Data Loss in Palm OS - Need a Solution

I have a Palm Treo 755p and use PalmOS 6.2.2 daily, running hotsyncs about once a week. Palm OS is like my lifeline the way I use it so much. I use the calendar, to do list and address book with about 5400 contacts. I am running windows xp pro on a very good quality laptop which I have had for about 2 years.
I have been using Palm software for years and never had any problems until about 6 months ago when I started noticing that some of my contacts were disappearing and my to do list was getting smaller. It happens at the most random times and I have absolutely no explanation for it. One minute I will have 5412 contacts and the next minute it will be half of that. It has probably happened about 8 times over the last six months. I was using an older version of palm until about 5 months ago when I upgraded to 6.2.2 to see if that would fix my problem, but it did not.
Up until this point it hasn't been THAT big of a deal to me because I do backups often so I am able to restore the majority of my lost contacts by using the last known good "address.mdb" or "address.bak" that I have on my external backup drive. However, this problem seems to be happening more and more frequently and is wearing down on my nerves, to the point I am seriously considering just ditching PalmOS and my Palm device entirely and getting an iPhone 4 or something with Android. It would still be much easier though if I could just find a solution to this problem. I have asked around, called tech support, and browsed the forums but have been unable to find a solution or an explanation.
If somebody could help me with this or atleast steer me in the right direction it would be greatly appreciated. Just let me know if there is anymore pertinent information I can provide. The only other thing I can think of that might have something to do with it is that for quite a while now I have been getting a PMtracedatabase protocol error everytime I do a hotsync, but I have been told that is nothing to worry about.
Please help! Thank you in advance - Greg D.

I been looking at Denes workspace and tried to follow his javascript example. I dont know any javascript but did have a good go over the weekend. This is how i did it
i created a new button template:
<table class="..." cellspacing="..." cellpadding=".." border="..."
summary="" id="buttonHide" >
Then in put my button in this template!
Then in the header of the page i put
<script type="text/javascript" language="javascript">
function f_showhideButton(pThis, pValue)
if (pValue == 2)
{$x_HideItemRow(pThis);}
else
{$x_ShowItemRow(pThis)}
</script>
In the footer of my button region i put
<script language="JavaScript" type="text/javascript">
f_showhideButton('buttonHide', '2');
</script>
and in the text when no data found section of the rpt i put
<script language="JavaScript" type="text/javascript">
f_showhideButton('buttonHide', '1');
</script>
this unfortunatly did not work
I may have got this wrong but i got no errors on the web page
any ideas?

Similar Messages

Date loss issues.. Need serious help ..

Alright, so. Iv had my iPod for over a year now and this has never happened.. I bought Bruno's new album (unorthodox jukebox) and I had to factory restore it. I backed everything up but when I put it back on my iPod, I had no music or apps.. So does that mean I'm stuck buying it again? or is there a way i can contact apple and get it again. I have the purchase on my Credit Card showing up as 1$ though (I used a gift card for the other amount)
If anyone has anything reguarding this. Please contact me at [email protected]
Thanks

Do you use iTunes, or are you managing all your music exclusively on the iPod? The latter is a dangerous strategy. You can use iTunes to download purchased music again. Just click on the "Purchased" link on the right side of the screen. It should be obvious from there. There may be a way do re-download directly to an iPod, but I don't know what it is. If you don't want to use iTunes to manage your iPod, you really ought to consider subscribing to iTunes Match. It will store up to 25,000 tracks in iCloud.

IS-U/CRM business partner created in SD results in data loss

Dear experts,
I have been investigating a strange issue with a customer.
It concerns a IS-U/CRM architecture, where also the SD customers are exchanged.
- All IS-U business partners are exchanged. Not all of these business partners have an SD customer (with same number) linked.
- Some SD customers (some account groups) have no IS-U business partner linked
Now when in IS-U a business partner is extended for SD (via reference customer) a bdoc is sent to crm, containing next changes :
- is_customer is set to X
- Sd account group is filled
On the R/3-ISU side the customer is created in SD. But when processing the BDoc sent to CRM, crm answers also with a customer create (??) which results in the SD customer to be overwritten
--> this is clear because we have blocked the queues and after extending the BP in ISU the SD customer was created with userid of the employee (ERNAM), and after processing BDoc the SD customer creator (ERNAM) was changed to the RFC customer.
This also leads to the fact that data which was copied in from the ref.customer into the SD customer was overwritetn again by the CRM insert.
Has anybody ever been confronted with a similar problem or can give me some advice how to handle this. As we are already in production, and this leads to data loss, In don't need to say this is a very urgent issue for us.
Thank you very much, and of course points will be rewarded!!
Regards,
Michiel Strybol

Hi Alin,
Thank you for your reply.
I'll try to explain these in some more detail :
1/ We have a system landscape which includes ECC/IS-U & CRM
2/ We have different scenarios active:
- We have a scenario where IS-U is not involved, meaning SD customers (=ECC customers in the Sales & Distribution Module (KNA1)) are replicated to CRM
- IS-U business partners are replicated to CRM. But not all IS-U business partners have an SD customer record active. When billing needs to be done for such a customer, an SD customer is created for this ISU business partner (from within ISU), using a reference customer in SD. Apparently this also seems to trigger a SD customer create sent from CRM which causes our problem ...
There is no master system. Business partners can be created both in ISU and CRM, and should the be replicated in the other system
Hopefully this clarifies it for you.
Thank you very much in advance!!
Michiel

Need a method for importing Palm III data into a Palm Centro

I just bought a Palm Centro (Verizon), with the expectation of importing data from my old Palm III. From the Palm III Desktop, I exported Contacts, Calendar, Tasks, and Memos into separate folders (this was done on a Windows XP PC) and copied the resulting folders & files onto a flash drive. But when I try to import these files into the Palm Centro desktop (on a new Mac Pro with OSX), the backup files are not in a "recognized format." Does anyone have a process for reliably getting the Palm III data into the Palm Centro? Also, is there an easy way to purge unwanted Contacts/Calendar events from the Palm Centro handheld? With all the trial and error, its accumulating a lot of garbage. Thanks...
Post relates to: Centro (Verizon)

Click on the following link for the upgrade guide on kb.palm.com
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=12926
You will need to hard reset the Centro in order to clear out the Centro before sync'ing. Click on the following link for the hard reset procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
Click on the following link for the support page for your devices on the kb.palm.com webpage.
http://www.palm.com/us/support/centro/centro_vzw/
http://www.palm.com/us/support/palm3/
There are links on the pages to the user guide, troubleshooting, how to's, downloads, etc.
You could try to export the data in each category in Palm desktop, save to the flash drive and import the data.
Click here for the data export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=36288
Make sure you select "ALL" for the range during the export procedure. If you don't, it will only export the currently selected record.
Post relates to: Palm i705

Palm Zire 71 Reset\Data Loss PROBLEM!!

I bought a Palm Zire 71 (From a yard sale) When I open and close the Camera it will turn off and back on, and it resets itself eraceing all my data, Then the PALM logo will appare, and I will need to redo the clock.
Any thoughts? This only happens (So far) When I Open and close the camera.
Thanks
Rob
Post relates to: Zire 71

Given the age of the Zire 71, it would not surprise me that the battery is on its last legs.
There are threads over at Brighthand.com back when the Zire 71 was a relatively new device (4-5 years ago) discussing the ribbon cable. You might find an answer over in that discussion forum.
Reasonably priced repairs can be had at usedpdaparts.com.
Post relates to: Palm TX

I need a reliable (auto reconnect, no data loss, etc) TCP/CP Socket class

I have been searching for a third party (free or pay) socket class that will do things that all of us programmers must do:
reconnect when socket is disconnected
reconnect and re-send data (so no data loss)
and implementing all of these other features that we all require for "reliable" network communications over public networks.
I would like to use this socket class on both my client and server applications. Does one exist somewhere? It certainly must. I want something that is tried and proven. free is great with open source but paying money is okay too. thanks !

I am surprised at these responses. Using JMS or creating my own ARQ seems to not meet my requirement (lots of overhead in the case of JMS you usually need a middle "server" and the overhead is huge in high bandwidth situations -- lots of cpu and extra bandwidth -- and the ARQ is a nice idea but i really dont want to create anything myself)
The fact is TCP/IP is unreliable over the internet. anyone who tries to use sockets over the internet recognizes this. It is not an issue of my application but the fact of the internet. the internet is designed with the assumption that the internet is unreliable (hence why the government created ARPA and the internet)
so what if i loosened the requirement and said it was okay to lose some packets, but i just need something that knows the other side is alive and will reconnect/discnonect appropriately? doesnt this exist already? i mean every tcp/ip programmer is doing this and anyone who implements tcp/ip with the assumption that the "network is reliable" is going to be in big trouble. It doesnt need to be TCP, it can be a reliable UDP (i dont care what transport is used) but i just need something where i can take my existing code, drop in this new class instead of "Socket" and get my project done. it would be nice if it had features like reconnecting, dropping data if it is too old or if there are too many messages. i will be using it in high bandwidth applications (20-50mbps over the internet) and dont need 100% packet reliability, if we drop some packets due to a hiccup that is ok, but i do need it to be intelligent in reconnecting and such.

Data loss in Manage data in HFM 11.1.2. Advice needed

Dear All,
Yesterday while using the Manage data function in HFM we encountered a large amount of data loss. Let me explain.
Our goal was to copy Non Financial accounts Entity Currency data from one budget scenario to another budget scenario. See the below screenshot. While this happened correctly an unintended consequence was that the financial accounts data got erased. So the budgeting team had to end up redoing their budgets again. My question is when we are telling the system to only copy the Non Financial data why would the system even touch the Financial data?? This does not seem right at all.
Later when I was doing testing I changed the above Replace to a Merge and then the system only changed the Non Financial data and kept the Financial data intact. If this is indeed how it works it is very confusing to say the least and does not make sense.
The point being that when we are specifying the account to be replaced or merged why does the system even touch the non-specified accounts? Is this a system bug or its just the way it works? Will appreciate an insight please.

Hi there,
Then I will agree with Eric... and I have also just noticed that you have used the Replace option in your screen which definitely has cleared all the accounts before loading the new data.
For me the best approach is to use the clear functionality to delete any previous data from the Non-Fin accounts and then use the Copy functionality with Merge to copy the data.
Regards,
Thanos

Can't export date book from palm desktop 4.2.1

When I try exporting my date book. Palm crashes. I am using 4.2.1 RevD, on a Mac running OS 10.5.7.
I have deleted the prefs, and duplicated the Palm folder. When I try exporting vCal, it crashes after 400 dates (approximately). When I try exporting tab format or Palm Desktop format, the progress bar never gets past 0%.
I just bought a Pre, and I need to import this data into iCal.
Is there a solution?
Thanks.
Post relates to: Treo 755p (Sprint)

hi,
If you just bought the pre then its best to contact your carrier for help. If sprint cant help you or still having prob they will usually escalate the call to palm tech itself.
On your case the prob really is difficult cause you need to sync first your data into ICAL/ADDRESSBOOK and the only way to do that is to use isync or other third apps program out there. The setup of isync is quite complicated.
Its best your guided properly..
hope this helps..
=)

I need a solution of this complicated problem to finalize my final project

Introduction
This project revolves around an important text processing task, text compression. In particular, you will be required to encode a sequence of words read from a source file into binary strings (using only the characters 0 and 1). It is important to note that text compression makes it possible to minimize the time needed to transmit text over a low-bandwidth channel, such as infrared connection. Moreover, text compression is helpful in storing large documents more efficiently. The coding scheme explored in this project is the Huffman Coding Scheme. While standard encoding schemes, such as Unicode and ASCII, use fixed-length binary strings to encode characters, Huffman coding assigns variable-length codes to characters. The length of a Huffman code depends on the relative frequency of its associated character. Specifically, Huffman coding capitalizes on the fact that some characters are used more frequently than others to use short codewords when encoding high-frequency characters and long codewords to encode low-frequency characters. Huffman coding saves space over state of the art fixed-length encoding and is therefore at the heart of file compression techniques in common use today. Figure 1 shows the relative frequencies of the letters of the alphabet as they appear in a representative sample of English documents.
Letter     Frequency     Letter     Frequency
A     77     N     67
B     17     O     67
C     32     P     20
D     42     Q     5
E     120     R     59
F     24     S     67
G     17     T     85
H     50     U     37
I     76     V     12
J     4     W     22
K     7     X     4
L     42     Y     22
M     24     Z     2
Figure 1. Relative frequencies for the 26 letters of the alphabet.
Huffman coding and decoding
Huffman’s algorithm for producing optimal variable-length codes is based on the construction of a binary tree T that represents the code. In other words, the Huffman code for each character is derived from a full binary tree known as the Huffman coding tree, or simply the Huffman tree. Each edge in the Huffman tree represents a bit in a codeword, with each edge connecting a node with its left child representing a “0” and each edge connecting a node with its right child representing a “1”. Each external node in the tree is associated with a specific character, and the Huffman code for a character is defined by the sequence of bits in the path from the root to the leaf corresponding to that character. Given codes for the characters, it is a simple matter to use these codes to encode a text message. You will have simply to replace each letter in the string with its binary code (a lookup table can be used for this purpose).
In this project, you are not going to use the table given in Figure 1 to determine the frequency of occurrence per character. Instead, you will derive the frequency corresponding to a character by counting the number of times that character appears in an input file. For example, if the input file contains the following line of text “a fast runner need never be afraid of the dark”, then the frequencies listed in the table given in Figure 2 should be used per character:
Character          a     b     d     e     f     H     i     k     n     O     r     s     t     u     v
Frequency     9     5     1     3     7     3     1     1     1     4     1     5     1     2     1     1
Figure 2. The frequency of each character of the String X.
Based on the frequencies shown in Figure 2, the Huffman tree depicted in Figure 3 can be constructed:
Figure 3. Huffman tree for String X.
The code for a character is thus obtained by tracing the path from the root of the Huffman tree to the external node where that character is stored, and associating a left edge with 0 and a right edge with 1. In the context of the considered example for instance, the code for “a” is 010, and the code for “f” is 1100.
Once the Huffman tree is constructed and the message obtained from the input file has been encoded, decoding the message is done by looking at the bits in the coded string from left to right until all characters are decoded. This can be done by using the Huffman tree in a reverse process from that used to generate the codes. Decoding the bit string begins at the root of the tree. Branches are taken depending on the bit value – left for ‘0’ and right for ‘1’ – until reaching a leaf node. This leaf contains the first character in the message. The next bit in the code is then processed from the root again to start the next character. The process is repeated until all the remaining characters are decoded. For example, to decode the string “0101100” in the case of the example under study, you begin at the root of the tree and take a left branch for the first bit which is ‘0’. Since the next bit is a ‘1’, you take a right branch. Then, you take a left branch (for the third bit ‘1’), arriving at the leaf node corresponding to the letter a. Thus, the first letter of the coded word is a. You then begin again at the root of the tree to process the fourth bit, which is a ‘1’. Taking 2 right branches then two left branches, you reach the leaf node corresponding to the letter f.
Problem statement
You are required to implement the Huffman coding/decoding algorithms. After you complete the implementation of the coding/decoding processes, you are asked to use the resulting Java code to:
1.     Read through a source file called “in1.dat” that contains the following paragraph:
“the Huffman coding algorithm views each of the d distinct characters of the string X as being in separate Huffman trees initially with each tree composed of a single leaf node these separate trees will eventually be joined into a single Huffman tree in each round the algorithm takes the two binary trees with the smallest frequencies and merges them into a single binary tree it repeats this process until only one tree is left.”
2.     Determine the actual frequencies for all the letters in the file.
3.     Use the frequencies from the previous step to create a Huffman coding tree before you assign codes to individual letters. Use the LinkedBinaryTree class that we developed in class to realize your Huffman coding trees.
4.     Produce an encoded version of the input file “in1.dat” and then store it in an output file called “out.dat”.
5.     Finally, the decoding algorithm will come into play to decipher the codes contained in “out.dat”. The resulting decoded message should be written to an output file called “in2.dat”. If nothing goes wrong, the text stored in “in1.dat” and the one in “in2.dat” must match up correctly.

jschell wrote:
I need a solution of this complicated problem to finalize my final project The solution:
1. Write code
2. Test code3. If test fails, debug code, then go to step 2.

How can I get around recovering a data file that doesn't need to be??

Sorry I am opening a new thread, but this is the biggest emergency of my 20+ year career.
Oracle 11g
1) redo logs were deleted
2) We don't do backups of the database. It is only used to demo our product, it is not a prod database
3) To get around the problem of the redo logs (which caused Oracle not able to start) I rebuilt the control file with the RESETLOGS option on
Now, when I try to start the database and open it with alter database open resetlogs; I get this:
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/u01/oradata/orcl/system01.dbf'
I don't understand why it wants this and I have no idea to get around it. I don't know what to recover FROM as I already said there are no backups. But why should I have to recover anything, there never was any data loss, only the redo logs were deleted. Why can't I just tell Oracle to forget the recovery, the data files are fine?

Yeah, it was a waste of effort to rebuild your control file. Oracle needs the redologs to perform instance recovery prior to opening the database. That doesn't change just because the control file is rebuilt.
But you unfortunately don't have the necessary redo log file and no database backup. That means you are in real danger of losing your database completely. If you have a current support contract, you need to open a Service Request with Oracle support to see if you can salvage your database.
As P. Forstmann indicates, there is an undocumented way to try to open a database that is missing needed redo log data. But trying and failing may leave you worse off than you are right now. So contacting Oracle support for guidance is the right approach.

Data loss Lacie 500GB external drive_ disk utility changed partition!

Details of problem. I have a 500GB Lacie mini hub HDD which is used with an iMac angle poise. Recently it has been playing up- unable to access folders/files etc. and since I know the PSU fails on these items (capacitors fail -5V and 12V go haywire- already fixed another one - I have a 320GB with a mac mini setup) I removed unit from the imac and connected in place of the 320GB lacie on the mac mini, using the known good PSU. The iMac is running latest 10.4 and mac mini is running latest snow leopard 10.6.1
The Lacie spun up and mounted OK and I was able to access all files folders with no issue, so since I was keen to make sure it was 'fixed' I ran disk utility. It ran and said it verified and then I realised I hadn't run repair so re-did this. Big mistake!
It did the same run and said no problems found, but it then said something like updating partition! Horrified I waited and it seemed to finish or had finished straight away. Not sure. I looked at folders and yes main 2 items in place, but nothing showing below this. ****. It got worse. I ejected and tried to reconnect and low and behold it says drive needs formatting now. Disk utility even shows this 500GB as having 2.2TB of space, which I see in other posts is another issue.
I have important data backed up elsewhere, but there are a large number of files I do not have copies of and suspect there is a way to recover these. I have since seen all the 'data loss' guest account issues and wonder if this is yet another bug in snow leopard.
Have tried running Techtool Pro 5.0.6 to see if it can see the data but its not seeing anything. Will try Diskwarrior and others, but may well shelve to see if apple gets an os update released for data loss issues.
Any thoughts on how to recover? Anyone with a similar issue? I am pretty certain this is not a failed hard drive as it sounds 100% normal. Thanks for any help or guidance.

Thanks for all the comments recieved. V.K. made me re-evaluate what I had proved or not. I was fairly certain (not 100%) that the drive mech was OK, because the psu had failed, but should have proved drive mech was actually OK. So I removed the mech (as USB abd firewire can't do SMART etc.) and hooked up to an old G4 Powermac. I then found that the SMART verified, but had forgotten the 128GB limitation on older macs. So removed and got a PC to hook it up and run latest IBM_Hitachi drive fitness and other diags. (its a Deskstar HD and I have had almost zero issue with these drives over the years.) It checks out fine, so I was correct in my initial thoughts, only the PSU was faulty.
So back to my initial suspicions that Snow Leopard or disk utility has screwed things up, maybe a bug, maybe not. And I did run verify first and it said it was OK, only when I re-ran the repair did it then do a "partition update" (or whatever it said - should have done a screen capture - searched apple but can't find listing of all mesgs avail. must be in developers site I expect). So I am back at looking at how to recover, if at all possible, but as Alsoft have said this is not something Diskwarrior can do directly. Files must still be there just partiton map is now in a ... needs to be initialised mode. Not that I will do that.
So I guess summary is possible bug/funny in 10.6 and/or disk utility.
sounds like I will be contacting Alsoft now
may read up on partition map damage first, so I get a better picture of whats involved.
Cheers and thanks for all the help/ideas.
BTW - been using macs_pcs for decades now and helping friends & family fix things as and when. This is first time needed to post on forum as always found answers to questions I had previously. Must remember the old adage of not jumping onto new technology until it has bedded down I bet if I had hooked up to the old G4 Powermac I wouldn't be in this position. Thanks again.

Question: Will non committed persistence data loss if my application which is using Kodo/JDO crashes???

Hi,
I am very new to JDO and Kodo and I am still learning. I have a user
specification that requires no data loss when the application crashes. If I
am developing my application using Kodo for data access layer, when my
application crashes just because and needs to restart, what happen to all
the persistence data that have not committed to database??
Vivian

I am very new to JDO and Kodo and I am still learning. I have a user
specification that requires no data loss when the application crashes.
If I am developing my application using Kodo for data access layer, when
my application crashes just because and needs to restart, what happen to
all the persistence data that have not committed to database??If an app crashes, all current transactions will be aborted. There is a
difference between data loss and aborting the current transaction. Data
loss implies losing some persistent data -- data that resides in the
database. That won't happen with Kodo.
You will, however, lose any changes that have not been committed to the
database yet. This is a good thing. You absolutely DO NOT want an
unfinished transaction to be recorded, because that could violate the
integrity of your data. Consider a transaction that decrements from one
bank account and increments another to implement a funds transfer. You
certainly wouldn't want to record the decrement unless you are absolutely
sure the increment would be recorded too!

Primarily using the ipad air as an art portfolio but photos i upload in order get rearranged. other than changing the date they were shot, is there any solution to this? can they be reorganized in iphoto on the ipad?

primarily using the ipad air as an art portfolio but photos i upload in order get rearranged. other than changing the date they were shot, is there any solution to this? can they be reorganized in iphoto on the ipad?

You are welcome.
Sorting and organizing photos on IOS devices is one of the things that really need to be improved. It looks like the developers simply did not expect the users to want to keep large photo libraries on an IOS device, where the ordering would matter. I'd send feedback to the developer team, so that they see, what the users want and need:
You can use this form: Apple - iPhoto - Feedback

Data Loss in DB to DB Transformation in ODI

Hi,
I am facing data loss when I am trying a transformation for a DB to DB mapping in ODI.
I have two tables in two different schemas with the following specifications. In ODI designer model of i have put the type of place as number in target and place as varchar2 for source and accordingly done the mapping.It works successfully when i am putting the data as ('12', 'ani', '12000', '55').
Now for testing I am giving the datas as ('1', 'ani', '12000', '55') and ('2', 'priya', '15000', '65t') and when I am executing it is giving the error as expected(ORA-01722: invalid number) in the task (Insert flow into I$ table). My C$ table is populated with the datas from source. But E$,I$ and target tables are not populated with the data.
Now when I am puttting data in source as ('3', 'shubham', '12000', '56') and ('4', 'shan', '12000', '59') it is getting completed successfully , datas from C$ tables are deleted and data is inserted into the target table.
Now my question is where are the datas ('1', 'ani', '12000', '55') and ('2', 'priya', '15000', '65t') gone. If they are lost what is the recoverable table so that no data loss takes place.
The codes for source and target tables are as follows:
source table code:
CREATE TABLE "DEF"."SOURCE_TEST"
    "EMP_ID"   NUMBER(9,0),
    "EMP_NAME" VARCHAR2(20 BYTE),
    "SAL"      NUMBER(9,0),
    "PLACE"    VARCHAR2(10 BYTE),
    PRIMARY KEY ("EMP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "USERS" ENABLE
inserted data:
INSERT INTO "DEF"."SOURCE_TEST" (EMP_ID, EMP_NAME, SAL, PLACE) VALUES ('1', 'ani', '12000', '55')
INSERT INTO "DEF"."SOURCE_TEST" (EMP_ID, EMP_NAME, SAL, PLACE) VALUES ('2', 'priya', '15000', '65t')
Target table code:
CREATE TABLE "ABC"."TARGET_TEST"
    "EMP_ID"     NUMBER(9,0),
    "EMP_NAME"   VARCHAR2(20 BYTE),
    "YEARLY_SAL" NUMBER(9,0),
    "BONUS"      NUMBER(9,0),
    "PLACE"      NUMBER(9,0),
    PRIMARY KEY ("EMP_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "USERS" ENABLE
Thanks.

So, first you have data in "DEF"."SOURCE_TEST".
You then run your interface, and the data is moved into "ABC"."TARGET_TEST" if the interface executes successfully with no errors.
Correct? - no data loss
But if you're saying that you need to handle records which are going to cause the "invalid number" error, then you should read up on 'flow' and 'static' control and how to flag errors before loading them. Flow and Static Control allows ODI to identify erroneous records prior to loading - they'll be put in the E$ table for you to deal with later.
If you haven't already, I'd encourage you to take a look at the documentation on this:
Implementing Data Quality Control

When export mode is full and userid is system, data loss happens.

Hi!
I'm running Oracle 7.3.4 On HP-UX. I have problem when I try to export full my DB.
I make a php program(a kind of ticket management program) and it use WEBDB's data in Oracle.
Now, I export my WEBDB's data through userid="WEBDB" and the result of log is
Connected to: Oracle7 Server Release 7.3.4.3.0 - Production
With the distributed and parallel query options
PL/SQL Release 2.3.4.3.0 - Production
Export done in KO16KSC5601 character set
. about to export WEBDB's tables via Conventional Path ...
. . exporting table IMSI
EXP-00008: ORACLE error 8103 encountered
ORA-08103: object no longer exists
. . exporting table TEMP 334 rows exported
I export full my DB through user="SYSTEM" and the result of log is
. about to export WEBDB's tables via Conventional Path ...
. . exporting table IMSI
EXP-00008: ORACLE error 604 encountered
ORA-00604: error occurred at recursive SQL level 1
ORA-08103: object no longer exists
. . exporting table TEMP 331 rows exported
The num of TEMP's row is 334 rows. I created "IMSI" table 2~3 days ago.
What a terrible row & table loss!
Please, what do I do? I need to do export full and no data loss...

If its anything like exporting in Rel 2, you will have to export using SYS, not another user.
Hope that helps ;)

Data Loss in Palm OS - Need a Solution

Similar Messages

Maybe you are looking for