Data not updating in Metadata with Select options that come from a view

Hi All,
I have a similar problem.
I have a view called "contractnumberview" created in UCM that gets a "contractnumber" from database table called "Contracts"
The view is used as options list for a metadata called "xContractNumber".
The data is inserted in the "Contracts" table from an ADF Application.
Problem:
After a new contract number is inserted into the Contracts table from the adf application, the new contract number does not show up in the check-in form drop down of the xContractNumber metadata field.
If i open the "contractnumberview" from configuration manager, the new contractnumber is listed there.
Is there anything special required to be done so that the contract number is published in the check-in forms also.
Thanks
Amit

Hi Everybody,
I Discovered how to ADD or Delete intens in java class, but now would like to update Title value.
The code is:
            List fields = new ArrayList(2);
            fields.add(new DataResultSet.Field("dDocName"));
            fields.add(new DataResultSet.Field("dDocTitle"));
            DataResultSet resultSetNovo = new DataResultSetImpl();
            resultSetNovo.setFields(fields);
            List leilaoRow = new ArrayList(2);
            leilaoRow.add("SOME_EXISTENT_ID");
            leilaoRow.add("SOME_EXISTENT_DESCRIPTION");
            resultSetNovo.addRow(leilaoRow);
            IdcClient idcClient1 = manager.createClient ("idc://host:port");
            IdcContext userContext1 = new IdcContext ("user","password");
            HdaBinderSerializer serializer1 = new HdaBinderSerializer ("UTF-8", idcClient1.getDataFactory ());
            DataBinder dataBinder1 = idcClient1.createBinder();
            dataBinder1.putLocal("IdcService", "EDIT_SCHEMA_VIEW_VALUES");
            dataBinder1.putLocal("schViewName", "C_LISTA_LEILOES");
            //add/update/delete
            dataBinder1.putLocal("editViewValueAction", "update");
            dataBinder1.addResultSet("LeiloesCadastrados", resultSetNovo);
            serializer1.serializeBinder (System.out, dataBinder1);
            ServiceResponse response1 = idcClient1.sendRequest(userContext1,dataBinder1);
            DataBinder responseData1 = response1.getResponseAsBinder();
The error is:
Unable to edit view values for view 'C_LISTA_LEILOES'. The key CCEE_54321 could not be added due to a primary key constraint violation in the LeiloesCadastrados table.
And the consoel messages during the process is:
@Properties LocalData
IdcService=EDIT_SCHEMA_VIEW_VALUES
UserTimeZone=UTC
UserDateFormat=iso8601
schViewName=C_LISTA_LEILOES
editViewValueAction=update
@end
@ResultSet LeiloesCadastrados
2
dDocName
dDocTitle
CCEE_54321
SOME_DIFERENT_TEST
@end
Im my table the column dDocName is the primary key and I´m trying to change only the dDocTitle column
Any help will be appreciated
Thanks for everybody.
LCruz

Similar Messages

  • Can NOT update video automatically with selected playlists!

    I just bought my iPod today and when I try to put some video on it, the movie does not appear anywhere.
    when I click on the Video button, the "automatically with selected playlist" option is hidden and I cant click on it, and no video title can be observed.
    Do you have to put video in to certain folder to add them?
    And how come the Automatlcally with selected playlist is hidden?

    I had the same issue, however I used this program;
    http://www.videora.com/en-us/Converter/iPod/
    I'm pasting this from the Videora site, the settings worked for me when others didn't, enjoy:
    Configuring videora converter
    0) Start Videora iPod converter.
    1) Click setup in the left nav.
    1.5) Click the profiles tab.
    2) Click new profile.
    3) Now, configure that profile:
    profile name: ipod
    in the video settings section...
    mode: MPEG-4 > CBR
    resolution: 320x240
    passes: one
    bitrate: 768 kbps (384 kbps also works)
    framerate: 29.97 fps
    in the audio settings section...
    bitrate: 128 kbps
    sample rate: Input
    channels: stereo
    4) Click apply to save the profile.
    Now, you're ready to transcode.
    1) Click convert on the left nav.
    2) Click the transcode new video button.
    3) Pick your source video. Mine was an AVI from a torrent.
    4) Under quality profile, choose "ipod", the profile you created using the steps above.
    5) Click start.
    Now you're ready to get the video on your ipod
    1) In iTunes, under the File menu, select add file to library. Find the transcoded one. By default, the transcoded videos pop out under the Videora install directory.
    2) Drag and drop to your ipod.
    Questions/observations:
    1) I haven't been able to get H264 anything to work. Is it broken? How much smaller than MPEG4 is it?
    2) 768 kbps video was about 400 megs/hour; 384 kbps video was about 231 megs/hour. I could readily see a difference in video quality.

  • Innput field with Select option on custom screen

    Hi,
    I need to create an Input field with Select Option(No interval) button on Custom dialog screen .
    Is there any idea how can I create it on screen ?
    Thanks
    Sachin

    create a normal inputfield and place an icon next to it. then in the pai on click of that button use the following code.
    data: wf_tab_field like rstabfield occurs 0 with header line ,
          wf_exl_opt like rsoptions .
    refresh: wf_tab_field  .
        move: 'KOSTL' to wf_tab_field-fieldname ,
              'CSKS' to wf_tab_field-tablename .
        append wf_tab_field .
        clear wf_tab_field .
        move: 'X' to wf_exl_opt-bt ,
              'X' to wf_exl_opt-cp ,
              'X' to wf_exl_opt-ge ,
              'X' to wf_exl_opt-gt ,
              'X' to wf_exl_opt-le ,
              'X' to wf_exl_opt-lt ,
              'X' to wf_exl_opt-nb ,
              'X' to wf_exl_opt-np .
    call function 'COMPLEX_SELECTIONS_DIALOG'
         exporting
           title                   = 'Select Cost Centers'
           text                    = 'Cost Center'
    *         SIGNED                  = 'X'
    *         LOWER_CASE              = ' '
    *         NO_INTERVAL_CHECK       = ' '
    *         JUST_DISPLAY            = ' '
    *         JUST_INCL               = ' '
            excluded_options        = wf_exl_opt
    *         DESCRIPTION             =
            help_field              = 'CSKS-KOSTL'
    *          SEARCH_HELP             = 'KOST'
            tab_and_field           = wf_tab_field
          tables
            range                   = r_kostl
         exceptions
           no_range_tab            = 1
           cancelled               = 2
           internal_error          = 3
           invalid_fieldname       = 4
           others                  = 5
        if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        endif.
        if not r_kostl[] is initial .
          read table r_kostl index 1 .
          if sy-subrc eq 0 .
            move: r_kostl-low to wf_t_kostl .
          endif .
        endif .
    wf_t_kostl  is the screen field name.
    Raja

  • Issue with Select Options

    Dear Experts,
    I used component wdr_select_options to achieve select options functionality, But it displaying only one field as per my requirement user expecting both low & high fields.
    Can you guide for 5 select options whether i have use t times the component at my component level.
    And also could please guide me how to use select options at code level.
    Thanks & Regards,
    Siva Mandapudi.
    Edited by: SIVAMANDAPUDI on Jul 18, 2011 6:39 PM

    Hi Saravan,
    Please find below details.
    The exception is:
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
    procedure "ONACTIONSEARCH_SUPPLIER" "(METHOD)", nor was it propagated by a
    RAISING clause.
    code:
    DATA FOR WORKING WITH SELECT OPTIONS
      data: rt_SUPPLIERNO type ref to data.
      data: rt_SUPPLIERNAME type ref to data.
    field-symbols: <fs_SUPPLIERNO> type table,
                    <fs_SUPPLIERNAME> type table.
      TYPES: BEGIN OF T_SUPPLIERNO,
             SIGN(1),
             OPTION(2),
             LOW TYPE /SAPAPO/LOC,
             HIGH TYPE /SAPAPO/LOC,
            END OF T_SUPPLIERNO.
      TYPES: BEGIN OF T_SUPPLIERNAME,
             SIGN(1),
             OPTION(2),
             LOW TYPE /SAPAPO/LOC_DESCR40,
             HIGH TYPE /SAPAPO/LOC_DESCR40,
            END OF T_SUPPLIERNAME.
      DATA: WA_SUPPLIERNO TYPE T_SUPPLIERNO, IT_SUPPLIERNO TYPE TABLE OF T_SUPPLIERNO,
            WA_SUPPLIERNAME TYPE T_SUPPLIERNAME, IT_SUPPLIERNAME TYPE TABLE OF T_SUPPLIERNAME.
    Retrieve the data from the select option
      rt_SUPPLIERNO = wd_this->m_handler->get_range_table_of_sel_field(
                               i_id = 'ID_SNO' ).
    dump raising when get_range_table_of_sel_field is called.
    Thanks a lot.
    Regards
    Siva Mandapudi.

  • Issue with Select options in select statement - ABAP Question

    Hi
    I am facing an issue with select options. Select statement is returning sy-subrc as 4.
    I wrote the program as below:
    SELECT-OPTIONS:
    s_kunnr FOR bsad-kunnr,
    s_lifnr FOR bsak-lifnr,
    s_gjahr FOR bsad-gjahr,
    s_bukrs FOR bsad-bukrs,
    s_saknr FOR bsad-saknr,
    s_budat FOR bsak-budat.
    In start of selection I have written the select statement as
    SELECT * FROM bsak INTO TABLE lt_bsak
    WHERE bukrs IN s_bukrs AND lifnr = s_lifnr AND gjahr IN s_gjahr AND budat IN s_budat AND saknr IN s_saknr.
    In selection screen I have not entered any values and executed the program. I am not getting any result. When I debug that, sy-subrc is 4 at above select statement. But table has records.
    If am removing the "lifnr = s_lifnr " condition in select then select is returning values.
    I am not getting where I made the mistake. Please suggest.
    Thank you
    Hanu

    Hi,
    The problem here with where condition select option lifnr = s_lifnr.
    Use below select query.
    SELECT * FROM bsak INTO TABLE lt_bsak
    WHERE bukrs IN s_bukrs
        AND lifnr     IN s_lifnr
        AND gjahr   IN s_gjahr
        AND budat  IN s_budat
        AND saknr  IN s_saknr.
    s_lifnr is a select option and you are passing it as parameter lifnr = s_lifnr.
    if you want to pass this s_lifnr as single vale then pass in below mentioned way.
    lifnr = s_lifnr-low
    BR,
    Vijay

  • IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

    I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
    I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
    One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
    If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
    I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
    As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
    DU needs to be reading the packages on the HD, not the (now out of date) install disc.
    The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
    http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

  • Mulitple selection with select option on subscreen

    Hi colleagues,
       I've the following issue:
    I'm programming a dynpro this dynpro contains two subscreens. The lower subscreen will contain another dynpro defined as subscreen with an ALV to display results.
    The top subscreen (0150) area will be filled with a generated subscreen with the command
      SELECTION-SCREEN BEGIN OF SCREEN 0150 AS SUBSCREEN.
    with select options I define my selection area like:
    SELECT-OPTIONS: sa_6 FOR gs_rp_attrib_sel-sonr.
       If I call my transaction starting up the dynpro containing the two subscreens the result looks quit how I expect it. BUT then I try to start up the multiply selection Pop-UP for the selection field by pressing the button just right behind the HIGH input field, nothing happens. The multiply selection pop-up basicly does not show up.
       Any clues what I need to add that it will show up?
       Does the mulitply selection not work with
    SELECTION-SCREEN BEGIN OF SCREEN 0150 <b>AS SUBSCREEN</b>???
    (If I do a simple test program with a selection screen not being a subscreen, the multiply select popup comes up.)

    Hi,
    A subscreen cannot call another screen.
    I guess this is the reason why u are facing this problem.
    Thanks,
    Rashmi.

  • Multiple records with select option

    i have to use select option in selection screen, which wl take the multiple values but that select option wont act as a range, the select option is a session name  from sm35, the table from where data is retrieved is APQI, i have used  a parameter before using select option ,like:
    selection-screen begin of line.
    parameters: P_grpid like apqi-groupid.
    select-options: s_grpid like apqi-groupid.
    selection-screen end of line.
    AT-SELECTION SCREEN ON VALUE REQUEST FOR p-GRPID. " previous situation
    {the code starts
    FM F4 selection is called}
    AT-SELECTION SCREEN ON VALUE REQUEST FOR S_GRPID-low. " CURRENT situation
    FM F4 selection is called}
    now when i give data in slection screen for s_grpid-low then it works as a parametr, but it doesnt take multiple values at s_grpid when i have alos mentioned the same for s_grpid-high.
    Please tell me how to achive multiple records with select option, or u can also send a sample code if you have..
    Thanks
    Swarnali

    Hello Swarnali,
    You need to fill internal table of select-option once you got into the event AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
    so sudo code will be:
    AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
    Select data from table.
       so_carr-LOW = value
       append so_carr.
    You can also use NO INTERVAL to suppress the so_carr-HIGH value on selection screen.
    Thanks,
    Augustin.

  • -moz-transform:scale does not work in Firefox with select tag(DropDown)

    -moz-transform:scale does not work in Firefox with select tag(Dropdown). The Dropdown options are being displayed at incorrect location.

    'Hi, Please try the HTML attached in image. This works in IE, Safari, Crome but not in Firefox

  • How to declare and work with select-option in screen painter?

    hello there,
    can anybody plz suggest me ,how to declare and work with select-option in screen painter?
    neon

    Hi Blue,
    Please check these threads which will help you a lot..
    module pool programming " to add selection-option on screen"
    Re: Select option in Dialog program screen
    Re: SELECT-OPTIONS in Screen
    Good luck
    Narin

  • Working with select option in WD4A

    can any one provide me some document or video file to work with select options in webdynro for abap?

    Hi,
    Find the following URLs
    PDF - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/21706b4b-0901-0010-7d93-c93b6394bc1d
    Video Clip - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/1a3c52e7-0b01-0010-ed81-f31d4868c5d6
    Login to SDN to play the video clip.
    Reward accordingly.
    Regards
    ChandraK

  • URGENT  update a table with a text that has a single quote in it

    Hello, I am trying to update a table with a text that has a single quote in it. I believe I need to use two singles quotes but I am not sure how.
    For example:
    UPDATE TEST
    SET DESCRLONG='Aux fins d'exportations'
    WHERE etc...
    Should I put 2 singles quotes before the quote in the text?
    UPDATE TEST
    SET DESCRLONG='Aux fins d'''exportations'
    WHERE etc...
    Thank you very much :)

    The best way depends on the version of Oracle.
    But, the quick and universal answer is to use two single quotes
    SQL> connect test/test
    Connected.
    SQL> create table test (descrlong varchar2(128));
    Table created.
    SQL> insert into test values ('This is a string with a '' single quote');
    1 row created.
    SQL> select * from test;
    DESCRLONG
    This is a string with a ' single quote
    SQL> update test set descrlong='Aux fins d''exportations'
      2  where descrlong like 'T%';
    1 row updated.
    SQL> select * from test;
    DESCRLONG
    Aux fins d'exportations
    SQL>                                             

  • Problem with:  select 'c' as X from dual

    Problem with 'select 'c' as X from dual'
    I get 2 different results when I execute the above with SQLPlus (or java) depending on the instance I am connected to. For one instance the result is a single character and for the other the character is padded with blanks to 32 chars in the SQLPlus window (and java). Does anyone know what database setting causes this to happen? Is it a version issue ?
    Test #1: Oracle 9.2.0.6 - SQLPlus result is padded with blanks
    SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:27:58 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
    With the Partitioning option
    JServer Release 9.2.0.6.0 - Production
    SQL> select 'c' as X from dual;
    X
    c
    SQL>
    Test #2 Oracle 9.2.0.1 SQLPlus result is a single character.
    SQL*Plus: Release 9.2.0.1.0 - Production on Mon Dec 10 09:29:27 2007
    Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
    Connected to:
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.1.0 - Production
    SQL> select 'c' as X from dual;
    X
    c
    SQL>

    Using 9.2.0.6 On AIX 5.2 I get the single byte result:
    UT1 > select 'c' as X from dual;
    X
    c
    If the databases are on different Oracle Homes you may want to check the sqlplus global logon files for any set commands.
    If you executed the two sql statements from different OS directories you may also want to check your sqlpath for sqlplus .logon files.
    Try issueing clear columns and repeating the statement. Are the results the same?
    HTH -- Mark D Powell --

  • In iTunes on my windows 7 PC, the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's.

    In iTunes on my windows 7 PC, in the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available.  The borders of the window cannot be draged larger.  As a result, I can not uncheck or check some box's on several of the preferences pages.  The Apple people at the store did not help.  I have lownloaded the latest version of iTunes and this is still an issue.  HELP.

    Is there really nobody else with this problem? Really?

  • HT5621 i could not update my applications since the account that applied was when i was in the US...it says that i needed to change itunes store here in the philippines and how do i do that?

    i could not update my applications since the account that applied was when i was in the US...it says that i needed to change itunes store here in the philippines and how do i do that?

    Click here and follow the instructions to change the iTunes Store country.
    (87167)

Maybe you are looking for