Datafile issues in manual standby database
Hi all,
oracle - 10gR2
OS - RHEL 2.6
We have primary and standby database setup using manual methods('rsync') to send archive logs from primary to standby database and they are applied there. Today I have created a new datafile in primary and seen that the same is not replicated in standby( i was not aware of the functionality of this kind of setup) later I have seen that "standby_file_management parameter is set to MANUAL".
I have seen the following message in standby alert log(not disabled the archive log application script in satndby),
"Media Recovery Log /u01/app/oracle/oradata/bmprod/archivelog/1_1761_703415336.arc
File #6 added to control file as 'UNNAMED00006' because
the parameter STANDBY_FILE_MANAGEMENT is set to MANUAL
The file should be manually created to continue.
Some recovered datafiles maybe left media fuzzy
Media recovery may continue but open resetlogs may fail"
Later I have copied the required file from primary to standby database(now I have disabled the archive log application script in standby), and renamed the datafile 'UNNAMED00006' to 'desired one' and restarted the archive log application script. I have seen the following messages,
"ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01194: file 6 needs more recovery to be consistent
ORA-01110: data file 6: '/u02/app/oracle/oradata/bmprod/BMTEST.dbf'"
Now I am unable to figure out what I should do to come out of this situation. Atleast tell me this condition is not worse than I thought(I think that the standby database should be recreated).
Any help is appreciated.......
regards
Edited by: techfeud on Jan 18, 2010 11:26 PM
Hi,
when you set the standby_file_management parameter as mannual then , if you create any datafile or adding it to the tablespace then you should mannaully run the command on the standby side , if its auto then auto matically it will create the file over in the respective locationa and with the name what you have used to create the datafile on the primary side,
as the parameter value is mannual ypu need to create the datafile over the standby side and then performt the recovery,
Farhan.
Similar Messages
-
How to shift Manual Standby Database to Primary Database
Hi all,
My Database edition is Oracle 10G standard Edition and runing 24X7 and configure Manual Stand by Database. if I were changing some iniliazation parameter and datafiles.
What can I do ?
i) How to swift the Manual Stand by Database to Primary Database.
ii) What is the procedure by step by step information need.
Regards.....If you're using a Manual Standby Database I assume you are using a pfile to apply the archived logs transported from the primary database created while creating the Manual Standard. at that time you should have kept the spfile in place too.
If you have done this, then you can simply open an SQL*Plus session connect as sysdba and issue a simple STARTUP command.
This will use the SPFILE by default and your database will be opened normally.
But if you don't have an SPFILE you can always create one, just specify the necessary control files (not the standby control file) in your pfile, remove unwanted parameters and create the spfile, and use the same step as above and issue a STARTUP.
But once you open your standby database normally you will not be able to switch back to standby mode, you have to recreate it again from a cold backup and create a new standby control file.
Regards,
Tony -
Oracle manually standby database with standard edition
Hi, I want to have a plan for disaster. I'm triying with two virtual machines with oracle database 10g on suse linux. I follow these URLs
http://www.dbasupport.com/oracle/ora10g/manual_standby.shtml
http://oramdq.blogspot.com/2009/05/como-configurar-un-sistema-de-alta.html
and it look that work all right.
I know that with manually standby database we applied archived logs, and so, we don't propagate any physical changes to secondary database (standby), for example, if I create a new tablespace, or adding a new datafile to an existing tablespace, it don't work in the secondary database.
Anyone does know how is the better way to apply the physical changes??
Anyone have any scripts to do that?
Thanks in advance.HI,
Add the STANDBY_FILE_MANAGEMENT = AUTO to the primary parameter file, it will solve it.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams209.htm]
Reagds,
Vijayaraghavan K
Edited by: Vijayaraghavan Krishnan on Feb 24, 2010 7:19 PM -
Manual Standby Database not in sync with missing archivelogs
Hello,
OS: Solaris
DB: Oracle 11.2.0.1 EE
Not Using ASM or RAC
I have a Production database that is in archivelog mode and a Standby DR server.
Both servers (Prod, Standby) have exact same structure and db name/version.
We manually scp archive logs and recover them to a manual standby database via SQL Scripts "cron". (I.E. set autorecovery on; recover standby database;)
We recently got out of sync with our log files and have not been applying them to the standby. As part of Prod Maintenance, these log files were deleted and are not available anymore.
I've tried several ways to "rebuild" our standby database. I have tried to Shutdown prod, backup all the db files and scp them to standby, re-create standby controlfile and startup mount and recover standby.
Every time I try to apply a new archive log via recover standby, these are the errors:
ORA-00279: change 211077622 generated at 1/27/2012 12:18:42 needed for thread 1
ORA-00289: suggestion : /oradump/arch/PROD/PROD_arch_1_69486_736618850.arc
ORA-00280: change 211077622 for thread 1 is in sequence #69486
ORA-00308: cannot open archived log '/oradump/arch/PROD/PROD_arch_1_69486_736618850.arc'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-10879: error signaled in parallel recovery slave
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/oradevices/PROD/oraPRODsystem1.dbf'
When I check v$log_history, the new logs have not been applied.
I've also tried the "Restore from incremental backup via SCN" method with same results.
Is there a way to re-create the standby clean and ensure that the log chain that is currently broken gets fixed or reset?
I would eventually like to get DataGuard in here, but that's not the case at the moment.
Thanks for your suggestions.
-Davif you are using the cold backup to create the standby database, Check that have you followed the following steps or not.
1. remove
all the datafiles and controlfiles from the standby database.
2. Create a new standby controlfile of the production for standby using the following cmd
'alter database create standby controlfile as 'Location';'
3. move the new controlfile to standby database server location as specified in initialization parameter file.
4. Restore all the datafiles to its appropriate loaction which was taken through cold backup.
5. startup nomount
6. alter database mount standby database;
7. recover standby database.
scp the archive log sequence that is asked by the database, from production.
You can try this steps. -
Switchover of a manual standby database (no data guard)
Hi all,
I have a standby database .
I am using Oracle Standard Edition 10.2.0.4 / 10.2.0.5 so I have build a manual standby .
I am able to do a failover in the case something goes wrong; I was thinking if it is possible to do a manual switchover . and failback.
Do you thick that mounting the primary database and applying ALL archivelogs and online redolog to the standby database is enough ?
Do you think this is a supported operation?
How can I check the current scn of a mounted database? (v$database.current_scn shows 0 until the database is opened )
thnk you for every answer
Andreahelter_skelter wrote:
hi,
You can see current_scn of standby database in v$database.current_scn. It is null only on primary database if it's in mount state.that's the problem: I am unable to mount both database and to check they have the same current_scn
not all changes are written to ARL so you can't recover standby database to exact the same SCN as primaryI thinks this is because the last changes are only recorder in online redolog, so I was thinking that a possible way to simulate a clean switchover could be as follow:
1 - shutdown immediate the primary database on server prod1
2 - shutdown abort the (manual) standby database on server dr2
3 - copy archivelog, controlfiles, tempfiles, onlinelogs from primary to the standby database
3 - copy controlfiles from standby database to primary database
4 - open the database on server dr2. It should open "read write" cleanly (mount + recover from archivelog + recover from onlinelog + open noresetlogs )
5 - mount the database on server prod1. It should mount as a physical standby database.
What do you think about it?
thanks,
andrea -
Hi,
I have ORACLE 10.2.0.3.0 64 bit SE1 running on a RHEL4 server. I have a backup server on which I need to create a manual standby database for a (poor man's) high availability environment. We have explored RAC, Dataguard etc and given them up for cost considerations. We understand the potential of up to 15 minutes data loss. I know the general steps necessary to set up the manual standby server. For example, I know I need a cold (or hot) backup of the primary to reset my standby database. Then I need to create the standby control file. I need to write deamon processes to ship the archive logs to the standby server and apply those logs to the database. I am new to ORACLE and would appreciate some specific advice.
(1) Should I use DBCA to create the database on the standby server first? My impression is that using DBCA will set up the enterprise manager, isqlplus and the relevevant entries in oratab etc on the standby server. If I simply install ORACLE 10g on the standby and copy the backup files from the primary server, I will not have access to the database tools that come with ORACLE 10g.
(2) Can someone please share the scripts you may have written? or point me to some skeleton scripts?
(3) What are the failure points for manual standby databases? What do I need to pro-actively monitor? For example, if the logs are not being applied properly to the standby database for a prolonged period, I would like to know about it.
(4) What are the procedures for recovering from a failed master database?
(5) Where can I learn more about the subject? I will need specific commands to setup the standby. Are these procedures documented somewhere?
Thanks!
- RajeshTry this one Manual Standby Database under Oracle Standard Edition
Or search the subject on google, many results.
No, you will not create "standby" using DBCA, you need to use primary's backup to restore on standby server and constantly recover. -
Manual Standby Database from EE to SE1
Can I do a Manual Standby Database from Oracle Enterprise edition (EE) to Oracle Standard Edition One (SE1)?
Hi,
You can created a manual standby for EE, But you need to purchase a seperate licence for standby database also.
See oracle licencing manul in oracle documentation.
Thanks and Regards,
Satish.G.S -
Issue on physical standby database
Hi
I've a problem on standby database.
I recently added a datafile on primary database, then I scp'ed the data file to physical standby database.On physical standby database I tried performing recovery.
I get following message in my alert log
WARNING! Recovering data file 88 from a fuzzy file. If not the current file
it might be an online backup taken without entering the begin backup command.
ORA-279 signalled during: ALTER DATABASE RECOVER standby database ...
how can I fix this now.
We keep physical standby database 2 day behind, and apply logs manually.
Physical standby database is maintained manually.
Could someone help me in getting out of this problem.
Oracle 9.2.0.7
solarisVersus keeping it in manual mode, you can specify a time "delay" for the application of the logs:
From http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/log_apply.htm#i1022811
6.2.2 Specifying a Time Delay for the Application of Archived Redo Log Files
In some cases, you may want to create a time lag between the time when redo data is received from the primary site and when it is applied to the standby database. You can specify a time interval (in minutes) to protect against the application of corrupted or erroneous data to the standby database. When you set a DELAY interval, it does not delay the transport of the redo data to the standby database. Instead, the time lag you specify begins when the redo data is completely archived at the standby destination.
Note:
If you define a delay for a destination that has real-time apply enabled, the delay is ignored.
Specifying a Time Delay
You can set a time delay on primary and standby databases using the DELAY=minutes attribute of the LOG_ARCHIVE_DEST_n initialization parameter to delay applying archived redo log files to the standby database. By default, there is no time delay. If you specify the DELAY attribute without specifying a value, then the default delay interval is 30 minutes.
Canceling a Time Delay
You can cancel a specified delay interval as follows:
For physical standby databases, use the NODELAY keyword of the RECOVER MANAGED STANDBY DATABASE clause:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE NODELAY;
For logical standby databases, specify the following SQL statement:
SQL> ALTER DATABASE START LOGICAL STANDBY APPLY NODELAY;
These commands result in log apply services immediately beginning to apply archived redo log files to the standby database, before the time interval expires. Also, see:
Section 12.8, "Using a Physical Standby Database with a Time Lag"
Oracle Database SQL Reference for the DELAY attribute of the ALTER DATABASE RECOVER MANAGED STANDBY DATABASE statement -
Manual Standby Database (10.2.0.2.0) on Windows 2003 R2
Hi,
We are setting up a standby database on a remote site for a simple oracle DB. As we already have a standby/master for another Oracle DB (from SAP) we want to stay as close as possible as what already exist.
For the SAP Oracle standby, we are copying manualy all archive to the stand by and apply them with brarchive. All is working fine.
For the new standby, we can not use brarchive as there is no SAP install on the standby but we stay with the "manual" copy of the archive from the master to the standby (using robocpy). It means all archive are on the standby (K:\oracle\oradata\archive).
The creation of the standby DB seems to be OK as i can open it, but i can't manage to apply de redo logs.
I'm quite new to oracle, so it's maybe a very basic issue, but i've already spent 3 days on it...
To start the DB, we lauch a bat script :
sqlplus /nolog @c:\backup\standby.sql
pause
the standby.sql:
connect /@TECDB01 as sysdba
startup nomount;
alter database mount standby database;
exit;
Then i connect to sqlplus and enter:
alter database recover managed standby database;
In another sqlplus session :
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
wich give me :
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
MR(fg) WAIT_FOR_GAP 1 45400 0 0
RFS IDLE 0 0 0 0
The sequence 45400 seems to be ok regarding the time of the backup restored on the standby.
The archive is well on the server, but it won't apply it.
The Alert_TECDB01.log :
Fri Oct 29 11:03:43 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =121
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 999
sga_target = 7214202880
control_files = I:\ORACLE\ORADATA\CNTRL\STANDBY.CTL, J:\ORACLE\ORADATA\CNTRL\STANDBY.CTL, K:\ORACLE\ORADATA\CNTRL\STANDBY.CTL
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=K:\oracle\oradata\archive
log_archive_dest_2 = SERVICE=TECDB01
log_archive_dest_state_1 = enable
log_archive_dest_state_2 = enable
standby_archive_dest = K:\oracle\oradata\archive
archive_lag_target = 1800
db_file_multiblock_read_count= 16
undo_management = AUTO
undo_tablespace = RBS
undo_retention = 10800
recyclebin = OFF
remote_login_passwordfile= EXCLUSIVE
db_domain = WORLD
dispatchers = (ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.92))(DISPATCHERS=4)(CONNECTIONS=1000)
shared_servers = 100
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=xxx.xxx.xxx.92)(PORT=1521))
session_cached_cursors = 300
utl_file_dir = \\srvuniway.vrithoff.srwt.tec-wl.be\hotspots
job_queue_processes = 10
audit_file_dest = I:\ORACLE\ADMIN\TECDB01\ADUMP
background_dump_dest = I:\ORACLE\ADMIN\TECDB01\BDUMP
user_dump_dest = I:\ORACLE\ADMIN\TECDB01\UDUMP
core_dump_dest = I:\ORACLE\ADMIN\TECDB01\CDUMP
db_name = TECDB01
open_cursors = 3000
pga_aggregate_target = 1086324736
PMON started with pid=2, OS id=4012
PSP0 started with pid=3, OS id=3856
MMAN started with pid=4, OS id=3580
DBW0 started with pid=5, OS id=1084
LGWR started with pid=6, OS id=576
CKPT started with pid=7, OS id=3516
SMON started with pid=8, OS id=508
RECO started with pid=9, OS id=3068
CJQ0 started with pid=10, OS id=2448
MMON started with pid=11, OS id=2840
MMNL started with pid=12, OS id=3024
Fri Oct 29 11:03:44 2010
starting up 4 dispatcher(s) for network address '(ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.92))'...
starting up 100 shared server(s) ...
Fri Oct 29 11:03:45 2010
alter database mount standby database
Fri Oct 29 11:03:51 2010
Setting recovery target incarnation to 2
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=118, OS id=3584
Fri Oct 29 11:03:51 2010
ARC0: Archival started
ARC1 started with pid=119, OS id=3688
Fri Oct 29 11:03:51 2010
ARC1: Archival started
ARCH: STARTING ARCH PROCESSES COMPLETE
Fri Oct 29 11:03:51 2010
ARC0: Becoming the 'no FAL' ARCH
Fri Oct 29 11:03:51 2010
Successful mount of redo thread 1, with mount id 3987142355
Fri Oct 29 11:03:51 2010
ARC0: Becoming the 'no SRL' ARCH
Fri Oct 29 11:03:51 2010
ARC1: Becoming the heartbeat ARCH
Fri Oct 29 11:03:51 2010
Physical Standby Database mounted.
Completed: alter database mount standby database
Fri Oct 29 11:04:06 2010
alter database recover managed standby database
Fri Oct 29 11:04:06 2010
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 7 processes
Media Recovery Waiting for thread 1 sequence 45400
Fetching gap sequence in thread 1, gap sequence 45400-45499
+FAL[client]: Error fetching gap sequence, no FAL server specified+
Fri Oct 29 11:04:37 2010
+FAL[client]: Failed to request gap sequence+
GAP - thread 1 sequence 45400-45499
DBID 3776455083 branch 670241032
+FAL[client]: All defined FAL servers have been attempted.+
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization
parameter is defined to a value that is sufficiently large
enough to maintain adequate log switch information to resolve
archivelog gaps.
Fri Oct 29 11:04:51 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 3452
RFS[1]: Identified database type as 'physical standby'
Fri Oct 29 11:04:51 2010
RFS LogMiner: Client disabled from further notification
The tecdb01_arc1_3688.trc :
Dump file i:\oracle\admin\tecdb01\bdump\tecdb01_arc1_3688.trc
Fri Oct 29 11:03:51 2010
ORACLE V10.2.0.2.0 - 64bit Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Windows NT Version V5.2 Service Pack 2
CPU : 8 - type 8664, 2 Physical Cores
Process Affinity : 0x0000000000000000
Memory (Avail/Total): Ph:7467M/9215M, PhPgF:2454M/10796M+
Instance name: tecdb01
Redo thread mounted by this instance: 1
Oracle process number: 119
Windows thread id: 3688, image: ORACLE.EXE (ARC1)
*** SERVICE NAME:() 2010-10-29 11:03:51.177
*** SESSION ID:(1088.1) 2010-10-29 11:03:51.177
kcrrwkx: nothing to do (start)
*** 2010-10-29 11:04:51.129
Redo shipping client performing standby login
*** 2010-10-29 11:04:51.176 64529 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
kcrrwkx: nothing to do (end)
*** 2010-10-29 11:05:51.285
kcrrwkx: nothing to do (end)
*** 2010-10-29 11:06:51.300
kcrrwkx: nothing to do (end)
The initTECDB01.ora :
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
archive_lag_target=1800
log_archive_dest_1='LOCATION=K:\oracle\oradata\archive'
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=3000
session_cached_cursors=300
# Database Identification
db_domain=WORLD
db_name=TECDB01
# Diagnostics and Statistics
background_dump_dest=I:\oracle\admin\TECDB01\bdump
core_dump_dest=I:\oracle\admin\TECDB01\cdump
user_dump_dest=I:\oracle\admin\TECDB01\udump
# File Configuration
control_files=("I:\oracle\oradata\cntrl\standby.ctl", "J:\oracle\oradata\cntrl\standby.ctl", "K:\oracle\oradata\cntrl\standby.ctl")
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.2.0.2.0
recyclebin=OFF
# Processes and Sessions
processes=999
# SGA Memory
sga_target=6880M
# Pools
#java_pool_size=150M
# Security and Auditing
audit_file_dest=I:\oracle\admin\TECDB01\adump
remote_login_passwordfile=EXCLUSIVE
# Shared Server
shared_servers=100
dispatchers="(ADDRESS=(PROTOCOL=tcp)(HOST=xxx.xxx.xxx.92))(DISPATCHERS=4)(CONNECTIONS=1000)"
#dispatchers="(PROTOCOL=TCP) (SERVICE=TECDB01XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=1036M
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_retention=10800
undo_tablespace=RBS
local_listener="(ADDRESS=(PROTOCOL=TCP)(HOST=xxx.xxx.xxx.92)(PORT=1521))"
# NIDA - 28.10.2010 - redo apply
log_archive_dest_state_1=enable
log_archive_dest_2 = 'SERVICE=TECDB01'
log_archive_dest_state_2=enable
#standby_file_management=auto
standby_archive_dest=K:\oracle\oradata\archive
And the TNSNAMES.ora :
# tnsnames.ora Network Configuration File: C:\oracle\102\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
#this is the standby
TECDB01.VRITHOFF.SRWT.TEC-WL.BE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.92)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = TECDB01)
# This file is written by Oracle Services For MSCS
# on Sat Nov 08 10:44:27 2008
#this is the master
PRIMARY.VRITHOFF.SRWT.TEC-WL.BE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.246)(PORT = 1521))
(CONNECT_DATA =
(SID = TECDB01)
EXTPROC_CONNECTION_DATA.VRITHOFF.SRWT.TEC-WL.BE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = TECDB01))
(CONNECT_DATA =
(SERVICE_NAME = TECDB01)
Hope you have all information to bring me in the right way.
Regards,
NicolasHi,
The recover automatic is working fine, but I still have problems with the recover managed
Here is the Alert log :(the 46626 was there at 11:30)
Mon Nov 15 11:31:13 2010
alter database recover managed standby database using current logfile
Managed Standby Recovery starting Real Time Apply
parallel recovery started with 7 processes
Media Recovery Waiting for thread 1 sequence 46626
Mon Nov 15 16:36:01 2010
alter database recover managed standby database cancel
Mon Nov 15 16:36:05 2010
Managed Standby Recovery not using Real Time Apply
Recovery interrupted!
Mon Nov 15 16:36:06 2010
Media Recovery user canceled with status 16037
ORA-16043 signalled during: alter database recover managed standby database using current logfile...
Mon Nov 15 16:36:07 2010
Completed: alter database recover managed standby database cancel
Mon Nov 15 16:36:37 2010
ALTER DATABASE RECOVER automatic standby database until time'2010-11-15:15:50:00'
Mon Nov 15 16:36:37 2010
Media Recovery Start
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 7 processes
Mon Nov 15 16:36:39 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46626_0670241032.001
Mon Nov 15 16:36:45 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46627_0670241032.001
Mon Nov 15 16:37:11 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46628_0670241032.001
Mon Nov 15 16:37:30 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46629_0670241032.001
Mon Nov 15 16:37:48 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46630_0670241032.001
Mon Nov 15 16:37:59 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46631_0670241032.001
Mon Nov 15 16:38:15 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46632_0670241032.001
Mon Nov 15 16:38:28 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46633_0670241032.001
Mon Nov 15 16:38:47 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46634_0670241032.001
Mon Nov 15 16:39:34 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46635_0670241032.001
Mon Nov 15 16:40:43 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46636_0670241032.001
Mon Nov 15 16:42:03 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46637_0670241032.001
Mon Nov 15 16:43:18 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46638_0670241032.001
Mon Nov 15 16:44:38 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46639_0670241032.001
Mon Nov 15 16:45:45 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46640_0670241032.001
Mon Nov 15 16:46:37 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46641_0670241032.001
Mon Nov 15 16:47:48 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46642_0670241032.001
Mon Nov 15 16:49:07 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46643_0670241032.001
Mon Nov 15 16:50:04 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46644_0670241032.001
Mon Nov 15 16:51:13 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46645_0670241032.001
Mon Nov 15 16:52:16 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46646_0670241032.001
Mon Nov 15 16:53:07 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46647_0670241032.001
Mon Nov 15 16:54:28 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46648_0670241032.001
Mon Nov 15 16:55:47 2010
Media Recovery Log K:\ORACLE\ORADATA\ARCHIVE\ARC46649_0670241032.001
Mon Nov 15 16:56:35 2010
Incomplete Recovery applied until change 4037420604
Completed: ALTER DATABASE RECOVER automatic standby database until time'2010-11-15:15:50:00'
I don't catch why the system wait for a sequence that is available...
Regards,
Nico -
Issue in configuring Standby Database from Active database in 11g by RMAN
POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PMHello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg -
Issue in creating Standby database
hi ALL
I am trying to create a standby database on a different server.
I am creating through RMAN with duplicate database command.
I am stuck with the issue where after backup it is not able to startup auxiliary database with error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/07/2010 13:00:57
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-01261: Parameter db_recovery_file_dest destinati
on string cannot be translated
ORA-01263: Name given for file destination directory is invalid
OSD-04018: Unable to access the specified directory or device.
O/S-Error: (OS 3) The system cannot find the path specified.
RMAN> **end-of-file**
My db_recovery_file_dest is different from the default location on primary.
I have created the db_recovery_dest in standby and set the parameter in rman script as well . But it is not working
Please help
thanks in advancejatinmahajan wrote:
hi ALL
I am trying to create a standby database on a different server.
I am creating through RMAN with duplicate database command.
I am stuck with the issue where after backup it is not able to startup auxiliary database with error
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 06/07/2010 13:00:57
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-01261: Parameter db_recovery_file_dest destinati
on string cannot be translated
ORA-01263: Name given for file destination directory is invalid
OSD-04018: Unable to access the specified directory or device.
O/S-Error: (OS 3) The system cannot find the path specified.
Hi, the value of db_recovery_file_dest parameter is invalid,set this properly value(path) for this parameter and try again. -
Issue with physical standby database not in sync with primary
Hi,
I created an physical standby database couple of Hours back . I am trying to keep the standby database in Managed recovery mode to make the standby in sync with primary but it is throwing the below erros. Please share your suggestion ...
SQL> select thread#,max(sequence#) from v$log_history group by thread#;
THREAD# MAX(SEQUENCE#)
1 7
PROCESS STATUS THREAD# SEQUENCE#
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
RFS OPENING 1 12
ALERT LOG :
Tue Mar 20 07:31:32 2012
alter database recover managed standby database disconnect from session
Tue Mar 20 07:31:32 2012
Attempt to start background Managed Standby Recovery process (PRIMARY)
MRP0 started with pid=18, OS id=16370
Tue Mar 20 07:31:32 2012
MRP0: Background Managed Standby Recovery process started (PRIMARY)
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 8 processes
Media Recovery Log /oracle/STDBY/arch/1_3_777567883.dbf
Tue Mar 20 07:31:39 2012
Completed: alter database recover managed standby database disconnect from session
Tue Mar 20 07:31:54 2012
Incomplete recovery applied all redo ever generated.
Recovery completed through change 9677325080303
Tue Mar 20 07:31:54 2012
MRP0: Media Recovery Complete (PRIMARY)
Tue Mar 20 07:31:55 2012
MRP0: Background Media Recovery process shutdown (PRIMARY)
Thanks,
RakeshHI CKPT,
Thanks for the reply. All the Archives from primary are transferred to the standby by RFS. Also i tried to register the log files manually even but it says already registered. They are no errors in the primary instance alert log file. Please find the log
SEVERITY ERROR_CODE MESSAGE TO_CHAR(TIMESTAMP,'D
Informational 0 ARC0: Archival started 20-MAR-2012 06:51:36
Informational 0 ARC1: Archival started 20-MAR-2012 06:51:36
Informational 0 ARC0: Becoming the 'no FAL' ARCH 20-MAR-2012 06:51:36
Informational 0 ARC0: Becoming the 'no SRL' ARCH 20-MAR-2012 06:51:36
Informational 0 ARC1: Becoming the heartbeat ARCH 20-MAR-2012 06:51:36
Informational 0 Redo Shipping Client Connected as PUBLIC 20-MAR-2012 06:52:07
Informational 0 -- Connected User is Valid 20-MAR-2012 06:52:07
Informational 0 RFS[1]: Assigned to RFS process 15934 20-MAR-2012 06:52:07
Informational 0 RFS[1]: Identified database type as 'physical standby' 20-MAR-2012 06:52:07
Warning 0 RFS[1]: No standby redo logfiles created 20-MAR-2012 06:52:07
Control 0 Attempt to start background Managed Standby Recovery process 20-MAR-2012 06:52:42
Control 0 MRP0: Background Managed Standby Recovery process started 20-MAR-2012 06:52:42
Informational 0 Managed Standby Recovery not using Real Time Apply 20-MAR-2012 06:52:47
Informational 0 Media Recovery Log /oracle/STDBY/arch/1_3_777567883.d 20-MAR-2012 06:52:49
bf
Control 0 MRP0: Media Recovery Complete 20-MAR-2012 06:53:04
Control 0 MRP0: Background Media Recovery process shutdown 20-MAR-2012 06:53:06
Informational 0 Managed Standby Recovery not using Real Time Apply 20-MAR-2012 06:53:24
Control 0 Media Recovery Complete 20-MAR-2012 06:53:43
Control 0 Attempt to start background Managed Standby Recovery process 20-MAR-2012 06:54:55
Control 0 MRP0: Background Managed Standby Recovery process started 20-MAR-2012 06:54:55
Informational 0 Managed Standby Recovery not using Real Time Apply 20-MAR-2012 06:55:00
Informational 0 Media Recovery Log /oracle/STDBY/arch/1_3_777567883.d 20-MAR-2012 06:55:01
bf
Control 0 MRP0: Media Recovery Complete 20-MAR-2012 06:55:17
Control 0 MRP0: Background Media Recovery process shutdown 20-MAR-2012 06:55:18
Informational 0 Redo Shipping Client Connected as PUBLIC 20-MAR-2012 07:31:03
Informational 0 -- Connected User is Valid 20-MAR-2012 07:31:03
Informational 0 RFS[2]: Assigned to RFS process 16366 20-MAR-2012 07:31:03
Informational 0 RFS[2]: Identified database type as 'physical standby' 20-MAR-2012 07:31:03
Warning 0 RFS[2]: No standby redo logfiles created 20-MAR-2012 07:31:04
Warning 0 RFS[2]: No standby redo logfiles created 20-MAR-2012 07:31:06
Control 0 Attempt to start background Managed Standby Recovery process 20-MAR-2012 07:31:32
Control 0 MRP0: Background Managed Standby Recovery process started 20-MAR-2012 07:31:32
Informational 0 Managed Standby Recovery not using Real Time Apply 20-MAR-2012 07:31:37
Informational 0 Media Recovery Log /oracle/STDBY/arch/1_3_777567883.d 20-MAR-2012 07:31:38
bf
Control 0 MRP0: Media Recovery Complete 20-MAR-2012 07:31:54
Control 0 MRP0: Background Media Recovery process shutdown 20-MAR-2012 07:31:55
36 rows selected.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/STDBY/arch/
Oldest online log sequence 13
Next log sequence to archive 0
Current log sequence 14
SQL> ho ls -ltra /oracle/STDBY/arch/
total 3754456
drwxr-xr-x 4 oracle dba 4096 Feb 13 17:38 ..
-rw-r----- 1 oracle dba 908516864 Mar 20 06:37 1_8_777567883.dbf
-rw-r----- 1 oracle dba 770419200 Mar 20 06:40 1_3_777567883.dbf
-rw-r----- 1 oracle dba 757698048 Mar 20 06:41 1_4_777567883.dbf
-rw-r----- 1 oracle dba 5171712 Mar 20 06:41 1_5_777567883.dbf
-rw-r----- 1 oracle dba 1060801024 Mar 20 06:43 1_6_777567883.dbf
-rw-r----- 1 oracle dba 323025920 Mar 20 06:43 1_7_777567883.dbf
-rw-r----- 1 oracle dba 1558016 Mar 20 06:43 1_9_777567883.dbf
-rw-r----- 1 oracle dba 4608 Mar 20 06:43 1_10_777567883.dbf
-rw-r----- 1 oracle dba 1579008 Mar 20 06:52 1_11_777567883.dbf
-rw-r----- 1 oracle dba 11876864 Mar 20 07:31 1_12_777567883.dbf
-rw-r----- 1 oracle dba 2560 Mar 20 07:31 1_13_777567883.dbf
drwxr-xr-x 2 oracle dba 36864 Mar 20 07:31 .
SQL> -
Hi Friends,
I am getting the following exception in logical standby database at the time of Sql Apply.
After run the command alter database start logical standby apply sql apply services start but after few second automatically stop and getting following exception.
alter database start logical standby apply
Tue May 17 06:42:00 2011
No optional part
Attempt to start background Logical Standby process
LOGSTDBY Parameter: MAX_SERVERS = 20
LOGSTDBY Parameter: MAX_SGA = 100
LOGSTDBY Parameter: APPLY_SERVERS = 10
LSP0 started with pid=30, OS id=4988
Tue May 17 06:42:00 2011
Completed: alter database start logical standby apply
Tue May 17 06:42:00 2011
LOGSTDBY status: ORA-16111: log mining and apply setting up
Tue May 17 06:42:00 2011
LOGMINER: Parameters summary for session# = 1
LOGMINER: Number of processes = 4, Transaction Chunk Size = 201
LOGMINER: Memory Size = 100M, Checkpoint interval = 500M
Tue May 17 06:42:00 2011
LOGMINER: krvxpsr summary for session# = 1
LOGMINER: StartScn: 0 (0x0000.00000000)
LOGMINER: EndScn: 0 (0x0000.00000000)
LOGMINER: HighConsumedScn: 2660033 (0x0000.002896c1)
LOGMINER: session_flag 0x1
LOGMINER: session# = 1, preparer process P002 started with pid=35 OS id=4244
LOGSTDBY Apply process P014 started with pid=47 OS id=5456
LOGSTDBY Apply process P010 started with pid=43 OS id=6484
LOGMINER: session# = 1, reader process P000 started with pid=33 OS id=4732
Tue May 17 06:42:01 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1417, X:\TANVI\ARCHIVE2\ARC01417_0748170313.001
Tue May 17 06:42:01 2011
LOGMINER: Turning ON Log Auto Delete
Tue May 17 06:42:01 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01417_0748170313.001
Tue May 17 06:42:01 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1418, X:\TANVI\ARCHIVE2\ARC01418_0748170313.001
LOGSTDBY Apply process P008 started with pid=41 OS id=4740
LOGSTDBY Apply process P013 started with pid=46 OS id=7864
LOGSTDBY Apply process P006 started with pid=39 OS id=5500
LOGMINER: session# = 1, builder process P001 started with pid=34 OS id=4796
Tue May 17 06:42:02 2011
LOGMINER: skipped redo. Thread 1, RBA 0x00058a.00000950.0010, nCV 6
LOGMINER: op 4.1 (Control File)
Tue May 17 06:42:02 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01418_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1419, X:\TANVI\ARCHIVE2\ARC01419_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01419_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1420, X:\TANVI\ARCHIVE2\ARC01420_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01420_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1421, X:\TANVI\ARCHIVE2\ARC01421_0748170313.001
LOGSTDBY Analyzer process P004 started with pid=37 OS id=5096
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01421_0748170313.001
LOGSTDBY Apply process P007 started with pid=40 OS id=2760
Tue May 17 06:42:03 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
LOGSTDBY Apply process P012 started with pid=45 OS id=7152
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1422, X:\TANVI\ARCHIVE2\ARC01422_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01422_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1423, X:\TANVI\ARCHIVE2\ARC01423_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01423_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1424, X:\TANVI\ARCHIVE2\ARC01424_0748170313.001
LOGMINER: session# = 1, preparer process P003 started with pid=36 OS id=5468
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01424_0748170313.001
Tue May 17 06:42:04 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1425, X:\TANVI\ARCHIVE2\ARC01425_0748170313.001
LOGSTDBY Apply process P011 started with pid=44 OS id=6816
LOGSTDBY Apply process P005 started with pid=38 OS id=5792
LOGSTDBY Apply process P009 started with pid=42 OS id=752
Tue May 17 06:42:05 2011
krvxerpt: Errors detected in process 34, role builder.
Tue May 17 06:42:05 2011
krvxmrs: Leaving by exception: 600
Tue May 17 06:42:05 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
LOGSTDBY status: ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
Tue May 17 06:42:06 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_lsp0_4988.trc:
ORA-12801: error signaled in parallel query server P001
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
Tue May 17 06:42:06 2011
LogMiner process death detected
Tue May 17 06:42:06 2011
logminer process death detected, exiting logical standby
LOGSTDBY Analyzer process P004 pid=37 OS id=5096 stopped
LOGSTDBY Apply process P010 pid=43 OS id=6484 stopped
LOGSTDBY Apply process P008 pid=41 OS id=4740 stopped
LOGSTDBY Apply process P012 pid=45 OS id=7152 stopped
LOGSTDBY Apply process P014 pid=47 OS id=5456 stopped
LOGSTDBY Apply process P005 pid=38 OS id=5792 stopped
LOGSTDBY Apply process P006 pid=39 OS id=5500 stopped
LOGSTDBY Apply process P007 pid=40 OS id=2760 stopped
LOGSTDBY Apply process P011 pid=44 OS id=6816 stopped
Tue May 17 06:42:10 2011Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []submit an SR to ORACLE SUPPORT.
refer these too
*ORA-600/ORA-7445 Error Look-up Tool [ID 153788.1]*
*Bug 6022014: ORA-600 [KRVXBPX20] ON LOGICAL STANDBY* -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
-
Single-instance manual standby for a three-node RAC database
Hi all,
I am wondering how it is possible to create a manual standby database for a rac primary database.
Oracle versione is standard edition 11.1.
I have experience creating and managing manual standby for single-instance database; I am wondering if and how I can instruct the single-instance standby database to discover and apply the three redo threads that I will copy from the primary site to the standby site.
Should I use rman to catalog all the archived log on the standby site ?
Should I configure many LOG_ARCHIVE_DEST_n parameters to point to many different path, one for each primary instance (i.e. one for each redo thread), and let rman automagically discover all the archived logs ?
Should I configure only LOG_ARCHIVE_DEST_1 , put archivelogs from all threads in the same folder, and let rman automagically discover all the archived logs ?
Thanks for every answer!
AndreaHi,
indeed i catalog all transfered archive logs in front of the recover process.
During the tests i believe (iirc) i was unable to recover from transfered archivelogs without catalog them first. But this statement is out of my mind, i am not 100% sure for this, sorry.
Some more details.
Because it is a standard edition, i have to use on the RAC side ASM. So our normal scripts to transfer archivelogs from primary to standby are obsolete.
So i decided to put the whole standby thing into the database. Now the primary database uses external scheduler jobs to do the work. The standby side is not using ASM, so there is no need to handle the logs in any special way.
The steps are:
1. Get SCN from primary and standby
2. Transfer the logs for the gap from ASM to "normal" filesystem.
3. Transfer (and compress, if not in LAN) to standby archive dest
4. Catalog on standby side
5. Recover on standby side
6. Delete on normal filesystem (on both sides, but on standby with a delay of 2 days just to be sure)
The steps on the standby side are both using the primary scn from step 1 as a parameter to avoid error messages during the catalog or recover call.
Hth
Joerg
Maybe you are looking for
-
Complete hard drive failure. Advice?
I was having hard drive issues last month that I thought were resolved, but now I'm pretty sure my internal hard drive in my iBook is totally dead. My internal hard drive started making really bad grinding noises during start up, so I booted my iBook
-
Hy guys, in order to run the command line below: C:\Program Files\Microsoft SQL Server\100\DTS\Binn\DTEXEC.EXE /F "G:\SHAREDFOLDER\PIPPO.DTSX" Does the user need to have BIDS installed in the local machine? My goal is to allow end user to run package
-
Hi we need to open, edit and save or email a Word document with VBA - we can do this through Citrix, but it is possible with an app directly on the iPad? I have tried Pages and Quickoffice. I Can open and edit, but the VBA is not working.
-
What is a good free VTS to MPG4 convertor?
Does anyone know of a free good VTS to MPG4 convertor?
-
How to use get getResourceAsStream
Gday all, I gave up trying to comprehend the API doco and tutorials on the How to use get getResourceAsStream. I don't care how the class loader locates resources... I just it to work. Now! Here's what works... and what doesn't work... package krc.ge