Data aggregation by the 2 first characters of a characteristic

Hi,
in a query, i'd like to extract the two first characters of a characteristic and aggregate a key figure.
For example, i have the characteristic material number and the quantity.
Mat numb      0Qty
01AAAA         1
01BBBB         1
01CCCC         2
02AAAA         2
02DDDD         3
AATTTTT        3
Here is the result i want :
Mat numb      0Qty
01                 4
02                 5
AA                3
i can't use the selection condition because i don't know what is the value of the 2 first Characters. i don't want to modify the infocube by adding a new characteristic?
Is there any regular expression in the selection condition i can use ( for ex : for characteristic Material Number, select the first character between 0 and A and the second between 0-A and *) ?
Do i have to do it by using a user exit ?
Thanks for your help.

When I did that it juts brought over the text from the table of contence. I thought maybe that was needed. So I deleted what was their before and replaced it with what popped in. I did the same for the section pages. Just to see what happened. It brought in the section numbers and it did pretty much the same. I'm fine with relabeling my pages to match. The table of contents. I still would like that first chapter page in the table of contents to actually link to the page if possible. It still not linking right.

Similar Messages

Two times and dates show on the first page with an old set under the correct set.

I have a second tine and date showing on the first display page, like a shadow under the correct date and time. This is happenong on my iphone5, but was also there on my 4. Any ideas?

I would go to settings-general- reset all settings, if that doesn't work I'd do a reboot, and finally if I couldn't get that to work I'd do a restore as a new phone.

Does Roaming data syncs for the first time when app data are in download and installation process?

Hi,
I will store user Id in "HighPriority" Roaming data. When user will install app in another computer (with the same Microsoft Account), app will get user Id from Roaming data. Then I can implement all data sync over my cloud service.
There are 2 scenarios:
1. User downloads and installs app in another computer, but roaming data syncs/downloads for the first time only after several minutes -
It's bad for my app :(
2. User downloads and installs app in another computer and roaming data syncs/downloads at the same time (then I can get user Id immediately)
- Its great for my app :)
Which scenario is real in practice?
Does Roaming data syncs for the first time when app data are in download and installation process?

Umm no not that i remember. It just randomly started happening. I reformatted the hard drive for mac (journaled) but it was working fine since i did it until now

Why does the start up web page say my Firefox is out of date; and the link I click to to fix it says it IS up to date? Was the first one a lie?

Which is the lie, the first page or the second web page?
The details are that my first time user impression is that Firefox is a liar, or that the web page is developed by liars; or that the program doesn't function well as it said that my Firefox was out of date, but the link to fix the problem said that is was up to date. So, the only purpose of the statement that it was out of date was to get me to register, and that the company doesn't care what I think about it. I am totally open to another logical explanation. I mean you could give me an illogical explanation based on emotion but I'll just reject it and then uninstall Firefox because, well, that should be obvious. So, if it wasn't a lie, then the second page was a lie.... which is it?

If you get a pop-up message asking to update Firefox or plugins then such a message is likely a scam and you should never respond to such an alert to avoid getting infected with malware.
*Only update Firefox via "Help > About" or by downloading and installing Firefox from the Mozilla server and never via a pop-up or link on a web page.
*Plugins should only be updated via the plugin itself or by visiting the home page of the plugin.
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

How can I utilize text variable in my book which only uses data merge on the first chapter?

Hey ladies and gents, I'm trying to automate a process here and running into trouble. I have the first chapter of a book with several data merge fields (legal documents etc), and want the later chapters to pick up from what I have already merged via text variables or SOMETHING. From what I've tried, the options available to me are limited and buggy.
Using the running header with character styles almost worked, but it removes all visual tracking in text around it (I assume this is a bug) and it only works for the first/last instance of the style. I need something that will fill in all instances.
Here is an example of what I'm doing. In the ch1 document of my book I data merge the Name, Age and Occupation of a person. In chapter two I want to have a variable that takes the name that was merged in ch1. Any ideas? Doesn't seem possible!

I need some solution that references live text, specifically different fields that have been data merged. This solution needs to work between documents, so your cross-reference suggestion was in the right direction. If I data merge 'Plan Name' from a CSV file into my first document and mark it with something (character style, paragraph style, text anchor etc), I want to have places in my other documents that pull that exact text from the first.
If document 1 says 'the plan is XXXX', document 2 will copy that name, i.e. 'According to plan XXXX'. Whatever solution this is it's what I'm looking for.

Restrict on the first characters of a characteric value

Hi Experts,
I would like to restrict some characterics on the three or four first characters of the value. For example, imagine the value 'ABCD-1234'; i would like to filter only values which begin with ABC.
Is that possible unless doing a routine in the customer exit? If yes, how?
Thanks in advance.
Luc

I need to do this in the query def. The list of the values can change but the format will be always the same (beginning with ABC); that's why I can't make a range of values because I risk not to take into account all the good values.
This an example of values:
SEEC3-2004-321
SEEC3-2004-346
SEA31-2004-584
SEA31-2004-724
SCY54-2004-828
SCY54-2004-869
SEA31-2004-888
SCY54-2004-911
SEE54-2004-928
SEE31-2004-952
SEE54-2004-1034
I just want to restrict on values which begin with SEEC and SCY. Do you see a possible solution?*
Thank you all

Currency translation date fix on the first day of the month

Dear all,
is it possible to fixe one translation date per month that every transaction (goods income, purchase order, invoice, salesorder, payment,...) uses this exchange rate for booking?
The problem is, that this fixed exchange rate should only be valid for one company code in our SAP System. Therefore it is not possible to just change the rates in the SAP table TCURR.
Thank you very much in advance
Greetings
Bernd

Hi Bernd,
We have had the same case with CZ and we choose to use alternative exchange rate in OBBS, and then created a new exchange rate type - but offcause then your company code should be equal to a specific currency.
Example, when your settings in OBA7 for document type NI points at exchang rate type M, and you have assigned Alternative exchange rate type CZKK for Type M for exchange rates from CZK to XXX, then the document will be booked with the alternative exchange rate.
Best regards
Pernille

How to Open another WEBI from one WEBI by clicking a data point on the first tab?

Hello Guys,
I have a requirement in which user wants to open another tab by clicking a data point on one tab.
So, lets say we have a table in one Webi and its has following fields:-
Customer : Sales DOC: Month : Year : Qty : Amt
User wants, that if they click on Customer, it should open another webi which should show them a chart reflecting the data about that customer only.
How can I do that?
Regards
Prashant

Hi,
Check Below links about Hyperlink details
http://scn.sap.com/docs/DOC-21161
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0daee1d-0e38-2d10-0c91-8bb4ab5aa266?quicklink=index&overridelayout=true
Regards,
Anish

How to birng the data in data sources for the first time

Dear Gurus,
For the Personnel Development (0PAPD) i installed the datasoures 0HR_PA_PD_1, 0HR_PA_PD_2 from ECC and checked in RSA3 I found 0 records.
My question is any configuration should be done to bring the data into datasources. But in ECC there module is implemented and gone live long back ago, they are telling data is there in tables also.
Regards,
Kiran

Hi Kiran,
Please check with your HR functional consultant, whether the HR records are created with BW relevant infotype selected. For records to available in BW they have to maintain some infotype.
Regards,
Kams

Dynamic data on Screen -Display data Based On the First Field

hello Helping Minds..
I have Two Fields In MODULEPOOL SCREEN.
1--- BUKRS
2--- BELNR ..... Both From BKPF table.
My requirement is When i select a CompanyCode ( BUKRS ) In d first field,all the DocumentNO ( BELNR ) related to that CompCOde Shd be displayed in the 2nd field,
For Ex-
If i choose BUKRS = 1000,
and Then clicked the Belnr field, All d DocumentNO for BUKRS 1000 will be populated in d Dropdown list..
        BUKRS = 0001,
then BELNR = 0100000000 ,
                      0100000001 in d dopdown.
source code will be Appreciated...
Thnks in advance To D helping Minds

Process on value-request.
filed Bukrs module f4_bukrs.
field belnr module f4_belnr.
*module f4bukrs input.*_
if belnr is not initial.
select belnr bukrs from bkpf whre belnr = belnr.
else.
select belnr bukrs from bkpf whre belnr = belnr.
endif.               ""   Hey both these Condition lead to same thing...den Whts d use??
Firstly Belnr will be always Intial. cos it will be populated after we select the BUKRS. , Here am confused?
if t_bkpf is not initial.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'        " No idea Abt dis FUncn module, pls explain
endif.
end module.
module f4_belnr input.
if bukrs is not initial.
select belnr bukrs from bkpf where bukrs = bukrs.
else.
select belnr bukrs from bkpf whre belnr = belnr.
endif.
if t_bkpf is not initial.          ""   What is t_bkpf and y its used
call fm to CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
endif.
end module.

DYnamic Screen -Display data Based On the First Field

hello Helping Minds..
I have Two Fields In MODULEPOOL SCREEN.
1--- BUKRS
2--- BELNR ..... Both From BKPF table.
My requirement is When i select a CompanyCode ( BUKRS ) In d first field,all the DocumentNO ( BELNR ) related to that CompCOde Shd be displayed in the 2nd field,
For Ex- If i choose BUKRS = 1000,
 and Then clicked the Belnr field, All d DocumentNO for BUKRS 1000 will be populated in d Dropdown list..
 BUKRS = 1000,
then BELNR = 0100000000 ,
 0100000001 in d dopdown.
<<don't cross post/Duplicate else thread will be locked or deleted>>
Thnks in advance To D helping Minds
Edited by: Vijay Babu Dudla on Apr 25, 2009 4:57 AM

Process on value-request.
filed Bukrs module f4_bukrs.
field belnr module f4_belnr.
*module f4bukrs input.*_
if belnr is not initial.
select belnr bukrs from bkpf whre belnr = belnr.
else.
select belnr bukrs from bkpf whre belnr = belnr.
endif. "" Hey both these Condition lead to same thing...den Whts d use??
Firstly Belnr will be always Intial. cos it will be populated after we select the BUKRS. , Here am confused?
if t_bkpf is not initial.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST' " No idea Abt dis FUncn module, pls explain
endif.
end module.
module f4_belnr input.
if bukrs is not initial.
select belnr bukrs from bkpf where bukrs = bukrs.
else.
select belnr bukrs from bkpf whre belnr = belnr.
endif.
if t_bkpf is not initial. "" What is t_bkpf and y its used
call fm to CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
endif.
end module.

Going over Data limit for the first time?

We have never even gone close to the limit and all of sudden we're over! (1 phone, Mini Droid) I am on WIFI all day, no changes in apps or usage! What else can be going on? Sounds like this is happening to a lot of people too? I turned off the Mobile Data on my phone, and now it's not even connecting to my WIFI though?

I activated my new iPhone on November 7 at about 1 AM. I then plugged it in, made sure it was on Wi-Fi, and went to bed. When I woke up, I had data overage alerts. My Verizon said that I had magically used over 7 GB overnight. However, if I go to settings and then to cellular data, the amount of data used total was only several hundred megabytes. I called Verizon last night and explained the situation. They upgraded me to a 10 GB plan at no additional charge for the remainder of my pay period (5 days). They also talked to me about things like closing all of my apps immediately after I finish using them and anytime I'm on Wi-Fi making sure I turn cellular data off. I told him that I have had an iPhone for years and have never had to do any of those things. I never have used more then two gigs a month in my whole history of having an iPhone. The representative assured me there was probably some weird glitch so I went to bed last night, after making sure I was on Wi-Fi and plugging in my phone.I checked my usage on my Verizon, and it was it zero gigs before I went to bed. I plugged in my phone turned on the Wi-Fi and went to bed. When I woke up this morning my phone usage on my Verizon showed I had used more than five gigs of data last night. However, again when I go to settings and then to cellular data. My phone only shows I've used several hundred megabytes total since I activated it. I called Verizon support again this morning, and the representative was nice but not very helpful. She did assure me that I wasn't going to be responsible for overage charges, But I am concerned because my phone magically used half of the 10 GB plan last night. I have to have my phone because I'm on call for work, and I'm traveling. The representative suggested that I turn my phone off and turn it back on again. I did that, but I am not very convinced that that is going to solve any problem. I did get her to say on the phone that it was Verizon's problem and not my problem. She assured me that they are working to get this issue solved.
My iPhone is the only device on my plan. Could someone be stealing my data somehow?

How do I update items on a 2nd list based on data changes on the first list

Hi everyone, let me start by saying I am still learning about Sharepoint - what it can or can't do etc. I am also not a developer by nature. So it may take me little while to understand. Thanks for your patience and help.
I am currently working on Sharepoint 2007.
I have a Booking form and an Inventory form.
With the booking from I have a column where the user can select the inventory item to book e.g. BookedItem
With the inventory form I have a Availability column. (i.e. It's a text column populated with either Yes or No)
I've also got a view on the front page of my Sharepoint page showing users what is currently available for booking. This is just a filtered view of Inventory form. Basically it displays items where Availability = Yes.
What I would like to do is have a workflow that automatically updates the Availability in the Inventory list when an item is booked in the Booking Form.
E.g Item A is booked via the Booking Form. Item A's availability in the Inventory List should now the 'No'.
Users should now no longer be able to see Item A as an available item on my Sharepoint page.
I am struggle with linking the two lists and making the corresponding updates. I'd appreciate it someone could help me out.
Thanks.

Hi Anil
Thanks for the reply. I've attempted the steps in the link as shown but if the issue I am getting is because I am running Sharepoint 2007 instead. The example that you've linked is based on Sharepoint 2010.
Just to be clear I am following
"3. Now add one action : "Set Variable"
Variable Name : CarId & Type : Integer
Assign with CurrentItem's CarName (which one is lookup column for Car Name)"
I am unable to assign the new variable to the ItemName. Nor do I get the option of a lookup for integer like shown in the example link.

HT1390 I got a hulu plus, I was able to see tv shows but now is not loading up any. Call hullu but they say is a problem with apple not them can u help. I also try to go to the apple store but is saying that I need iOS 5 to up date, I have the first IPad.

I am having problems with hullu plus, to wach tv shows or any, I call them but they say the problem is with my iPad, bur I used to wach with no problems do you have any suggestion. On wath to do?

Update your iPad to iOS 5.1.1. Connect your iPad to your computer, launch iTunes then click on the Check for Update button.

Show the 3 characters of a characteristic in BEX

Hello,
In Query designer ,I want to create variable which hold characters of 0material_prodhier from 6 to 9.
I want user to select three characters of 0material_prodhier from 6 to 9.
How can I handle it?
With a formula variable?

Hi Arun,thanks for your answer.But can you give more detail in answers
1.How can I use short text?
We want user to enter 3 numbers that is in middle of 6 and 9 characters of 0material_prodhier.
2.I can not create a new characteristic and update rules.Because we can not change the model.We have a very huge data in the infocubes also.
3.How can I create a virtual characteristic and use it
in variable selection screen.
Also I create a new formula variable using 0material_prodhier characteristic.Attribute change with key.And offset start from 0006 ,offset length is 3.
Can I use this variable in the report?

Data aggregation by the 2 first characters of a characteristic

Similar Messages

Maybe you are looking for