Customizing Oracle Database Error Message Using Oracle JVM

Avi (that everybody on this forum knows) has just written the following article:
http://www.oracle.com/technology/tech/java/jsp/parameterized_custom_messages.html
Check it out, Kuassi

I got blank space when try to access Oracle Database Error Messages 11g release 2 pdf version. Not sure if it is because of my browser or not. I'm using firefox 6.0.2 in Slackware 13 64 linux.I do not see any PDF link for "Oracle Database 11gR2 Error Messages" Guide, only the HTML version is available.
Error Messages
http://www.oracle.com/pls/db112/to_toc?pathname=server.112/e17766/toc.htm
11gR2 Docs
http://www.oracle.com/pls/db112/homepage

Similar Messages

Incomplete list Oracle Database Error Messages Part Number B14219-01

The following regards documentation on Oracle® Database Error Messages Part Number B14219-01 as read on http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14219/intro.htm
Reading an example on Message Stacks in section 1 Using Messages, the following error description is nowhere to be found in the main list: ORA-06502. So are many other very common errors like ORA-00942 ¿Are these described in another book?
Thanks,

Hello again. I have learned that some of these older low-number error messages were present in the code in a different and abbreviated format than the one eventually agreed upon. These messages were entered by hand in the Error Messages book. When we began generating the messages directly from the code, some of these older messages were inadvertently dropped. We hope to fix this problem in the next release by changing the code. I apologize for any inconvenience this causes. For now the only workaround is to go back to an earlier version of the documentation, as the meaning of the messages has not changed.

Interesting Error message using ORACLE and java

Hi Everyone.
i'm using Java beans, JSP, Oracle db.
I'm using classes that work on other projects.
has anyone seen this error before ?
Error Message: Fail to convert to internal representation
Stack Trace: java.sql.SQLException: Fail to convert to internal representation
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:273)
     at oracle.jdbc.driver.OracleStatement.getLongValue(OracleStatement.java:3194)
     at oracle.jdbc.driver.OracleStatement.getIntValue(OracleStatement.java:3141)
     at oracle.jdbc.driver.OracleResultSetImpl.getInt(OracleResultSetImpl.java:329)
     at oracle.jdbc.driver.OracleResultSet.getInt(OracleResultSet.java:1420)
     at weblogic.jdbcbase.pool.ResultSet.getInt(ResultSet.java:290)
     at justice_center.database.JuvenileNetworkBean2.getVecLogIn(JuvenileNetworkBean2.java:273)
     at jsp_servlet._justice_center._juvenile._juv_login._jspService(_juv_login.java:110)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:106)
     at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:907)
     at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:851)
     at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:252)
     at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:364)
     at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:252)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
what do you think error is when you look at this trace?
stephen

woops never mind
this s[6] = Integer.toString(rs.getInt("fieldname"));
should have been this
this s[6] = rs.getString("fieldname");
stephen

How to Connect Oracle Database 10g with using Oracle Dev 10g

Hello there,
I have problem with connection on database 10g using oracle dev 10g on the same server.
The message is: TNS... bla..bla... it means not connect.
Please advice
Regards
Leksono

just simple
copy the from the database instance the tnsnames.ora
file's entried into developer folders tnsnames.ora
file and you can connect to DBFirst of all there is no such error as TNS... bla..bla... it means not connect.
there are several errors for the tnsnames, post the exact error
And it is not recommended that you copy it from the database's tnsnames file, it doesn't always work.
to configure the tnsnames.ora you have 2 ways, manual and GUI.
For GUI use the Net configuration assistance from your Devsuite home and for manual you need edit the tnsnames.ora file usually under %ORACLE_HOME%/NETWORK/ADMIN
You need to specify the connection string name, the hostname and the database SID name. It should look something like this.
<connection identifier> =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = host name)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = SID)
)Regards,
Tony

Customizing Predefined Database error messages

Hi,
I've a ADF table from the view object in my page. The table has two columns and column 2 is mandatory from entity side (in db not null). While filling the table from the page, I kept 3 row's value empty in 2nd column.
Now on submit, it throws validation message which is as expected. But as I left 3 field in column 2 blank, in the message it says "Column 2 : Please enter a value" three times.
My customer wants that instead of three message string, it should display one message string like "Please enter values for column 2"
Is there any possibility to concatenate the 3 message string into single message? If yes what is the way to achieve it?
We are using JDeveloper 11.1.1.4
Thanks in Advance
Arunava

Hi,
I'm also facing same problem since many days..I'm unable to concatenate multiple duplicate error messages into a single message.I've a ADF table from the view object in my page.When I'm entering multiple row values in a single column as a blank values(which are mandatory), and after When i click the commit,AttrValException is being occured and predefined error messages are being displayed in a dialog box.As the entered blank values are from same column, the error messages are duplicate as shown below::
(For example):
Error:
EmployeeId :You Must enter a Value
EmployeeId :You must enter a Value
EmployeeId :You must enter a Value.
When I click the commit button,Is there any way to handle the exception and concatenate these error messages into a single message.
I'm using JDeveloper 11.1.1.4.0
Thanks in Advance
Krishna Murthy

Jdev11g;Customizing Business Components Error Messages

Hi All,
Using Jdeveloper 11.1.1.2. I have customized the BC error message using message bundle. My message bundle class is
public class MessageBundle1 extends ListResourceBundle {
private static final Object[][] sMessageStrings =
new String[][] {
{ "JBO-26048","Child records exist against selected record " },
{ "EMP_JOB_FK","Child records exist against selected record "},
{ "JBO-25013","Record already exist"},
{ "JOB_ID_PK","Job ID already exsist"}
/**Return String Identifiers and corresponding Messages in a two-dimensional array.
protected Object[][] getContents() {
return sMessageStrings;
Need help on couple of questions/issues I am facing on this:-
1) Though I have given the error message for JBO-25013 and JOB_ID_PK, still I am getting following error message on UI , when saving the new record
"Too many objects match the primary key oracle.jbo.Key[AD_PRES ]."?
2) Why I am getting "Attribute JobId in HrModule.JobsView1 is required." along with above error message in the error popup window?
3) When deleting the record, though I am getiing desired error message on UI "oracle.jbo.DMLConstraintException: Child records exist against selected record ", why error message is prefixed with "oracle.jbo.DMLConstraintException".?
4) How I can localize the error messages to another language?
Thanks
Vikram
Edited by: Vikram K on Mar 22, 2010 3:23 PM

There is surely a section in the Fusion Developer's Guide on custom error/exception handling. Have you found it? Perhaps you have since you are considering overriding view/model framework objects.
In JDev 10g there was very good documentation for how to do this in the ADF Developer's Guide. As far as I could tell, the equivalent manuals are the Fusion Developer Guides for ADF 11g. I think you will have a lot of luck getting what you want if you research this a bit more.
In ADF 10g, what you are alluding to certainly was the solution to what you wanted. I do not know a whole lot about version 11g, but I suspect it is similar in this regard.
in 10g this process started with overriding the ADF life-cycle.
Once you get this working I also found some on-line commentary/articles from Avrom Roy-Federman on how to additionally extend error handling.
All this said, you also seem to be asking some other questions (jobid and such), the solutions of which would require us to have more information about your application, I think.
Maybe you can take one question at a time? Or start multiple threads?

Installation error message for Oracle Database software for version 10g

Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil

855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course?

Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007

Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

Retrieving data from oracle database and displaying using servlets

//DataRetrieving.class file
import java.io.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class DataRetrieving extends HttpServlet{
public void doGet(HttpServletRequest request, HttpServletResponse response)throws
ServletException, IOException{
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("A program for connecting oracle database");
try
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:ORCL", "scott","tiger");
Statement stmt = con.createStatement();
ResultSet r = stmt.executeQuery ("SELECT ename,job,sal,comm,deptno FROM emp");
while ( r.next() )
     String bar = r.getString("ename");
     String bar1 = r.getString("job");
     float bar2 = r.getInt("sal");
     float bar3 = r.getInt("comm");
     int bar4 = r.getInt("deptno");
     //out.println(r.getString(0)+" "+r.getString("ename"));
     out.println("hi");
     out.println(bar1);
r.close();
stmt.close();
con.close();
catch (Exception e)
out.println("ERROR : " + e);
//web.xml file
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app>
<servlet>
<servlet-name>Hello</servlet-name>
<servlet-class>DataRetrieving</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Hello</servlet-name>
<url-pattern>/DataRetrieval</url-pattern>
</servlet-mapping>
</web-app>
while running the servlet , i am unable to retrieve the data
The error message i am getting is
A program for connecting oracle database
ERROR : java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
after running the servlet.
what could be the problem?

import java.io.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class myserv extends HttpServlet
public void doGet(HttpServletRequest req,HttpServletResponse res)throws ServletException,IOException
res.setContentType("text/html");
PrintWriter pw=res.getwriter();
pw.println("Connecting data base");
     try
     Class.forName("oracle.jdbc.driver.OracleDriver");
     Connection con=Drivermanager.getConnection("jdbc:oracle:thin:@localhost:1521:orcl","scott","tiger");
     Stamtenet st=con.createStament();
     Resultset rs=con.executeQurey("select * from emp");
     while(rs.next())
     rs.getInt("empno")+" "+rs.getDouble("sal"));
     }catch(Exception e)
}

To Report Error message in oracle website search option

I have encountered an error message in oracle website search option. There was some compilation error in their JSP pages I did not know how to inform the Otn team. Can any one please guide me.
regards,
sagar

You can use the below information for raising an Alert for adapters.
Specific Error Information from the Adapter Engine:
Container Element
ABAP Dictionary Data Type
Meaning
SXMS_TO_ADAPTER_TYPE
CHAR70
Adapter type
SXMS_TO_ADAPTER_ERRTXT
CHAR70
Error text from the Adapter Engine
Refer the below link:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

The exception error message was: oracle.jbo.NoDefException: JBO-25002: Defi

Hi,
I added a DFF through create item "flex" in iRecruitment (View applicants page).I am getting the following message:
"The flexfield listener failed while getting the value for segment Job Title from column ASS_ATTRIBUTE1 of the descriptive flexfield with application short name PER and name PER_ASSIGNMENTS. Please contact your system administrator. The exception error message was: oracle.jbo.NoDefException: JBO-25002: Definition AssAttribute1 of type Attribute not found".
Regards
Radhika

Check the DFF you have added according to the error message to confirm that it is setup properly and compiled.
--Shiv

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

Can i use Oracle Database Audit Vault and Oracle Database Firewall on Solaris?

4195bee8-4db0-4799-a674-18f89aa500cb wrote:
i dont have access to My Oracle Support can u send text or html of document please?
Moderator Action:
No they cannot send you a document that is available only to those with access to MOS.
That would violate the conditions of having such service contract credentials.
Asking someone to violate such privileges is a serious offense and could get that other person's organization banned from all support and all their support contracts cancelled.
Your post is locked.
Your duplicate post that you placed into the Audit Vault forum space has been removed (it had no responses).
This thread which you had placed in the Solaris 10 forum space is moved to the Audit Vault forum space.
That's the proper location for Audit Vault questions.

Send custom error message using IDoc conversion rule?

Hello,
I am using an Idoc conversion rule in BD79 to load cost centers. In my conversion rule I use a conversion exit function module to concatenate 2 specific characters and sending cost center value together and then this output value placed in the receiving cost center field. This works fine, but now I want to send a custom error message to the idoc and fail the idoc if the sending cost center value is greater than 8 digits.
Does anyone know how to send an error message or update an idoc with an error message using a conversion rule (bd79)?
Thank you,
Rhonda

Hi Rhonda,
Any luck on the below.. i have a similar issue...
Sorry to hijack your thread...

ARM approval error after upgrading to SP14: Database error while using the secure store.

Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
Gustavo

SAP just delivered a note to fix this issue. The number is 2022294.

To display a continuos Error Message using BADI

Hi Everybody,
                    There's a transaction that makes use of classes and interfaces to display an ALV grid with input enabled frames and fields. There's a need to display an error message using a specified BADI method, which gets triggered after the user enters the input. The error message is working fine for the first time.<b>But when i'm trying to enter the same input and press enter after the error message, the transaction is getting closed. How can i display the same error message, until and unless the user enters the correct input ?</b> I've tried to trace the control using the debugger after the enter is pressed, but the debugger is also getting closed and the control is coming out of the transaction. Help me out in displaying the error message.

Hi,
Open the interface and go to the Methods tab.
Select the Method and click on Parameters.
In the method parameters, declare a variable
RETURN      Changing      Type     ALM_ME_BAPIRET2_T.
Now, inside your code, declare   DATA : ls_return TYPE bapiret2.
and populate this RETURN table, something like:
        if not ( wa_mara-mtart eq 'SPAR' or wa_mara-mtart eq 'ZMRO' ).
    CLEAR ls_return.
    MOVE 'E' TO ls_return-type.
    MOVE 'ERR_MESSAGE' TO ls_return-id.
    MOVE '999' TO ls_return-number.
    MOVE 'Enter proper error message here' TO ls_return-message.
    INSERT ls_return INTO TABLE return.
    endif.
Then, back in your program, check if this table is empty proceed otherwise, STOP or EXIT.
Regards
Subramanian

Customizing Oracle Database Error Message Using Oracle JVM

Similar Messages

Maybe you are looking for