Data Grid - Complete List with no Vertical Scroll
Hi Guys,
I have a datagrid. The height and width are set to 100%. The data grid is inside an Advanced datagrid which is also set to height and width of 100%.
When each row of the advanced data grid is expanded, the data grid is displayed. It displays with a scroll bar. I want to display all the entries with no scroll. How is this achieved. Please post your comments.
Regards,
Mahee
html {overflow: scroll;}
or
.active-scroll-bars {overflow-y: hidden};
are both viable says
you can also
body {
overflow-y: hidden;
however, you must understand that this might not show up the exact same in I.E. or FF...there's other work arounds with CSS, etc. but they might also cause a lapse issue.
in order to fix your cause, I would just assume you give your datagrids absolute positioning, and, w/h ratio size...
good luck
Similar Messages
-
Help with a vertical scroll bar issue with a List component
hi. i have a basic <s:list> that uses an XMLListCollection as it's data provider and a very basic itemrenderer. when a row in the list is clicked a function gets the list.selectedIndex then populates some text fields with more xml data. that all works fine.. the problem i have is that the vertical scroll bar on the list seems to be "clickable" - just like a row in the list. the scroll bar scrolls normally but when it's clicked the selectedIndex becomes -1 which is not helpful b/c the value -1 is passed to the XMLListCollection.
any ideas? cheers.thanks but still problematic...surely the <s:List> component shouldn't return a value when the scrollbar thumb is clicked? i created a very basic list (see below) and made the list dimensions short enough so that there is a vertical scrollbar and found that when the scrollbar thumb is clicked the trace(event.currentTarget.selectedIndex) returns a number. that's annoying b/c i just want a selectedIndex value for a row that is clicked not the scrollbar.
any ideas to get around? cheers
<fx:Script>
<![CDATA[
protected function list1_clickHandler(event:MouseEvent):void
trace(event.currentTarget.selectedIndex);
]]>
</fx:Script>
<s:List x="162" click="list1_clickHandler(event)" y="276" labelField="@label" width="144" height="153">
<s:dataProvider>
<s:XMLListCollection>
<fx:XMLList xmlns="">
<node label="one"/>
<node label="two"/>
<node label="three"/>
<node label="four"/>
<node label="five"/>
<node label="six"/>
<node label="seven"/>
<node label="eight"/>
<node label="nine"/>
<node label="ten"/>
<node label="eleven"/>
</fx:XMLList>
</s:XMLListCollection>
</s:dataProvider>
</s:List> -
BDC: How to enter data in Table control (With wizard) using scrolling?
Using BDC, I am trying to enter the data in the table control (with wizard).
I want to know what is the specific command to scroll down in table control (With Wizard).
While recording I am getting these steps:
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
When I use above command and run BDC, it does not scroll.
Kindly let me know where am I going wrong.
Thanks in advance for your kind help.
AshishThe transaction is CK94
and the BDC recording is :
T CK94
SAPLCKBASCR1 0200 X
BDC_CURSOR CKI94A-BDATJ
BDC_OKCODE =ENTR
CKI94A-MATNR 10000789
CKI94A-WERKS VA79
CKI94A-BDATJ 2005
CKI94A-MGTYP ZDU01
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MISCH_VERH(02)
BDC_OKCODE /00
CKI94B-MIXCOST_PC(01)
CKI94B-MIXCOST_PC(02) X
CKI94B-MISCH_VERH(01)
CKI94B-MISCH_VERH(02) 40
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MISCH_VERH(07)
BDC_OKCODE /00
CKI94B-MIXCOST_PC(07)
CKI94B-MISCH_VERH(07) 60
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE /00
SAPLCKBASCR1 0202 X
BDC_CURSOR CKI94B-MATNR
BDC_OKCODE =STOR
BDC_OKCODE '/00' is recorded when I scroll down in the table control.
Thanks for your kind concern.
Ashish -
Hi
I am facing an issue with my datagrid with renderers on all its columns.I need to enable or disable the render components based on values in different columns in the row.Its works fine in most of the places .But in some places which is not visible without the scroll,it seems the set data function is not called,because of which the component will be enabled when it has to be disabled.How do i ensure it works fine all the time.
Regards
SiddThe set data is probably being called. Keep in mind that renderers are recycled so the enabled/disabled state must be fully derived from the row's data.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
Issues with Timeline vertical scroll adjustment
Hello,
My timeline has just gone wiggy. The video upper half of the timeline has no vertical slider, unlike the audio slider below. FCP was functioning fine and suddenly adopted this issue. The video part of the timeline, will continue to rotate around the tracks that are in place with out stopping. If i change the size of the timeline screen it will reset. If I attempt to scroll on the video side of the timeline it just continually rolls the video timeline around - as though the tracks are infinite v1- v?. Any fixes are appreciated.
Thanks,
EdYes you must.
Jon Chappell has written a nifty little app that allows you to back up the prefs to a safe place then to trash the ones in FCP. You can then selectively restore those user settings that might be useful.
http://www.digitalrebellion.com/pref_man.htm
x -
How To Populate An Advanced Data Grid In Flex With An XML Document Created In JAVA
Flex Code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Module xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="856" height="698" initialize="onInitData()">
<mx:RemoteObject destination="utilityUCFlexRO" id="utilityUCFlexRO">
<mx:method name="updateStationDetails" result="handleUpdateStationDetailsResult(event)" fault="handleUpdateStationDetailsFault(event)"/>
</mx:RemoteObject>
<mx:RemoteObject id="uniqueIdMasterUCFlexRO" destination="uniqueIdMasterUCFlexRO">
<mx:method name="readByCustomerName" result="handleReadByCustomerNameResult(event)" fault="handleReadByCustomerNameFault(event)"/>
<mx:method name="getCustomerAcDetails" result="handlegetCustomerAcDetailsResult(event)" fault="handlegetCustomerAcDetailsFault(event)"/>
</mx:RemoteObject>
<mx:Script>
<![CDATA[
import mx.events.ListEvent;
import mx.collections.ItemResponder;
import com.citizen.cbs.model.UniqueIdMaster;
import mx.managers.PopUpManager;
import mx.controls.ProgressBarMode;
import mx.effects.Fade;
import mx.controls.ProgressBar;
import com.citizen.cbs.CitizenApplication;
import mx.core.Application;
import mx.messaging.messages.ErrorMessage;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.collections.ArrayCollection;
import mx.controls.Alert;
private var moduleCloseFlag:Boolean=false;
private var v:UniqueIdMaster;
[Bindable]
private var customerDetails:ArrayCollection;
[Bindable]
private var branch:int=0;
[Bindable]
private var XMLDocument:XML;
[Bindable]
private var acDetails:XMLList;
private var _progBar:ProgressBar = new ProgressBar();
private function showLoading(e:Event = null):void
_progBar.width = 200;
_progBar.indeterminate = true;
_progBar.labelPlacement = 'center';
_progBar.setStyle("removedEffect", Fade);
_progBar.setStyle("addedEffect", Fade);
_progBar.setStyle("color", 0xFFFFFF);
_progBar.setStyle("borderColor", 0x000000);
_progBar.setStyle("barColor", 0x6699cc);
_progBar.label = "Please wait.......";
_progBar.mode = ProgressBarMode.MANUAL;
PopUpManager.addPopUp(_progBar,this,true);
PopUpManager.centerPopUp(_progBar);
_progBar.setProgress(0, 0);
private function onInitData():void
utilityUCFlexRO.updateStationDetails(CitizenApplication.menuParameters["modulecode"]);
private function handleUpdateStationDetailsResult(event:ResultEvent):void
if(moduleCloseFlag==true)
Application.application.unloadModule();
private function handleUpdateStationDetailsFault(event:FaultEvent):void
var errorMessage:ErrorMessage = event.message as ErrorMessage;
Alert.show(errorMessage.rootCause.message);
private function onSearch():void
if(txtName.text=="" || txtName.text==null)
Alert.show("Enter a name for search");
return;
if((txtName.text).length < 4)
Alert.show("Search should contain more than 3 alphabets");
return;
var d:String = txtName.text;
branch = CitizenApplication.initInfo.registeredUser.branchDetails.bdBranchNo;
uniqueIdMasterUCFlexRO.readByCustomerName(d,branch);
showLoading();
private function handleReadByCustomerNameResult(event:ResultEvent):void //In handle if record does not exists, dsiplays error message and resets the field
customerDetails =ArrayCollection(event.result);
PopUpManager.removePopUp(_progBar);
if(customerDetails.length==0)
Alert.show("Record Not Found, Enter Proper Name ");
onReset();
private function handleReadByCustomerNameFault(event:FaultEvent):void
Alert.show(event.fault.faultDetail + " -- " + event.fault.faultString + "handleReadByCustomerNameFault");
private function onReset():void
customerDetails=new ArrayCollection();
txtName.text="";
private function onCancel():void
utilityUCFlexRO.updateStationDetails("MM0001");
moduleCloseFlag=true;
private function btnBackClick():void
view1.selectedIndex=0;
private function btnBackClick1():void
view1.selectedIndex=1;
private function onItemClick( e:ListEvent ):void
if(dgCustDetails.selectedItem == null)
Alert.show("Select Proper Record");
else
lblId.text = e.itemRenderer.data.uimCustomerId;
lblName.text = e.itemRenderer.data.uimCustomerName;
var custId:int = Number(lblId.text);
uniqueIdMasterUCFlexRO.getCustomerAcDetails(custId,branch);
showLoading();
private function handlegetCustomerAcDetailsResult(event:ResultEvent):void
//XMLDocument = event.result as XML;
acDetails = new XMLList(event.result.menu);
//Alert.show("Name: "+event.result.@name);
PopUpManager.removePopUp(_progBar);
view1.selectedIndex=1;
//adg1.dataProvider=acDetails;
private function handlegetCustomerAcDetailsFault(event:FaultEvent):void
PopUpManager.removePopUp(_progBar);
Alert.show(event.fault.faultDetail + " -- " + event.fault.faultString + "handlegetCustomerAcDetailsFault");
]]>
</mx:Script>
<mx:ViewStack height="688" width="856" id="view1">
<mx:Canvas>
<mx:Panel x="51" y="25" width="754" height="550" layout="absolute" title="Customer Search Page">
<mx:HBox x="174" y="26" horizontalAlign="center" verticalAlign="middle">
<mx:Label text="Enter Name:"/>
<mx:TextInput id="txtName" width="228"/>
<mx:LinkButton label="Search" click="onSearch()"/>
</mx:HBox>
<mx:Label text="--" id="lblId" x="40" y="194"/>
<mx:Label text="--" id="lblName" x="40" y="226"/>
<mx:DataGrid dataProvider="{customerDetails}" id="dgCustDetails" allowMultipleSelection="false" editable="false"
showHeaders="true" draggableColumns="false" width="718" height="373" itemClick="onItemClick(event);" x="10" y="61">
<mx:columns>
<mx:DataGridColumn headerText="Customer Id" dataField="uimCustomerId" width="150"/>
<mx:DataGridColumn headerText="Customer Name" dataField="uimCustomerName"/>
</mx:columns>
</mx:DataGrid>
<mx:ControlBar>
<mx:Button label="CANCEL" click="onCancel()" width="80"/>
<mx:Button label="RESET" click="onReset()" width="80"/>
</mx:ControlBar>
</mx:Panel>
</mx:Canvas>
<mx:Canvas>
<mx:TitleWindow x="10" y="10" width="836" height="421" layout="absolute">
<mx:AdvancedDataGrid x="6.5" y="10" id="adg1" designViewDataType="tree" variableRowHeight="true" width="807" height="278" fontSize="14">
<mx:dataProvider>
<mx:HierarchicalData source="{acDetails}"/>
</mx:dataProvider>
<mx:groupedColumns>
<mx:AdvancedDataGridColumn headerText="Type Of A/c" dataField="@Name" width="150"/>
<mx:AdvancedDataGridColumn headerText="Details Of A/c"/>
</mx:groupedColumns>
<mx:rendererProviders>
<mx:AdvancedDataGridRendererProvider id="adgpr1" depth="2" columnIndex="1" renderer="AcDetails1" columnSpan="0"/>
</mx:rendererProviders>
</mx:AdvancedDataGrid>
<mx:ControlBar height="56" y="335">
<mx:Button label="BACK" width="80" click="btnBackClick()"/>
<mx:Spacer width="100%"/>
<mx:Button label="EXIT" click="onCancel()" width="80"/>
</mx:ControlBar>
</mx:TitleWindow>
</mx:Canvas>
</mx:ViewStack>
</mx:Module>
XML File Generated In JAVA:
<?xml version="1.0" encoding="UTF-8"?>
<menu>
<AcType Name="Savings">
<SavingAcDetails AcName="Mr. MELROY BENT" AccountNo="4" ClearBalance="744.18" ProductID="SB" TotalBalance="744.18">
<SavingMoreAcDetails AcStatus="OPERATIVE" AcType="NORMAL" FreezeCode="No Freeze" ModeOfOper="AnyOne Single Or Survivor"/>
</SavingAcDetails>
</AcType>
<AcType Name="TermDeposit">
<TDAcDetails AcName="Mr. BENT MELROY" AccountNo="1731" ProductID="TD">
<TDMoreAcDetails AcStatus="OPERATIVE" AcType="NORMAL" FreezeCode="No Freeze" ModeOfOper="Either or Survivor"/>
</TDAcDetails>
<TDAcDetails AcName="Mr. BENT MELROY" AccountNo="2287" ProductID="TD">
<TDMoreAcDetails AcStatus="NEW" AcType="NORMAL" FreezeCode="No Freeze" ModeOfOper="Self"/>
</TDAcDetails>
<TDAcDetails AcName="Mr. BENT MELROY" AccountNo="78" ProductID="TD">
<TDMoreAcDetails AcStatus="OPERATIVE" AcType="NORMAL" FreezeCode="No Freeze" ModeOfOper="Self"/>
</TDAcDetails>
</AcType>
</menu>
Tried Alot Of Examples Online But In Vain....
Need Help....
Thanks In Advance....Please help me !!!! I have been stuck up with this issue for the past two days and I need to atleast figure out if this is possible or not in the first place.
-
Horizontal scrolling with a vertical scroll wheel
Recently I sadly had to ditch my mighty mouse. Good by little friend.
I couldn't justify spending 45 minutes of my day trying to clean the wheel.
I miss horizontal scrolling now. I've been told that one can get horizontal scrolling by holding the shift key, but that doesn't work for me.
Any ideas?My apple mouse that came with my iMac G5 started sticking which was causing problems when I tried to double-click. I bought a Logitech Optical Mouse which works fine on my iMac even if it was intended to be used with a PC. I can even right-click to bring up the options you would get by ccontrol-click an apple mouse. Also the Logitech mouse is cheap compared with an apple mouse.
http://www.amazon.com/gp/product/B0001LTT64/ref=dpcp_ob_title0/104-2556526-6719156 -
Send data as work list with the link to enter in to approval screen.
Hi Experts,
In my application, on submission of data by a user, another user should get a link for approval screen in which the entered data is passed.
How to achieve this workflow??
Regards
NikhilHi Nikhil,
You need to develop an application for your requirements. First designe a table in the back end for the required information, then later, when one user add the data into the form or IView , you need to store the user Id into the database in order to process and validate it.
When the second user or superior as your requirement comes and open the IView , it will validate user and display either approve sheet or fresh sheet .
depends on your requirement.
points if useful
thanks
Suresh -
FYI: Confirmed flaw with Outlook Auto-Complete lists w/Exchange Online
Ever since our organization migrated to Exchange Online we noticed a flaw with how Outlook's Auto Complete list (nickname cache) operates. We've finally gotten a confirmation from Microsoft that the following is indeed a problem:
Each entry in a user's local Outlook auto-complete cache is represented by an LDAP distinguished name.
When Exchange is hosted on-premises these entries pretty much never change.
When your organization is hosted on Exchange Online, the distinguished names for your mailboxes can change without notice due to maintenance processes (Microsoft's engineers have confirmed this to be true).
There are other ways that a mailbox's distinguished name can change (re-creating a mailbox, etc.)
Outlook's local auto-complete cache has no way (currently) to reconcile changes should any of its entries' distinguished names change in the cloud.
When the entries in the local auto-complete cache become "stale" the following may happen:
Emails to affected recipients can bounce back.
Emails to distribution groups containing members which have stale auto-complete entries can bounce back.
On occasion no NDR is even generated (BIG PROBLEM).
As noted above, we've gotten Microsoft to admit that this is indeed a problem with Outlook when combined with Exchange Online. I was told that the Outlook product team has been notified of this problem. However, in order to escalate this issue I was
asked to spread the word to other customers so they can also chime in if they've been affected.
Please supply your feedback to Microsoft and ask that Outlook be enhanced to either reconcile the local auto-complete list with the online GAL, or provide some sort of notification to the user that an auto-complete entry has become "stale" or invalid.
Thanks for everyone's time!Hi,
There is nothing called as Outlook's local nick-name cache. This resides on the mailbox and not outlook and supports only 1000 entries only. If the entries exceeds 1000 it will not function correctly.
After the .nk2 file has been imported into your mailbox, Outlook writes a value into a hidden message in your mailbox.
To locate this property in MFCMAPI, open the
Associated Contents table of the Contacts folder. Then, select the message with
Subject = IPM.Configuration.ContactPrefs.
Then, double-click the PR_ROAMING_DICTIONARY property to see the configuration setting nickname cache import. The value to examine is
pImportedContactNickNames (True = the import has already occurred).
Since you are facing issues at this point of time, it needs to be corrected. I would appreciate if you can open phone support case with O 365 team and ask them to escalate to Exchange Level , we should be able to work with
you and correct the issue
Hope this helps
Thanks -
Vertical Scroll in Dynpro Table Control
Hello,
I am currently having an issue with the vertical scroll control in my classic dynpro table. When I scroll down it will scroll past the first record and then freeze. I cannot scroll back up to the first record. If I try to scroll down it jumps many records and then will not let me scroll back. I have compared the coding from this screen to one that works and cannot find any differences. Is there somewhere else I should be looking? Has anyone else experienced this issue?
Thanks,
JeremeCheck out this example program.
REPORT demo_dynpro_tabcont_loop.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn,
fill TYPE i.
TABLES demo_conn.
DATA: lines TYPE i,
limit TYPE i.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES fill.
flights-lines = fill.
ENDMODULE.
MODULE fill_table_control OUTPUT.
READ TABLE itab INTO demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
lines = sy-loopc.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'NEXT_LINE'.
flights-top_line = flights-top_line + 1.
limit = fill - lines + 1.
IF flights-top_line > limit.
flights-top_line = limit.
ENDIF.
WHEN 'PREV_LINE'.
flights-top_line = flights-top_line - 1.
IF flights-top_line < 0.
flights-top_line = 0.
ENDIF.
WHEN 'NEXT_PAGE'.
flights-top_line = flights-top_line + lines.
limit = fill - lines + 1.
IF flights-top_line > limit.
flights-top_line = limit.
ENDIF.
WHEN 'PREV_PAGE'.
flights-top_line = flights-top_line - lines.
IF flights-top_line < 0.
flights-top_line = 0.
ENDIF.
WHEN 'LAST_PAGE'.
flights-top_line = fill - lines + 1.
WHEN 'FIRST_PAGE'.
flights-top_line = 0.
ENDCASE.
ENDMODULE.
It has the following flow logic:
PROCESS BEFORE OUTPUT.
MODULE status_0100.
LOOP WITH CONTROL flights.
MODULE fill_table_control.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
LOOP WITH CONTROL flights.
MODULE read_table_control.
ENDLOOP.
MODULE user_command_0100.
Regards,
Midhun Abraham
Edited by: Midhun Abraham on Oct 2, 2008 5:23 AM -
Freeze column headers in a table and enable vertical scroll bar on the rows
I have seen demos of BI Publisher running an html view of a report that displays a table of data with a vertical scroll bar on the table. The table header is always visible as you scroll down on the rows of the table. Any idea how this is achievable?
Hi,
Have you find a way to do this? Im looking for the exact same thing!
Where did you see this demo?
Br
Magnus -
Hi!
I need a custom data grid, explaining:
I need to made custom list of specific files, in the System data grid I can use the drag and drop files to desktop, but how I made the drag and drop work in the custom data grid of list of files?
I tried to show in the data grid the path of the file, and drag this, but the error is:
"Data for file list format must be an array of Files"
But, how I made a "array of files"?
Sorry to my bad english =)
Thanks a lot! =)Hello chhavs,
If you listen to the DataGrid's headerRelease event, the event has a property columnIndex to let you know which column the user wanted to sort. So you don't need 10 functions, just one with a switch statement, which is reasonable.
private function handleHeaderRelease(event:DataGridEvent):void
var sort:Sort = new Sort();
var field:SortField;
switch (event.columnIndex)
case 0:
field = new SortField("fieldA");
break;
case 1:
field = new SortField("fieldB");
break;
case ...
sort.fields = [field];
masterRecords.sort = sort;
masterRecords.refresh();
Thanks,
Philip -
How to set the data in af:selectOrderShuttle with reorderOnly "true"
I created codes like below, but after the page is loaded, there is not any data in the list. even I added a String array(employeeMB.columns) with some value in the managed bean, nothing did I get. How can I set the initial data in the list with reorderOnly set to "true"? I am using JDeveloper 11.1.1.2.0. Thanks.
+<af:selectOrderShuttle value="#{employeeMB.columns}"+
reorderOnly="true" id="colsMonitor">
+<af:selectItem label="Empno" value="Empno"/>+
+<af:selectItem label="Name" value="Ename"/>+
+<af:selectItem label="Job" value="Job"/>+
+<af:selectItem label="Department" value="Deptno"/>+
+<af:selectItem label="Hiredate" value="Hiredate"/>+
+<af:selectItem label="Salary" value="Sal"/>+
+<af:selectItem label="Commission" value="Comm"/>+
+<af:selectItem label="Manager" value="Mgr"/>+
+</af:selectOrderShuttle>+Hi,
A helpful thread for you:----
Dynamically Change Data Provider in Anaylsis Grid in Bex Workbook 7.0
Regards,
Suman -
Data Grid wilth Multiple ArrayCollections
I am using an array collection to store a month name and a
list of the monthly sales for a list of people, which are in their
own array collection. Adding an item to the array collection looks
something like this:
myCollection.add({month:"January",salesArray:someArrayCollection});
Where someArrayCollection has the January sales for a number
of people. The point of setting it up this way is that the size of
the embedded array collection (the number of people to display)
changes depending on what geography the user selected. Simply
binding this to a data grid leaves me with two columns, one listing
the months, and the other listing all the people's sales for that
month separated by commas within the grid tile. How can I break
these out into separate columns?
I know that you can list out the DataGridColumns within a
DataGrid and specify which field the column refers to. I'm trying
to find a way to set the dataField attribute to a particular item
within the embedded array. I would think that the code would be:
dataField="salesArray.getItemAt(0)"
to return the first person's sales in it's own column, but
this doesn't work. Any advice would be greatly appreciated.Hi GWD and thanks for responding.
I fully understood your explanations and the example you
provided.
I'll give it a try, for sure.
But I want to know:
- How do I populate a DataGrid Component? Like a List
Component? (you said they are quite the same, I assume methods to
apply are identical...)
-In the same way, I can pull out the data from a DataGrid as
I do for the List, right?
Thanks again!
Best,
gerry -
I need help with my data grid control. It doesn't display any
data when it gets data. It is getting data in this format:
<images>
<image><image_name></image_name><image_url><image_url><keywords></keywords></image>
</images>
and the component is this:
<mx:DataGrid x="10" y="10" width="640" height="140"
dataProvider="{imageReturn.lastResult.images}"
id="communityImages">
<mx:columns>
<mx:DataGridColumn headerText="Image"
dataField="{image.image_url}">
</mx:DataGridColumn>
<mx:DataGridColumn headerText="Name"
dataField="{image.image_name}"/>
<mx:DataGridColumn headerText="Keywords"
dataField="{image.keywords}" visible="false" />
</mx:columns>
</mx:DataGrid>
What's Wrong? Help Please!yea while i was working with VB , i was using data grids that lists the records those came from the access database.
i'm using an access database again ,but with java codes i wanna do listing. im not making an applet, but a self GUI application, and dont know how to list the records. because in applets there's paint() method.in such an example of mine there's not.
what can i do? if there is no data grid or something alike in java for self GUI applications, how can i list them as a whole in a frame?
thanks
Maybe you are looking for
-
IPod mini seen on desktop, not in iTunes
The iPod is fully charged, I have reset it about 4 times, I've restarted my computer, and I've done everything else detailed here: https://discussions.apple.com/thread/695939?start=0&tstart=0 (though one of the messages is for a Windows computer) I a
-
I cannot see last year's appointments in ical on iPad
I needed to access last year's (2012) appointments in order to make my annual report. I could see them on my iMac, but not on the iPad even though when I got the iPad I successfully transferred all those from iCloud. How can I get those old appointme
-
Security Vulnerabilities on OAS 10.1.2.3
Hello, I installed the latest security patch 10031947 on my server (Infra & Midtier), and after a new security scan I'm still receiving the following vulnerabilities: However, the patches did not resolve the following vulnerabilities and they still e
-
Hi All, I have to use attachment functionality for Items ( In PIM module). Reason for using attachment is because Attributes can store only upto 1000 characters. I am getting the text as input (VARCHAR2(4000) ) > I would like to populate this data as
-
HT5628 how to install mac os x lion on ipad 4?
How do I install Mac OS X Mountain Lion on my Ipad 4 without Jailbreak??????