Date search help in module pool programming in 4.6C version

Hi Experts,
How can i have input help in my module pool screen, I gave the searh help EXT_DATE in the search help parameter of that screen's field parameter.
But its not showing the input help.
I m facing this issue in 4.6C.
Please advise
Thanks
Yogesh Gupta

Hi,
Just to make sure that you are talking about F1 help and not F4 for input of date right?
For F1 help of screen field, please check program for tcode: F150 (Dunning Run), You will find FM: F150_FIELD_SELECTION_HELP used for one field on screen (112).
I guess this might help you.
thanks,
Ags.

Similar Messages

Search help in module pool programming

Hi Guys.
I am strugging with the following scenario.
When i entered value in one field, getting the search help for another field...correct one.
But when i changed the value in the first field, the search help for another field is still the same
and is not changind based on changes value. Here is the code. Plz try to help me out.
SELECT JOURNALRESCODE JOURNALRESNAM JOURNALCATCODE JOURNALCATDIV
 JOURNALRESTYPE
 FROM YCALCJOURNALRES
 INTO CORRESPONDING FIELDS OF TABLE GI_CATREASON
 WHERE JOURNALCATCODE = YCALCJOURNALCAT-JOURNALCATCODE
 AND JOURNALCATDIV = V_EANL-SPARTE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'JOURNALRESCODE'
 VALUE_ORG = 'S'
 TABLES
 VALUE_TAB = GI_CATREASON
 RETURN_TAB = RETURN_TAB
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
ELSE.
 READ TABLE RETURN_TAB INDEX 1 ASSIGNING <DDSHRETVAL>.
 IF SY-SUBRC = 0.
 YCALCJOURNALRES-JOURNALRESCODE = <DDSHRETVAL>-FIELDVAL.
 CLEAR RETURN_TAB.
 REFRESH RETURN_TAB.
 CLEAR:GI_CATREASON,GI_CATREASON[].
 ENDIF.
ENDIF.
Regards,
reddy.s

Hi Guys.
I got the solution and thanx for all ur replies. I need some more help from u guys.
The drop down contains values of four fields. Now the return table from the fm F4IF_INT_TABLE_VALUE_REQUEST contains information about one retfield since i mentioned one retfield.. So far so good.
Now my question is how can i get information about the 2nd field in the same dropdown?
 How can i mention the second retfield in the function module mentioned above?
Thanx and Regards,
surya.

Issue With Search Help in Module Pool

Dear All,
I have an Issue with Search help. I have created a Module Pool Program. In this module pool, User requires the search helps for the fields.
Imagine there are 3 fields on a screen. Field1, field2 and field3.
Field2 entries depends on field1 and field3 entries depends on field1 and field2.
I have created a collective search help. and created the corresponding Ztables to maintain the search help entries.
Now I assigned the same collective search help to both the fields . i.e. field2 and field3. But when i execute the module pool program, and press F4 on these fields , the data shown is write. BUT for the 3rd field, when I select F4, The second field values are transfered to the screen, instead of third field value.
Any Idea will be appreciated .
Help me , Its very Urgent.
Regards,

Did you check the screen field names & search help name? is it identical & unique?
Raja T

How to Use F4 help in Module Pool Programming??????

Hi Friends,
This is Jagadeesh, I have an issue Module Pool Programming. Any of you can go through on this and can give an required answer.
Issue is as follows,
I have an Input/Output field for that i need to give f4 help, based on that field the related data should sit in to my table control. The thing is there is no relation between the input/output field and the table control fields.
Is this possible? If so how can i do this.

Hi Jagadeesh,
For F4 Values on Screen:
PROCESS ON VALUE_REQUEST
using module call starting with FIELD i.e FIELD field MODULE module
There are number of function modules that can be used for the purpose, but these
can fullfill the task easily or combination of them.
DYNP_VALUE_READ
F4IF_FIELD_VALUE_REQUEST
F4IF_INT_TABLE_VALUE_REQUEST
POPUP_WITH_TABLE_DISPLAY
DYNP_VALUE_READ
This function module is used to read values in the screen fields. Use of this
FM causes forced transfer of data from screen fields to ABAP fields.
There are 3 exporting parameters
DYNAME = program name = SY-CPROG
DYNUMB = Screen number = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
and one importing TABLE parameter
DYNPFIELDS = Table of TYPE DYNPREAD
The DYNPFIELDS parameter is used to pass internal table of type DYNPREAD
to this FM and the values read from the screen will be stored in this table.This
table consists of two fields:
FIELDNAME : Used to pass the name of screen field for which the value is to
be read.
FIELDVALUE : Used to read the value of the field in the screen.
e.g.
DATA: SCREEN_VALUES TYPE TABLE OF DYNPREAD ,
SCREEN_VALUE LIKE LINE OF SCREEN_VALUES.
SCREEN_VALUE-FIELDNAME = 'KUNNR' . * Field to be read
APPEND SCREEN_VALUE TO SCREEN_VALUES. * Fill the table
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = SCREEN_VALUES.
READ TABLE SCREEN_VALUES INDEX 1 INTO SCREEN_VALUE.Now the screen value for field KUNNR is in the SCREEN_VALUE-FIELDVALUE and can be used for further processing like using it to fill the internal table to be used as parameter in F4IF_INT_TABLE_VALUE_REQUEST ETC.
F4IF_FIELD_VALUE_REQUEST
This FM is used to display value help or input from ABAP dictionary.We have to pass the name of the structure or table(TABNAME) along with the field name(FIELDNAME) . The selection can be returned to the specified screen field if three
parameters DYNPNR,DYNPPROG,DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
F4IF_INT_TABLE_VALUE_REQUEST
This FM is used to dsiplay values stored in an internal table as input
help.This FM is used to program our own custom help if no such input help
exists in ABAP dictionary for a particular field. The parameter VALUE_TAB is used to pass the internal table containing input values.The parameter RETFIELD
is used to specify the internal table field whose value will be returned to the screen field or RETURN_TAB.
If DYNPNR,DYNPPROG and DYNPROFIELD are specified than the user selection is passed to the screen field specified in the DYNPROFIELD. If RETURN_TAB is specified the selectionis returned in a table.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = field from int table whose value will be returned
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = internal table whose values will be shown.
RETURN_TAB = internal table of type DDSHRETVAL
EXCEPTIONS
parameter_error = 1
no_values_found = 2
others = 3.
POPUP_WITH_TABLE_DISPLAY
This FM is used to display the contents of an internal table in a popup window.The user can select a row and the index of that is returned in the CHOISE
parameter.The VALUETAB is used to pass the internal table.
A suitable title can be set using TITLETEXT parameter. The starting and end position of the popup can be specified by the parameters STARTPOS_COL / ROW and ENDPOS_ROW / COL .
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL =
ENDPOS_ROW =
STARTPOS_COL =
STARTPOS_ROW =
TITLETEXT = 'title text'
IMPORTING
CHOISE =
TABLES
VALUETAB =
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
e.g.
DATA: w_choice TYPE SY-TABIX.
DATA: BEGIN OF i_values OCCURS 0 WITH HEADER LINE,
values TYPE I,
END OF i_values.
PARAMETRS : id TYPE I.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR id
i_values-values = '0001'.
APPEND i_values.
i_values-values = '0002'.
APPEND i_values.
i_values-values = '0003'.
APPEND i_values.
i_values-values = '0004'.
APPEND i_values.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
ENDPOS_COL = 40
ENDPOS_ROW = 12
STARTPOS_COL = 20
STARTPOS_ROW = 5
TITLETEXT = 'Select an ID'
IMPORTING
CHOISE = w_choice
TABLES
VALUETAB = i_values
EXCEPTIONS
BREAK_OFF = 1
OTHERS = 2.
CHECK w_choice > 0.
READ TABLE i_values INDEX w_choice....now we can process the selection as it is contained
...in the structure i_values.
Other FM that may be used to provide input help is HELP_START .
regards,
Dj
reward for all useful answers.

F4 Help In Module Pool Program

Hi experts,
 How to create F4 help for an input field on selection screen in module pool program.'
I have developed a module pool program. On selection screen
when i press F4 on vbeln field then it should display and the order numbers along with item numbers i.e both VBELN AND POSNR VALUES.
Thanks & Regards
Neelesh

hi,
try this one.......
PROCESS ON VALUE-REQUEST.
FIELD ZVLOAD_PROD_COMB-LOC_NO MODULE VALUE_LOC_NO.
code inside MODULE -
VALUE_LOC_NO
DATA : BEGIN OF INT_TAB_ID OCCURS 0,
 TAB_ID TYPE ZALOAD_PROD_COMB-TAB_ID,
 END OF INT_TAB_ID.
DATA : LOC_MAX TYPE ZALOAD_PROD_COMB-TAB_ID.
CLEAR INT_TAB_ID.
REFRESH INT_TAB_ID.
SELECT MAX( TAB_ID) INTO (LOC_MAX) FROM ZALOAD_PROD_COMB.
COUNT = LOC_MAX + 1.
DO 10 TIMES.
 MOVE COUNT TO INT_TAB_ID-TAB_ID.
 APPEND INT_TAB_ID.
 COUNT = COUNT + 1.
ENDDO.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'TAB_ID' u201C Internal table field name
 DYNPPROG = 'PROG_NAME u201C Program name
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'TAB_ID' u201C Field where u need F4 help
 VALUE_ORG = 'S'
 WINDOW_TITLE = u2018Any descriptionu2019
 TABLES
 VALUE_TAB = INT_TAB_ID. u201C Internal table name
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
reward points if useful.......:-)
and mark the post answered once ur problem is solved ....

Plz send some help on module pool programming

send some help on module pool programming

Bluefox,
SDN is not providing online learnning program. it is a forum catagery place where guys comes with real time problems.
you should try to search by your self in GOOGLE.
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
please close this thread.

Need help in module Pool programming.

Dear gurus
I'm stuck in a step of Module Pool program
Steps i used for enhancement in XK01.
1) i appended a structure in table LFA1 having two fields A and B.
2) then i went to IMG-> Logistic -> Business Partner-> Vendor -> Adoption of Customer's Own Master Data Fields -> Prepare     Modification-Free Enhancement of Vendor Master Record ( Here i created my screen group Z1 without Function Code.
3) then i created below module pool program. of screen 9999 and in layout i added to fields to display A and B which i appended.
PROGRAM ZSNAK_XK01.
TABLES: lfa1.
module status_9999 output.
endmodule.                 " status_9999 OUTPUT
module user_command_9999 input.
endmodule.
4) After this i wen to IMG-> Logistic -> Business Partner-> Vendor -> Adoption of Customer's Own Master Data Fields ->
    Business Add-In: Processing of Master Data Enhancements ( Here i created my implementation on method CHECK_ADD_ON_ACTIVE and added this code
if i_screen_group eq 'Z1'.
e_add_on_active = 'X'.
endif.
5) then i went to   IMG-> Logistic -> Business Partner-> Vendor -> Adoption of Customer's Own Master Data Fields ->
   Business Add-In: Customer Subscreens. and created my implementation on method GET_TAXI_SCREEN where i have written this code.
e_screen = '9999'.
e_program = 'ZSNAK_XK01'.
e_headerscreen_layout = ''.
After activation when i execute t-code XK01 i see my button there after INFORMATION BUTTON when i click on it i get following error.
Incorrect screen type: Screen is incorrectly defined or used.
The attribute screen type with the values 'Normal Screen' and
'Subscreen' determines the use of the screen. If a normal screen is used
   as subscreen or vice versa, an error occurs.
The screen "ZSNAK_XK01" 9999 has, in this respect, an inappropriate screen
   type.
Please guide me
Regards
Saad Nisar.

I think you have defined the screen 9999 as normal screen. go to attributes tab of the screen and make it as "subscreen' (radio button) and activate
a®

F4 help in module pool programming

Hi All,
I have a requirement in module pool programming.
I have two fields on the screen. When I press F4 help on one field, it should fill both the fields with the respective values.
For example, I have G/L account and cost center for a Plant. when I click F4 for G/L, both G/L and cost center should be filled with the respective values.
Thanks in advance.

Hi,
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
              EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'Zxxx'-------secondfield
    PVALKEY                = ' '
    DYNPPROG               = ' '
    DYNPNR                 = ' '
    DYNPROFIELD            = ' '
    STEPL                  = 0
      WINDOW_TITLE           = 'abcdef'
    VALUE                  = ' '
      VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    TABLES
      VALUE_TAB              = itab_details-zfirst----main field
    FIELD_TAB              =
      RETURN_TAB             = it_return
    DYNPFLD_MAPPING        =
   EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
        if sy-subrc = 0.
          clear itab_details.
          read table it_return index 1.
          itab_details-zxxx = it_return-fieldval.
      read table itab_details with key zxxx = itab_details-zxxx.
          itab-zxxx = itab_details-zxxx.
          itab-zabc = itab_details-zabc.
        endif.
let me know if you need anything
Thanks
Venki

How to have a search help in module pool without using Process on value req

Can someone please tell me what r the ways if any to have F4 help in the module pool screen
with out using POV ?

Hi,
They are two ways to define search help for an object...
BY using POV
or
go to screen Layout and double click on the field you want F4 help and Pass the Search help math code for feild at the
place of Search_help field aand also you can add parameter-id at this place to provide search help.
go to screen Layout -->double click on the field you want F4 help
-->Pass the Search help math code for feild at the place of Search_help
save and activate..
reagrds,
Prabhudas

Regarding F4 help in Module pool Programming

Hi folks,
      I have created a Screen in Module pool. I have to attach a F4 help for a field. I did that using the Function Module 'F4IF_INT_TABLE_VALUE_REQUEST'. Its working fine, but the when i click the value in the window, correct field value is not coming to the screen field. I have to get the value of first field in that window, but the value of the last field is coming to the screen. I have cheked the return table in debugging. It getting the value of last field, but not the first field. I have given the correct field value in the retfield parameter. Can any body suggest me why its not coming..
                              Thanks and Regards,
                              Shyam.

Hi Ramachander,
           I have already passed 'S' to value_org.
Please find my source code below.
MODULE set_hodf4 INPUT.
MOVE 'IT_HODF4-DEPTID' TO iretfield.
REFRESH it_hodf4.
SELECT DISTINCT deptid
                  bukrs
                  werks FROM zmm_ktph_hodmail INTO TABLE it_hodf4.
DESCRIBE TABLE it_hodf4 LINES my-tfill.
CASE my-tfill.
    WHEN '0'.
* No & entries found.
      MESSAGE i005.
    WHEN OTHERS. "Get F4 help
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
*    DDIC_STRUCTURE              = ' '
          retfield               = iretfield
*   DYNPPROG               = ' '
*   DYNPNR                 = ' '
*   DYNPROFIELD            = ' '
         window_title           = c_hod
         value_org              = 'S'
         display                = 'F'
* IMPORTING
*   USER_RESET             =
        TABLES
         value_tab              = it_hodf4
         return_tab             = f4_hod
       EXCEPTIONS
         parameter_error        = 1
         no_values_found        = 2
         OTHERS                 = 3
      IF NOT f4_hod[] IS INITIAL.
        MOVE f4_hod-fieldval TO zmm_ktph_hodmail-deptid.
      ENDIF.
ENDCASE.
ENDMODULE.                 " set_HODf4 INPUT
Thanks,
Shyam.
Code Formatted by: Alvaro Tejada Galindo on Dec 26, 2008 10:33 AM

Search help in module pool

Hi ,
I am using POV to call search help on a field of screen.
i am using FM 'F4IF_INT_TABLE_VALUE_REQUEST' to display the search help.
My requirment is that when the user clicks on search help that field & the next field on the screen should get populated.
i am able to assign data to the 2nd screen field but not able to display on the screen.
Is it possible to display the 2nd screen field data?
regards
Kapil

hi,
chk this.
FORM F_GET_details .
REFRESH INT_RET.
*--THIS WILL FETCH THE details
SELECT Bill plant price
FROM ztable_numplant
INTO TABLE int_table.
IF SY-SUBRC NE 0.
*--MESSAGE IS 'NO data found'
ELSE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'screen field'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = INT_tab
RETURN_TAB = INT_RET
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE INT_RET INDEX 1 INTO INT_RET.
screen_filed1 = INT_RET-FIELDVAL.
*second screen field obtained
read table int_table with key Bill = screen_filed1.
screen_field2 = int_table-plant
ENDIF.
ENDFORM.
rgds
anver
if hlped mark points
Message was edited by: Anversha s

Need help in module pool program

help me to create dialog program for upload data into DDIC table.FOR EXAMPLE IN CREATING MATERIAL THROUGH MM01 DATA WHIH YOU ARE ENTRING INTO THE FIELD WILL BE STORED IN MARA TABLE.
Message was edited by:
neela renganathan

hi,
Check this thread..
Re: dialog prog
Hope this helps !
Cheers
Alfred

Using logical database to fetch data in Module Pool programming

I am unable to use logical database to fetch data in case of Module pool programming. Has anyone ever faced problems with it...?

use f.m LDB_PROCESS....
refer demo program DEMO_LOGICAL_DATABASE

How to insert data into a Ztable by using module pool programming??

Hi,
I am new to ABAP, Actually I have made a Ztable now I want to insert data by using the module pool programming. In which there are all field in the first screen and there is a save button. So when ever i press SAVE button it shud update the Ztable with new entries.But actually I am not getting How can i update that??can you please send me the code for inserting data.
Thanks in Advance.
Edited by: Swapna Ram on Feb 17, 2008 12:01 AM

Swapna,
Check this thread...
Custom Table updation thru table control
ALso check this..
Dialog programming

How to use module pool program in my custom report?

Hi,
I am developing a custom report in abap. I want to fetch data from a standard module pool program.I want output of this standard module pool program to be used in my standad report.Submit cannot be used with module pool programs. How can i do this?Can u please suggest?

HI friend,
For this you can directly use the table fields i.e. each and every module pool screen fields will be having the table name along with its fields (which you can see by double clicking the field and selecting technical settings button) and since it is a standard module pool program that will get populated directly. So you can get the screen field values directly from the table. I think this will help. Please try and let us know wheather it is solved.
Thanks and regards,
Sri Hari Anand Kumar
Edited by: srihari.kumar on Apr 6, 2011 3:31 PM

Date search help in module pool programming in 4.6C version

Similar Messages

Maybe you are looking for