this only
But Can you tell me "Release Order should be subjected to release procedure" this is correct or not .
If yes then what is the base for this, I mean is it working on the concept that " If do relevent
release characterstic value is found then no release procedure and this is treated as autorelease in sap"
Thanks you. -
Error while assigning user for release approval path for payment release
Hi everyone,
I am trying to assign user for payment release in SPRO. I have defined upto 'Define relevant document types for release for payment', after that while assigning user in terms of position for release and save it, i am getting error 'Program error: ASSIGN with length 0 in program "MP120800" '.Because of it i can t proceed further.
The data in details below;
1. Create Workflow Variant for Release for Payment
1000 SAP
2. Assign Company Code Workflow Variant for Release for Payment
1000 1000 SAP
3. Define Release Approval Groups for Release for Payment
0001 Vendor A
0002 vendor B
0003 Vendor C
0004 G/L accounts
4. Define Release Approval Paths for Release for Payment
0001 Vendor high
0002 Vendor middle
0003 Vendor low
0004 G/L accounts
0005 Other
5. Assign Release Approval Paths for Release for Payment
1000 KZ 0001 0001
1000 KZ 0002 0002
1000 KZ 0003 0003
6. Assign Release Approval Procedure for Release for Payment
1000 0001 20,000.00 KES 1 WS10000052 WS00400011
1000 0002 50,000.00 KES 2 WS10000052 WS00400021
1000 0003 1,000,000.00 KES 3 WS10000052 WS00400022
7. Define Relevant Document Types for Release for Payment
1000 KR
1000 KZ
8. Define Users with Authorization to Payment Release
1000 0001 1 20,000.00 KES
1000 0001 2 50,000.00 KES
1000 0001 3 100,000.00 KES
here i have selected the option and tried to create Orgobject, i am getting following error
Program error: ASSIGN with length 0 in program "MP120800"
If any corrections in the definitions, Please let me know.
Thanks in advance!!Hello,
Please start the report RSWOGIND, set also the checkbox "generate all
ObjTypes from new". This should solve the problem.
Best regards, Hana -
Developer 6i Release 2 for NT - WebDB missing ??
Hi,
I have downloaded and installed Developer 6i Release 2 for NT but when I tried to configure the virtual directories I found that the default WebDB Web server/Listener is missing in the downloaded version.
(But in the installation manual, they mentioned it is available with this download)
In the Windows-Control Panel-Services, there are only 2 services are installed (Forms Server and Reports Server), But earlier when I installed in my previous project, it included another service "Oracle WebDB Listener", which is missing in this downloaded version.
Please help me in clarifying my below queries :
1)For web-deployment of Developer Forms 6i, what are the Oracle products to be purchased ?
2)Whether Developer 6i Release 2 for NT includes Oracle Default Web-Server/Listener (i.e. WebDB Release 2.2)
(or) I have to purchase and install Oracle 9i Application Server which includes (Oracle9iAS Portal - WebDB 3.0)
3)Whether below combination is compatible with each other and supported by Oracle :
a) Windows NT 4.0 (or) Windows 2000
b) Oracle8 Enterprise Edition Release 8.0.5.0.0
c) Developer 6i Release 2 for NT
d) Oracle9iAS Enterprise Edition
thanks and regards,
Shashi
[email protected]
FYI: The location of the d[i]Long postings are being truncated to ~1 kB at this time.To run Oracle Forms 6i on the Web you need to license Oracle9iAS EE version 1.0.2.
This includes portal and will automatically configure the Forms installation for you. -
How to set the status for a customer plan to RELEASED.
Hello all,
I created a program for mass creation of customer plans. But after the creation of a plan, the status should be set to released, so that the user can go about creating the trade promotions for the customer plan. Can anybody tell me how to set the status of a customer plan to RELEASED.
Thanks,
Disha.Hi Clemens,
I am not talking about doing it in the CRM_UI transaction..I created a program..which would create the customer plans based on the planning account data provided. I was succesfull in creating the plans, but I am not knowing how to release it, if only anybody can tell me about a Function module or method, which can help me do this, that would be great
Thanks,
Disha. -
Problem with custom task for approval
Hi Experts,
I have created webdynpro for abap application and custom task for apporval of the clock correction. I have maintained the visualization parameter in SWFVISU. But when I clicks on the approval task in UWL, it opens R/3 screen and it shows "Work item 000090007959 cannot be read".
Could you please give me solution.
Thanks
SameerHi,
We cleared the cache and tweaked the system
Now its working -
Need to do the security for "release" pre-approved batches
Hi Floks,
We need to control the finance users just for entering pre-approved batches and submitting only (not allowed for release) and then the finance manager will "release" the same batches and do the distribute costs.
Can any expert help me, if any posibility to do this? (11.5.10.2 projects)
Thanks in advance,
SuryaHi,
Exclude the below Function from the Users' Responsibilities and also remove the REVIEW Menu because User can Release the Batches from this Menu as well. If the Users need to search the Batch for review then they can search using ENTER Menu.
Function Name: Pre-Approved Expenditure Entry: Release
I did for 12.0.4. No idea about 11.5.10.2.
Regards,
Khan. -
How to create new SW component for custome development?
We are looking to develop custom webdynpros and need to create our own SW components.
I've tried to define them in the SLD that the NWDI is connected to and when creating the tracks for the custom development, I do not see our new defined SW when trying to add the SW component to the track.
Any ideas? Are we going about this the wrong direction?
Thanks!!Once you add component in SLD if you want to add that component to your track ,there will be a button Update CMS in domain data or track data .click that and it will refresh and fetch your newly created component.then go ahead and add component to your track
reward points if helpful
Maybe you are looking for
-
How to set automatic backup in XE 10.x.x.
Hi there, i have installed Oracle XE in Windows XP and Windows 2003 server. Is there any option to set incremental backup as daily basis and it has to move specified drive at scheduled time. Thanks, Gobi
-
How can i open software from a school book on my macbook pro
I am trying to open up a cd that came with my school book and it says i cannot open it because its for WINDOWS... i have a macbook pro. I really need to study from this CD - does anyone know what I can do???
-
Hi All, I encountered a strange problem in oracle PL/SQL. I have a select query which fetches records from more than one table and it returns n rows lets say 1000 rows. Note: The tables used in select query have a constant data.At any time i query, i
-
Grid control not working after clone
Hi: After ebs 12.1.3 on linux clone, I found grid control doesn't work. Database is 11.1.0.7. Don't know if it worked before or not. I managered to start up the agent, secured the agent, upload agent. From the grid control, I can see the host is up,
-
Can not find BIOS update for Satellite A30
Hi friends. I'am not found Toshiba A30-203 a new BIOS update. I want install the windows vista but this error sccren. Error message: "A computer has been detected and windows has been shut down to prevent damage to your computer. If this is first tim