Database Access Denied

I am having a problem connecting to my database. I have a
database in MySQL called vc_rsvp. I logged into the coldfusion
administrator and connected to the database. It connects perfectly
without any error, the verify says ok but when I open a .cfm
webpage that reads the database it gives me a error saying
SELECT command denied to user 'vc_rsvp'@'localhost' for table
'events'
I know user name vc_rsvp exists for this database and has
access to it. What can I do to verify everything is setup
correctly? Coldfusion see's the database and connects fine however
my .cfm page doesnt. Thanks
Todd

If your cfquery uses username/password attributes, remove
them. If it doesn't, then include them (as a test; they're
optional).

Similar Messages

I receive "Database access denied" when trying to add component 4543BD

I receive "Database access denied" when trying to add component 4543BD to my schematic. This component was added from a previous version. I'm using Multisim version 12.0.0 Student edition.
Solved!
Go to Solution.

Hi Diarra,
I checked my database and the 4543 is not in the Student Edition. If you opened a schematic that was created in a higher version such as the Educaiton Edition and copied the part to your database, when you place this part you will get the access denied message.
Attached is a schematic with the part, you can open it and build you circuit around it.
Tien P.
National Instruments
Attachments:
4543.ms12 ‏62 KB

Database access denied for MCT6 in Multisim 10 Student Edition

I am getting this error for a component that I was able to use over the
last few days. The component is the MCT6 optocoupler.
Luckily I had
saved an older version of my circuit, or I would be screwed.
I am using
Multisim Student Edition Version 10.0.267 on Windows XP Pro SP 2 with all updates.
I found the documentation on what parts are available for the student edition.
According to the list, the MCT6 optocoupler should be available.
I've
tried removing and reinstalling the product 3 times. The last time, I went into
the registry and removed everything related to National
Instruments.
Nothing has worked. Why is this happening?
Thanks,
Melissa
P.S.
I'm still
getting the OLE error from this post:
http://forums.ni.com/ni/board/message?board.id=370&message.id=549&query.id=328361#M549
Message Edited by melissa on 06-03-2007 06:27 PM

Melissa, this is the same response as for the post you placed on the LabVIEW board.
So I found the error, the component database the flag used to indicate whether a component belongs to a particular tier or not is incorrectly set in that component, the MCT6, according to our datasheet it is supposed to be included in the Student Edition. I will report this immediately to R&D, but in the meantime... I created a new component for you, its the same component but you should be able to add it to your user database.
Download the attached PRZ file, open Multisim, and go to File >> Open, point to this file, it will prompt you to add it to your user database, accept all the default questions and click Start, once its done, exit the dialog. Your component should appear on Place >> Component... select User Database... I think I configured it to be on the same place... Misc >> OPTOCOUPLERS... check it out.
Nestor
National Instruments
Attachments:
MCT6.prz ‏282 KB

Applet database connection : access denied

Connections to my MySql database can only made from applications running on the host. So when I log on to my domain and run a Java application from the console, I can talk to the database. There's no problem with php either. But when I upload an applet, I get an access denied.
Anyone knows how to get around this problem?

Change MySQL so that it will accept connections from users running on whatever system the applet is running on.

ORA-31050:Access denied when trying enabling the database-native Web servic

Dear all,
I'm trying to follow the instruction of OBE about "Using Oracle XML DB Web Services for Service-Oriented Architecture " as this url http://st-curriculum.oracle.com/obe/db/11g/r1/prod/datamgmt/xmldb2_b/xmldb2_b.htm#http .
I would like to enable the database-native Web service end point in Oracle XML DB and I already execute the script to create Web Service Endpoint.
Anyway, I got the following error.
ORA-31050: Access denied
ORA-06512: at "XDB.DBMS_XDB", line 528
ORA-06512: at "SYSTEM.ADDSERVLETMAPPING", line 91
I found that this procedure was created on system schema but the problem occur when I tried to call ADDSERVLETMAPPING procedure.
This is a code that I used to enable.
set pagesize 100
set linesize 132
set long 20000
set echo on
-- conn sys/oracle as sysdba
create or replace procedure addServletMapping (pattern varchar2,
servletname varchar2,
dispname varchar2,
servletclass varchar2,
servletschema varchar2,
language varchar2,
description varchar2,
securityRole xmltype) as
xdbconfig xmltype;
begin
xdbconfig := dbms_xdb.cfg_get();
select deleteXML
xdbconfig,
'/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-list/servlet[servlet-name="' || servletname || '"]'
into xdbconfig
from dual;
if (language = 'C') then
select insertChildXML
xdbconfig,
'/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-list',
'servlet',
xmlElement
"servlet",
xmlAttributes('http://xmlns.oracle.com/xdb/xdbconfig.xsd' as "xmlns"),
xmlForest
servletname as "servlet-name",
language as "servlet-language",
dispname as "display-name",
description as "description"
securityRole
into xdbconfig
from dual;
else
select insertChildXML
xdbconfig,
'/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-list',
'servlet',
xmlElement
"servlet",
xmlAttributes('http://xmlns.oracle.com/xdb/xdbconfig.xsd' as "xmlns"),
xmlForest
servletname as "servlet-name",
language as "servlet-language",
dispname as "display-name",
description as "description",
servletclass as "servlet-class",
servletschema as "servlet-schema"
into xdbconfig
from dual;
end if;
select deleteXML
xdbconfig,
'/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-mappings/servlet-mapping[servlet-name="' || servletname || '"]'
into xdbconfig
from dual;
select insertChildXML
xdbconfig,
'/xdbconfig/sysconfig/protocolconfig/httpconfig/webappconfig/servletconfig/servlet-mappings',
'servlet-mapping',
xmltype
'<servlet-mapping xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd">
<servlet-pattern>'||pattern||'</servlet-pattern>
<servlet-name>'||servletname||'</servlet-name>
</servlet-mapping>'
into xdbconfig
from dual;
xdb.dbms_xdb.cfg_update(xdbconfig);
end;
call addServletMapping(
'/orawsv/*',
'orawsv',
'Oracle Query Web Service',
null,
null,
'C',
'Web Services Servlet',
xmltype(
'<security-role-ref>
<role-name>XDB_WEBSERVICES</role-name>
<role-link>XDB_WEBSERVICES</role-link>
</security-role-ref>'
call addServletMapping(
'/orawsdl/*',
'orawsdl',
'Oracle WSDLs',
null,
null,
'C',
'WSDL Servlet',
xmltype(
'<security-role-ref>
<role-name>XDB_WEBSERVICES</role-name>
<role-link>XDB_WEBSERVICES</role-link>
</security-role-ref>'
--grant XDB_WEBSERVICES to oe
grant XDB_WEBSERVICES to TESTDB
-- For 11g only
--grant XDB_WEBSERVICES_OVER_HTTP to oe
grant XDB_WEBSERVICES_OVER_HTTP to TESTDB
--grant XDB_WEBSERVICES_WITH_PUBLIC to oe
grant XDB_WEBSERVICES_WITH_PUBLIC to TESTDB
-- Clean up afterward
drop procedure addServletMapping
Regards,
Zenoni
Edited by: zenoni on Jan 28, 2011 10:18 AM

Test if you can access the generic WSDL using a browser
http://server:port/orawsv?wsdlYou should get prompted for a username and password. If you provide the username and password of a database user who was been granted the Web Services Roles you should see the query service WSDL
<definitions name="orawsv" targetNamespace="http://xmlns.oracle.com/orawsv"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:tns="http://xmlns.oracle.com/orawsv"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://schemas.xmlsoap.org/wsdl/ http://schemas.xmlsoap.org/wsdl/">
<types>
<xsd:schema
        targetNamespace="http://xmlns.oracle.com/orawsv"
   elementFormDefault="qualified">
   <xsd:element name="query">
    <xsd:complexType>
     <xsd:sequence>
      <xsd:element name="DDL_text" type="xsd:string"
       minOccurs="0" maxOccurs="unbounded" />
      <xsd:element name="query_text">
       <xsd:complexType>
        <xsd:simpleContent>
         <xsd:extension base="xsd:string">
          <xsd:attribute name="type">
           <xsd:simpleType>
            <xsd:restriction base="xsd:NMTOKEN">
             <xsd:enumeration value="SQL" />
             <xsd:enumeration value="XQUERY" />
            </xsd:restriction>
           </xsd:simpleType>
          </xsd:attribute>
         </xsd:extension>
        </xsd:simpleContent>
       </xsd:complexType>
      </xsd:element>
      <xsd:choice minOccurs="0" maxOccurs="unbounded">
       <xsd:element name="bind">
        <xsd:complexType>
         <xsd:simpleContent>
          <xsd:extension base="xsd:string">
           <xsd:attribute name="name" type="xsd:string" />
          </xsd:extension>
         </xsd:simpleContent>
        </xsd:complexType>
       </xsd:element>
       <xsd:element name="bindXML">
        <xsd:complexType>
         <xsd:sequence>
          <xsd:any/>
         </xsd:sequence>
        </xsd:complexType>
       </xsd:element>
      </xsd:choice>
      <xsd:element name="null_handling" minOccurs="0">
       <xsd:simpleType>
        <xsd:restriction base="xsd:NMTOKEN">
         <xsd:enumeration value="DROP_NULLS" />
         <xsd:enumeration value="NULL_ATTR" />
         <xsd:enumeration value="EMPTY_TAG" />
        </xsd:restriction>
       </xsd:simpleType>
      </xsd:element>
      <xsd:element name="max_rows" type="xsd:positiveInteger" minOccurs="0"/>
      <xsd:element name="skip_rows" type="xsd:positiveInteger" minOccurs="0"/>
      <xsd:element name="pretty_print" type="xsd:boolean" minOccurs="0"/>
      <xsd:element name="indentation_width" type="xsd:positiveInteger" minOccurs="0"/>
      <xsd:element name="rowset_tag" type="xsd:string" minOccurs="0"/>
      <xsd:element name="row_tag" type="xsd:string" minOccurs="0"/>
      <xsd:element name="item_tags_for_coll" type="xsd:boolean" minOccurs="0"/>
     </xsd:sequence>
    </xsd:complexType>
   </xsd:element>
   <xsd:element name="queryOut">
    <xsd:complexType>
     <xsd:sequence>
      <xsd:any/>
     </xsd:sequence>
    </xsd:complexType>
   </xsd:element>
</xsd:schema>
</types>
<message name="QueryInput">
   <part name="body" element="tns:query"/>
</message>
<message name="XMLOutput">
   <part name="body" element="tns:queryOut"/>
</message>
<portType name="ORAWSVPortType">
   <operation name="XMLFromQuery">
    <input message="tns:QueryInput"/>
    <output message="tns:XMLOutput"/>
   </operation>
</portType>
<binding name="ORAWSVBinding" type="tns:ORAWSVPortType">
   <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
   <operation name="XMLFromQuery">
    <soap:operation soapAction="http://localhost/orawsv"/>
    <input>
     <soap:body use="literal"/>
    </input>
    <output>
     <soap:body use="literal"/>
    </output>
   </operation>
</binding>
<service name="ORAWSVService">
   <documentation>Oracle Web Service</documentation>
   <port name="ORAWSVPort" binding="tns:ORAWSVBinding">
    <soap:address location="http://localhost/orawsv"/>
   </port>
</service>
</definitions>Edited by: mdrake on Jan 27, 2011 8:42 PM

SharePoint 2010 - Claims Based Authentication - Access Denied for AD Group members

We're in the process of migrating our SharePoint 2003 system to 2010 and have used Metavis to migrate the data. We had to do the data migration in a lab environment and then move/attach the content database to our production server. The database attached successfully
and I, as a site collection administrator, can see all sites and the data therein. We are using claims-based auth with ADFS 2.0 as the provider.
My users, however, get access denied trying to go anywhere on the site. I have added the Active Directory groups to the appropriate SharePoint groups and have confirmed the groups are appearing with the c:0-.t|adfs|group_name syntax. If I add them as individual
users (i:05.t|adfs|[email protected]) they can authenticate fine, but not by AD group membership.
I enabled ADFS tracing and I see that the claim being provided includes the SIDs for all the groups the user belongs to. Using ULS Viewer I can see that SharePoint sees the correct number of claims (it doesn't show what those claims are, just the number) but
it doesn't seem to be connecting the SIDs passed to the group name used in the permissions list. I have also updated the portalsuperreader and portalsuperuser accounts after the database was moved, just in case there was something weird there.
The ADFS and SharePoint servers are all in the same AD domain, so they should be able to resolve SIDs ok. I suspect the issue is somehow related to the migration of the content database from a separate
environment (different domain), but I can't figure out for the life of me how to get the group authentication to work.
Thoughts?

Brilliant idea. Unfortunately that didn't work - I can get to the new site as the site collection owner, but members of groups to which I assigned permissions still get Access Denied. :-(

Crystal report viewer 2.0.23 access denied

Post Author: gionnyDeep
CA Forum: General
hi all
I'm using CR viewer 2.0.23 in a java standalone apllication.Actually whe i try to open a CR XI report with CR viewer 2.0.23 i get Access denied.
It look like CR viewer does not fetch login information to database by the report.
I found a work aroud but sometimes works and sometimes does not! I set for each table of my report db login and db password as follow:
DatabaseController dc= rc.getDatabaseController(); Tables tables = dc.getDatabase().getTables(); for (int i = 0; i < tables.size(); i++) { ITable table = tables.getTable(i); IConnectionInfo connectionInfo = table.getConnectionInfo(); String userName=table.getConnectionInfo().getUserName(); String password=table.getConnectionInfo().getPassword(); connectionInfo.setUserName(userName); connectionInfo.setPassword(password); connectionInfo.setKind(ConnectionInfoKind.SQL); table.setConnectionInfo(connectionInfo); dc.setTableLocation(table, tables.getTable(i)); }
The problem is that it works just with reports created with CR XI.If i use a report created with CR 9 or 10 and i save this report with CR XI.And after that i open my report in CR viewer 2.0.23 sometimes it works sometimese does not.I got Access denied!!!!

Post Author: gionnyDeep
CA Forum: General
hi all
I'm using CR viewer 2.0.23 in a java standalone apllication.Actually whe i try to open a CR XI report with CR viewer 2.0.23 i get Access denied.
It look like CR viewer does not fetch login information to database by the report.
I found a work aroud but sometimes works and sometimes does not! I set for each table of my report db login and db password as follow:
DatabaseController dc= rc.getDatabaseController(); Tables tables = dc.getDatabase().getTables(); for (int i = 0; i < tables.size(); i++) { ITable table = tables.getTable(i); IConnectionInfo connectionInfo = table.getConnectionInfo(); String userName=table.getConnectionInfo().getUserName(); String password=table.getConnectionInfo().getPassword(); connectionInfo.setUserName(userName); connectionInfo.setPassword(password); connectionInfo.setKind(ConnectionInfoKind.SQL); table.setConnectionInfo(connectionInfo); dc.setTableLocation(table, tables.getTable(i)); }
The problem is that it works just with reports created with CR XI.If i use a report created with CR 9 or 10 and i save this report with CR XI.And after that i open my report in CR viewer 2.0.23 sometimes it works sometimese does not.I got Access denied!!!!

Financial Reporting 11.1.1.3 Client "Access Denied" connecting to HFM

Hi,
I have installed Financial Reporting 11.1.1.3 Client on a PC running Windows Vista 32 bit SP1. When I try to access to a report created form another PC that connects to HFM, it says "Error connectiong to server" and "Cannot connect to database "X": Access Denied". The native user is the same that created the report; on the same machine, I can succesfully access HFM applications from HFM client and Rule editor.
Any idea?
Thanks

Dear John,
How to install latest Version of Hyperion HFM
1) I had downloaded Hyperion Enterprise Performance Management System Foundation Services, Product specific Essabase and Financial Management , and unzip into common folder . but stll iam not able to see Installtool.cmd
which part i have still dowloaded.
Regards
Amit

Unable to Open Project Site Access Denied Issue (Project Manager)

Hi
We got an issue that one project manager is having 12 projects, in that she can able to view 5 projects-- project sites but remaining 7 projects --- she is not able to open the project site (access denied) error is throwing when she try to open.
She is the project manager of the 12 projects and having project manager permissions on the project sites.
Please suggest any solution for this.
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

I believe I've found the fix for this issue. After opening a ticket with MS support and not getting anywhere with this issue I decided to do an in-depth review of all the Project and SharePoint 2013 CU's starting with December 2013 to September 2014.
To my amazement buried inside the July 2014 CU was a hotfix for this issue described almost word for word. (I will list all the relevant KB's at the end) I contacted my support engineer inquiring about this hotfix and he stated it wasn't relevant because
the "Synchronize Project Web App permissions to Project Site" was not failing or even generating any warnings in our Prod or Test environments. I stated that is not always an indicator as ULS doesn't always catch all relevant errors.
I informed him that I also found a second hotfix pertaining to the same issue released August 2014, apparently the first hotfix in July didn't totally resolve the issue and a second hotfix was released. He was adamant that this would not resolve
our issue and he requested or production databases because he was unable to replicate the issue in his test environment. The reason, you may wonder, is because he was at a higher patch level that our farm.... Obviously! His farm had the most current
CU which included the hotfixes from July and August. Apparently he didn't see the flaw in his logic.
I decided to install the September CU on our test farm. Low and behold that fixed the problem, even though MS support stated the hotfix was not relevant to our issue. I learned a long time ago to take MS support comments as suggestions instead
of gospel truth, this isn't the first time they have confidently given me erroneous information.
We are currently doing further testing to verify that this CU didn't break something else. Unfortunately these rollups are not GA and Microsoft is very clear that you should only install them if the hotfixes pertain directly to your issue.
Finding the hotfixes was a chore as Microsoft loves to create multiple KB's for the same thing and then nest (bury) them so you have to dig through four or five KB's to find the relevant fix. I'll save you the trouble and list them below.
Watch the
September CU Webcast Brian Smith and team go into depth explaining why this issue has been happening and how they fixed it.
September 2014 CU http://support.microsoft.com/kb/2882990 (the one I installed)
August 2014 CU https://support.microsoft.com/kb/2989078
August Project site sync hotfix
https://support2.microsoft.com/kb/2883083
July 2014 CU http://support.microsoft.com/kb/2882990
July Project Site Sync hotfix http://support2.microsoft.com/kb/2882995
Microsoft Project Server Blog
http://blogs.technet.com/b/projectsupport/ (I find this to be more helpful than the TechNet site)
Frank Miranda Florida Hospital MIS

Error...java.sql.SQLException:Access denied for user

Hi,
I am getting the following error message while connecting with the MySQL .(O/S :Sun OS 5.6)
Error.....java.sql.SQLException: Invalid authorization specification: Access denied for user: 'some_user&password@localhost' (Using password: NO)
Note that i have given all permission to the user using,
GRANT ALL PRIVILEGES .......................
The code i have used to connect with the database is,
import java.io.*;
import java.sql.*;
class test
public static void main(String a[])
try
Connection con;
Statement stmt;
ResultSet rs;
Class.forName("org.gjt.mm.mysql.Driver");
con=DriverManager.getConnection(jdbc:mysql://localhost/db_name?user=some_user&password=some_pass");
stmt=con.createStatement();
//do something with resultset
catch(Exception e)
System.out.println("Exception in second try.."+e);
plese guide me on this problem to solve.
Thankz,
Bala.

Hi friends...
I've read the last post...
The problem that I have is as follow....
1. I have installed on my machine MySQL 5.0 Server running
1.1 I have a database called "base1"
1.2 User "root", password "works"
1.3 I have the following sentence to connect it using JDBC
Connection con = DriverManager.getConnection("jdbc:mysql://localhost/base1", "root", "works");
More notes:
- I use the JDBC 5.0
- My Machine is a Windows XP SP2 Pentium 3.0 512Mb
and it connects��
but I have this environment to develop applications, now that I want to connect to Production Environment happens the following:
2 The Production database is mounted on a Linux Server with MySQL 3.2.
2.1 I change the sentences as follow:
Connection con = DriverManager.getConnection("jdbc:mysql://192.168.0.7/base1", "user", "password");
2.3 But a message appears when I run the Java Program:
java.sql.SQLException:Access denied for user: '[email protected]' (Using password: YES)
2.4 As you can see it changes the IP Address...
More notes:- I have the MySQL Query Browser and I got connection.
- The IP that display the Error Message is my Second IP configurated on my Network Properties.
- Server is a Pentium 4 3.0 GHz 2Gb Linux Red Hat 3.0
I leave this case for the spider... I hope that somebady has the solution.
What is the problem? Why the JDBC doesn't respect the IP that I wrote.

Access Denied Web Application with Claims authentication NTLM only when using secondary URL

I have a SharePoint 2010 server farm with 2 web front ends, an application server and a database server. Both front ends are internal to
our network and are not behind a load balancer.
NOTE THAT I HAD TO SUBSTITUTE hzzp with hzzp so that I had no links in the body of this post since I am not verified
I setup a new web application called "SharePoint 41171" with:
Public URL:
hzzp://testserver1:41171
Claims authentication
NTLM only: no forms auth
No SSL
New web site "SharePoint 41171"
New app pool
New content database
I create a top level site collection and name mydomain\myusername as the primary site collection admin
I am able to access this site as expected at
hzzp://testserver1:41171 with the aforementioned site collection owner id: mydomain\myusername
I add an alternate access mapping for a secondary URL for this web application in the Intranet zone:
hzzp://iwatest.mydomain.com
So my AAMs for the site read as:
hzzp://testserver1:41171
Default     hzzp://testserver1:41171
hzzp://iwatest.mydomain.com
Intranet     hzzp://iwatest.mydomain.com
When I attempt to log on to
hzzp://iwatest.mydomain.com with the same user name and password, I get "access denied".
I can access this site using
hzzp://iwatest.mydomain.com if I log in as the farm account. This is the only account that seems to work.
Side Note: If I create a separate web application without claims - just NTLM and create the same AAMs, I can login fine with the same secondary
URL and the same user name
IP address properly maps to this machine.
I reviewed the ULS logs and find the following:
10/30/2012 16:20:23.45              w3wp.exe (0x0E78)
                0x1724       SharePoint Foundation              Monitoring
                nasq                        Medium Entering
monitored scope (Request (GET:hzzp://iwatest.mydomain.com:80/_layouts/AccessDenied.aspx?Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom))
10/30/2012 16:20:23.45              w3wp.exe (0x0E78)
                0x1724       SharePoint Foundation              Logging Correlation Data
      xmnv                        Medium Name=Request (GET:hzzp://iwatest. mydomain.com:80/_layouts/AccessDenied.aspx?Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom)
8f313b5e-8476-4dd4-9abe-0cb6dbe024b6
10/30/2012 16:20:23.45              w3wp.exe (0x0E78)
                0x1724       SharePoint Foundation              Logging Correlation Data
      xmnv                        Medium Site=/          8f313b5e-8476-4dd4-9abe-0cb6dbe024b6
10/30/2012 16:20:23.45              w3wp.exe (0x0E78)
                0x1724       SharePoint Foundation              General
                   8e2s                        Medium
Unknown SPRequest error occurred. More information: 0x80070005       8f313b5e-8476-4dd4-9abe-0cb6dbe024b6
10/30/2012 16:20:23.45              w3wp.exe (0x0E78)
                0x1724       SharePoint Foundation              Monitoring
                b4ly                        Medium Leaving
Monitored Scope (Request (GET:hzzp://iwatest.mydomain.com:80/_layouts/AccessDenied.aspx?Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom)). Execution Time=8.66003919492561   8f313b5e-8476-4dd4-9abe-0cb6dbe024b6
Basically it tells me that access is denied. I didnt see anything that stood out here.
I found this article:
hzzp://social.technet.microsoft.com/Forums/en-US/sharepointadminprevious/thread/ded9188b-ee03-4ef0-bb50-3ad138110e0c, which pointed me in the direction of ensuring that the portal
super user and portal reader accounts were properly added to my web application. I followed the every popular article on doing this:
hzzp://technet.microsoft.com/en-us/library/ff758656.aspx, but still no luck. As per the thread, I added the 2 domain accounts to the user policy with appropriate privilege
and then set them as the super user and super reader accounts via powershell, and yes I did prefix those names with "i:0#.w|mydomain\". To be exta sure, I repeated this for all web applications on this server with slightly different powershell steps
depending on wether or not claims was enabled on the web application.
The Claims to Windows Token Service is running.
I saw some mention of ensuring that the secure token service is running with a proper application pool account, but we are not running that service
and I cant imagine what that would have to do with my situation.
I have deleted and readded the web application and repeated these steps to no better effect.
I gave the mydomain\myusername full control for the web application through the user policy, ensured that it was indeed the primary site collection
owner and added it to the default site owners group. None of this helped.
I changed the application pool account to the farm account. No change in behavior.
Rebooted IIS and the machines many times along the way.
Further, when I attempt to sign in as a different user after being denied, I get "an unexpected error has occured message. I found the following
in ULS:
10/30/2012 11:19:03.71 w3wp.exe (0x182C)
0x1210 SharePoint Foundation                 Logging Correlation Data
xmnv     Medium              Name=Request (GET:hzzp://iwatest.mydomain.com:80/_layouts/accessdenied.aspx?loginasanotheruser=true&Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom)
cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
10/30/2012 11:19:03.71 w3wp.exe (0x182C)
0x1210 SharePoint Foundation                 Logging Correlation Data
xmnv     Medium              Site=/    cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
10/30/2012 11:19:03.72 w3wp.exe (0x182C)
0x1210 SharePoint Foundation                 General
         8e2s                Medium              Unknown SPRequest error occurred.
More information: 0x80070005      cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
10/30/2012 11:19:03.72 w3wp.exe (0x182C)
0x1210 SharePoint Foundation                 Runtime
        tkau                Unexpected       System.NullReferenceException: Object reference not set to an instance
of an object.    at Microsoft.SharePoint.ApplicationPages.AccessDeniedPage.LogInAsAnotherUser()     at Microsoft.SharePoint.ApplicationPages.AccessDeniedPage.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)            cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
10/30/2012 11:19:03.74 w3wp.exe (0x182C)
0x1210 SharePoint Foundation                 Monitoring
b4ly                Medium              Leaving Monitored Scope (Request (GET:hzzp://iwatest.mydomain.com:80/_layouts/accessdenied.aspx?loginasanotheruser=true&Source=hzzp%3A%2F%2Fiwatest%2Emydomain%2Ecom)).
Execution Time=22.5439266722447           cc409ec2-4889-42fa-aa7d-9cc4535e4f0e
By the way, this occurs for the farm account also after a successful login and an attempt to sign in as a different user.
Any help would be greatly appreciated

Thanks spadminspadmin:
I have, though I am not sure that what I've added there is correct:
The URL that I am trying to use to access the web application's IIS site is hxxp://iwatest.mydomain.com. I added a binding to the IIS site as follows:
Type    Host name                      port        IP address
http     iwatest.mydomain.com     41171     *
Is that correct?

Newbee - access denied error

I'm following a tutorial and I can't get it to work.
public class SaySomethingImpl extends UnicastRemoteObject implements SaySomething {
     private static final long serialVersionUID = 1L;
     private String name;
     public SaySomethingImpl(String str) throws RemoteException {
          super();
          name = str;
     public String talkToMe() throws RemoteException {
          return "Far and Away!";
      * @param args
     public static void main(String[] args) {
          System.setSecurityManager(new RMISecurityManager());
          try {
               SaySomethingImpl theObj = new SaySomethingImpl("remoteserver");
               Naming.rebind("//home-ilan/remoteserver", theObj);
               System.out.println("SaySomethingServer bound in registry");
          catch(Exception e) {
               System.out.println(e.getMessage());
}I'm running it initially talking to myself over the network. I've shared out the source directory as \\home-ilan\remoteserver. I've given it read/write access.
Then I ran a batch file containing:
F:\eclipse\jre\bin>start rmiregistry
F:\eclipse\jre\bin>java -Djava.rmi.server.codebase=http://home-ilan/remoteserver/ remote.server.SayHelloImpl
Exception in thread "main" java.lang.NoClassDefFoundError: remote/server/SayHelloImpl
Not understanding the meaning of the exception, I decided to run the file under the development environment. It generates an exception at:
Naming.rebind("//home-ilan/remoteserver", theObj);
telling me:
access denied (java.net.SocketPermission home-ilan resolve)
Since this is my first attempt, I don't have any experience to know what could be wrong.
In the long run, I want to have an application on the client end access a database on the server end. I want to server to do the query and return the results to the client. (The tutorial shows an applet, but that I will replace with an application so as to avoid security problems.)
Can anyone tell me what I'm missing?
Thanks,
Ilan

Hi Ilan,
It looks like a combination of problems here.
For a good rmi tutorial, you can consult
http://java.sun.com/docs/books/tutorial/rmi/
It's a bit long, but very useful.
I can also see you use eclipse. Did you try the "ready to use" rmi examples
of the RMI Plugin for Eclipse (http://www.genady.net/rmi/v20/) ?
Your first problem seems to be an incorrectly defined codebase.
It looks like you are trying to use the HTTP protocol to access a windows share.
You should use the file:/ protocol for such shares.
The second problem looks like a security policy problem (ejp - correct me again if I'm wrong...) Since you've installed a security manager you should define a security policy. See the RMI tutorial link (the last step of tutorial) for more info.
Genady

While trying to schedule Update stats db13 : getting access denied

HI Experts
I have scheduled update statistics for all tablespaces in DB13 transaction of ECC system. Once the job completed, ended with below error, saying "Access Denied". But this SAP is on Windows system.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000008, user ID GRCUSER)
Execute logical command BRCONNECT On host GRC10DCSWS
Parameters: -jid STATS20140606020000 -u / -c -f stats -t ALL
BR0801I BRCONNECT 7.20 (29)
BR0252E Function CreateFile() failed for 'E:\oracle\G10\11203\database\spfileG10.ora' at location BrFileStatGet-2
BR0253E errno 5: Access is denied.
BR0273E Determination of file status for E:\oracle\G10\11203\database\spfileG10.ora failed
BR0806I End of BRCONNECT processing: cenzzwvg.log2014-06-06 02.00.16
BR0280I BRCONNECT time stamp: 2014-06-06 02.00.16
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Pl suggest in this regards.
Regards
Vyjayanth M

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Error while trying to backup - Microsoft.SqlServer.SmoExtended, Error 5 (access denied)

Hey guy,
I have a problem with my SQL Express Server.
If I try to backup a database I'm getting the following error:
(Microsoft.SqlServer.SmoExtended)
System.Data.SqlClient.SqlError: Das Sicherungsmedium 'D:\my-database.bak' kann nicht geöffnet werden. Betriebssystemfehler 5(Access denied). (Microsoft.SqlServer.Smo)
I have done this a month ago and it worked.
Can someone help me please?
I am logged in as sa, the OS is Windows Server 2012 Essentials.
Thanks
Regards,
Alex

'D:\my-database.bak' kann nicht geöffnet werden. Betriebssystemfehler 5(Access denied). (Microsoft.SqlServer.Smo)
Hi,
Since error is access denied it means SQL server service account ,the account with which SQL Server service is running, does not have read/write privilege on folder where you are taking backup. It does not matters whether you login with SA.
Now I see you are backing database to root(D:) drive. This should not be practiced its a bad practice and has lots of drawbacks. Instead create a folder BACKUP in D rive and give SQL Server service account read write privileges on that folder and start backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Access denied when adding people to SharePoint group

Hi all,
I've been having problems with my SharePoint 2010 deployment that wasn't deployed by me. Sound familiar? Anyways, here is my problem: I try to add people to a SharePoint group and I'm getting:
Access Denied.
You do not have permission to perform this action or access this resource.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 930333d7-64dc-4135-8f51-686303a9847c
Date and Time: 7/29/2014 2:21:11 PM
I've been having problems with pulling AD members in one of my site collections for awhile now. Been troubleshooting with what information I can find online. One step I took was to blank out the LDAP search string for each site collection so that it's not
limited to certain OUs.
Also I am getting security log entries that my farm account is trying to authenticate as a privileged [administrative permissioned] account for an employee that is no longer with us. Coincidentally enough he's the one that deployed this SharePoint solution
originally.
I need help in tracking down why I cannot add users to groups in this one site collection; but my root site collection I can add people no problem.
Environment:
Server1: SQL 2008 R2 on Windows Server 2008 R2
Server2: SharePoint 2010 with Enterprise CALs on Server 2008 R2
Current event viewer entries of note:
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load the assembly ';Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'. Make sure that it is compiled before accessing the page.
Object Cache: The super user account utilized by the cache is not configured. This can increase the number of cache misses, which causes the page requests to consume unneccesary system resources.
To configure the account use the following command 'stsadm -o setproperty -propertyname portalsuperuseraccount -propertyvalue account -url webappurl'. The account should be any account that has Full Control access to the SharePoint databases but is not an application pool account.
Additional Data:
Current default super user account: SHAREPOINT\system
A logon was attempted using explicit credentials.
Subject:
Security ID: domain\farm_account
Account Name: farm_account
Account Domain: domain
Logon ID: 0x79c13
Logon GUID: {e25efc28-8db1-ea76-9a8e-6d0143a681d9}
Account Whose Credentials Were Used:
Account Name: former_admin_employee
Account Domain: domain
Logon GUID: {00000000-0000-0000-0000-000000000000}
Target Server:
Target Server Name: domain_controller.domain.net
Additional Information: domain_controller.domain.net
Process Information:
Process ID: 0x13b0
Process Name: C:\Windows\System32\inetsrv\w3wp.exe
Network Information:
Network Address: -
Port: -
This event is generated when a process attempts to log on an account by explicitly specifying that account’s credentials. This most commonly occurs in batch-type configurations such as scheduled tasks, or when using the RUNAS command.

Hello,
> he's the one that deployed this SharePoint solution originally.
Are you trying to add user by custom solution? If so then it seems your code is using the impersonate method to run code with admin privileged (i.e. RunWithElevatedPrivileges or User token).
If this is the case then you have to first add new account as site collection in site then change that web application pool identity on IIS. Go to IIS-->select your web app pool-->then go to properties and verify which account is been used
there. If it is old then replace with your account.
Let us know your result
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Database Access Denied

Similar Messages

Maybe you are looking for