Data required in file

Hi ALL,
I need to take the table data of a particular schema in a file .
The file should have the column names and the data which is comma seperated.
like below data.....but how do i get the column names as coma seperated.
Please bear in mind that each table data should be in a file
and comma seperated with the column name as header.
1,Reg/Teleph/Debit,T,1
2,UnReg/Teleph/Debit,F,1
3,Reg/PBX/Debit,T,2
4,UnReg/PBX/Debit,F,2
5,Reg/Other/Debit,T,3
6,UnReg/Other/Debit,F,3
7,Reg/Teleph/NoDebit,T,1
8,UnReg/Teleph/NoDebit,F,1
9,Reg/Teleph/NoDebit,T,2
10,UnReg/Teleph/NoDebit,F,2
11,Reg/Other/NoDebit,T,3
12,UnReg/Other/NoDebit,F,3
Rgds
s

Hi,
I'm not sure if I understood you correctly but give it a shot anyway:
Wouldn't it be sufficient if you select and spool the column names from the data dictonary view? Of course you'll need to use a trick to pivot this result before you can spool it.

Similar Messages

Modifying a particular line (content) of data in a file.

Hi All,
I've a requirement with file modifications, but i'm new to Labview so couldnt correctly fix it...
My req is something like this.....
I've a file named mytemplate1.txt which is added to this post....
In that i've a line, i.e no. in attacehd is 153
"modelLanguageCode=ENU"
In that i wanna put a control to the bolded one above.
So whenever i modify that control to SPA, GER, JPJ .....
It should update the content respectively.
I tried with different file functions available in Labview 8.2 but unable to find the solution ...
So my temporary approach for this is
Concatenate string
where
Part 1 is data above modelLanguageCode=
part 2 ENU
part 3 data after "modelLanguageCode=ENU"
But this doesnt looks ideal for my req.
So please suggest any good solution....
-Suneel.
Attachments:
mytemplate1.txt ‏5 KB
datalog.jpg ‏121 KB

Have a look at the attached example.
Craig
Message Edited by craigc on 07-15-2008 03:50 AM
Message Edited by craigc on 07-15-2008 03:51 AM
LabVIEW 2012
Attachments:
Example11.png ‏5 KB
Example11.vi ‏40 KB

No Data in PDF file in FTP server

Hi All,
I am trying to place a PDF file in FTP server.
Used
CONVERT_OTFSPOOLJOB_2_PDF to convert spool to PDF
SCMS_TEXT_TO_XSTRING
FTP_R3_TO_SERVER to transfer data to FTP.
I am able to see PDF file in FTP and no of pages matches with that of R/3 but there is no data in PDF file.

To get pdf file , you need to set the itcpo-tdgetotf = 'X' and need to pass in the exporting parameter (options in open_form function module ).Then in close_form function module take all the data of otfdata table into an internal table . Then use SX_OBJECT_CONVERT_OTF_PDF function module to convert it to pdf.
I will show with an example.
tables itcpo.
DATA: ch_otf TYPE STANDARD TABLE OF itcoo.
DATA: w_otf TYPE itcoo.
DATA: w_pdf TYPE solisti1. "For PDF
DATA: i_content_txt TYPE soli_tab.
DATA: temp1 TYPE sx_format VALUE 'OTF',
        temp2 TYPE sx_format VALUE 'PDF'.
DATA: c_printer TYPE sx_devtype VALUE 'PRINTER'.
DATA: w_transfer_bin TYPE sx_boolean. "Content
DATA: i_content_bin TYPE solix_tab, "Content
        wa_content_bin TYPE solix,
        i_objhead TYPE soli_tab.
itcpo-tdnoprint = 'X'.
itcpo-tdpreview = 'X'.
itcpo-tdgetotf = 'X'.
These three parameters need to be passed along with other required parameters
CALL FUNCTION 'OPEN_FORM'
       EXPORTING form = xformular
                 language = ekko-spras
                 OPTIONS = itcpo
                 archive_index = toa_dara
                 archive_params = arc_params
                 device = xdevice
                 dialog = xdialog
                 mail_sender        = sender
                 mail_recipient     = recipient
       EXCEPTIONS canceled = 01.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = RESULT
    tables
      otfdata = ch_otf.
LOOP AT ch_otf INTO w_otf.
    CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
    INTO w_pdf.
    APPEND w_pdf TO i_content_txt.
ENDLOOP.
converting otf file to pdf file
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
    EXPORTING
      format_src      = temp1        "'OTF'
      format_dst      = temp2        "'PDF'
      devtype         = c_printer
    CHANGING
      transfer_bin    = w_transfer_bin
      content_txt     = i_content_txt
      content_bin     = i_content_bin
      objhead         = i_objhead
      len             = v_len_in
    EXCEPTIONS
      err_conv_failed = 1
      OTHERS          = 2.
Then open dataset and transfer to ftp of the content of table content_bin(i_content_bin) as shown in above example.
I think this will be helpful for you

UPLOAD DATA FROM EXCEL FILE

hi guru,
I want to upload data from excel file for mm02.. first of all help on the matter of how to upload data from excel...
i hv used the FM ALSM_EXCEL_TO_INTERNAL_TABLE.. but its not working it uploading garbage value ... so tell me how to used it...
help me on this matter.

Check below example.
parameters : p_file LIKE rlgrap-filename OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM get_file_name.
PERFORM get_file_to_excel.
*&      Form get_file_name
FORM get_file_name.
DATA: lv_name LIKE sy-repid.
lv_name = sy-repid..
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
            program_name = lv_name
            dynpro_number = syst-dynnr
            static        = 'X'
       CHANGING
            file_name     = p_file.
ENDFORM. " get_file_name
*&      Form get_file_to_excel
FORM get_file_to_excel.
DATA: idata LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_file
            i_begin_col             = '1'
            i_begin_row             = '2' "Do not require headings
            i_end_col               = '2'
            i_end_row               = '60000'
       TABLES
            intern                  = idata
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    STOP.
ENDIF.
* Get first row retrieved
READ TABLE idata INDEX 1.
* Set first row retrieved to current row
DATA: gd_currentrow TYPE i.
gd_currentrow = idata-row.
LOOP AT idata.
*   Reset values for next row
    IF idata-row NE gd_currentrow.
      APPEND f. CLEAR f.
      gd_currentrow = idata-row.
    ENDIF.
    CASE idata-col.
      WHEN '0001'.
        f-belnr   = idata-value.
    ENDCASE.
ENDLOOP.
APPEND f. CLEAR f.

Charting data from text file in LabVIEW 5.1 for Windows

I am having some difficulties trying to figure out how to plot a chart with
data from a file. I would like to be able to read data from a text file
into a chart using LabVIEW 5.1 for Windows. I have looked in the help
within the program and online. I have also looked in the user manual and
the book "LabVIEW for Everyone". Could you please give me specific
instructions on how I would construct the program to be able to do this.
Thank you.

Hi Ellie,
It depends on how data is stored in that txt file. Usually you load the data into an array either using or , the array if necessary and send it to the graph indicator in required form. If you want a more detailed answer, send me a sample data file ([email protected]).

How can I get data in flat file from Pool table and cluster table ?

Hi,
I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table.
Is there any tool avilable to download data into flat file from pool table and cluster table ?
if table name given in the selection screen then data will be downloaded into flat file.
waiting for quick response.
Best Regards,
Bansidhar

Data cannot be retrived directly form the cluster table
as the Cluster results are stored in Cluster Key say for example PCLkey
and form that Key we need to fetch the data
these clustes are not the part of PNP or PNPCE tables
for ur info kindly check

It is necessary to create one header data for each file to be sent to CDFS.

hi GUYS
my sce anrio is FILE-XI-PROXY
REQUIREMENT IS
SOURCE FILE                      TARGET FILE WILL BE
H1                                             H1                        H1                    H1
I1                                               I1                         I2                      I3
I2                                                F1                        F1                    F1
I3
F1
It is necessary to create one header data for each file to be sent to TARGET. Each file will be related to only one SAP Company Code.
Thanks
NAG

aa

Loading data from .csv file into Oracle Table

Hi,
I have a requirement where I need to populate data from .csv file into oracle table.
Is there any mechanism so that i can follow the same?
Any help will be fruitful.
Thanks and regards

You can use Sql Loader or External tables for your requirement
Missed Karthick's post ...alredy there :)
Edited by: Rajneesh Kumar on Dec 4, 2008 10:54 AM

Loading data from .csv file into existing table

Hi,
I have taken a look at several threads which talk about loading data from .csv file into existing /new table. Also checked out Vikas's application regarding the same. I am trying to explain my requirement with an example.
I have a .csv file and I want the data to be loaded into an existing table. The timesheet table columns are -
timesheet_entry_id,time_worked,timesheet_date,project_key .
The csv columns are :
project,utilization,project_key,timesheet_category,employee,timesheet_date , hours_worked etc.
What I needed to know is that before the csv data is loaded into the timesheet table is there any way of validating the project key ( which is the primary key of the projects table) with the projects table . I need to perform similar validations with other columns like customer_id from customers table. Basically the loading should be done after validating if the data exists in the parent table. Has anyone done this kind of loading through the APEX utility-data load.Or is there another method of accomplishing the same.
Does Vikas's application do what the utility does ( i am assuming that the code being from 2005 the utility was not incorporated in APEX at that time). Any helpful advise is greatly appreciated.
Thanks,
Anjali

Hi Anjali,
Take a look at these threads which might outline different ways to do it -
File Browse, File Upload
Loading CSV file using external table
Loading a CSV file into a table
you can create hidden items in the page to validate previous records before insert data.
Hope this helps,
M Tajuddin
http://tajuddin.whitepagesbd.com

Data from a file need to be read and mapped into a custom table of R/3

Hello all,
This is related to inbound to SAP ECC via SAP PI.
There is a requirement concerning PI part that data from a file need to be read and mapped into a custom table of R/3.
To have this scenario developed , do we have any other option than the Proxy ?
My understanding is as follows : File --> SAP PI --> Proxy
You suggestions are welcome.
Regards,
Rachana

Hi Ravi,
As suggested by Inaki, you can use proxy communication in recever.
but you can also use the below
FILE -----> PI -------> PROXY
RFC
IDOC
to communicate to ECC system.
Regards
srinivas

How to load the data from .csv file to oracle table???

Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance

981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al

How to create a .mdf SQL Server database from a Data-Tier Application file that has data?

This is a noob question, though I do use SQL Server databases all the time with Entity Framework when I code in C# using Visual Studio 2013. The development environment is found below at [A]. I am trying to make a clone of a SQL Server 2008 R2
database (.mdf) that exists online. I can read, connect and work with this database in Visual Studio 2013, but I wish to make a local copy of the database, as an .MDF file. Somewhere in my notes I have a way of creating a local copy from
an online database when using Visual Studio but I forgot how (it seems, reviewing my notes, that it deals with ADO.NET which is deprecated in Visual Studio 2013 these days, or so it seems). So I'm looking for another way. What I did was create
(or export) a "Data-Tier Application File" from the online SQL Server database, with data, and it seems to have worked in that this Data-Tier Application file exists on my hard drive and seems to have data in it ("SQL Server Replication Snapshot"
is the format it seems). It contains skeleton code to create a database, but when I tried to execute it with SQL Server 2014 Management Studio, I got a bunch of errors.
So my question is:
1) Can I somehow create a .MDF SQL Server Database from an Data-Tier Application file that has data? What tool do I use? I saw this link, http://social.technet.microsoft.com/wiki/contents/articles/2639.how-to-use-data-tier-application-import-and-export-with-a-windows-azure-sql-database.aspx
and it relates to Azure, but is there a tool for C#Visual Studio 2013, standalone?
2) If there's an easy way to create a .mdf SQL Server Database file from an online file, within SQL Server Management Studio? I don't think so, since it would require Administrator permissions on the online server, which I don't have. I have permission
to read, update, delete the online database file, but strangely not to download it (the service I use has a tool for backup, but not for download).
3) same question as 2), but for Visual Studio 2013? I don't think so, since I notice none of the templates even mentions ADO.NET anymore, but instead they go with Entity Framework. Using EF I can of course do anything I want with the online database
(CRUD), but it remains online. Maybe there's a switch to make a local copy? I guess I could write a short program to suck all the data out of the online database and put it into a new, duplicate database having the same tables, that I create on
my localhost, but my question here is if there's an easier way than this, maybe a tool or command I can run from inside Visual Studio?
Any advice on any of the above questions is appreciated.
Thank you,
Paul
[A] Microsoft Visual Studio Professional 2013
Version 12.0.21005.1 REL
Microsoft .NET Framework
Version 4.5.51641
Microsoft Web Developer Tools 2013   2.0.40926.0
SQL Server Data Tools   12.0.30919.1
Microsoft SQL Server Data Tools
Windows Azure Mobile Services Tools   1.0
Windows Azure Mobile Services Tools

Thanks but these links are too general to help.
"2. what do you mean by online file?" - I mean the SQL Server database file is on a remote web server that I rent from, but I am not the administrator of. I can access my database using SQL Server Authentication, but nothing more.
Paul
What do you mean by too general? It explains on how you can use data tier application to create and deploy databases
May be this will help you to understand better
http://www.databasejournal.com/features/mssql/article.php/3911041/Creating-Data-Tier-Applications--in-SQL-Server-2008-R2.htm
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to download data into XLSX file in ABAP ECC 6.0 using FM: GUI_DOWNLOAD or any other FunctionModules

Hi ABAP Exterts,
Any one help on this , there is a requirement to download the data into XLSX file only.
I am able to to download the data into XLS file using the FM: GUI_DOWNLOAD in SAP ECC 6.0and also opening the file . But when i download the data into XLSX file . I am able to download the data into GUI_DOWNLOAD. But while opening the file i am getting the below mentioned error.
'Excel cannot open the file 'filename.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'
Ok buttom is coming not able to open the file.
When i use the FM: SAP_CONVERT_TO_XLS_FORMAT to download the XLS it self it is going abap DUMP that file type error.
Any one help any Function Module or how to download data through abap programing into XLSX file.
Thanks.
Murali.
Message was edited by: Matthew Billingham - adjusted wording...

If you want to download your ALV to an .XLXS format file, with all the formatting intact, please try the following code. I have tried to create a custom Function module Z_EXCEL_DOWNLOAD_TEST wherein I pass all the callback variables, the final ALV internal table and all the ALV details like field catalog, sort, layout, event list and so on, along with the concatenated file path and file name in I_FILE. I have used a custom class ZCL_SALVEXPORT_XML which is a copy of the standard class CL_SALV_EXPORT_XML_DIALOG, with few modifications in Method: EXECUTE and Method: DOWNLOAD. The methods where I have modified the code are also shown at the end.
****************Global declarations***********************
TYPE-POOLS: slis,
kkblo.
TYPES: t_fccls(1) TYPE c OCCURS 0.
TYPES: BEGIN OF ty_nosum,
fieldname     TYPE kkblo_fieldname,           "Field name
tabname       TYPE kkblo_tabname,             "Table name
fieldname_dep TYPE kkblo_fieldname,           "Field name
tabname_dep   TYPE kkblo_tabname,             "Table name
index         TYPE sy-index,                  "Index
END OF ty_nosum.
TYPES: t_nosum TYPE TABLE OF ty_nosum INITIAL SIZE 0 WITH NON-UNIQUE DEFAULT KEY.
TYPES: BEGIN OF ty_dep_field,
s_dep_fieldcat TYPE kkblo_fieldcat,            "Field cat
t_ref_fieldcat TYPE kkblo_t_fieldcat,          "Field cat
END OF ty_dep_field.
TYPES: BEGIN OF ty_ref_field,
s_ref_fieldcat TYPE kkblo_fieldcat,           "Field cat
s_dep_fieldcat TYPE kkblo_fieldcat,           "Field cat
END OF ty_ref_field.
TYPES: t_dep_field TYPE ty_dep_field OCCURS 0.        "
TYPES: t_ref_field TYPE ty_ref_field OCCURS 0.
TYPES: BEGIN OF ty_memory,
object(20) TYPE c,                        "Object
memcount(4) TYPE c,                        "count
END OF ty_memory.
*ALV Customer Wrapper
TYPES: BEGIN OF ty_type_header_info,
tabname   TYPE kkblo_tabname,            "Table name
fieldname TYPE kkblo_fieldname,          "Field name
sequence TYPE i,                        "Sequence
field     TYPE char80,                    "Field
pagno     TYPE sypagno,                   "Page num
linno     TYPE sy-linno,                  "Current Line in List
colno     TYPE sy-colno,                  "Current List Column
END   OF ty_type_header_info,
t_type_header_info TYPE SORTED TABLE OF ty_type_header_info
WITH UNIQUE KEY tabname fieldname.
TYPES: BEGIN OF ty_type_row_info,
tabname   TYPE kkblo_tabname,            "Table name
tabindex TYPE syindex,                  "Index
field     TYPE char80,                   "Field name
pagno     TYPE sypagno,                  "Page num
linno     TYPE sy-linno,                 "Current Line in List
colno     TYPE sy-colno,                 "Current List Column
END   OF ty_type_row_info,
t_type_row_info TYPE SORTED TABLE OF ty_type_row_info
WITH UNIQUE KEY tabname tabindex.
TYPES: BEGIN OF ty_type_sel_header,
tabname   TYPE kkblo_tabname,           "table name
fieldname TYPE kkblo_fieldname,         "field name
END   OF ty_type_sel_header,
t_type_sel_header TYPE SORTED TABLE OF ty_type_sel_header
WITH UNIQUE KEY tabname fieldname.
TYPES: BEGIN OF ty_type_sel_row,
tabname   TYPE kkblo_tabname,
tabindex TYPE syindex,
END   OF ty_type_sel_row,
t_type_sel_row TYPE SORTED TABLE OF ty_type_sel_row
WITH UNIQUE KEY tabname tabindex.
TYPES: BEGIN OF ty_type_sel_cell,
tabname   TYPE kkblo_tabname,
tabindex TYPE syindex,
fieldname TYPE kkblo_fieldname,
END   OF ty_type_sel_cell.
TYPES: BEGIN OF ty_type_selections,
t_row_info         TYPE t_type_row_info,
t_header_info      TYPE t_type_header_info,
t_selected_headers TYPE t_type_sel_header,
t_selected_rows    TYPE t_type_sel_row,
s_current_cell     TYPE ty_type_sel_cell,
set_headers        TYPE sap_bool,
set_rows           TYPE sap_bool,
set_current_cell   TYPE sap_bool,
END   OF ty_type_selections.
TYPES: BEGIN OF ty_stack3,
r_grid         TYPE REF TO cl_gui_alv_grid,        "Y6DK050176
r_salv_adapter TYPE REF TO if_salv_adapter,
s_selections   TYPE ty_type_selections,
r_print_state TYPE REF TO if_alv_print_parameter_proxy, "Y6DK075821
suppress_empty_data TYPE abap_bool,
END OF ty_stack3.
TYPES: t_stack3 TYPE ty_stack3 OCCURS 0.
TYPES: BEGIN OF ty_stack,
i_callback_program       TYPE sy-repid,
i_callback_user_command TYPE kkblo_formname,
i_callback_top_of_page   TYPE kkblo_formname,
i_callback_top_of_list   TYPE kkblo_formname,
i_callback_end_of_page   TYPE kkblo_formname,
i_callback_end_of_list   TYPE kkblo_formname,
i_callback_pf_status_set TYPE kkblo_formname,
i_callback_fieldcat_save TYPE kkblo_formname,
i_callback_layout_save   TYPE kkblo_formname,
i_tabname                TYPE kkblo_tabname,
i_tabname_slave          TYPE kkblo_tabname,
is_keyinfo               TYPE kkblo_keyinfo,
is_layout                TYPE kkblo_layout,
it_fieldcat              TYPE kkblo_t_fieldcat,
i_fctype(1)              TYPE c,
it_excluding             TYPE kkblo_t_extab,
it_special_groups        TYPE kkblo_t_sp_group,
it_sort                  TYPE kkblo_t_sortinfo,
it_except_qinfo          TYPE kkblo_t_qinfo,
is_sel_hide              TYPE kkblo_sel_hide,
t_columns                TYPE kkblo_t_columns,
t_filter                 TYPE kkblo_t_filter,
s_lprint                 TYPE kkblo_lprint,
print_line_break         TYPE char1,
t_isetab                 TYPE kkblo_seldis,
t_fccls                  TYPE t_fccls,
t_sfinfo                 TYPE kkblo_t_sfinfo,
t_ref_field              TYPE t_ref_field,
t_dep_field              TYPE t_dep_field,
flg_default_status(1)    TYPE c,
flg_selections           TYPE char1,
flg_allow_no_selection   TYPE char1,
flg_input                TYPE char1,
flg_called               TYPE char1,
flg_popup                TYPE char1,
flg_endlist              TYPE char1,
listtype                 TYPE char1,
actcols                  TYPE i,
is_list                  TYPE char1,
END OF ty_stack.
TYPES: t_stack TYPE ty_stack OCCURS 0.
TYPES: BEGIN OF ty_stack2,
button_col1(20)                TYPE c,
button_col2(20)                TYPE c,
button_col3(20)                TYPE c,
button_col4(20)                TYPE c,
button_col5(20)                TYPE c,
s_header                       TYPE kkblo_header,
t_sfinfo_slave                 TYPE kkblo_t_sfinfo,
t_suminfo                      TYPE kkblo_t_sfinfo,
t_sfsave                       TYPE kkblo_t_sfinfo,
t_nosum                        TYPE t_nosum,
window_title                   TYPE rsmpe-tittext, " Item_selection
flg_scroll_to_line(1)          TYPE c, " Item_selection
flg_top_of_page(1)             TYPE c,
flg_subtot(1)                  TYPE c,
flg_output_in_progress(1)      TYPE c,
flg_grouplevels(1)             TYPE c,
flg_groupedit(1)               TYPE c,
flg_calculate_totals(1)        TYPE c,
sumlevel                       TYPE sy-tabix,
memory_stack1                  TYPE ty_memory,
memory_stack2                  TYPE ty_memory,
memory_outtab                  TYPE ty_memory,
t_colmark                      TYPE kkblo_t_colmark,
t_rowmark                      TYPE kkblo_t_rowmark,
it_event_exit                  TYPE kkblo_t_event_exit,
t_groups                       TYPE kkblo_t_grouplevels,
t_filter_groups                TYPE kkblo_t_grouplevels,
s_subtot_options               TYPE kkblo_subtot_options,
flg_append_mode(1)             TYPE c,
is_reprep_id                   TYPE kkblo_reprep_id,
i_callback_before_line_output TYPE kkblo_formname,
i_callback_after_line_output   TYPE kkblo_formname,
i_callback_foreign_top_of_page TYPE kkblo_formname,
i_callback_foreign_end_of_page TYPE kkblo_formname,
i_callback_list_modify         TYPE kkblo_formname,
i_callback_top_of_coverpage    TYPE kkblo_formname,
i_callback_end_of_coverpage    TYPE kkblo_formname,
i_callback_grouplevel_change   TYPE kkblo_formname,
i_callback_item_data_expand    TYPE kkblo_formname,
i_callback_header_transport    TYPE kkblo_formname,
i_callback_reprep_sel_modify   TYPE kkblo_formname,
i_callback_subtotal_text       TYPE kkblo_formname,
END OF ty_stack2.
TYPES: t_stack2 TYPE TABLE OF ty_stack2 INITIAL SIZE 0.
** *--- iTables
DATA: it_stack TYPE t_stack WITH HEADER LINE.
DATA: it_stack2 TYPE t_stack2 WITH HEADER LINE.
***ALV Customer Wrapper
DATA: it_stack3 TYPE t_stack3 WITH HEADER LINE.
CONSTANTS: BEGIN OF c_con_listtype,
simple(1)    TYPE c VALUE 'S',
hier_sequ(1) TYPE c VALUE 'H',
matrix(1)    TYPE c VALUE 'M',
END OF c_con_listtype.
DATA:   gv_callback_program1      TYPE sy-repid,
gv_callback_user_command1 TYPE kkblo_formname,
gv_callback_top_of_page1 TYPE kkblo_formname,
gv_callback_top_of_list1 TYPE kkblo_formname,
gv_callback_end_of_page1 TYPE kkblo_formname,
gv_callback_end_of_list1   TYPE kkblo_formname,
gv_callback_pf_status_set1 TYPE kkblo_formname,
gv_callback_layout_save1    TYPE kkblo_formname,
gv_callback_fieldcat_save1 TYPE kkblo_formname,
gv_callback_grouplevel_change1 TYPE kkblo_formname,
gv_callback_before_line_otput1 TYPE kkblo_formname,
gv_callback_after_line_otput1 TYPE kkblo_formname,
gv_callback_foreign_top_of_pg1 TYPE kkblo_formname,
gv_callback_foreign_end_of_pg1 TYPE kkblo_formname,
gv_callback_list_modify1          TYPE kkblo_formname,
gv_callback_top_of_coverpge1     TYPE kkblo_formname,
gv_callback_end_of_coverpge1     TYPE kkblo_formname,
gv_callback_item_data_expand1     TYPE kkblo_formname,
gv_callback_header_transport1     TYPE kkblo_formname,
gv_callback_reprep_sel_modify1    TYPE kkblo_formname,
gv_callback_subtotal_text1       TYPE kkblo_formname,
gv_layout1   TYPE kkblo_layout,
gv_fieldcat1 TYPE kkblo_t_fieldcat,
gv_fctype1 TYPE c,
gv_event_exit1 TYPE kkblo_t_event_exit,
gv_excluding1   TYPE kkblo_t_extab,
gv_special_groups1 TYPE kkblo_t_sp_group,
gv_sort1 TYPE kkblo_t_sortinfo,
gv_filter1 TYPE kkblo_t_filter,
gv_except_qinfo1 TYPE slis_t_qinfo_alv,
gv_sel_hide1 TYPE slis_sel_hide_alv,
gv_reprep_id1   TYPE slis_reprep_id,
gv_screen_start_column1 TYPE i,
gv_salv_adapter1   TYPE REF TO if_salv_adapter,
gv_suppress_empty_data1 TYPE sap_bool.
FUNCTION z_excel_download_test.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_BYPASSING_BUFFER) TYPE CHAR01 OPTIONAL
*"     REFERENCE(I_BUFFER_ACTIVE) OPTIONAL
*"     REFERENCE(I_CALLBACK_PROGRAM) TYPE SY-REPID OPTIONAL
*"     REFERENCE(I_CALLBACK_USER_COMMAND) OPTIONAL
*"     REFERENCE(I_CALLBACK_TOP_OF_PAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_TOP_OF_LIST) OPTIONAL
*"     REFERENCE(I_CALLBACK_END_OF_PAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_END_OF_LIST) OPTIONAL
*"     REFERENCE(I_CALLBACK_PF_STATUS_SET) OPTIONAL
*"     REFERENCE(I_CALLBACK_LAYOUT_SAVE) OPTIONAL
*"     REFERENCE(I_CALLBACK_FIELDCAT_SAVE) OPTIONAL
*"     REFERENCE(I_CALLBACK_GROUPLEVEL_CHANGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_BEFORE_LINE_OUTPUT) OPTIONAL
*"     REFERENCE(I_CALLBACK_AFTER_LINE_OUTPUT) OPTIONAL
*"     REFERENCE(I_CALLBACK_FOREIGN_TOP_OF_PAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_FOREIGN_END_OF_PAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_LIST_MODIFY) OPTIONAL
*"     REFERENCE(I_CALLBACK_TOP_OF_COVERPAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_ITEM_DATA_EXPAND) OPTIONAL
*"     REFERENCE(I_CALLBACK_END_OF_COVERPAGE) OPTIONAL
*"     REFERENCE(I_CALLBACK_HEADER_TRANSPORT) OPTIONAL
*"     REFERENCE(I_CALLBACK_REPREP_SEL_MODIFY) OPTIONAL
*"     REFERENCE(I_CALLBACK_SUBTOTAL_TEXT) OPTIONAL
*"     REFERENCE(I_TABNAME) TYPE SLIS_TABNAME OPTIONAL
*"     REFERENCE(I_FCTYPE) DEFAULT 'R'
*"     REFERENCE(IT_EXCEPT_QINFO) TYPE SLIS_T_QINFO_ALV OPTIONAL
*"     REFERENCE(IS_SEL_HIDE) TYPE SLIS_SEL_HIDE_ALV OPTIONAL
*"     REFERENCE(IS_REPREP_ID) TYPE SLIS_REPREP_ID OPTIONAL
*"     REFERENCE(I_SCREEN_START_COLUMN) DEFAULT 0
*"     REFERENCE(I_OO_ALV) OPTIONAL
*"     REFERENCE(IR_SALV_ADAPTER) TYPE REF TO IF_SALV_ADAPTER OPTIONAL
*"     REFERENCE(I_SUPPRESS_EMPTY_DATA) TYPE SAP_BOOL DEFAULT
*"       ABAP_FALSE
*"     REFERENCE(I_FILE) TYPE STRING OPTIONAL
*"     REFERENCE(IT_FIELDCAT) TYPE SLIS_T_FIELDCAT_ALV OPTIONAL
*"     REFERENCE(IS_LAYOUT) TYPE SLIS_LAYOUT_ALV OPTIONAL
*"     REFERENCE(IT_SORT) TYPE SLIS_T_SORTINFO_ALV OPTIONAL
*"     REFERENCE(IT_FILTER) TYPE SLIS_T_FILTER_ALV OPTIONAL
*"     REFERENCE(IT_EXCLUDING) TYPE SLIS_T_EXTAB OPTIONAL
*"     REFERENCE(IT_SPECIAL_GROUPS) TYPE SLIS_T_SP_GROUP_ALV OPTIONAL
*"     REFERENCE(IS_KEYINFO) TYPE SLIS_KEYINFO_ALV OPTIONAL
*"     REFERENCE(IT_EVENT_EXIT) TYPE SLIS_T_EVENT_EXIT OPTIONAL
*"     REFERENCE(IS_LIST_SCROLL) TYPE SLIS_LIST_SCROLL OPTIONAL
*"     REFERENCE(IS_PRINT) TYPE SLIS_PRINT_ALV OPTIONAL
*"     REFERENCE(IS_LINEINFO) TYPE SLIS_LINEINFO OPTIONAL
*"     REFERENCE(I_REPID) TYPE SYREPID OPTIONAL
*" TABLES
*"      T_OUTTAB TYPE STANDARD TABLE OPTIONAL
*********** Local data declarations******************
DATA: gv_list TYPE char1.
DATA: gv_fcat_complete TYPE sap_bool.
DATA: gv_buffer_active TYPE char01,
wa_variant TYPE disvariant.
DATA: gv_controller TYPE REF TO cl_salv_export_c8r.
DATA: gv_xml           TYPE xstring.
DATA: gv_s_xml_choice TYPE if_salv_bs_xml=>s_type_xml_choice.
DATA: gv_t_xml_choice TYPE if_salv_bs_xml=>t_type_xml_choice.
DATA: gv_param_lvc TYPE if_salv_export=>s_type_param_lvc.
DATA: gv_data       TYPE REF TO data.
DATA: gv_result_data TYPE REF TO cl_salv_ex_result_data_table.
DATA: gv_flavour TYPE string.
DATA: gv_version TYPE string.
DATA:

Problem converting data in XML file to internal table data

Hi all,
I have a requirement. I need to convert an XML file to internal table data and based on that data do Goods Receipt in SAP.
With the help of this blog /people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I am able to convert the XML file to data in SAP. But this blog will display the output on screen as ELELEMNT = nodename VALUE= value of that node.
But I donu2019t want in that way, I want to store all the data in XML file in an internal table so that I can make use of those values and do Goods Recipt in SAP.
Can some one suggest how should I read the data in an internal table.
Here is my code..what changes should I make?
*& Report z_xit_xml_check
REPORT z_xit_xml_check.
TYPE-POOLS: ixml.
TYPES: BEGIN OF t_xml_line,
          data(256) TYPE x,
        END OF t_xml_line.
DATA: l_ixml            TYPE REF TO if_ixml,
        l_streamfactory   TYPE REF TO if_ixml_stream_factory,
        l_parser          TYPE REF TO if_ixml_parser,
        l_istream         TYPE REF TO if_ixml_istream,
        l_document        TYPE REF TO if_ixml_document,
        l_node            TYPE REF TO if_ixml_node,
        l_xmldata         TYPE string.
DATA: l_elem            TYPE REF TO if_ixml_element,
        l_root_node       TYPE REF TO if_ixml_node,
        l_next_node       TYPE REF TO if_ixml_node,
        l_name            TYPE string,
        l_iterator        TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table       TYPE TABLE OF t_xml_line,
        l_xml_line        TYPE t_xml_line,
        l_xml_table_size TYPE i.
DATA: l_filename        TYPE string.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'c:\temp\orders_dtd.xml'.
Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
START-OF-SELECTION.
Creating the main iXML factory
    l_ixml = cl_ixml=>create( ).
Creating a stream factory
    l_streamfactory = l_ixml->create_stream_factory( ).
    PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
wrap the table containing the file into a stream
    l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
                                                    size = l_xml_table_size ).
Creating a document
    l_document = l_ixml->create_document( ).
Create a Parser
    l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
Validate a document
    IF pa_val EQ 'X'.
      l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
    ENDIF.
Parse the stream
    IF l_parser->parse( ) NE 0.
      IF l_parser->num_errors( ) NE 0.
        DATA: parseerror TYPE REF TO if_ixml_parse_error,
              str        TYPE string,
              i          TYPE i,
              count      TYPE i,
              index      TYPE i.
        count = l_parser->num_errors( ).
        WRITE: count, ' parse errors have occured:'.
        index = 0.
        WHILE index < count.
          parseerror = l_parser->get_error( index = index ).
          i = parseerror->get_line( ).
          WRITE: 'line: ', i.
          i = parseerror->get_column( ).
          WRITE: 'column: ', i.
          str = parseerror->get_reason( ).
          WRITE: str.
          index = index + 1.
        ENDWHILE.
      ENDIF.
    ENDIF.
Process the document
    IF l_parser->is_dom_generating( ) EQ 'X'.
      PERFORM process_dom USING l_document.
    ENDIF.
*&      Form get_xml_table
FORM get_xml_table CHANGING l_xml_table_size TYPE i
                              l_xml_table      TYPE STANDARD TABLE.
Local variable declaration
    DATA: l_len      TYPE i,
          l_len2     TYPE i,
          l_tab      TYPE tsfixml,
          l_content TYPE string,
          l_str1     TYPE string,
          c_conv     TYPE REF TO cl_abap_conv_in_ce,
          l_itab     TYPE TABLE OF string.
    l_filename = pa_file.
upload a file from the client's workstation
    CALL METHOD cl_gui_frontend_services=>gui_upload
      EXPORTING
        filename   = l_filename
        filetype   = 'BIN'
      IMPORTING
        filelength = l_xml_table_size
      CHANGING
        data_tab   = l_xml_table
      EXCEPTIONS
        OTHERS     = 19.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Writing the XML document to the screen
    CLEAR l_str1.
    LOOP AT l_xml_table INTO l_xml_line.
      c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement = space ).
      c_conv->read( IMPORTING data = l_content len = l_len ).
      CONCATENATE l_str1 l_content INTO l_str1.
    ENDLOOP.
    l_str1 = l_str1+0(l_xml_table_size).
    SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
    WRITE: /.
    WRITE: /' XML File'.
    WRITE: /.
    LOOP AT l_itab INTO l_str1.
      REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
        l_str1 WITH space.
      WRITE: / l_str1.
    ENDLOOP.
    WRITE: /.
ENDFORM.                    "get_xml_table
*&      Form process_dom
FORM process_dom USING document TYPE REF TO if_ixml_document.
    DATA: node      TYPE REF TO if_ixml_node,
          iterator TYPE REF TO if_ixml_node_iterator,
          nodemap   TYPE REF TO if_ixml_named_node_map,
          attr      TYPE REF TO if_ixml_node,
          name      TYPE string,
          prefix    TYPE string,
          value     TYPE string,
          indent    TYPE i,
          count     TYPE i,
          index     TYPE i.
    node ?= document.
    CHECK NOT node IS INITIAL.
    ULINE.
    WRITE: /.
    WRITE: /' DOM-TREE'.
    WRITE: /.
    IF node IS INITIAL. EXIT. ENDIF.
create a node iterator
    iterator = node->create_iterator( ).
get current node
    node = iterator->get_next( ).
loop over all nodes
    WHILE NOT node IS INITIAL.
      indent = node->get_height( ) * 2.
      indent = indent + 20.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
        element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
          WRITE: / 'ELEMENT :'.
          WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
          IF NOT nodemap IS INITIAL.
          attributes
            count = nodemap->get_length( ).
            DO count TIMES.
              index = sy-index - 1.
              attr   = nodemap->get_item( index ).
              name   = attr->get_name( ).
              prefix = attr->get_namespace_prefix( ).
              value = attr->get_value( ).
              WRITE: / 'ATTRIBUTE:'.
              WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
                               value COLOR COL_TOTAL   INVERSE.
            ENDDO.
          ENDIF.
        WHEN if_ixml_node=>co_node_text OR
             if_ixml_node=>co_node_cdata_section.
        text node
          value = node->get_value( ).
          WRITE: / 'VALUE     :'.
          WRITE: AT indent value COLOR COL_GROUP INVERSE.
      ENDCASE.
    advance to next node
      node = iterator->get_next( ).
    ENDWHILE.
ENDFORM.                    "process_dom
Any help would be highly apperciated.
regards,
Jessica Sam

Pavel Vera,
With your example i tries doing the following .....
I tried to convert the data of XML file to internal table data. I am collecting the data in internal table to do goos recipt with that data.
Please find my XML file, ABAP pgm and XSLT pgm . I donu2019t know what I am missing I am not getting any output. I donu2019t know what is wrong please help me with this
Below is my XML file, My code and XSLT Program. In the below XML file I need to collect Vendor Number, Order Number, and Date tags which occur only once for one XML file.
I also need to collect the following tags from <Shipmentdetail>
<Shipmentdetail> has following child nodes and I need to collect them
TrackingNumber
Freight
Weight
ShipmentDate
ShipmentMethod
Need to collect to collect the following tags from <ProductInformation>
<ProductInformation> has following child nodes and I need to collect them
    LineNumber
    SKUNumber
    OrderedQuantity
    ShippedQuantity
    UOM
The <Shipmentdetail> and <ProductInformation> are child nodes of <OrderShipment>
The <Shipmentdetail> occurs only ones but the <ProductInformation> can occur once or many times and will be dynamic and differs depening on the input file.
My XML file is as follows
<?xml version="1.0" encoding="iso-8859-1" ?>
- <ShipmentHeader>
<AccountID />
- <OrderShipment>
      <VendorNumber>1000</VendorNumber>
      <OrderNumber>P00009238</OrderNumber>
      <OrderType>Stock</OrderType>
      <Company />
      <Division />
     <Department />
     <Date>20061120</Date>
     <CartonCount>2</CartonCount>
     <ShipAllProducts>No</ShipAllProducts>
-             <ShipmentDetail>
                  <TrackingNumber>1ZR3W891PG47477811</TrackingNumber>
                  <Freight>000000010000</Freight>
                  <ShipmentDate>20061120</ShipmentDate>
                  <ShipmentMethod>UPS1PS</ShipmentMethod>
             </ShipmentDetail>
-            <ProductInformation>
                 <LineNumber>000000001</LineNumber>
                 <SKUNumber>110FR</SKUNumber>
                 <AdvSKUNumber>003 4518</AdvSKUNumber>
                 <SKUID />
                 <OrderedQuantity>00000001000000</OrderedQuantity>
                 <ShippedQuantity>00000001000000</ShippedQuantity>
                 <UOM>EA</UOM>
                 <Factor>1</Factor>
            </ProductInformation>
-           <ProductInformation>
                <LineNumber>000000002</LineNumber>
                <SKUNumber>938EN</SKUNumber>
                <AdvSKUNumber>001 7294</AdvSKUNumber>
                <SKUID />
                <OrderedQuantity>00000000450000</OrderedQuantity>
                <ShippedQuantity>00000000450000</ShippedQuantity>
                <UOM>EA</UOM>
                <Factor>1</Factor>
            </ProductInformation>
-           <CaseInformation>
               <LineNumber>000000001</LineNumber>
               <SKUNumber>110FR</SKUNumber>
               <AdvSKUNumber>003 4518</AdvSKUNumber>
               <SKUID />
               <SSCCNumber>00000001668000002487</SSCCNumber>
               <CaseQuantity>00000001000000</CaseQuantity>
               <UOM>EA</UOM>
               <Factor>1</Factor>
             </CaseInformation>
             <CaseInformation>
               <LineNumber>000000001</LineNumber>
               <SKUNumber>110FR</SKUNumber>
               <AdvSKUNumber>003 4518</AdvSKUNumber>
               <SKUID />
               <SSCCNumber>00000001668000002487</SSCCNumber>
               <CaseQuantity>00000001000000</CaseQuantity>
               <UOM>EA</UOM>
               <Factor>1</Factor>
             </CaseInformation>
- </OrderShipment>
</ShipmentHeader>
My Program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\temp\test.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ts_shipment,
         VendorNumber(10)     TYPE n,
         OrderNumber(20)      TYPE n,
         OrderType(8)         TYPE c,
         Date(8)              TYPE c,
       END OF ts_shipment.
TYPES: BEGIN OF ts_shipmentdetail,
         TrackingNumber(30)     TYPE n,
         Freight(12)            TYPE n,
         Weight(14)             TYPE n,
         ShipmentDate(8)        TYPE c,
         ShipmentMethod(8)      TYPE c,
         END OF ts_shipmentdetail.
TYPES: BEGIN OF ts_productinformation,
         LineNumber(9)          TYPE n,
         SKUNumber(20)          TYPE c,
         OrderedQuantity(14)    TYPE n,
         ShippedQuantity(14)    TYPE n,
         UOM(4)                 TYPE c,
         END OF ts_productinformation.
* Table for the XML content
DATA: gt_itab       TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_shipment               TYPE STANDARD TABLE OF ts_shipment,
      gs_shipment               TYPE ts_shipment.
DATA: gt_shipmentdetail         TYPE STANDARD TABLE OF ts_shipmentdetail,
      gs_shipmentdetail         TYPE ts_shipmentdetail.
DATA: gt_productinformation     TYPE STANDARD TABLE OF ts_productinformation,
      gs_productinformation     TYPE ts_productinformation.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
      gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex     TYPE REF TO cx_root,
      gs_var_text   TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename                = gs_file
CHANGING
    data_tab                = gt_itab
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPMENT".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPMENT'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPDET".
GET REFERENCE OF gt_shipmentdetail INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPDET'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPRODDET".
GET REFERENCE OF gt_productinformation INTO gs_result_xml-value.
gs_result_xml-name = 'IPRODDET'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
    CALL TRANSFORMATION z_xml_to_abap3
    SOURCE XML gt_itab
    RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
    gs_var_text = gs_rif_ex->get_text( ).
    MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Writing the data from file for gt_shipment
*Collecting the Shipping Data from the XML file to internal table gt_shipment
*and writing the data to the screen
LOOP AT gt_shipment INTO gs_shipment.
WRITE: / 'VendorNumber:', gs_shipment-VendorNumber.
WRITE: / 'OrderNumber :', gs_shipment-OrderNumber.
WRITE: / 'OrderType :', gs_shipment-OrderType.
WRITE: / 'Date :',      gs_shipment-Date.
WRITE : /.
ENDLOOP. "gt_shipment.
LOOP AT gt_shipmentdetail INTO gs_shipmentdetail.
WRITE: / 'TrackingNumber:',     gs_shipmentdetail-TrackingNumber.
WRITE: / 'Freight :',           gs_shipmentdetail-Freight.
WRITE: / 'Weight :',           gs_shipmentdetail-Weight.
WRITE: / 'ShipmentDate :',     gs_shipmentdetail-ShipmentDate.
* WRITE: / 'ShipmentMethod :'    gs_shipmentdetail-ShipmentMethod
WRITE : /.
ENDLOOP. "gt_shipmentdetail.
LOOP AT gt_productinformation INTO gs_productinformation.
WRITE: / 'LineNumber:',         gs_productinformation-LineNumber.
WRITE: / 'SKUNumber :',         gs_productinformation-SKUNumber.
WRITE: / 'OrderedQuantity :', gs_productinformation-OrderedQuantity.
WRITE: / 'ShippedQuantity :', gs_productinformation-ShippedQuantity.
WRITE: / 'UOM :',              gs_productinformation-UOM.
WRITE : /.
ENDLOOP. "gt_productinformation.
XSLT Program
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <ISHIPMENT>
          <xsl:apply-templates select="//OrderShipment"/>
        </ISHIPMENT>
      </asx:values>
    </asx:abap>
</xsl:template>
<xsl:template match="OrderShipment">
    <item>
      <VENDORNUMBER>
        <xsl:value-of select="VendorNumber"/>
      </VENDORNUMBER>
      <ORDERNUMBER>
        <xsl:value-of select="OrderNumber"/>
      </ORDERNUMBER>
      <ORDERTYPE>
        <xsl:value-of select="OrderType"/>
      </ORDERTYPE>
      <DATE>
        <xsl:value-of select="Date"/>
      </DATE>
    </item>
</xsl:template>
<xsl:template match="/">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <ISHIPDET>
          <xsl:apply-templates select="//OrderShipment/ShipmentDetail"/>
        </ISHIPDET>
      </asx:values>
    </asx:abap>
</xsl:template>
<xsl:template match="ShipmentDetail">
    <item>
      <TRACKINGNUMBER>
        <xsl:value-of select="TrackingNumber"/>
      </TRACKINGNUMBER>
      <FREIGHT>
        <xsl:value-of select="Freight"/>
      </FREIGHT>
      <SHIPMENTDATE>
        <xsl:value-of select="ShipmentDate"/>
      </SHIPMENTDATE>
      <SHIPMENTMETHOD>
        <xsl:value-of select="ShipmentMethod"/>
      </SHIPMENTMETHOD>
    </item>
</xsl:template>
</xsl:transform> .
Any help is highly appreciated. If anyone encountered this situation before please let me know where i am going wrong in my XSLT transformation.
Any Help will be highly apppreciated. Thanks in advance
Regards,
Jessica   Sam

How do you import data base dmp file in oracle 10g

How do you run data base dmp file in oracle 10g

Examples..
Table Exports/Imports
The TABLES parameter is used to specify the tables that are to be exported. The following is an example of the table export and import syntax:
expdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=expdpEMP_DEPT.log
impdp scott/tiger@db10g tables=EMP,DEPT directory=TEST_DIR dumpfile=EMP_DEPT.dmp logfile=impdpEMP_DEPT.log
For example output files see expdpEMP_DEPT.log and impdpEMP_DEPT.log.
The TABLE_EXISTS_ACTION=APPEND parameter allows data to be imported into existing tables.
Schema Exports/Imports
The OWNER parameter of exp has been replaced by the SCHEMAS parameter which is used to specify the schemas to be exported. The following is an example of the schema export and import syntax:
expdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=expdpSCOTT.log
impdp scott/tiger@db10g schemas=SCOTT directory=TEST_DIR dumpfile=SCOTT.dmp logfile=impdpSCOTT.log
For example output files see expdpSCOTT.log and impdpSCOTT.log.
Database Exports/Imports
The FULL parameter indicates that a complete database export is required. The following is an example of the full database export and import syntax:
expdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=expdpDB10G.log
impdp system/password@db10g full=Y directory=TEST_DIR dumpfile=DB10G.dmp logfile=impdpDB10G.log

Data required in file

Similar Messages

Maybe you are looking for