DAC Task are queued but not running

Hi Everybody,
Currently we are running the ETL for only Financials and there are 394 tasks in total out of which 285 have been completed successfully. At times some of the tasks would just get stuck on particular action. For e.g The analyze task after dimension population would remain in the queued status and would never switch to run mode. So we had to abort the ETL and restart it. This action resulted in successful completion of the previously queued task. Now for past two days the ETL is once again stuck (queued but not running).
For e.g The following task is showing status of running
51     SIL_InventoryProductDimension_SCDUpdate     Running     2009-03-02 21:09:59.0                    DataWarehouse     DataWarehouse     SILOS          Update Slowly Changing Dimension     Informatica     0     0     -2     CUST R11 5 10
But if I right click on the details
I get this
1     SIL_InventoryProductDimension_SCDUpdate_Full     Running     2009-03-02 17:40:41.0     2009-03-02 21:09:09.0     3 hour(s), 28 min(s), 28 sec(s)     Verifying if workflow still running on Informatica Server 'Oracle_BI_DW_Server'.
If still running will attach to the workflow.     DataWarehouse     Informatica     0          -2     0
And the remaining detail tasks for this are in queued status.
What could be the reason?
Does it need the Infomartica workflow manager open? It is open currently open but must have been accidently closed in between.
Informatica services have always been running.
Thank you very much
Nilesh
[excel dashboard|http://www.exceldashboard.org]
dashboard Software
[Access Dashboard|http://www.accessdashboards.com]
[Dashboard Reporting|http://www.reportingdashboard.com]
Edited by: njethwa on Jan 6, 2010 5:39 PM

Hi
This Sometime happens with DAC.We faced the same issue and had an SR open with Siebel for almost 2 weeks,they Couldnt help us out.
Restart your DAC Server and Do a Dryrun and then run your full ETL .
The Analyze task would not hang anymore.
I dot have any logical reason why this happens,but i am guessing it has to do with some java heap memory.So restarting the Server would free up the memory.(i am guessing but not sure).
But it Works.
Try it
Let me know if this helps
Thanks
H

Similar Messages

Email gets queued, but not sent until I login to my account on the server.

This is very strange. Let me explain.
1. Snow Leopard Server 10.6.2 running on an iMac.
2. I have the Mail Service running on the server. I can receive emails without problems.
3. Using my Snow Leopard Server email account, I attempt to send an email to another account (e.g. a mac.com email account).
4a. If I am actively logged into my Snow Leopard Server account *on the iMac* (e.g. via VNC, as long as my desktop is active), the email will arrive successfully. Here are the mail.log messages:
postfix/smtpd\[69030]: connect from \[External Host Address]
postfix/smtpd\[69030]: 942814AD55B: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
postfix/cleanup\[69037]: 942814AD55B: message-id=<[email protected]e. com>
postfix/qmgr\[65313]: 942814AD55B: from=<[email protected]>, size=604, nrcpt=1 (queue active)
postfix/smtpd\[69040]: connect from localhost\[127.0.0.1]
postfix/smtpd\[69040]: C611B4AD568: client=localhost\[127.0.0.1]
postfix/cleanup\[69037]: C611B4AD568: message-id=<[email protected]e. com>
postfix/smtpd\[69040]: disconnect from localhost\[127.0.0.1]
postfix/qmgr\[65313]: C611B4AD568: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
postfix/smtp\[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
postfix/qmgr\[65313]: 942814AD55B: removed
postfix/smtp\[69042]: C611B4AD568: to=<[email protected]>, relay=smtp-mx005.mac.com\[17.148.17.5]:25, delay=0.48, delays=0/0.1/0.14/0.23, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
postfix/qmgr\[65313]: C611B4AD568: removed
4b. If, however, my Snow Leopard Server account is either logged out, or even just "fast user switched" to the Login Window, the email gets queued, but not sent to the external email address. I get the following four messages in the mail.log file:
postfix/smtpd\[69030]: connect from \[External Host Address]
postfix/smtpd\[69030]: B5F574AD582: client=\[External Host Address], sasl_method=CRAM-MD5, sasl_username=MyUserName
postfix/cleanup\[69037]: B5F574AD582: message-id=<[email protected]e. com>
postfix/qmgr\[65313]: B5F574AD582: from=<[email protected]>, size=604, nrcpt=1 (queue active)
4c. The instant I login to my machine at home (e.g. via VNC), the email finishes processing. The below messages are logged, and my external email account receives the email:
postfix/smtpd\[69160]: connect from localhost\[127.0.0.1]
postfix/smtpd\[69160]: 20B244AD5B0: client=localhost\[127.0.0.1]
postfix/cleanup\[69037]: 20B244AD5B0: message-id=<[email protected]e. com>
postfix/smtpd\[69160]: disconnect from localhost\[127.0.0.1]
postfix/qmgr\[65313]: 20B244AD5B0: from=<[email protected]>, size=1043, nrcpt=1 (queue active)
postfix/smtp\[69038]: B5F574AD582: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1]:10024, delay=74, delays=0.1/0/0/73, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 20B244AD5B0)
postfix/qmgr\[65313]: B5F574AD582: removed
postfix/smtp\[69163]: 20B244AD5B0: to=<[email protected]>, relay=smtp-mx006.mac.com\[17.148.17.6]:25, delay=0.49, delays=0.09/0.01/0.15/0.25, dsn=2.5.0, status=sent (250 2.5.0 Ok, envelope id [email protected])
postfix/qmgr\[65313]: 20B244AD5B0: removed
I'm very much at a loss here. It's as if the act of logging out (or fast user switching to the Login Window) suspends some process that is required for my email to process. But .... why?
Any ideas? Any additional information I can provide to help figure this out? Fwiw, I used to run Tiger Server (never tried Leopard Server) and never had this problem.
Rob

Looks to me like the anti-virus scanner, amavis. The clue is the line:
postfix/smtp[69038]: 942814AD55B: to=<[email protected]>, relay=127.0.0.1\[127.0.0.1\]:10024, delay=0.25, delays=0.1/0.01/0/0.14, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as C611B4AD568)
where the 10024 is the default port that Amavis runs on. Postfix is configured to pass mail through this port, and queues the mail until Amavis is available.
My guess, therefore, is that Amavis is set to run under your account rather than under the system, which is why it only runs when you're logged in. Off hand I have no idea how you managed this and that makes it hard to work out how to fix it. I'd start by looking for org.amavis.amavisd.plist in /System/Library/LaunchDaemons, /Library/LaunchDaemons and ~/Library/LaunchDaemons (it should be in the former, but if its in the latter that could explain it.

Import is not available all other actions are active but not import help?

Import is not available all other actions are active but not import help? I wish to import bookmarks from internet explorer, I am using windows 7

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"

Loops are installed, but not in Loop Browser

Hi All!!
I have just bought the four (newly packaged) GarageBand Jam Packs. I was so impressed with the demo "song" Victory (Full), that I have decided to use those loops for a project I am working on.
The "Victory" loops all play in the loop browser (all 137 of them) when I have "Victory (Full)" loaded for playback in GarageBand.
But.......
When I start a new project, the Victory loops are not available in the loop browser. This is rather perplexing for me.
What do I need? I need to find a solution to see these loops and maybe others that are missing (but not missing).
Thanks in advance for your help.
Rodger GW

Yes. The demo song is in D, and I have ensured that I have set the new song to be in D.
I have also trashed the preferences, trashed the indexes, rebuilt the loop browser by dragging the loop folders from all sources (sources being those defined by the install script), and ensured that the Keyword Browsing is unckecked and I have reset the keyword layout.
The only thing I have not done is the laborious task of importing each of the 137 Victory files into the the track window then translating each individual part as an Apple Loop. The reason for this is two fold: 1. I am on the lazy side of life and think there should be a quicker way; and 2. I have checked the other files contained in Library -> Audio -> Apple Loops -> Apple -> Jam Pack 4 - Symphony Orchestra are available in the loop browser under the Jam Pack 4 and the Loops Pull Down Menu.
I am very unsure of the next thing to try.
Rodger GW
PS I have even tried to have those loops from the "Victory (Full)" file be selected as favorites. They now reside in Home -> Library -> Audio -> Apple Loops -> User Loops -> SingleFiles, but do not appear in the Favorites tab in the Loop Browser in any new project.
Thanks in Advance,
RGW

I am using Outlook 2010. Changes made to my iPhone 4 or my iPad2 appear on each other (tasks, calendar, Contacts) but not in Outlook. Why is this?

I am using Outlook 2010. Changes made to my iPhone 4 or my iPad2 appear on each other (tasks, calendar, Contacts) but not in Outlook. Why is this?
Also, changes made in Outlook do not appear on Phone or IpAd

I'm guessing outlook doesn't support iCloud or vice versa or the settings for iCloud in Outlook are turned off. Just a guess though I don't use Microsoft products if I can help it.

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is do

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is doing the same could not install. Even after I registered my copy. The last time I used this program it showed up under tools and worked great. any suggestions on whats going on and how I can get around this?.by ralphd3g

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

Compile correct but not run java programs

I have problem. Java program copile correctly but not run. I can't understand this one.
**this is the error**
Exception in thread "main" java.lang.NoClassDefFoundError: suminda
Caused by: java.lang.ClassNotFoundException: suminda
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Could not find the main class: suminda. Program will exit.

The error is telling you that the jvm could not find a class named suminda. Are you aware that class names are case sensitive? Suminda is not the same as suminda for example.
This error usually happens when you haven't specified the classpath correctly. A simple thing to try isjava -cp . sumindaHere's some links that may help.
[http://www.kevinboone.com/classpath.html]
[http://java.sun.com/javase/6/docs/technotes/tools/findingclasses.html]

How to programmatically load and show the front panel of a vi but NOT run it?

Is there a way to load and show the front panel of a vi but NOT run it? I am starting with the AsynchronousCallAndForget.vi from the example finder and inserted an invoke node with the FP Open method call prior to the Start Asynchronous Call node. The vi I am loading has the "Run when opened" unchecked and the menu bar IS visible so I can manually click the run arrow. Thanks!
Solved!
Go to Solution.

Why are you using the Async call? If you simply open the VI reference, then call the FP.Open method this works fine. You can then call the VI run method with Wait Until Done set to false if you wish to run it Asynchronously, this is how we did it in ye olde days before we had this new fangled "Start Asynchronous Call" stuff.
Charles Chickering
Architecture is art with rules.
...and the rules are more like guidelines

I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens. It says just the improvements from 8 are available but not the whole ios. What to do?

I have ios7.1.2 on my iphone and am trying to upgrade to 8.0.2. I haven't installed 8 yet and when I try and upgrade nothing happens. It says ios8.0.2 improvements from 8.0.1 are available but not the whole ios. What to do?

It sounds like maybe 8.0.1 has downloaded onto your phone but not installed. You can check for it in Settings > General > Usage > Storage, Manage Storage. If it's there you should see it at the top of the list of apps. Swipe to delete it. 8.0.1 was pulled by Apple quickly after it was introduced due to issues and replaced by 8.0.2. Once it's deleted you should be able to download and install 8.0.2.

Constant Error; Adobe Flash Player 11.4 r402 has stopped working. But NOT running Trusteer Rapport.

I am experiancing this unbelieveably annoying and constant Flash error; Adobe Flash Player 11.4 r402 has stopped working.
But NOT running Trusteer Rapport, I never have, and it's not even installed on my computer. So what's causing this?

There were a couple AntiVirus/AntiMalware products that keep coming up, but I haven't validated that in the lab and don't want to call anyone out publicly without reporting the issue to them first.  If you could tell me what antivirus/antimalware products and versions you have installed, that would be helpful.
So, third party stuff aside, I'd like to know more about the crashes your seeing:
1.) Please provide links to the Firefox crash reports. If you have multiples, the first few would be great.
     In Firefox, type about:crashes in the address bar
     If the link starts with "bp...", it's already been submitted -- just right-click on it and copy the link, and paste it into the reply here.
     If not, click it to submit it, and copy the subsequent link.
2.) In firefox, type about:support
     Just copy and paste the output into the reply.
3.) In Firefox, type about:plugins
     Please copy and paste the output into the reply
4.) Please provide the output of the DirectX Diagnostic Utility
     Click Start > type "dxdiag" [enter]
     Click Save All Information
     Copy the output of the file into the reply, or use Adobe SendNow/DropBox/PasteBin to share the file.
5.) If you can provide an exact URL and step-by-step instructions on repeating the crash (if it's consistent), that would be really helpful. My goal is to build out a configuration that matches yours as closely as possible, reproduce the problem and then debug it.
If you're not comfortable sharing that diagnostic information publicly, send me a private message. Just click my name and use the options on the right.
Thanks!

Iphoto allows you to share photos by selecting them and then emailing as an attachment. I'm not able to do that now, curser isn't appearing in the email address box when I attempt to address my email. Photos are attaching but not able to include an addr

iphoto allows you to share photos by selecting them and then emailing as an attachment. I'm not able to do that now, curser isn't appearing in the email address box when I attempt to address my email. Photos are attaching but not able to include an address.

Windows Phone 8.1 is so full of surprises and opens the Windows Phone faithful up to a new world of apps.
Video editors and
file managers are just some of the new app categories possible thanks to Windows Phone 8.1. We’ve seen an official video editing app from Microsoft already, but today we finally get Files – the official file manager for Windows Phone.

I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

now it is working?! Go figure. Yeah! Thanks anyway......

Billing docs are generated but not account docs

Hi
Today I got a ticket which says billing docs are generated but not accounting docs. I went to vf05 and found that it is indeed true. accounting doc was not generated for one of the billing doc. How can I what went wrong and how to solve this.
Will reward suitably. Plz help.
Thanks

Hope SD-FI integration is not properly maintained.
This can be one of the reason. if the problem is related to GL account determination maintain it in VKOA.
Assign points if useful
Regards
Raghu Ram

How do i make the back and forward buttons function? they are visible but not functional.

I have firefox 8.0.1 and my back and forward button are not working. They are visible but not functioning. I have tried starting in safemode and without any add-ons and the back and forward buttons are still not functioning. What do I need to do to make the buttons functional?

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

The training tutorials under creative cloud learn are loading but not playing

The training tutorials in creative cloud learn are loading but not playing, is there a problem with adobe tv?

Hi sarahhunter1,
Please try playing video in Google chrome browser.
Regards,
Romit Sinha

DAC Task are queued but not running

Similar Messages

Maybe you are looking for