Datatype : 25 not supported error while saving Logical Query in BIP Dataset

Hi All,
I have created a nested logical Query in OBIEE Publisher Datamodel using parameters.
Here is the simple query :
Select name, revenue, date from
select "SubjectAreaName"."TableName"."Name" name,
case when :Date > date '2012-01-01' then "SubjectAreaName"."TableName"."Revenue" else NULL end Revenue,
date date
from
"SubjectAreaName"
where
date = :Date
) T1
Note - :Date is the parameter. When I try saving this dataset as-is, it throws me Datatype : 25 not supported error. But, when i replace the parameter :Date with actual date, then the query works. Also, the inner query works with or without parameters. The issue arises when I use the outer query and the parameters.
Please let me know if you have come across such a problem ?
Any help on this regard would be highly appreciated.
Thanks
Swarna

ya i can understand we wont do the sql logic at the data model part as some time performance issue may come when comparaed to sql run in package and sql running in data model . so i have mostly done using package and i will just do select * from table in the data set of data model so i didn't face any issue's like this .
once check this tutorial may be you already
i use to create parameters like this i didn't face any issue
SELECT * from TEST where ID=:p_id
http://st-curriculum.oracle.com/obe/fmw/bi/bip/bip11g/gettingstarted/gettingstarted.htm

Similar Messages

Queue does not exist Error while saving TO

We enabled RF Queue determination
Queues are getting determined correctly in Transfer orders as per the logic mentioned in 'Assign Areas and Activities to Queues'
We dont want queue determination for few TO's if logic is not there and ststem should not assign queue but now system is prompting message 'Queue does not exist, Message no. LRFMON502' if it could not derive queue while saving TO
Any pointers?

Hi
We enabled queue determination based on detination storage type with BADI LE_WM_RF_QUEUE, this implementation cuased us DUMP
Fixed by fine tuning queue assignment in config

Unknown Error while saving the query to My Portfolio

Hi,
We have a report published on the portal and users are accesing these reports completely through portal. After running the report user is trying to save the report to My Portfolio on the portal and it is giving an error as "Unknown Error". Anybody who faced this particular error, please give your suggestion.
Regards
Vijay

Hi Mike,
Please follow the following steps to resolve the issue:
a. Identify the list of users who are getting the unknown error while saving to My Portfolio
b. Provide a role called COM.SAP.IP.BI.Business_Explorer_Showcase
c. Once the role is provided to the users, they will get a new tab called Business Explorer in the portal and ask them to click on that tab and then click on My Portfolio button in the subsequent screens
d. Once the user clicks the My Portfolio tab this will create the KM folders in the backend for the users to save the report at the run time
e. Once this is done, ask the user to log off and log in again in to the portal
f. There after users will be able to save the queries to My Portfolio
g. Once this is resolved ask the security team to remove the COM.SAP.IP.BI.Business_Explorer_Showcase role (this role need not be given for a long time).Points.
Regards
Vijay

Getting Brain Error while saving the query--Need Immediate solution

Hello Experte
I designed query like this.
G/L account structure is defined in Rows. Before explaining about columns Let me Explain u about my ORG structure.
Company codes are defined in R/3 like this.
Company Code
1000 for Local Currency(HSL01)
2000 to 7000,IEL for group Currency(KSL01).
Iu2019m extracting the data as it is from R/3 to DSO and again by writing routine I splitter the data for months(EX: HSL01 is ApriL,Hsl02 May,u2026u2026u2026u2026u2026u2026.KSL01 April, KSL02 may,u2026u2026u2026. Upto to 16 periods) this is R/3 data. This data I differentiated based upon currency types. If currency type is 10 then Local Currency 30 Means Group Currency.
Again Iu2019m receiving the data from Flat Files for subsidiaries(IEAI,IEG,IEEL,ISSCI,IHAL,TTM-US,TTM-INDIA,TTIT). This data I loaded first into DSO by writing Routine at field Level for G/L account to convert G/L Descriptions into Numbers.
After that I loaded data from first DSO to Second DSO by writing to convert respective currencies into INR and again loaded to cube by Direct mapping.
Again Iu2019m receiving the eliminations data from R/3 through Ztable. This also Iu2019m extracting from R/3 and loaded into dso and again into cube.
Now I will Explain about my Report.
In Columns I defined 3 selections for each month. U can observe that in Document. Like that for each month Iu2019m getting three selections and for subsidiaries 2 selections for each month. If we observe total Iu2019m getting 13 selections for India and 9 selections for each subsidiary. If subsidiaries increase I need to increase selections, automatically columns will increase. Now for Q4 2 new subsidiaries are added I need to added. After adding and while saving the query then only Iu2019m getting brain error.
Could any one sort out this.
Thanks,
Sony

HI Ravi,
Thanks for the reply.
While saving the query in BEX i'm getting this error.
Diagnosis
Query ZQ3_MISGRPSUMMARYREPORT_010209 contains 8192 differing selection cells. However, only 8191 selection cells can be processed in a query.
Procedure
Please simplify query definition ZQ3_MISGRPSUMMARYREPORT_010209.
This was the error i'm getting. How to simplify this....
Any answers please.
Thanks,
Sony

Errors while saving the query

We are getting the following errors after saving the query:
1)The system tried to insert a data record, even though a data record with the same primary key already exists 0
2)An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause 0
3)Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION 0.
Not able to save the changes in Query also.
Always welcome for any ideas please...
Thanks in advance.
Bala

Hi,
Please apply the corrections from Note 1015402 using SNOTE transaction.
Regards,
Selva

Error while saving logic script

Hello Everybody,
From this morning we are having this message:
Unhandled Error (HTTP Status:500): unmarshal.invalid.xml
While trying to saving logic scripts.
Anyone know the solution?
Have tried the sap notes in the other threads but they don't seem to work.
Got BPC 10 and installed recently the SP5
thanks for help

We have gone through the below SAP notes already but no luck!
http://service.sap.com/sap/support/notes/1693703
http://service.sap.com/sap/support/notes/1649819
-Srujana

"Limits not Defined " error while saving IT0008 in sap hr

Hi Experts
While trying to Hiring an employee, infotype0008 showing Limits not defined error and not allowing to save the record. I checked table V_T510 and V_T510N. All the limits defined in right way. Please check and advice. I attached copy of screen shot for your reference.
Regards
Prakash Bhave

Hi Remi
Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
Thanks a ton.
Regards
Prakash Bhave

Error While Saving a Query in Bex

Hi All,
When I am trying to Save a query Its throwing me this error.
"An unexpected 'object variable or with block variable not set' error occured in wdbrlog."
Any pointers would be helpful.
Regards,
Mayank

Hi Manyank,
Are you using any variables, if so, please check the variables are built right manner.
Check on the Text variables also, if you are using
Regards,
Ravi Kanth

Error While Saving a query

Hi All,
When I am trying to Save a query Its throwing me this error.
"An unexpected 'object variable or with block variable not set' error occured in wdbrlog."
Any pointers would be helpful.
Regards,
Mayank

Hi Mayank,
Please check this thread..
'object variable or with block variable not set
Might help you..!!
-Pradnya

Output device not defined error while saving the quotation

Hi all,
We have some custom output types (ZGEN, ZSSO, ZQTO, ZJT)configured in the nace transaction for Application V1. Whenever i am creating / saving a quotation one of the output type(ZQTO) is not processing for mail (External Send) and it is displaying an error as 'Output device not defined'. If i remove all the output types while changing the quotation in VA22 from header, it is processing.
I checked with all other output types combination. The error is trigerred only when we have ZJT output type along with ZQTO.
We are not able to recognise the error. Please help out to solve this issue. Its very urgent.
Thanks.

Hi Remi
Thanks for your reply. As per your reply I followed procedure and it allowed me to save Basic Pay Infotype (0008)
Thanks a ton.
Regards
Prakash Bhave

[SOLVED] /bin/bash: endif: command not found ERROR while saving in vim

My .vimrc file
set expandtab
set number
syntax on
set autoindent shiftwidth=4
set smartindent
set tabstop=4
set smartcase
colorscheme elflord
set incsearch
set hlsearch
au BufWritePost * if getline(1) =~ "^#!" | if getline(1) =~ "/bin/" | silent !chmod +x <afile> | endif | endif
" Tell vim to remember certain things when we exit
" '10 : marks will be remembered for up to 10 previously edited files
" "100 : will save up to 100 lines for each register
" :20 : up to 20 lines of command-line history will be remembered
" % : saves and restores the buffer list
" n... : where to save the viminfo files
set viminfo='10,\"100,:20,%,n~/.viminfo
function! ResCur()
if line("'\"") <= line("$")
normal! g`"
return 1
endif
endfunction
augroup resCur
autocmd!
autocmd BufWinEnter * call ResCur()
augroup END
On some files, I get this error http://i.imgur.com/lKFvm.png at the bottom of vim . Please note that I get the error not on all files. Its driving me crazy!
Last edited by shadyabhi (2011-09-11 02:41:52)

Replace this:
au BufWritePost * if getline(1) =~ "^#!" | if getline(1) =~ "/bin/" | silent !chmod +x <afile> | endif | endif
with this:
au BufWritePost * if getline(1) =~ "^#!" | if getline(1) =~ "/bin/" | silent execute "!chmod a+x <afile>" | endif | endif
If the above doesn't work for you (though it should in Vim > 7), try a different way of doing the same thing:
function ModeChange()
if getline(1) =~ "^#!"
if getline(1) =~ "/bin/"
silent !chmod a+x <afile>
endif
endif
endfunction
au BufWritePost * call ModeChange()
Last edited by bohoomil (2011-09-11 02:29:58)

Error while saving the query A299 Urgent

I had created a Query on Multi provider and when i am making changes to it while creating and saving the same it is giving me a error "[A299(BRAIN)] Terminate:System error in program Cl_RSD_MULTIPROV and the form GET_PART_iOBJNM_CMP-01 "
Please Help in resolving the same thanks.\

Hello Sreekanth,
Generally this error is due to inconsistency in Multiprovider. Could you please do a dummy change for this
multiprovider and re-activate it.
This will resolve your issue,
Regards,
Arvind

Index does not exist error while running the query

Hi Everone,
I am facing some problem when i try to tun the query in BEx. When i run the query, it is giving the error "Index does not exist". Please help me out.
With Regards
Pavan
Edited by: PavanRaj_S on Mar 3, 2010 4:50 AM

Hi,
If you facing index problem go to mange create the index and you want to know what are all the infocubes not maintained index go db02 you can find out.
Regards
sivaraju

ERROR While Saving the Query

Hi
I am trying to save a a query, as YP_XXXXXXXXXX. it is giving me an error "Namespace /BIC/ must be set to changable". would anyone be able to help me out with the same
Regards
M

Hi This has been solved.
We needed to change the Object type"Query Element" to "Changeable Original". This solved our problem. there is also a realted note 337950 that can help in similar kind of problems.
Thought of sharing it with you all.
Regards
M

Error while saving Bex Query

Hi all
I created a Global RKF in Query desinger and when i click on Save button, it is throwing error
[Query name] contains errors do you want to save anyway?
why i am not able to create RKF, If i delete that RKF and click SAVE its working fine, but if I create a Global RKF it's throwing error.
What i Did is I select the option No, and tried to create again the same RKF with same Technical name then it says already RKF exists but i dont see that in any other query's too, then i logout and once again login and tried with same technical name and same RKF then it worked but for only one RKF, when i create another RKF and save query same error is showing up.
Did any one face this issue before?
Thanks

In SAP we can't create any of the objects with the same Technical name, but you can create the objects with same description with different Technical names...
You might have checked the Description which is same for the other RKF you are referring too...
Why you want to create the RKF with the same name? why don't you make use of already existing one?
If you are not able to find it ,,some body might have created and later they had deleted it. but the entry is still there in the tables.
Give a try and check out your self...

Datatype : 25 not supported error while saving Logical Query in BIP Dataset

Similar Messages

Maybe you are looking for