Data Input on Distribution of Mirror Transactions

Hello Guys,
I need to realize a lot of data inputs for customizing of Distribution of Mirror Transactions on TRM module.
Do exists some view or another method for mass data input? I mean, Is it possible to do?
Thanks a lot.
Best Regards,
Rodrigo Soares

Hello Mahesh,
Thanks for your feedback. I tried a LSMW, but it wasn't possible because we don't have a transaction for direct access, only access through the SPRO transaction.
Thanks a lot.
Best Regards,
Rodrigo Soares

Similar Messages

Massive data input for employees Transaction

Hi experts!
I need to perform a massive data input for employees. Iu2018ve tried with de Tx PA71 u2013 Fast entry of Time Data - but It needs a document or a manual preselecting.
Its necessary selecting ranges of personnel number in order to perform a massive data input for employees as a salary benefit or bonus for a group of employees.
Do you know that kind of transaction?
Thanks in advanced!

Hi ,
You could also use T Code : SCAT/SCEM for mass upload or deload.
You may use below method to create SCAT in ECC (This is not a Direct method)
1) Run transaction SCEM
2) Enter a CATT name
3) Click on change, prompt appears saying it doesn't exist, do you want to
create. Click yes.
4) Enter the TCODE to record.
5) Execute the TCODE and save data.
6) Back out. Click End and copy button.
7) Double-click the TCD on the left side of screen
8) Click F5 or Field Inputs Variants
9) Use black down-arrow to step through screens.
10) Double click on fields to set variables. (SAP adds leading & to each
variable name).
11) Save and back out.
12) Go to menu path Environment --> Extended CATT.
13) Click change and change type from (M) Manual Test Case to (C) CATT.
14) Assign component.
15) Click save. Back out.
16) Execute SCAT and Go to --> Variants --> Export Default and save as text
file.
17) Edit file with new test data.
18) Execute CATT.
After step 6 you can also leave SCEM and run SCAT and perform the
parameterization there as usual.
Hope this helps.
Inputs for Neeraj.

In Bdc I have huge volume of data to upload for the given transaction

Hi gurus,
In Bdc I have huge volume of data to upload for the given transaction, here am using session method, it takes lots of exection time to complete the whole transaction, Is there any other method to process the huge volume with minimum time,
reward awaiting
with regards
Thambe

Selection of BDC Method depends on the type of the requirement you have. But you can decide which one will suite requirement basing the difference between the two methods. The following are the differences between Session & Call Transaction.
Session method.
1) synchronous processing.
2) can tranfer large amount of data.
3) processing is slower.
4) error log is created
5) data is not updated until session is processed.
Call transaction.
1) asynchronous processing
2) can transfer small amount of data
3) processing is faster.
4) errors need to be handled explicitly
5) data is updated automatically
Batch Data Communication (BDC) is the oldest batch interfacing technique that SAP provided since the early versions of R/3. BDC is not a typical integration tool, in the sense that, it can be only be used for uploading data into R/3 and so it is
not bi-directional.
BDC works on the principle of simulating user input for transactional screen, via an ABAP program.
Typically the input comes in the form of a flat file. The ABAP program reads this file and formats the input data screen by screen into an internal table (BDCDATA). The transaction is then started using this internal table as the input and executed in the background.
In Call Transaction, the transactions are triggered at the time of processing itself and so the ABAP program must do the error handling. It can also be used for real-time interfaces and custom error handling & logging features. Whereas in
Batch Input Sessions, the ABAP program creates a session with all the transactional data, and this session can be viewed, scheduled and processed (using Transaction SM35) at a later time. The latter technique has a built-in error processing mechanism too.
Batch Input (BI) programs still use the classical BDC approach but doesnt require an ABAP program to be written to format the BDCDATA. The user has to format the data using predefined structures and store it in a flat file. The BI program then reads this and invokes the transaction mentioned in the header record of the file.
Direct Input (DI) programs work exactly similar to BI programs. But the only difference is, instead of processing screens they validate fields and directly load the data into tables using standard function modules. For this reason, DI programs are much faster (RMDATIND - Material Master DI program works at least 5 times faster) than the BDC counterpart and so ideally suited for loading large volume data. DI programs are not available for all application areas.
synchronous & Asynchronous updating:
http://www.icesoft.com/developer_guides/icefaces/htmlguide/devguide/keyConcepts4.html
synchronous & Asynchronous processings
Asynchronous refers to processes that do not depend on each other's outcome, and can therefore occur on different threads simultaneously. The opposite is synchronous. Synchronous processes wait for one to complete before the next begins. For those Group Policy settings for which both types of processes are available as options, you choose between the faster asynchronous or the safer, more predictable synchronous processing.
By default, the processing of Group Policy is synchronous. Computer policy is completed before the CTRLALTDEL dialog box is presented, and user policy is completed before the shell is active and available for the user to interact with it.
Note
You can change this default behavior by using a policy setting for each so that processing is asynchronous. This is not recommended unless there are compelling performance reasons. To provide the most reliable operation, leave the processing as synchronous.

Mirror Transaction in Product type

Hi All,
We have been configuring Mirror Transactions for product type 62B.
for transaction 304. (Fix to Fix).
However we get no error message and no mirror deals are created even when the deal is created or settled.
Maintain Relevant Product Types and Transaction Types
1000
62B
304
01
20/30
2000
Map Product Types and Transaction Types
2000
62B
304
TEST
+ Incoming 01 Mirror Image
1000
62B
304
TEST
- Outgoing
01 Mirror Image
Process Incoming Data
2000
62B
304
01
20/30
1000
01
01 Mirror Image
Company codes are correctly mapped to Partners.
Still we do not get the Mirror deal created.
We checked the Class: CL_IM_FTR_TR_MIRROR_DEALS in which FTR_MIR_BAPI_CREATE is used to create deals.
In the class I dont find any condition for product category 620 - SWAP.
Your guidance is appreciated.

Hi Subhrajit,
mirror deals functionality is available for the following financial instruments: fixed-term deposit, deposit at notice, cash flow transaction, interest rate instrument, foreign exchange, and foreign exchange swap -> see a Section 'Features' @ Mirror Transactions - Product Types in the Transaction Manager - SAP Library, so I'm afraid 62B is simply is not within the scope of Mirroring functionality.
hope this will help you.
Kind regards,
Renatas

Automated data load from APO to SEM transactional cube

Hi ,
We have BW-SEM system integrated with APO system.
I could see automated data loads from APO to SEM transactional cube ..
Infopackage name as "Request loaded using the APO interface without monitor log" ..
I don't see any infopackage by this name in both the systems ( APO & SEM )..
I am not sure how it configured ..
Appreciate any inputs on how its happens .....
Thanks in advance

Hi,
As I mentioned the starting point will be the tcode BPS0. There will be 2 planning areas created (if I am correct) one for SEM cube and the other for APO cube. The better way to find it will be goto tcode se16 and enter UPC_BW_AREA and key in the cube names in the cube field. this will give you the planning area names now look for a multiplanning area which has the 2 areas included in them (this is available in table UPC_AREAM).
then goto BPS0 and you will have to find which function is being used to post the data.
thanks

Adding Data to the database for SAP Transactions

Hi
I'm new to the whole ABAP. I would like to enquire about adding transaction data in SAP through ABAP but it must be immediate.
I know that one can use a BAPI to add data and can rollback if any problems occur.
But if no BAPI exists how does one write code to add a document to the SAP database but with everything SAP transaction requires like the BAPI. What is the process and how???
So let say I wanted to do FB01 which is SAP FI document and must be immediate. There is a BAPI that exists for it but if there was not one how would I do this???
I know one can also use BDC but that creates a batch and then needs to be executed in SM35, I want a way to add data for two or three SAP transactions, if any problems occur with any of the steps rollback everything else commit everything to the database.
Any simple detail examples (code) that satisfy the above will be greatly appreciated and REWARDED.
Thanks in advance

Luis,
i have a code exactly same BDC for FB01.
refer:
REPORT z_etching_fb01
 NO STANDARD PAGE HEADING LINE-SIZE 255.
*etching invoice load
INCLUDE bdcrecx1.
TYPE-POOLS: truxs , slis.
*PARAMETERS: dataset(132) LOWER CASE DEFAULT
* 'c:\temp\etchingload.txt'.
PARAMETER: pfile LIKE rlgrap-filename." OBLIGATORY.
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
PARAMETER: p_kunnr LIKE kna1-kunnr OBLIGATORY, "kna1-kunnr
 p_bukrs LIKE bseg-bukrs,
 p_mwskz LIKE t007a-mwskz OBLIGATORY,"t007a-mwskz
 p_prctr LIKE cepc-prctr OBLIGATORY,"cepc-prctr
* p_newko LIKE ska1-saknr OBLIGATORY DEFAULT 41000000,"
 p_budat LIKE bkpf-budat OBLIGATORY ,
 p_hkont LIKE bseg-hkont OBLIGATORY DEFAULT 41000000 ,
 p_waers TYPE waers OBLIGATORY DEFAULT 'GBP'."tcurr-waers
SELECTION-SCREEN END OF BLOCK a.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-002.
PARAMETER : report AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
* ALV *
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
 wa_fieldcat LIKE LINE OF it_fieldcat,
 it_top_of_page TYPE slis_t_listheader,
 ls_layout TYPE slis_layout_alv,
 gt_events TYPE slis_t_event.
DATA: it_raw TYPE truxs_t_text_data.
DATA: BEGIN OF record,
* data element: BLDAT
 bldat_001(010), "Invoice Date
* data element: BLART
 blart_002(002), " Doc Type DR or DG if credit
* data element: BUKRS
 bukrs_003(004), " Company Code
* data element: BUDAT
 budat_004(010), "Posting Date
* data element: MONAT
 monat_005(002), "period"
* data element: WAERS
 waers_006(005), "Currency
* data element: XBLNR1
 xblnr_007(016), "Invoice Number
* data element: BKTXT
 bktxt_008(025), "PO number
* data element: SAEOBJART
 docid_009(010),
* data element: NEWBS
 newbs_010(002), "posting Key
* data element: NEWKO
 newko_011(017), "Customer number or GL account
* data element: WRBTR
 wrbtr_012(016), "Amount
* data element: DZTERM
 zterm_013(004),
* data element: DZBD1T
 zbd1t_014(003),
* data element: DZFBDT
 zfbdt_015(010),
* data element: DZUONR
 zuonr_016(018), "Invoice Number
* data element: SGTXT
 sgtxt_017(050), " PO number
* data element: NEWBS
 newbs_018(002),
* data element: NEWKO
 newko_019(017), "GL Account
* data element: WRBTR
 wrbtr_020(016), "Amount
* data element: MWSKZ
 mwskz_021(002), "Tax
* data element: DZUONR
 zuonr_022(018), "Invoice Number
* data element: SGTXT
 sgtxt_023(050), "PO Number
* data element: PRCTR
 prctr_024(010), "Profit Center
* data element: WRBTR
 wrbtr_025(016), " Amount
* data element: MWSKZ
 mwskz_026(002), "Tax
* data element: DZUONR
 zuonr_027(018), "Invoice Number
* data element: SGTXT
 sgtxt_028(050), "PO Number
* data element: FMORE
 fmore_029(001),
* data element: PRCTR
 prctr_030(010), "Pr Center
* data element: FWSTE
 fwste_01_031(016),
 END OF record.
DATA: BEGIN OF it_excel OCCURS 0,
* data element: XBLNR1
 xblnr_007(016), "Invoice Number
* data element: BLDAT
 bldat_001(010), "Invoice Date
* data element: WRBTR
 wrbtr_012(016), "Amount
* data element: WRBTR
 wrbtr_025(016), " Tax Amount
* data element: WRBTR
 wrbtr_020(016), "Gross Amount
* data element: BLART
 blart_002(002), " No of units
* data element: MONAT
 monat_005(002), "No of units second test"
* data element: BKTXT
 bktxt_008(025), "PO number
* data element: SGTXT
 sgtxt_017(050), " PO number
* data element: BUKRS
 bukrs_003(004), " Company Code
* data element: BUDAT
 budat_004(010), "Posting Date
* budat_004 TYPE string, "Posting Date
* data element: WAERS
 waers_006(005), "Currency*
* data element: NEWKO
 newko_011(017), "Customer number or GL account
* data element : kunnr
 kunnr_019(010), " customer
 mwskz(002),
 prctr(010),
 date(002),
 month(002),
** data element: BKTXT
* bktxt_008(025), "PO number
** data element: SAEOBJART
* docid_009(010),
** data element: NEWBS
* newbs_010(002), "posting Key
** data element: DZTERM
* zterm_013(004),
** data element: DZBD1T
* zbd1t_014(003),
** data element: DZFBDT
* zfbdt_015(010),
** data element: DZUONR
* zuonr_016(018), "Invoice Number
** data element: NEWBS
* newbs_018(002),
** data element: NEWKO
* newko_019(017), "GL Account
** data element: MWSKZ
* mwskz_021(002), "Tax
** data element: DZUONR
* zuonr_022(018), "Invoice Number
** data element: SGTXT
* sgtxt_023(050), "PO Number
** data element: PRCTR
* prctr_024(010), "Profit Center
** data element: MWSKZ
* mwskz_026(002), "Tax
** data element: DZUONR
* zuonr_027(018), "Invoice Number
** data element: SGTXT
* sgtxt_028(050), "PO Number
** data element: FMORE
* fmore_029(001),
** data element: PRCTR
* prctr_030(010), "Pr Center
** data element: FWSTE
* fwste_01_031(016),
 END OF it_excel.
DATA : BEGIN OF it_bkpf OCCURS 0,
 belnr LIKE bkpf-belnr,
 budat LIKE bkpf-budat,
 bldat LIKE bkpf-bldat,
 xblnr LIKE bkpf-xblnr,
 bktxt LIKE bkpf-bktxt,
 total LIKE bseg-dmbtr,
 numdocs TYPE p DECIMALS 0,
 END OF it_bkpf,
 BEGIN OF it_bseg OCCURS 0,
 belnr LIKE bseg-belnr,
 dmbtr LIKE bseg-dmbtr,
 mwsts LIKE bseg-mwsts,
 pswsl LIKE bseg-pswsl,
 END OF it_bseg,
 BEGIN OF it_final OCCURS 0,
 belnr LIKE bkpf-belnr,
 budat LIKE bkpf-budat,
 bldat LIKE bkpf-bldat,
 xblnr LIKE bkpf-xblnr,
 bktxt LIKE bkpf-bktxt,
 dmbtr LIKE bseg-dmbtr,
 mwsts LIKE bseg-mwsts,
 pswsl LIKE bseg-pswsl,
 END OF it_final.
***** End generated data section ***
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pfile.
PERFORM sub_browse_file. "Get file name
START-OF-SELECTION.
PERFORM sub_data_load. " Transfer excel into internal table.
PERFORM sub_calc_excel.
IF report = 'X'.
* PERFORM data_selection.
* PERFORM data_move.
*********************************GET ALV DATA
 PERFORM alv_get_data.
*********************************ALV GRID DATA
 PERFORM alv_grid.
ENDIF.
*if report = ''.
* PERFORM write.
* PERFORM open_dataset USING dataset.
PERFORM open_group.
* DO.
* READ DATASET dataset INTO record.
LOOP AT it_excel.
* IF sy-subrc <> 0. EXIT. ENDIF.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF05A-NEWKO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BKPF-BLDAT'
 it_excel-bldat_001.
 PERFORM bdc_field USING 'BKPF-BLART'
 'DR'." record-blart_002.
 PERFORM bdc_field USING 'BKPF-BUKRS'
 it_excel-bukrs_003.
 PERFORM bdc_field USING 'BKPF-BUDAT'
 it_excel-budat_004.
 PERFORM bdc_field USING 'BKPF-MONAT'
 '3'. "record-monat_005.
 PERFORM bdc_field USING 'BKPF-WAERS'
 it_excel-waers_006.
 PERFORM bdc_field USING 'BKPF-XBLNR'
 it_excel-xblnr_007.
 PERFORM bdc_field USING 'BKPF-BKTXT'
 it_excel-bktxt_008.
 PERFORM bdc_field USING 'FS006-DOCID'
 '*' ."record-docid_009.
 PERFORM bdc_field USING 'RF05A-NEWBS'
 '01'." record-newbs_010.
 PERFORM bdc_field USING 'RF05A-NEWKO'
 it_excel-kunnr_019 .
 PERFORM bdc_dynpro USING 'SAPMF05A' '0301'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'RF05A-NEWKO'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BSEG-WRBTR'
 it_excel-wrbtr_020." it_excel-wrbtr_012.
 PERFORM bdc_field USING 'BSEG-ZTERM'
 'NT30' ." record-zterm_013.
 PERFORM bdc_field USING 'BSEG-ZBD1T'
 '30'."record-zbd1t_014.
 PERFORM bdc_field USING 'BSEG-ZFBDT'
 it_excel-bldat_001."record-zfbdt_015.
 PERFORM bdc_field USING 'BSEG-ZUONR'
 it_excel-xblnr_007."record-zuonr_016.
 PERFORM bdc_field USING 'BSEG-SGTXT'
 it_excel-sgtxt_017.
 PERFORM bdc_field USING 'RF05A-NEWBS'
 '50'." record-newbs_018.
 PERFORM bdc_field USING 'RF05A-NEWKO'
 it_excel-newko_011." record-newko_019."Gl account
 PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'BSEG-SGTXT'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '/00'.
 PERFORM bdc_field USING 'BSEG-WRBTR'
 it_excel-wrbtr_012."changes from 12 to 20
 PERFORM bdc_field USING 'BSEG-MWSKZ'
 it_excel-mwskz." record-mwskz_021.
 PERFORM bdc_field USING 'BSEG-ZUONR'
 it_excel-xblnr_007." record-zuonr_022.
 PERFORM bdc_field USING 'BSEG-SGTXT'
 it_excel-sgtxt_017." record-sgtxt_023.
 PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'COBL-PRCTR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'COBL-PRCTR'
 it_excel-prctr ." record-prctr_024.
 PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'BSEG-WRBTR'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=STER'.
 PERFORM bdc_field USING 'BSEG-WRBTR'
 it_excel-wrbtr_012." it_excel-wrbtr_025.
 PERFORM bdc_field USING 'BSEG-MWSKZ'
 it_excel-mwskz.
 PERFORM bdc_field USING 'BSEG-ZUONR'
 it_excel-xblnr_007." record-zuonr_027.
 PERFORM bdc_field USING 'BSEG-SGTXT'
 it_excel-sgtxt_017." record-sgtxt_028.
 PERFORM bdc_field USING 'DKACB-FMORE'
 'X' ."record-fmore_029.
 PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'COBL-PARGB'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENTE'.
 PERFORM bdc_field USING 'COBL-PRCTR'
 it_excel-prctr." record-prctr_030.
 PERFORM bdc_dynpro USING 'SAPLTAX1' '0300'.
 PERFORM bdc_field USING 'BDC_CURSOR'
 'BSET-FWSTE(01)'.
 PERFORM bdc_field USING 'BDC_OKCODE'
 '=GOBU'.
 PERFORM bdc_field USING 'BSET-FWSTE(01)'
 it_excel-wrbtr_025." record-fwste_01_031.
 PERFORM bdc_transaction USING 'FB01'.
 REFRESH:bdcdata,messtab.
ENDLOOP.
REFRESH:bdcdata.
** PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'RF05A-NEWKO'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '/00'.
* PERFORM bdc_field USING 'BKPF-BLDAT'
* record-bldat_001.
* PERFORM bdc_field USING 'BKPF-BLART'
* record-blart_002.
* PERFORM bdc_field USING 'BKPF-BUKRS'
* record-bukrs_003.
* PERFORM bdc_field USING 'BKPF-BUDAT'
* record-budat_004.
* PERFORM bdc_field USING 'BKPF-MONAT'
* record-monat_005.
* PERFORM bdc_field USING 'BKPF-WAERS'
* record-waers_006.
* PERFORM bdc_field USING 'BKPF-XBLNR'
* record-xblnr_007.
* PERFORM bdc_field USING 'BKPF-BKTXT'
* record-bktxt_008.
* PERFORM bdc_field USING 'FS006-DOCID'
* record-docid_009.
* PERFORM bdc_field USING 'RF05A-NEWBS'
* record-newbs_010.
* PERFORM bdc_field USING 'RF05A-NEWKO'
* record-newko_011.
* PERFORM bdc_dynpro USING 'SAPMF05A' '0301'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'RF05A-NEWKO'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '/00'.
* PERFORM bdc_field USING 'BSEG-WRBTR'
* record-wrbtr_012.
* PERFORM bdc_field USING 'BSEG-ZTERM'
* record-zterm_013.
* PERFORM bdc_field USING 'BSEG-ZBD1T'
* record-zbd1t_014.
* PERFORM bdc_field USING 'BSEG-ZFBDT'
* record-zfbdt_015.
* PERFORM bdc_field USING 'BSEG-ZUONR'
* record-zuonr_016.
* PERFORM bdc_field USING 'BSEG-SGTXT'
* record-sgtxt_017.
* PERFORM bdc_field USING 'RF05A-NEWBS'
* record-newbs_018.
* PERFORM bdc_field USING 'RF05A-NEWKO'
* record-newko_019.
* PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'BSEG-SGTXT'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '/00'.
* PERFORM bdc_field USING 'BSEG-WRBTR'
* record-wrbtr_020.
* PERFORM bdc_field USING 'BSEG-MWSKZ'
* record-mwskz_021.
* PERFORM bdc_field USING 'BSEG-ZUONR'
* record-zuonr_022.
* PERFORM bdc_field USING 'BSEG-SGTXT'
* record-sgtxt_023.
* PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'COBL-PRCTR'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=ENTE'.
* PERFORM bdc_field USING 'COBL-PRCTR'
* record-prctr_024.
* PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'BSEG-WRBTR'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=STER'.
* PERFORM bdc_field USING 'BSEG-WRBTR'
* record-wrbtr_025.
* PERFORM bdc_field USING 'BSEG-MWSKZ'
* record-mwskz_026.
* PERFORM bdc_field USING 'BSEG-ZUONR'
* record-zuonr_027.
* PERFORM bdc_field USING 'BSEG-SGTXT'
* record-sgtxt_028.
* PERFORM bdc_field USING 'DKACB-FMORE'
* record-fmore_029.
* PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'COBL-PARGB'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=ENTE'.
* PERFORM bdc_field USING 'COBL-PRCTR'
* record-prctr_030.
* PERFORM bdc_dynpro USING 'SAPLTAX1' '0300'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'BSET-FWSTE(01)'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=GOBU'.
* PERFORM bdc_field USING 'BSET-FWSTE(01)'
* record-fwste_01_031.
* PERFORM bdc_transaction USING 'FB01'.
* ENDDO.
PERFORM close_group.
* PERFORM close_dataset USING dataset.
*endif.
*& Form sub_browse_file
* text
* --> p1 text
* <-- p2 text
FORM sub_browse_file .
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = syst-cprog
 dynpro_number = syst-dynnr
* FIELD_NAME = ' '
 IMPORTING
 file_name = pfile.
ENDFORM. " sub_browse_file
*& Form sub_data_load
* text
* --> p1 text
* <-- p2 text
FORM sub_data_load .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
 EXPORTING
* I_FIELD_SEPERATOR =
 i_line_header = 'X'
 i_tab_raw_data = it_raw
 i_filename = pfile
 TABLES
 i_tab_converted_data = it_excel[]
* EXCEPTIONS
* CONVERSION_FAILED = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " sub_data_load
**& Form data_selection
** text
** --> p1 text
** <-- p2 text
*FORM data_selection .
* SELECT * FROM bkpf
* INTO CORRESPONDING FIELDS OF TABLE it_bkpf
* WHERE budat = p_budat AND
* bukrs = p_bukrs.
* IF NOT it_bkpf[] IS INITIAL.
* SELECT belnr dmbtr mwsts pswsl
* FROM bseg INTO TABLE it_bseg
* FOR ALL ENTRIES IN it_bkpf
* WHERE belnr = it_bkpf-belnr AND
* kunnr = p_kunnr AND
* hkont = p_hkont AND
* pswsl = p_waers.
* ENDIF.
*ENDFORM. " data_selection
**& Form data_move
** text
** --> p1 text
** <-- p2 text
*FORM data_move.
* SORT : it_bseg BY belnr,
* it_bkpf BY belnr.
* LOOP AT it_bseg.
* it_final-dmbtr = it_bseg-dmbtr.
* it_final-belnr = it_bseg-belnr.
* it_final-mwsts = it_bseg-mwsts.
* it_final-pswsl = it_bseg-pswsl.
* READ TABLE it_bkpf WITH KEY belnr = it_bseg-belnr BINARY SEARCH.
* IF sy-subrc = 0.
* it_final-budat = it_bkpf-budat.
* it_final-bldat = it_bkpf-bldat.
* it_final-xblnr = it_bkpf-xblnr.
* it_final-bktxt = it_bkpf-bktxt.
* ENDIF.
* APPEND it_final.
* CLEAR it_final.
* ENDLOOP.
*ENDFORM. " data_move
*& Form alv_get_data
* text
* --> p1 text
* <-- p2 text
FORM alv_get_data .
CLEAR it_fieldcat.
***************** Document number
* wa_fieldcat-col_pos = '1'. " ALV O/P COL-1
wa_fieldcat-fieldname = 'XBLNR_007'.
wa_fieldcat-seltext_m = 'Document number'.
wa_fieldcat-just = 'L'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
***************** Posting Date
* wa_fieldcat-col_pos = '2'. " ALV O/P COL-1
wa_fieldcat-fieldname = 'BUDAT_004'.
wa_fieldcat-seltext_m = 'Posting Date'.
wa_fieldcat-just = 'L'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 20.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
******************** Document Date
* wa_fieldcat-col_pos = '3'. " ALV O/P COL-2
wa_fieldcat-fieldname = 'BLDAT_001'.
wa_fieldcat-seltext_m = 'Document Date'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'IT_EXCEL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
********************* REFERENCE DOCUMENT
** wa_fieldcat-col_pos = '4'. " ALV O/P COL-2
* wa_fieldcat-fieldname = 'XBLNR'.
* wa_fieldcat-seltext_m = 'REFERENCE DOCUMENT'.
* wa_fieldcat-just = 'L'.
* wa_fieldcat-tabname = 'IT_EXCEL'.
** wa_fieldcat-outputlen = 15.
* APPEND wa_fieldcat TO it_fieldcat.
* CLEAR wa_fieldcat.
***************** DOCUMENT HEADER TEXT
* wa_fieldcat-col_pos = '5'. " ALV O/P COL-3
wa_fieldcat-fieldname = 'SGTXT_017'.
wa_fieldcat-seltext_m = 'DOCUMENT HEADER TEXT'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'IT_EXCEL'.
* wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*******************Invoice Net amount
* wa_fieldcat-col_pos = '6'. " ALV O/P COL-4
wa_fieldcat-fieldname = 'WRBTR_012'.
wa_fieldcat-seltext_m = 'Invoice Net amount'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'IT_EXCEL'.
* wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** Tax Amount
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'WRBTR_025'.
wa_fieldcat-seltext_m = 'Tax Amount'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** NEt Amount
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'WRBTR_020'.
wa_fieldcat-seltext_m = 'Net Amount'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** General ledger currency
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'WAERS_006'.
wa_fieldcat-seltext_l = 'General ledger currency'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 25.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " alv_get_data
*& Form alv_grid
* text
* --> p1 text
* <-- p2 text
FORM alv_grid .
* PERFORM fill_list_header USING it_top_of_page[].
* PERFORM event-build USING gt_events[].
PERFORM fill_layout USING ls_layout.
MESSAGE 'Please press F3 to generate a session or call transaction method after getting report!' TYPE 'I'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-repid
 is_layout = ls_layout
 it_fieldcat = it_fieldcat
 it_events = gt_events[]
 i_save = 'A'
 TABLES
 t_outtab = it_excel
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " alv_grid
* FORM FILL_LAYOUT *
FORM fill_layout USING p_ls_layout TYPE slis_layout_alv.
p_ls_layout-zebra = 'X'.
p_ls_layout-cell_merge = 'X'.
ENDFORM. "fill_layout
*& Form sub_calc_excel
* text
* --> p1 text
* <-- p2 text
FORM sub_calc_excel .
 data: idate TYPE sy-datum,
 tdat8 type string.
LOOP AT it_excel.
 CONCATENATE it_excel-blart_002 '/' it_excel-monat_005 '/' it_excel-bktxt_008 INTO
 it_excel-sgtxt_017.
 it_excel-bukrs_003 = p_bukrs.
* it_excel-budat_004 = p_budat.
 it_excel-waers_006 = p_waers.
 it_excel-newko_011 = p_hkont.
 it_excel-kunnr_019 = p_kunnr.
 it_excel-mwskz = p_mwskz.
 it_excel-prctr = p_prctr.
 idate = p_budat.
 CALL FUNCTION 'DATUMSAUFBEREITUNG'
 EXPORTING
* FLAGM = ' '
* FLAGW = ' '
 IDATE = idate
* IMONT = ' '
* IWEEK = ' '
 IMPORTING
* MDAT4 =
* MDAT6 =
* TDAT4 =
* TDAT6 =
 TDAT8 = tdat8
* WDAT4 =
* WDAT6 =
* EXCEPTIONS
* DATFM_UNGUELTIG = 1
* DATUM_UNGUELTIG = 2
* OTHERS = 3
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 it_excel-budat_004 = tdat8.
* CONCATENATE it_excel-budat_004+4(2) '/' it_excel-budat_004+6(2) '/' it_excel-budat_004+0(4)
* INTO it_excel-budat_004.
* SPLIT it_excel-bldat_001 AT '/' INTO it_excel-month it_excel-date.
* CONCATENATE it_excel-date '.' it_excel-month '.' it_excel-bldat_001+6(4) INTO it_excel-bldat_001.
 MODIFY it_excel.
 CLEAR it_excel.
ENDLOOP.
ENDFORM. " sub_calc_excel
*& Form write
* text
* --> p1 text
* <-- p2 text
*form write .
*OPEN DATASET dataset FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*data: wa_excel like line of it_excel.
*loop at it_excel into wa_excel.
*TRANSFER wa_excel to dataset.
*endloop.
*CLOSE DATASETdataset.
*endform. " write

Adding data to Manual Distribution Rule from DIAPI

Hi
I am searching for the object to insert the data to OMDR (manual distribution rule) using DI API. Can any one help me out.
I found many questions related to adding data to manual distribution rule using DIAPI which were not answered.
Thanks in Advance.

hi.
Just check the below posts.
object type of distribution rules
Distribution rules setup..

How to transfer data in A tableview control in transaction ME21n

Dear friends,
I m new in the field of SAP ABAP.
And right now i m trying to transfer the data in a tableview control in transaction ME21n. I've recorded the sequence of mandatory fields in transaction ME21n but, when i try to transfer the data using BDC call transaction method the order of manadatory fields change.
I m trying to transfer data from text file.
If anybody has a solution to this problem please tell me how to sort out this.
Thanks in advance.

Hi Vivek,
Welcome to SDN.
BDC solution will not work with transaction ME21N.
ME21N is an enjoy SAP transaction which has a lot of new objects that BDC can not call/use.
Please use transaction ME21 instead of ME21N.
Hope this will help.
Regards,
Ferry Lianto
Please reward points in helpful.

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

Error in saving large value with the data input query

Hi,
I am trying to save a large value in 0Quantity using the data input query into a realtime infocube
e-g
123456789.1234
Error says too many digits.
When i try to save 8 digits before the decimal point ,no error, if it is 9digits before decimal it's thro' error.
Is there any limitation before the decimal.
i know that 0Quantity can take 17 digits including the sign.
Any suggestions.?
regards,
ram

try budgetting in thousands in stead of units? (setting on query itself)
D

Tree-control for data input?

Hi,
I need to program an input screen for values that have hierarchical dependencies (e.g. sums). I feel, the most adequate user-interface would be a tree control, because of the data dependencies and also because the users asked for a possibility to collapse/expand parts of the data during input.
I had a look at CL_GUI_COLUMN_TREE, but I'm not sure, if it can be used for data input. Has anyone done something like this before or can anybody direct me to some additional sample coding? (the sample coding in the reuse library didn't do it...)
Thanks for your help, greetings, Kathrin!

Hello Kathrin,
Since you say that the user's input is hierarchical in nature, it is nice to have a tree-control for input. But, the choice of using a custom-control-version of the tree is a cause for some concern. I cannot recollect any of the SAP screens where the input can be given through such a tree framework (please do let me know if you have come across one). The problem with such a tree would be in the areas of even-handling. Filling the tree with appropriate data at the right times would be another challenge.
However, there's one alternative that I would like to direct your attention to. You must have observed another kind of tree, when you select an application component from the APPLICATION HIERARCHY, which is just like a list. Also, the Transport Organizer (SE09), Menu Painter (SE41) etc., have this kind of a tree. You can use this if you (or rather your users) are very particular on having a tree display. For more information, you can see the Function Group SEUT, which has the required function modules to accomplish the same. The Function Group is well documented, and you might have to work a little on the function modules themselves.
Please do let me know if this is a suitable option to meet your requirement. All the best,
Regards,
Anand Mandalika.

[Solved] CUPS: Unable to write print data: Input/output error

I'm filling this for the benefit of those poor googlers that can reach here.
Symptoms: After trying to print a "complex" image the printer made too much breaks, and failed.
The problem is, it then didn't came up. I mean, I restarted the printer, cupsd, the whole system, and nothing.
I was unable to print again, it showed "Unable to write print data: Input/output error" and refused to print anything.
I then saw that in /etc/cups I had printers.conf and printers.conf.O files, which differed (other than in StateTime), that printers.conf.O had
State Idle
but printers.conf had:
State Stopped
StateMessage Unable to write print data: Input/output error
Reason paused
Probably due to the ErrorPolicy being stop-printer.
So seeing I followed the following steps:
Stop cups
Replace printers.conf with printers.conf.O (I could also had manually edited it)
Start cups
It then went working flawlessly.
There was probably an option in the web interface combobox for doing that. The problem is that I didn't realise it was stopped, so didn't know how to make it work. Moreover, some posts in the web recommended reinstalling the printer (which would skip the problem by creating a new printer).

I think that I had this same problem, and fixed it by reinstalling the printer. Thank you for your post.

How to set todays date in message date input field in uix

Hello everybody,
Im using jdeveloper 9015+adf+uix
I am having an input form and in that i want to set the date input field with the current date(default value).
Does anybody of you know how I should do this.
Any help is appreciated,
Thanks in advance

Hi,
Did you figure out on how to default system date in a date input field??
I have a similar requirement in OA framework. Please let me know if you have any ideas.
Thanks,
vinay.

How to display current system Date in the Date Input field ?

Hi,
I am having a Date Input field( binded to Data type). On load, i would like to display the current system date filled in that input field.
How do i achieve this ?
Reg/Venkat

Hi Venkatesan,
In your view in your init() method add the following code:
wdContext.currentContextElement().setOrderDate(new Date(System.currentTimeMillis()));
this is if your Date-attribute is in the root of the context.
else you have to set the date in the node where the date-attribute is present with:
IYOURNODEElement node = wdContext.createYOURNODEElement();
node.setOrderDate(new Date(System.currentTimeMillis()));
regards,
Björn

ADF 11g Date input

I am using date input component in ADF 11g.
This component let u select only date. but I want the user be able to select date and time as well.
which date component should I drop on page ?
thx
p

All you have to do to see it in action is give your ADF BC EO date field the type of Timestemp instead of Date, and possibly add a nice format mask under the UI hints like: yyyy-MM-dd HH:mm:ss
But, I do not have Entity Object in my application. ADF page was generated as part of "right click BPEL Human Task ---- Auto generate ADF Task Form".
How do I have time as well in this case ?
thx
p

Data Input on Distribution of Mirror Transactions

Similar Messages

Maybe you are looking for