Datafile maximum size exceeds....

what will happen if the size of a datafile exceeds its maxsize that we have specified when datafile was created...???

sb92075 wrote:
920273 wrote:
what will happen if the size of a datafile exceeds its maxsize that we have specified when datafile was created...???an error gets thrownsorry, guess again.
SQL> create tablespace tmp1 datafile '/u01/oradata/tmp01.dbf' size 1088k autoextend on next 64m maxsize 8191m extent management local;
Tablespace created.
Elapsed: 00:00:01.11
SQL> alter database datafile '/u01/oradata/tmp01.dbf' resize 8192m;
Database altered.
Elapsed: 00:05:36.99lookie there, no error.
SQL>
select maxbytes/1024/1024 mb, bytes/1024/1024 mb from dba_data_files where file_name = '/u01/oradata/tmp01.dbf';
MB MB
8191 8192
Elapsed: 00:00:00.04

Similar Messages

ALBPM 6.0 : The maximum size for file uploads has been exceeded.

Hi,
I use AquaLogic BPM Entreprise server to deploy my Process. When I try to publish a process on my server I get the following error:
An unexpected error ocurred.
The error's technical description is:
"javax.servlet.jsp.JspException: null"
Possible causes are:
The maximum size for file uploads has been exceeded.
If you are trying to publish an exported project you should publish it using the remote project option.
If you are trying to upload the participant's photo you should choose a smaller one.
An internal error has ocurred, please contact support attaching this page's source code.
Has someone resolve it?
Thank's.

Hi,
Sure you've figured this out by now, but when you get the "Maximum size for file uploads" error during publish consider:
1. if your export project file is over 10mb, use "Remote Project" (instead of "Exported Project") as the publication source. That way when you select the remote project, you will point to ".fpr" directory of the project you are trying to publish.
Most times your project is not on a network drive that the server has access to. If this is the case, upload the .exp file to the machine where the Process Administrator is running, then expand it in any directory (just unzip the file). Then, from the Process Administrator, use the option to publish a Remote Project by entering the path to the .fpr directory you just created when unzipping the project.
2. Check to see if you have cataloged any jars and marked them as non-versionable. Most of the times the project size is big just because of the external jar files. So as a best practice, when you do a project export select the option "include only-versionable jars", that will get reduce the project size considerably (usually to Kb's). Of course you have to manually copy the Jar files to your Ext folder.
hth,
Dan

The maximum size of an SQL statement has been exceeded.

In ST22, abap dump shows that one of the possible reason was "The maximum size of an SQL statement has been exceeded."
How can I know what's the maximum size and how to compute that size had been reached?
Is this shown anywhere in the log?

1. decalre temp_key as a table.
2. use this package size option ....this gets the data in bite-sized chunks
SELECT MATKL MATNR MEINS
INTO corresponding fields of table TEMP_KEY package size 1000
FROM MARA
WHERE MATNR IN SO_MATNR.
loop at temp_key.
MOVE-CORRESPONDING TEMP_KEY TO ITAB_KEY1.
IF WS_PCHR SPACE.
CLEAR ITAB_CHAR.
CLEAR ITAB_KEY1-CHARACTER. REFRESH ITAB_KEY1-CHARACTER.
PERFORM GET_CHAR TABLES ITAB_CHAR ITAB_KEY1-CHARACTER
USING ITAB_KEY1-MATNR.
ENDIF.
APPEND ITAB_KEY1. CLEAR ITAB_KEY1.
endloop.
ENDSELECT.

DBIF_RSQL_INVALID_RSQL The maximum size of an SQL statement was exceeded

Dear,
I would appreciate a helping hand
I have a problem with a dump I could not find any note that I can help solve the problem.
A dump is appearing at various consultants which indicates the following.
>>> SELECT * FROM KNA1                     "client specified
559                  APPENDING TABLE IKNA1
560                  UP TO RSEUMOD-TBMAXSEL ROWS BYPASSING BUFFER
ST22
What happened?
    Error in the ABAP Application Program
    The current ABAP program "/1BCDWB/DBKNA1" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
     and
    therefore caused a runtime error.
    The reason for the exception is:
    The SQL statement generated from the SAP Open SQL statement violates a
    restriction imposed by the underlying database system of the ABAP
    system.
    Possible error causes:
     o The maximum size of an SQL statement was exceeded.
     o The statement contains too many input variables.
     o The input data requires more space than is available.
     o ...
    You can generally find details in the system log (SM21) and in the
    developer trace of the relevant work process (ST11).
    In the case of an error, current restrictions are frequently displayed
    in the developer trace.
SQL sentence
550     if not %_l_lines is initial.
551       %_TAB2[] = %_tab2_field[].
552     endif.
553   endif.
554 ENDIF.
555 CASE ACTION.
556   WHEN 'ANZE'.
557 try.
>>> SELECT * FROM KNA1                     "client specified
559                  APPENDING TABLE IKNA1
560                  UP TO RSEUMOD-TBMAXSEL ROWS BYPASSING BUFFER
561    WHERE KUNNR IN I1
562    AND   NAME1 IN I2
563    AND   ANRED IN I3
564    AND   ERDAT IN I4
565    AND   ERNAM IN I5
566    AND   KTOKD IN I6
567    AND   STCD1 IN I7
568    AND   VBUND IN I8
569    AND   J_3GETYP IN I9
570    AND   J_3GAGDUMI IN I10
571    AND   KOKRS IN I11.
572
573   CATCH CX_SY_DYNAMIC_OSQL_SEMANTICS INTO xref.
574     IF xref->kernel_errid = 'SAPSQL_ESCAPE_WITH_POOLTABLE'.
575       message i412(mo).
576       exit.
577     ELSE.
wp trace:
D *** ERROR => dySaveDataBindingValue: Abap-Field= >TEXT-SYS< not found [dypbdatab.c 510]
D *** ERROR => dySaveDataBindingEntry: dySaveDataBindingValue() Rc=-1 Reference= >TEXT-SYS< [dypbdatab.c 430]
D *** ERROR => dySaveDataBinding: dySaveDataBindingEntry() Rc= -1 Reference=>TEXT-SYS< [dypbdatab.c 137]
Y *** ERROR => dyPbSaveDataBindingForField: dySaveDataBinding() Rc= 1 [dypropbag.c 641]
Y *** ERROR => ... Dynpro-Field= >DISPLAY_SY_SUBRC_TEXT< [dypropbag.c 642]
Y *** ERROR => ... Dynpro= >SAPLSTPDA_CARRIER< >0700< [dypropbag.c 643]
D *** ERROR => dySaveDataBindingValue: Abap-Field= >TEXT-SYS< not found [dypbdatab.c 510]
D *** ERROR => dySaveDataBindingEntry: dySaveDataBindingValue() Rc=-1 Reference= >TEXT-SYS< [dypbdatab.c 430]
D *** ERROR => dySaveDataBinding: dySaveDataBindingEntry() Rc= -1 Reference=>TEXT-SYS< [dypbdatab.c 137]
Y *** ERROR => dyPbSaveDataBindingForField: dySaveDataBinding() Rc= 1 [dypropbag.c 641]
Y *** ERROR => ... Dynpro-Field= >DISPLAY_FREE_VAR_TEXT< [dypropbag.c 642]
Y *** ERROR => ... Dynpro= >SAPLSTPDA_CARRIER< >0700< [dypropbag.c 643]
I thank you in advance
If you require other information please request

Hi,
Under certain conditions, an Open SQL statement with range tables can be reformulated into a FOR ALL ENTRIES statement:
    DESCRIBE TABLE range_tab LINES lines.
    IF lines EQ 0.
      [SELECT for blank range_tab]
    ELSE.
      SELECT .. FOR ALL ENTRIES IN range_tab ..
      WHERE .. f EQ range_tab-LOW ...
      ENDSELECT.
    ENDF.
Since FOR ALL ENTRIES statements are automatically converted in accordance with the database restrictions, this solution is always met by means of a choice if the following requirements are fulfilled:
1. The statement operates on transparent tables, on database views or on a projection view on a transparent table.
2. The requirement on the range table is not negated. Moreover, the range table only contains entries with range_tab-SIGN = 'I'
and only one value ever occurs in the field range_tab OPTION.
This value is then used as an operator with operand range_tab-LOW or range_tab-HIGH.In the above example, case 'EQ range_tab-LOW' was the typical case.
3. Duplicates are removed from the result by FOR ALL ENTRIES.This must not falsify the desired result, that is, the previous Open SQL statement can be written as SELECT DISTINCT.
For the reformulation, if the range table is empty it must be handled in a different way:with FOR ALL ENTRIES, all the records would be selected here while this applies for the original query only if the WHERE clause consisted of the 'f IN range_tab' condition.
FOR ALL ENTRIES should also be used if the Open SQL statement contains several range tables.Then (probably) the most extensive of the range tables which fill the second condition is chosen as a FOR ALL ENTRIES table.
OR
What you could do in your code is,
prior to querying;
since your select options parameter is ultimately an internal range table,
1. split the select-option values into a group of say 3000 based on your limit,
2. run your query against each chunck of 3000 parameters,
3. then put together the results of each chunk.
For further reading, you might want to have a look at the Note# 13607 as the first suggestion is what I read from the note.

Maximum size of a datafile

What is the maximum size we can give to a datafile?

user8850066 wrote:
What is the maximum size we can give to a datafile?Use this clause to determine whether the tablespace is a bigfile or smallfile tablespace. This clause overrides any default tablespace type setting for the database.
A bigfile tablespace contains only one datafile or tempfile, which can contain up to approximately 4 billion (232) blocks. The maximum size of the single datafile or tempfile is 128 terabytes (TB) for a tablespace with 32K blocks and 32TB for a tablespace with 8K blocks.
A smallfile tablespace is a traditional Oracle tablespace, which can contain 1022 datafiles or tempfiles, each of which can contain up to approximately 4 million (222) blocks.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7003.htm#SQLRF01403
Kamran Agayev A.
Oracle ACE
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

RangeError: Maximum call stack size exceeded

Dear all,
we are executing and EDGE project in a Samsung SmartTV. In more powerful models (more memory and cpu) the execution is correct. but in some old TV models we receive the following message:
File: file://c/........../EDGE_006/edge_includes/edge.2.0.1.min.js
Line No: 135
Error Detail: RangeError: Maximum call stack size exceeded.
It seems that this happens depending on the complexity of the EDGE project, as for some simple projects it works.
we would like to adjust our EDGE project for this less powerful models modifiying animations and simplifying complexity, but we dont know where to start (which animations to remove, etc.)
Or if there are some parameters in the edge API to adjust in order to increase performance in low memory browsers.
Thank you in advance,
Luis

sunil-online wrote:
> I am calling an external DLL and running it in the UI thread. How much
> stack space is available when they are on separate threads or on the
> UI thread?
>
> The problem is that I am getting seemingly random crashes while
> running this VI and after I quit labview after stopping and uninit-ing
> my DLL.
Unless you know this DLL is using exceedingly lots of stack (at least
several dozens of MB) for whatever obscure reasons it is very unlikely
that running out of stack space is causing your problem. More likely
either the DLL does something nasty to a data pointer passed in to it or
you made an error in setting up the call to the DLL.
For instace if the DLL expects strings or array pointers to be passed in
they need to
be allocated by the caller (here LabVIEW) and you need to
tell LabVIEW to do that in the diagram code.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

C0111: Maximum script size exceeded.

Not sure if this has anything to do with it but
I am working with in the 12.6 Powerbuilder classic 30 day demo.
I just purchased 12.6 yesterday, waiting for the email to install the live copy today.
Is there anyway to increase the size on the script size maximium?
This script has 1,783 lines of code.
---------- Compiler: Errors   (10:41:49 AM)
reports.pbl(w_room_layout).pb_refresh.clicked.1780: Error       C0111: Maximum script size exceeded.
reports.pbl(w_room_layout).pb_refresh.clicked.1782: Error       C0111: Maximum script size exceeded.
reports.pbl(w_room_layout).pb_refresh.clicked.1784: Error       C0111: Maximum script size exceeded.
reports.pbl(w_room_layout).pb_refresh.clicked.1784: Error       C0111: Maximum script size exceeded.
---------- Finished Errors   (10:41:49 AM)

Actually, the size constraint is on the size of the compiled P-Code, which means you should probably watch for different things. Things that don't compile down to P-Code tokens (e.g. string constants, embedded SQL) should be reviewed carefully. If you have a lot of embedded SQL (a common trap for those new to PB), you might want to consider encapsulating that in a DataWindow, which will be more network-traffic-efficient at run time anyway.
Good luck.

OBI 11g Error : exceeds an entry's the maximum size soft limit 256

Hi All,
I am getting a Warning in EM as below:
Adding property Desc with value "+report description+". exceeds an entry's the maximum size soft limit 256. There are 333 bytes in this property for item /shared/folder/_portal/dashboardname
It happens only when, if we provide a long description text (>256 bytes) for a report in the 'Description' box while saving the report.
Do you have any ideas why it is happening and what can be done to remove this warning.
An parameter needs to be changed..??
Obi version 11.1.1.5.0
box : Unix

We tried that...
But most of the dashboards/reports have been migrated from 10g and the reports are being built by Users not Dev team, adding their own description to report.
I need to know ... if there is any parameter which can fix that...

If Dimension exceeds maximum size then what will we do???

Hi Experts,
If Dimension exceeds maximum size then what will we do???
My dought was how to increase the dimension size in SSAS 2008 R2???
i am using SQL SERVER 2008 R2.
i had faced this question in one of the interview.so,Could you explain with an example.
Best Regards,
sirikumar

You can't exceed the maximum, else you get error. The maximum is a huge number:
Object
Maximum sizes/numbers
Databases in an instance
2^31-1 = 2,147,483,647
Dimensions in a database
2^31-1 = 2,147,483,647
Attributes in a dimension
2^31-1 = 2,147,483,647
Members in a dimension attribute
2^31-1 = 2,147,483,647
User-defined hierarchies in a dimension
2^31-1 = 2,147,483,647
Levels in a user-defined hierarchy
2^31-1 = 2,147,483,647
Cubes in a database
2^31-1 = 2,147,483,647
LINK:
Maximum Capacity Specifications (Analysis Services)
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB: MALAWI .pptx.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 35 MB.
I have had my macbook pro since June and have had no problems sending an email until I have tried to send a presentation today. The above message is what I keep receiving even after using 3 email accounts.

Email providers often set file size limitations to conserve bandwidth and prevent service overload. Most common seems to be a limit on the order of 21 MB. If possible, break your presentation into two parts and send as two messages.

The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB

Dear sir/madam
I installed exchange server 2013
my clients want to attache more than 10 MB
when they attache more than 10 MB they got this massage "The following files weren't attached because adding them would cause the message to exceed the maximum size limit of 10 MB"
so how can you help me to increase the attachment size and the way to do that
how can I change the default 10 MB
Please can you help me as soon as
Rawa Zangana

Hi Rawa,
You can use EAC or EMS to set the MaxSendSize. The default value of MaxSendSize is 10 MB.
If you use EAC, here is the steps:
Logon to EAC -> Mail flow -> Receive connectors -> settings-> type the Maximum send message size you want to set
If you use EMS, please use the cmdlet Rajith provided.
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

552 Message size exceeds maximum message size

[Dell Inspiron 560 desktop;
MS Windows 7 Home Premium SP1 64bit; Windows Live Mail 2011; MS Word Pro 2003; Mozilla Firefox 22.0; Adobe FP 11,8,800,94; Adobe Reader 11.......]
Hello, I have the same problem, 10 emails I sent out bounced with the following same error message:
">>>xxxxxxxxxatxxxxxxxx.co.il(reading confirmation): 552 Message size exceeds maximum message size"
And they also sent the headers....which is all Greek to me. Being a very beginner computer user, I can't execute the good advice given here.
This is very strange since the emails so bounced only had 5 small pictures I had taken in my small, cheap dig camera, while other messages I had sent out
successfully before were probably 4 times as big.
Also, whose fault is it: my server RCN? Microsoft? I wonder...
I hope there's something easier for me to do to fix this problem?
Thanks ever so much for any help! :) Adela

It says to me that the message you sent was rejected along the way because it was too big. Ask the e-mail administrator of the system that's bouncing it.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Error: Debug Component exceeds maximum size (65535 bytes)

Hi All,
It would seem that I have come across a limitation in the CAP file format for Java Card 2.2.1. When I run the Sun 2.2.1 converter I get the following output:
Converting oncard package
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.
error: Debug Component exceeds maximum size (65535 bytes).
Cap file generation failed.
conversion completed with 1 errors and 0 warnings.This also happens with JCDK 2.2.2. Is there any way around this limitation? I can instruct the compiler to not generate some of the debug output such as variable attributes, but this makes the debugger less than useful. I could not find anything in the JCVM spec for JC2.2.1 that mentions this limitation (I could have missed it very easily if it is there). Is this a limitation that will be lifted in new versions of the standard? This is tarting to be a bit of a problem as our code base has outgrown our development tools (no more debugger). Compiling and running without debug information works fine.
Any information on this would be much appreciated.
Cheers,
Shane

For those that are interested, I found this in the Java Card VM spec. u1 and u2 are 1 and 2 byte unsigned values respectively. It would appear that it is a limitation of the CAP file format. We have managed to work around this problem (parsing the debug component of the cap file was very informative) by shortening package names, reducing exception handling, and removing classes that we could do without.
It looks like this is removed for JC3.0 Connected Edition does not have this issue as it does not have CAP files, but JC2.2.2 and JC3.0 Classic Edition have this same issue. It would be nice if there was a converter/debugger combination that removed this limitation. If anyone knows of such a combination, I am all ears! I know for a fact that JCOP does not :(
Cheers,
Shane
*6.14 Debug Component*
This section specifies the format for the Debug Component. The Debug Component contains all the metadata necessary for debugging a package on a suitably instrumented Java Card virtual machine. It is not required for executing Java Card programs in a non-debug environment.
The Debug Component references the Class Component (Section 6.8 "Class Component), Method Component (Section 6.9 "Method Component), and Static Field Component (Section 6.10 "Static Field Component). No components reference the Debug Component.
The Debug Component is represented by the following structure:
{code}
debug_component {
u1 tag
u2 size
u2 string_count
utf8_info strings_table[string_count]
u2 package_name_index
u2 class_count
class_debug_info classes[class_count]
{code}
The items in the debug_component structure are defined as follows:
*tag* tag item has the value COMPONENT_Debug (12).
*size* The number of bytes in the component, excluding the tag and size items. The value of size must be greater than zero.

ORA-29279:SMTP permanent error:552 5.3.4 Message size exceeds fixed maximum

Hi,
I can send attachments smaller than 25MB.
But my attachment is 27MB and it fails. Don't ask why I need to send this big file by email, I have to.
Where can I change this maximum size?
- any parameter in utl_smpt?
- any parameter in server where DB is located? (Linux 2.6.18-238.1.1.el5)
- any parameter in smtp machine server?
Thanks.
Joaquín González
Edited by: Joaquin Gonzalez on Apr 12, 2012 11:46 AM

The actual error, "+552 5.3.4 Message size exceeds fixed maximum+", is from the smtp server. Oracle expects a 0 return code and instead get a 522 return code in the smtp server's response (to the DATA command). So Oracle throws an exception that in turn contains the error response of the smtp server.
Interesting that you did not get the error earlier - many smtp servers have the ceiling set a lot lower and you can expect this error after sending around 5MB of data.
There are ways around this. Send the attachment as multiple fragments using a compression technology like zip or rar (where it is fairly easy for the recipient to reconstruct the source from the pieces send).
There's also another problem. The 20+ MB e-mail may be accepted by the smtp server, but the POP3, IMAP (or Exchange?) account (mail drop) may not accept an e-mail of that size.
Success is also assuming that you are delivering that mail directly to the correct/target smtp server. If not, then that e-mail needs to be relayed via a number of intermediate smtp servers before reaching the target smtp server and domain.
And there is a good chance that one of these relay servers will object to the size of the e-mail and trigger a hard bounce response.
Keeping an attachment size down to at most 3 to 5 MB is IMO the better approach as that guarantees a better chance of delivery than a 20+ MB e-mail.

Windows Server 2008 R2 Security Event Log Maximum Size

I have a customer with logging requirements on domain controllers that are exceeding the maximum log size they have configured for the security log. When they attempted to increase the maximum size of the security event log via Group Policy, the settings
did not take effect. When an attempt was made to increase the security event log manually on the domain controller via the properties of the log, an error is generated whenever the value was changed.
The Maximum Log Size specified is not valid. It is too large or too small. The Maximum Log Size will be set to the following: 196608 KB
The 196608 KB value is the value that it is currently set at. Testing on other logs, application, system, has lead to the same result.
wevtutil.exe sl security /ms:<n> produces similar results. There is no error message given but the value doesn't change when you run wevtutil.exe gl security
When viewing the registry value MaxSize under HKLM\Current Control Set\Services\EventLog\Security the change is reflected, but the log does not seem to get any larger.
What one would expect to be a two minute change in a group policy object has turned into something much more difficult. Any idea what could be causing this?
Joseph M. Durnal MCM: Exchange 2010 MCITP: Enterprise Messaging Administrator, Exchange 2010 MCITP: Enterprise Messaging Administrator, MCITP: Enterprise Administrator

I verified that it was not another policy - the domain is pretty simple without many policies, only policies applied are:
Default Domain Policy (no event log settings)
Company Domain Policy (no event log settings)
Default Domain Controller Policy (no event logs settings)
Company Domain Controller Policy (...\Event Log\Maximum security log size 4194240 kilobytes)
The value was 196608 before, the plan was to change the group policy setting to 4194240 and I expected it to be that easy. However, the values didn't change.
4194240 is divisible by 64
Used multiple tools to try and change
Group Policy
Event Viewer
wevtutil.exe
registry editor
While some of the methods display a larger event log, the actual size of the event log still seems to be limited to 196608 kb.
Thanks,
Joe
Joseph M. Durnal MCM: Exchange 2010 MCITP: Enterprise Messaging Administrator, Exchange 2010 MCITP: Enterprise Messaging Administrator, MCITP: Enterprise Administrator

Datafile maximum size exceeds....

Similar Messages

Maybe you are looking for