Data for PO layout

Hello All
Can some one please help me to put the required values on purchase order print form, my requirement is that I want condition type name, its text and its value i.e rate in % to be printed on output form.
For example condition type is AB01, its name is Rate (%) and value is 10%. i want all these value to be printed in a straight line on PO layout.
Thanks
Anubhav

Apart using table using table to get texts from T685, find the condition record in EKKO table, pass the value to KONV table to find what conditions are applicable line item was, depending upon + or -, add or subtract the value from line item total.. Your abaper can explain you rest of part..

Similar Messages

Web based data entry for BCS layout

Dear Gurus,
Please advice how to enter the data using web layouts into the BCS cube. I know that we cannot simply generate the layouts from BCS workbench like we can do using BPS0 for Business planning transactional cube, but I know that BCS also has this feature available to use web for entering transaction data.
Please advice.
Thanks
Abhinav

Hi Jide,
BCS offers an own fexible upload which you could use for the non SAP companies, without BW ETL
you can create a BCS task for the BCS Monitor where you can load flatfiles.
check: http://help.sap.com/erp2005_ehp_02/helpdata/en/52/6d973bef5cf61de10000000a11402f/frameset.htm
for the SAP companies you can use the "Load from datastream" to load data from a BW Infoprovider:
check: http://help.sap.com/erp2005_ehp_02/helpdata/en/52/6d973bef5cf61de10000000a11402f/frameset.htm
I hope this answer is helpfull for you.

Need to reset page numbers for each layout which has same data

Hi Gurus,
I have an requriement to reset the page number from 1 for each layout in same template.
I know we can do this by @section when we have multiple header_id, but in my case, i have the same data that need to be shown in 3 different layouts under the same template.
So for the first layout it should start with 1 of 2, 2 of 2
Second layout should start with 1 of 2 , 2 of 2
Third layout should start with 1 of 2 , 2 of 2
Any help is highly appreciated.
Thanks,
Edited by: R on May 16, 2013 8:27 AM

Hello Everyone,
Appreciate if any clue about the mentioned requirement.

SEM-BPS how to load additional data for special users at runtime?

Let´s assume you have a transactional info cube which contains SD Data from the source system.
If you want to show additional data, let´s say the attributes of the sold materials which can be read in the table MARA of the source system (provided you use R/3, etc.)
and you only want to show this data for a small amount of users, which need to see it, then i wonder how to do this.
am i right, that i can use the exit functions to init key figures, i.e. i could write some code which connects to the source system over RFC, downloads the data at runtime and presents it at the users excel sheet????
moreover, is it necessary to extend the existing cube, just to achieve this aim?
Message was edited by: Gideon Lenz

Hello Gideon,
there's no need to program anything. You can display any attribute in planning layouts. In your case you would extract the master data from material from SAP R/3 (MARA) into BW. The setup the layout to show the required attribute(s) in the layout in BPS.
If the attribute is relevant only for a specific user group, just give them access to this "special" layout (create a planning folder or web interface for this group).
Regards
Marc
SAP NetWeaver RIG

Entry Date for sales upload

hi all,
i am currently trying to find out if there is a way by which we can find out what was the exact date on which the particular sales was uploaded in the fi. i have checked the gl account balances but am not able to find the option for entry date in the layout.
please suggest alrernate to find the date on which the file was uploaded.
Regards
Arvind Kumar

Hi Arvind,
If you have the billing doc number,
Go to t-code VF03 and display the document.
From the menu --> Go To --> Header --> Header
You can see the "Created on" date.
If you have the FI doc number,
Go to t-code FB03 and display the document.
From the menu --> Go To --> Document Header
You can see the Entry date.
Regards,
Mike

Earliest Start and Earliest Finish dates for Tasks

Hi experts,
Can anybody tell me in what table are the Earliest Start and Earliest Finish dates for tasks located? If no table is available does anyone know of a BAPI o function to obtain these dates?
Thanks and best regards,
Fernando

Hi Wendy!
Thank you so much for your explanation, we have done exactly what you mentioned in your post. In fact we are now using the SCHEDULED_START and SCHEDULED_FINISH instead of the PLANSTART and PLANFINISH.
OK so this is how it went:
In transaction SE11 we added the two fields in our append structure ZDPR_TS_DASHBOARD.
We added them just like they are named:
SCHEDULED_START type DPR_TV_SCHEDULED_START
SCHEDULED_FINISH type DPR_TV_SCHEDULED_FINISH
When doing so, it gave off a warning that SCHEDULED_START and SCHEDULED_FINISH are not customer fields and should have a YY or ZZ in front. I ignored the warning based on your advice and activated the append anyway.
So that´s how the append went.
Next on to the SPRO config:
In the define atributes part, SCHEDULED_START and SCHEDULED_FINISH are already defined as attributes, however I am not sure how the rest of the configurations should go, for example:
Attr.Type, Summarization Rule, Summ. Res, Init Vals., or Reference Attribute.
I left these values standard and didn´t modify anything in this part of SPRO.
Next I checked in the extract layout configuration in SPRO and verified if they were in the 0_Dashboard. It was there alright, but again I am not sure if I should flag any of the two flags in that configuration:
Always Extract and Calculate after Aggr.
I left them blank (standard).
In summary, I didn´t have to do any configuration in SPRO...
I went to the Tasks Dashboard in cProjects and the new columns keep coming with blank values...
What do you think Wendy? Am I still missing something?
Thanks again and regards,
Fernando

Problem to calculate the coherence (using NetworkFunction-VI) with only 1 row of data for each, the stimulus and response input

Hello,
I am trying to calculate the coherence of a stimulus and response
signal using the Network Functions (avg) VI's. The problem is that I
always get a coherence of "1" at all frequencies. This problem is
already known (see KnowledgeBase document: Why is the Network Functions (avg) VI's Coherence Function Output "1"?).
My trouble is that the described solution (-> the stimulus and response input matrices need to have at least two rows to get non-unity coherence values) doesn't help me much, because I only have one array of stimulus data and one array of response values.
Thus, how can I fullfil the 'coherence-criteria' to input at least two rows of data each when I just have one row of data each?
Any hint or idea is very much appreciated. Thanks!
Horst

With this weird board layout, I'm not sure whether you were asking me, but, on the assumption that you were, here goes:
I found no need to use the cross-power spectrum and power spectrum blocks
1... I was looking for speed.
2... I already had the component spectral data there, for other purposes. From that, it's nothing but addition and multiplication.
3... The "easy" VIs, assume a time wave input, as I recall. Which means they would take the same spectrum of the same timewave several times, where I only do it once.
I have attached PNGs of my code.
The PROCESS CHANNEL vi accepts the time wave and:
1... Removes DC value.
2... Integrates (optional, used for certain sensors).
3... Windows (Hanning, etc. - optional)
4... Finds spectrum.
5... Removes spectral mirrors.
6... Scales into Eng. units.
7... From there, you COULD use COMPLEX-TO-POLAR, but I don't care about the phase data, and I need the MAG^2 data anyway, so I rolled my own COMPLEX-TO-MAG code.
The above is done on each channel. The PROCESS DATA vi calls the above with data for each channel. The 1st channel in the list is required to be the reference (stimulus) channel.
After looping over each channel, we have the Sxx, Syy, and Sxy terms. This code contains some averaging and peak-picking stuff that's not relevant.
From there, it's straightforward to ger XFER = Sxy/Sxx and COHERENCE = |Sxy|^2 / (Sxx * Syy)
Note that it uses the MAGNITUDE SQUARED of Sxy. Again, if you use the "easy" stuff, it will do a square-root operation that you just have to reverse - it is obtained faster by the sum of the squares of the real and imag parts.
Hope this helps.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks
Attachments:
ProcessChannel.png ‏25 KB

Data in BPS layout columns

Hi,
   I have two data columns in my BPS layout called price and margin with one lead column material, the layout looks like this when it initially display:
   Material    Price   margin
      1          1.25
      2
      3
      4
The requirments is if user input date in the margin column and the price should be calculated by the following logic
     second material price = (first price ) + (first margin) and so on.
     if we input margin column 0.50,0.40 0.30 for material 1,2,3,4 respectively, we will get the following price result:
    Material    Price   margin
      1          1.25    0.50
      2          1.75    0.40
      3          2.15    0.30
      4          2.45
I am tried to use the excel formula for achieve this, but as much as I know the excel formula can not been saved when we configure the BPS layout,beside since the number of material display under different data selection criteria is vary, it's diffculty to hard code the formula in the excel.
Anybody have any suggestion how to do it?

Hi JW,
BPS is designed in a way that layouts and planning functions are completely independent of each other (otherwise you would have to build a layout for each function or something like that).
The data in the layout is sorted according to the lead column. So if you use FOREACH in FOX with the same characteristic, the data will be processed in the same order as the lead column.
Alternatively, you can do it with an exit function. All you need to do in an exit is copy XTH_DATA into an internal table and then use the SORT statement with the same sort key as the lead column.
DATA:
    lr_aera     TYPE REF TO cl_sem_planarea_attributes,
    lr_t_data   TYPE REF TO data.
FIELD-SYMBOLS:
    <lt_data>   TYPE STANDARD TABLE.
CALL METHOD cl_sem_planarea_attributes=>get_instance
    EXPORTING
      i_area      = i_area
    RECEIVING
      er_instance = lr_area.
CREATE DATA lr_t_data TYPE (lr_area->typename_t_data).
ASSIGN lr_t_data->*   TO <lt_data>.
<lt_data> = xth_data.
sort <lt_data> by ...
your logic here
xth_data = <lt_data>.
Regards,
Marc
SAP NetWeaver RIG

Locking data in BPS layout

Hi Guys,
I have one Planing Layout which different users will access for planning but for different Cost centers. But as of Now when User1 is loggining in it is fetching all Cost Centers and User2 is getting Locked . he is not able to change any plan data .
Now I want that when user1 will logon in BPS Layout ,he/she should fetch up the data for Cost centers for which he/she is authorized . So, other users should not be locked. they should continue to plan for other Cost centers.
your Suggessions will be hIghly Appreciated.
Thanks
Pankaj.

Hi Pankaj,
I suppose you want an input variable for 'User Group' based on which you would write an exit variable for Cost Center. I am a bit out of touch of BPS but as far as I think, you cannot do that because you cannot include a nav. attr. in a planning level. If you can think of some other way other than an input var. for 'User Group' then it might help. One way could be to include 'User Group' as a separate characteristic in the planning level.
In Integrated Planning, this is definitely possible, because in an input ready query, the nav. attr is accessible like any other characteristic on which we are able to apply an input variable.
Maybe somebody else can throw more light on this particular scenario in BPS.

To Identify changed data in planning layout in BPS

We have a planning layout in BPS which user can change data on individual cell. We also have an EXIT function to distribute data to this layout.
User changes data on cells then executes the EXIT function to distribute data. During debugging, we see the changed entry with delta amount in the XTH_DATA table. However, there are many entries with similar characteristics; hence we cannot identify the particular changed data, i.e., the changed sales amount, in XTH_DATA of EXIT function.
Is there any configuration and/or function to show only the changes data? Any comments/hints are greatly appreciated.
Best regards,
Sam

Hi,
When you enter for a particular characteristic and remaining characteristic if you left bank , it will store as # in layout and samething will also in cube. you can check it cube also.
for eg.
profitcenter com.code sales revenue
100 # 10
if you want to avoid this then you have to enter all characteristic values.
Regards,
Siva.

Creation of master data thru planning layout

Hi SEM gurus,
We have a text characteristic in the lead column of a layout. Is it possible that if I enter some values for that characteristic at run time and the values is automatically stored as master data?
Thanks in advance!
-SK

Hi ,
No its not possible to do that on Run time.since master data validation happens every time you save the data from the layou.Assuming that you have an excel layout and you are having ,say Material code in the lead column.If you want to create a new Material code and plan for the same,you should be able to do planning for a new Material code .But you cannot save it into the master data.For doing this you can use the function modules present in the Group RSNDRI_MD. there you can find functions to Update master data ,update texts and also delete the Master on the run.you can do the Master data change by calling one of the update master data functions using an exit type function in BPS.
hope this is of some help.
regards
Sai VIshnubhatla.

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost".

I have had my IPAD2 for quite a while but haven't activated my cellular data for about a year. I am now trying to activate and when I go to cellular data, turn it on and try to tap view account i just get a message that says "connection to server lost". I could swear the last time I used cellular data you would see the signal in the upper left corner and I only see "no service" there, I am in a location where I know I should have service. Is there something I should do to my IPAD? I tried resetting, I tried clearing cookies and history in Safari (after reading a post n these discussions). I don't know what to do next. My IOS version is 6.1.3. I did go into Network from the general tab and I see it says "SIM not provisioned". HELP and Thank you in advance.

Hello Theresa818,
Thank you for using Apple Support Communities!
It sounds like the cellular data will not activate for some reason on the iPad.
I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
Check for a carrier settings update.
Update your iPad.
Toggle the Cellular Data setting off and on under Settings > Cellular Data.
Restart your iPad.
Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPad as new.
If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
I know you may have done one or two of the steps here, so you can skip those.
Take care,
Sterling

"use cellular data for" apps keep turning back on

ie. go in, slide bar from green to off for facetime, youtube, etc...go out of Cellular, back in, and those apps show green for "use cellular data for".
At first I thought it was an issue with some versions of Angry Birds, as they don't all do this. Then realized facetime, youtube, facebook, etc.. all do this.
Works fine on two other iphones. Running latest ios on 4S
The fact it doesn't do it for all apps is what I find is strange. Thought at first it was an issue with Rovio apps, but then realized even facetime does this.
Thanks

I'd like to know why there is not solution to this. I think I'll just remove all those apps that are turning their 'use cellular' data back on. I only cared because when my kid plays angry birds, my cellular data was being used for videos. Oh well, I guess I'll have to remove apps or get a new data plan.
<Edited by Host>

Have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

have family plan with 250 data which I almost use each month. Going on vacation and will be on the road for two weeks. Should I up my data for a month then change back. Is it worth it or should I just run over and pay the extra 15 per gig?

Hello mlazaretti. Vacation time is awesome. (Especially a road trip!) Since you will be going out for two weeks, you never know if having extra data may come in handy. I highly recommend switching to the next tier up so this way you have more data. This way it is only $10.00 more versus $15.00, and you dont have to worry about overages. Then change back at the start of the next billing cycle.
If you need help making this change let us know! Have a safe trip!
NicandroN_VZW
Follow us on twitter @VZWSupport

Can we load data for all levels in ASO?

Hi All,
Im creating cube in ASO
can i load data for all levels in ASO
we can load data for all Levels In BSO but in ASO i need confirmation????
and one more
wat is the consider all levels option in ASO is used for ? wat is the purpose?
Can any one help ,it would be appriciate.
Thanks

In an ASO cube you can only load to level zero
The consider all levels if used for aggregation hints. It allows you to tell the aggregation optimizer to look at all levels when deciding if aggregation needs to be done on the dimension

Data for PO layout

Similar Messages

Maybe you are looking for