Date Parameters in Data Templates..

Mornin all..
How are you using date parameters in your Data templates..?
I'm trying to run a Conc Program that has a date parameter. in ORACLE Con Program the value set is setup to retrieve the format dd-MON-yyyy.
I also have this format specified in the Data Template..
<parameter name="p_paydate_from" dataType="character" />
<parameter name="p_paydate_to" dataType="character" /> ..and then again in the SELECT statement..
<![CDATA[
SELECT DISTINCT.......
TO_CHAR(ip.creation_date, 'dd-MON-yyyy') Paid_Date, sfc.faculty_code Faculty, etc..
FROM
WHERE
AND TRUNC(ip.creation_date) BETWEEN NVL(:p_paydate_from, '01-JAN-1999') AND NVL(:p_paydate_to, '31-DEC-2299')...
]]>..yet when I run the report it just ignores the data parameter and returns all records..
I know that if that this was done in ORACLE Reports I'd have to place this in AfterPFormTrigger..
IF :p_paydate_from is not null then
:lp_paydate_from := 'and ip.accounting_date >= to_date(:p_paydate_from, ''YYYY/MM/DD HH24:MI:SS'')' ;
ELSE      :lp_paydate_from := '';
END IF;
    IF :p_paydate_to is not null then
          :lp_paydate_to := 'and ip.accounting_date <= to_date(:p_paydate_to, ''YYYY/MM/DD HH24:MI:SS'')' ;
ELSE      :lp_paydate_to := '';
END IF; Question is - do I have to create a trigger and put it into my data template or am I working the date parameter wrongly..? How do you use date parameters in your Data templates..?
Many thanks for Looking..
Steven
Edited by: JackyWhite on May 14, 2010 12:20 PM

Thanks for the comments.
I am able to return records when using the code in the SELECT statement via TOAD.
I've tried specifying dates in the parameter section but it was just the same error.
The error message given when I include these date parameters when in run the Conc Program is..
[051410_022803764][][STATEMENT] 8: p_paydate_from:2010/01/01 00:00:00
[051410_022803764][][STATEMENT] 9: p_paydate_to:2010/01/21 00:00:00
--SQLException
java.sql.SQLException: ORA-01861: literal does not match format string
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)I know what the problem is, I just done know how to fix it. I'll try to explain. In ORACLE reports
In the Conc Program (running the report) The date can be entered in the format 'DD-MON-YYYY'
In the Report Oracle sends this date to the report in the format 'YYYY/MM/DD HH24:MI:SS'. To accept this date in the report the easiest method is to.....
1. Create the date parameter as a varchar(20) instead of a date type
2. In the After Parameter Trigger convert the date either into a local variable or into a lexical variable (used in the SQL query) by using the code
         to_date(:p_date_parameter_name, '''YYYY/MM/DD HH24:MI:SS'')
     srw.message(10, 'P Date from ' ||:p_date_from);
      if :p_paydate_from is not null then
          :Lp_paydate_from := 'and trunc(...............) >= to_date(:p_paydate_from,''YYYY/MM/DD HH24:MI:SS'')';
       :disp_date_from := to_char(to_date(:p_paydate_from,'YYYY/MM/DD HH24:MI:SS'),'DD-MON-YYYY');
          srw.message(10, 'LP Date from ' ||:lp_paydate_from);
      end if; etc etc etc..      end if;I know that if I can convert it somewhere somehow using that 'to_date(:p_paydate_from,...' thing then I reckon it should work..
I'm currently trying to figure out (a tad rusty at PLSQL now) how can I create an afterpform trigger to be called in the data template that does the above (basically just to convert the date format)..
PLease tell me there is an easier way!
Thanks!
Steven

Similar Messages

Date parameters for Date range

Hi,
I got a report with 2 parameters From Date and To Date and i have 2 columns items in the report absence start date and absence end date.
i have to make sure that the date range satisfies all case's
what is the best way that I can these validation rules in discoverer on these dates...?
case's are something like this:
1 (absence start date > from date; absence end date > to date)
2 (absence start date > from date; absence end date < to date)
3 (absence start date < from date; absence end date > to date)
4 (absence start date > from date; absence end date < to date)
Any help would be really appreciated.

Using conditions in Discoverer is just like specifying a where clause in SQL with AND and OR. You should be able to use conditions for what is being described below.
Are you not able to do that using conditions in your report ?

How to use Count with Date Parameters

Hello,
I am having issues using the Count() function in conjunction with date parameters.
This is a Siebel report and in my report I have 2 date parameters(From Date, To Date). In a nutshell I am basically trying to count Opportunities that has a start date within the given date period. However I don't see a reasonable way to put my date parameters within the Count() function. The reason being is that I need to have a huge chunk of code to convert the dates into a common format that can be compared, and it won't even fit within the code block in my rtf template. I am not even sure how to put multiple conditional statements inside a Count() function since all the examples I have seen are very simple.
Anyone have a suggestion on how to use Count() with date parameters?
Thanks.

Any chance you can get the date formats in the correct format from siebel?
I don't know Siebel - so I can't help you with that. If you get the correct format it is just
<?count(row[(FromDate>=date) and (date<=ToDate))?>
Otherwise the approach would probably need to use string function to get year/monthd/day from the date
and store it into a varialbe and compare later the same way
<?variable@incontext:from; ....?>
<?variable@incontext:to; ...?>
<?count(row[($from>=date) and (date<=$to))?>
Potentially you can use the date functions such as xdofx:to_date to do the conversion
[http://download.oracle.com/docs/cd/E12844_01/doc/bip.1013/e12187/T421739T481158.htm]
But I am not sure if they are available in your siebel implementation.
Hope that helps

Defaulting Date Parameters

Post Author: tegage
CA Forum: Formula
I have many reports that allow the user to specifiy a starting and ending date range. I would like the reports to default to all dates. I can do this by defaulting the start date to "01-01-2000" and the end date to "12-31-2099", but then the calendar tool is useless since there is no TODAY button on the calendar tool and it picks up the default date, i.e., the users will have to do a lot of scrolling through the calendar tool.
The other way is to make the starting and ending date parameters strings and use values like Today, This Week, This Month,.... and reolve them in the record selection formula. This would be nice, but then if the user wants a specific date range, they don't have the calendar tool to use.
Is there a way to take advange of the user-friendliness of string values and still have the calendar tool to use?

Post Author: tegage
CA Forum: Formula
Thanks much for the response.
I had done exactly what you described - I had a string parameter for Today, This Week, etc and a set of date parameters - Starting and Ending Date. But, in order to use the Starting and Ending dates in a formula, I had to provide them a default value - leaving them blank causes the record selection formula to explode. The issue here is that the calendar tool picks up the default value instead of showing today's date.
I did more web surfing and found the answer on the Business Objects web site. The solution let me do what you suggested AND keep the Starting and Ending date parameters as Date types and defaulted to blank by making them optional parameters.
From the Business Objects web site (why isn't this stuff in the user's guide?):
2. Control over default values.
3. Request for an 'ALL' value.
Both of requirements 2 and 3 are met with the new optional parameter feature of CR 2008. When a parameter is flagged as 'optional', the report can execute without that value being set. The trick here is that any formula that attempts to reference an optional parameters that doesn't have a value set will return an error. So we've introduced the new HasValue() function which allows you to check and see if the parameter has a value.
This is really powerful, because now you can reference your parameters indirectly through another formula (or custom function) that checks if the parameter has a value or not. If it does, then the formula returns the parameter value. If it doesn't, then it can return whatever default value you wish. So if you want the default to be the day before, or last Friday, then you can code that logic into your formula that uses HasValue to check if the parameter has a value set or not.
Optional parameters were also intended to solve the 'All' problem. Basically, you want a parameter to participate in a record selection formula only if it has a value. If it doesn't, then you want that filter to be disabled. By using optional parameters and HasValue() in your record selection (and new saved data section) formulas, you can include conditions in your filter only if the parameters in those conditions have a value.

BAM : Date parameters

Hi , We have a report level paramters : start date and end date.
These two parameters we would like to default to sysdate-1 and sysdate.
start date should default to sysdate-1
end date should default to sysdate
How do we achieve this ?
Thanks,
Satish

Thanks for your reply, but it didn't satisfy my requirement.
Here is the detail requirement.
1. I have 4 views on a single dashboard
2. I have two date parameters (Start Date and End Date) (dashboard level) . Once I select these dates , it will refresh all the 4 views that are there on the dashboard.
3. To implement point 2 above , I added filters to all the 4 views pointing to the report level parameters(Report Start time and End time).
4. Now I want these two report level parameters to be defaulted to sysdate and sysdate -1 so that first time when dashboard opens, it apply these default conditions. after the report opens, User should be able enter his own date range and it needs to reflect in the report.
Please suggest how to implement the above.
In addition to above , How would I build filters with (all OR conditions, AND and OR conditions) ? Whats the use of (add new header) in the filters tab ? Is this helps in building AND OR conditions in the report ?
Thanks,
Satish

Pass date parameters to dataprocessor in Java

Hello I have created java class to execute data templates, but I have problem when I pass date parameters as it was from application dataprocessor fails without any error message and does not return any data (except output xml file header). How to pass date parameters correctly?
import java.sql.*;
import oracle.apps.xdo.dataengine.DataProcessor;
import com.sun.java.util.collections.Hashtable;
class oraConn
public static void main (String args []) throws SQLException
System.out.println("Start");
try {
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
java.util.Properties ora_property = new java.util.Properties();
Connection conn =
DriverManager.getConnection("jdbc:oracle:thin:user/pass@host:port:sid");
try {
DataProcessor dataProcessor = new DataProcessor();
dataProcessor.setDataTemplate("/home/user/definition.xml");
Hashtable parameters = new Hashtable();
parameters.put("c_period_start_date","2009/01/01 00:00:00");
parameters.put("c_period_end_date","2009/12/31 00:00:00");
parameters.put("c_employed_before_date","");
parameters.put("c_org_hierarchy","63");
dataProcessor.setParameters(parameters);
dataProcessor.setConnection(conn);
dataProcessor.setOutput("/home/user/Out.xml");
dataProcessor.processData();
} catch (Exception e)
{System.out.println ("Data procesor Fail.");}
} catch (SQLException ex) {
System.out.println ("\n*** SQLException caught ***\n");
while (ex != null) {
System.out.println ("SQLState: " + ex.getSQLState ());
System.out.println ("Message: " + ex.getMessage ());
System.out.println ("Vendor: " + ex.getErrorCode ());
ex.printStackTrace();
ex = ex.getNextException ();
System.out.println ("");
}}}}

Found out solution to my problem. I needed to import date not as string but as Date type.

Query on fetching the no.of days between Invoice date and due date in rtf template embedded BI Publisher Report

Hi Experts,
We have a requirement to fetch the value of 'No of days' between Invoice date and due date (Two variable date fields on the template) in an Analysis.
Please let me know the procedure of how to achieve the same.
Regards,
Rev

it's good for ideas but implementation a bit different
Oracle Business Intelligence Publisher Report Designer's Guide
This function provides a method to get the difference between two dates in the given locale. The dates need to be in "yyyy-MM-dd" format. This function supports only the Gregorian calendar. The syntax is as follows:
<?xdoxslt:date_diff(‘format’, ‘YYYY-MM-DD’, ‘YYYY-MM-DD’, $_XDOLOCALE, $_XDOTIMEZONE)?>
where
format is the time value for which the difference is to be calculated
Example:
<?xdoxslt:date_diff(‘d’, ‘2006-04-08’, ‘2006-04-01’, $_XDOLOCALE, ‘America/Los_Angeles’)?>
returns
-7

How can I reference records outside the two date parameters?

Hi all,
I have a query that fetches records based on the two date parameters defined (Startdate and Enddate).
If the Startdate is 2014-12-01 and the Enddate is 2014-12-12, I want to pull records outside these two date parameters, that is 2014-09-01 and 2014-11-30.
I want to add up the records from 2014-09-01 and 2014-11-30 and include them in one of the columns in my report.
I tried using this query:
SUM(CASE WHEN FilteredIncident.Statuscodename IN ('QUEUED', 'ASSIGNED') AND (EnteredOn >= '2014-09-01' AND EnteredOn<= @StartDate) THEN 1 ELSE 0 END) AS OpenRecords
Please help with any ideas..thanks

Please follow basic Netiquette and post the DDL we need to answer this. Follow industry and ANSI/ISO standards in your data. You should follow ISO-11179 rules for naming data elements. You should follow ISO-8601 rules for displaying temporal data. We need
to know the data types, keys and constraints on the table. Avoid dialect in favor of ANSI/ISO Standard SQL. And you probably need to read and download the PDF for:
https://www.simple-talk.com/books/sql-books/119-sql-code-smells/
There is no such crap as a “status_code_name” in RDBMS. It has to be a “<something in particular>_status”; think about how silly that data element name is! Want to keep going and have a “status_code_name_value_id”? LOL!
The name “Filtered_Incident” is also wrong. Tables are sets, so unless you have only one element in this set, the table name should be a plural or (better) collective name. But a better question is why did you split out “Filtered_Incidents” from “Incidents”?
Would you also split “Male_Personnel” and “Male_Personnel” from “Personnel”?
Get a book on data modeling and learn some basics.
>> I have a query that fetches records [sic: rows are nor records] based on the two date parameters defined (report_start_date and report_end_date). If the report_start_date is 2014-12-01 and the report_end_date is 2014-12-12, I want to pull records [sic]
outside these two date parameters, that is 2014-09-01 and 2014-11-30. I want to add up the records [sic] from 2014-09-01 and 2014-11-30 and include them in one of the columns in my report. <<
Having no DDL and no sample data makes this hard. Does your boss make you program without any documentation, DDL, etc? This spec is vague; you say to do a total, but show a count, etc.
One of the many nice things about DATE data types is that the BETWEEN predicate works with them, so you can quite writing 1960's BASIC predicates with primitive logic operators.
Here is a guess:
SELECT SUM(CASE WHEN incident_date BETWEEN '2014-09-01'
AND @report_start_date THEN 1 ELSE 0 END)
AS open_record_cnt
FROM Incidents
WHERE incident_status IN ('QUEUED', 'ASSIGNED')
AND incident_date <= @report_end_date;
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Problem with passing date parameters in cursor

Is there any problem in passing date parameters and like clause as below
CURSOR eftcursor(start_date DATE, end_date DATE, where_clause varchar2) IS
select * from r_records
where created_date between start_date and end_date and description like where_clause;
and in the open statement
select to_date('01/06/2010 00:00:00', 'dd/mm/yyyy hh24:mi:ss') into startDate from dual;
select to_date('01/07/2010 00:00:00', 'dd/mm/yyyy hh24:mi:ss') into endDate from dual;
str := '%something%aaaaa%';
open eftcursor(startDate ,endDate , str);
Do i need to do any kind of conversion in the cursor where clause or when i am passing the parameter in open statement.

Almora wrote:
Do i need to do any kind of conversion in the cursor where clause or when i am passing the parameter in open statement.No, your code looks correct -- ou're passing a date to the cursor.
You might consider whether you really need an explicit cursor though. An implicit cursor is easier to code and performs better.

Date Parameters in Report

Hello,
I am using the Where property of an Open Report for date parameters. There are reason i can not use the query criteria process.
Can I do this with more than one parameter?
Private Sub EligibilityReportPreview_Click()DoCmd.OpenReport "EligibilityRpt2",acViewPreview,,"effective_date >= LowEffectiveDate And effective_date <= HighEffectiveDate"End Sub
How do add another parameter like
DoCmd.OpenReport "EligibilityRpt2", acViewPreview, , "effective_date >= LowEffectiveDate And effective_date <= HighEffectiveDate"
Or "termination_date >= LowTerminationDate And termination_date <= HighTerminationDate"
Gee

If all names referred to are fields in the record source of the report, you can use
DoCmd.OpenReport "EligibilityRpt2", acViewPreview, , "effective_date >= LowEffectiveDate And effective_date <= HighEffectiveDate Or termination_date >= LowTerminationDate And termination_date <= HighTerminationDate"
Regards, Hans Vogelaar (http://www.eileenslounge.com)

How to display no data found in RTF template ? XML Publisher

Hi
I have xml file, how to display no data found in RTF template ? XML Publisher ?
This is the XML File
<?xml version="1.0" encoding="UTF-8"?>
<INVALIDSERIALPRODUCT>
<P_ORG_CODE></P_ORG_CODE><P_DATE_RANGE_FROM></P_DATE_RANGE_FROM><P_DATE_RANGE_TO></P_DATE_RANGE_TO><P_ITEM_NUMBER>VIR</P_ITEM_NUMBER><P_LOT_NUMBER></P_LOT_NUMBER><P_RMA_NUMBER_FROM></P_RMA_NUMBER_FROM><P_RMA_NUMBER_TO></P_RMA_NUMBER_TO><P_CUSTOMER_NAME></P_CUSTOMER_NAME><P_EMAIL></P_EMAIL>
<G_SNQ>
<USER_NAME>NSAWHNEY</USER_NAME>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:13:05.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:52:23.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000016</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T05:53:06.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>011000000011</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:09:16.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number does not exist in Axway Track-n-Trace</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000021</SERIAL_NUMBER>
<RMA_NUMBER>8200000106</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:11:09.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000001</SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T06:46:04.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000001</SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T07:08:21.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>00000000004 </SERIAL_NUMBER>
<RMA_NUMBER>8200000066</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T07:13:05.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Unknow Error </REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000011</SERIAL_NUMBER>
<RMA_NUMBER>8200000101</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-11T19:32:00.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000004</SERIAL_NUMBER>
<RMA_NUMBER>8200000107</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-14T02:49:40.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000092</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-14T07:52:22.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000031</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T02:24:27.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000034</SERIAL_NUMBER>
<RMA_NUMBER>8200000109</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T02:30:28.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Catchall fault scope has been executed</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000010</SERIAL_NUMBER>
<RMA_NUMBER>8200000114</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T03:36:18.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
<G_SN>
<ITEM_NUMBER>VIR823010</ITEM_NUMBER>
<DESCRIPTION/>
<LOT_NUMBER>Viread 245mg,Korea</LOT_NUMBER>
<SERIAL_NUMBER>000000000158</SERIAL_NUMBER>
<RMA_NUMBER>8200000114</RMA_NUMBER>
<CUSTOMER_NAME>Yuhan Corporation Korea</CUSTOMER_NAME>
<COUNTERFEIT_CHECK_DATE>2014-07-15T04:19:48.000-07:00</COUNTERFEIT_CHECK_DATE>
<REASON>Serial number and lot combination not valid in Axway Track-n-Trace.</REASON>
</G_SN>
</G_SNQ>
</INVALIDSERIALPRODUCT>
thanks
nks

This is the General XML forum.
The homepage description says :
Discussion of the general XML language, standards (XSLT, XQuery, XMLSchema, etc.) and application management issues, suggestions and tips.
The BI Publisher forum is here :BI Publisher
So please mark this post as answered and ask again over there.

How can i print data in bi publisher template across wise

Hi,
Please let me know how can i print data in bi publisher template across wise.
eg.
In my C1 field there is a data coming like
S
JR
MR
i want to print this filed
S JR MR
Thanx
Arjun

Hi ,
Now i am able to print S JR MR horizontally.Thanx a lot for that.Now my problem is
There is one column field which displaying value like S JR MR
Now i am calculating a value using a function and want to display that value for each vale of above column
For eg
The report should display like this
C1 C2 C3
45 1-2-3 S JR MR
45*1 2*45 3*45
I have created package to make the string 1-2-3 separeate and the fuction is working fine .But unable to print value in bi
Its displaying like this for each S JR MR
45*1 2*45 3*45 45*1 2*45 3*45 45*1 2*45 3*45
45*1 is in different group that should display also horizontally thats why i tried this <?for-each@cell:G_STR_ID?>
Please help me
Thanks in advance

How to change dispaly format of Due Date in BPA Invoice Template (11.5.10)

Hi,
I've modified the Invoice Template through template management in Bill Presentment Architecture (BPA). I copied the default layout and made the format changes, added our company logo etc. The only thing that I'm unable to do is change the format of the date Content Items like Billing Date and Due Date (TERM_DUE_DATE). Does anybody know how I can do that.
Thanks for your help
-Asif

Jassing,
Thank you for the hint about preferences. I didn't think about that.
The date formats are suppose to follow the format setup in personal preferences. But it turns out that there is a bug that just the 'Due Date' in BPA Invoice template is not following that. The other dates are displaying according to the format in preferences. So we'll be applying a patch to fix it. Hopefully that will fix it
Asif

Date Parameters

Hi,
Please see my query below,
I'm having a bit of trouble with my date parameters.
If $P{from_date} = 01-Jan-2010
and $P{to_date} = 02-Jan-2010
Is there a reason why i'm not getting any data for 02-Jan-2010?
It's probably something simple that i'm missing.
select
count(tag_id),
itl.sku_id,
itl.client_id,
itl.reference_id,
sum(itl.update_qty),
to_char(trunc(itl.dstamp), 'DD-Mon-YYYY') rec_date,
to_char(sysdate, 'DD-Mon-YYYY | HH24:MI:SS') as systemdate,
to_char(trunc(itl.expiry_dstamp), 'DD-Mon-YYYY') exp_date,
s.ship_shelf_life as sku_shelf_life,
s.ship_shelf_life + 2 as plus_shelf_life,
(trunc(itl.expiry_dstamp) - (s.ship_shelf_life + 2)) - trunc(sysdate) as plus_days_left,
(trunc(itl.expiry_dstamp) - (s.ship_shelf_life + 2)) - trunc(itl.dstamp) as plus_days_left_when_rec,
(trunc(itl.expiry_dstamp) - trunc(itl.dstamp)) as clear_days
from inventory_transaction itl, sku s
where s.sku_id = itl.sku_id
and ($P{from_date} is null or ($P{from_date} is not null and itl.dstamp >= to_date($P{from_date}, 'DD-Mon-YYYY')))
and ($P{to_date} is null or ($P{to_date} is not null and itl.dstamp <= to_date($P{to_date}, 'DD-Mon-YYYY')))
and itl.code = 'Receipt'
group by itl.sku_id, itl.client_id, to_char(trunc(itl.expiry_dstamp), 'DD-Mon-YYYY'), to_char(trunc(itl.dstamp), 'DD-Mon-YYYY'),
itl.reference_id, s.ship_shelf_life, s.ship_shelf_life + 2, (trunc(itl.expiry_dstamp) - (s.ship_shelf_life + 2)) - trunc(sysdate),
(trunc(itl.expiry_dstamp) - (s.ship_shelf_life + 2)) - trunc(itl.dstamp), (trunc(itl.expiry_dstamp) - trunc(itl.dstamp))
order by itl.client_id, itl.sku_idThanks in advance,
SM.

Sam Mardell wrote:
Is there a reason why i'm not getting any data for 02-Jan-2010?Yes :) Every date has an hours, minutes and seconds component. When you apply the TO_DATE() function on a character string that just contains month, day, and year the time component defaults to midnight (00:00:00). There are multiple methods to get around this:
< to_date($P{to_date}, 'DD-Mon-YYYY') + 1
<= to_date($P{to_date} || '23:59:59', 'DD-Mon-YYYY HH24:MI:SS')
<= to_date($P{to_date}, 'DD-Mon-YYYY') + (60*60*24 - 1)Above are just examples, there are many more ways to achieve this.
HTH!

Showing item created date in custom alert template

Hi,
I'm working on customizing the sharepoint alert templates for my site collection.
I got good info on net regading the modifications to be made. But unfortunately, I couldn't fine info about showing the
Created Date column of the item.
I need to show the item created data and modiifed date vlaues in my alert email,
I've 'TimeStamp' property which shows the modiifed date. But Im not getting equivalent property for created date.
I've tried the below options
NewValue#Created
NewValue#ItemCreated
OldValue#Created
DisplayName#Created
None of them are showing hte created date of item.
There is one attribute 'RawValue' which is giving the created date. but it's display format is really not user friendly
It shows date as 2013-09-08 T 11,40..Z
Is there any way to show item created date in alert emails? I dont want to use custom code for it.
I need to use OOB approach. Or atleast is there a way to format the above date displayed thru 'RawValue' attribute.

Thanks Arif, it did not work. One note though, if we are using the field name we do not use the brackets:
<GetVar Name=”OldValue#Created_x0020_Date”
/>
Both with and without brackets did not
work.
Thanks for the suggestion,
Mike

Date Parameters in Data Templates..

Similar Messages

Maybe you are looking for