Days Before Password Expires

Hi,
Our customer would not like to make their users change ME login password.
However, I don't know the valid range of "Days Before Password Expires" in system rule maintenance.
Could anybody tell me the current specification?
I wonder it maybe possible by setting a huge value (ex. 10000 days) and/or 0 day to "Days Before Password Expires".
Regards,
Takahiro

Hello Takahiro,
You will have to change the password at next login if you set this value to 0. However, it seems as though 10000 is acceptable value.
Regards,
Alex.

Similar Messages

Broken phone 12 days before contract expiration

My one year old smashed my iPhone yesterday. I went to the Verizon store and they told me they could not help me but the Verizon store in the mall could over ride. I loaded my toddler back up and dragged her through the mall, was told they can only work with 7 days so I'd have to wait 5 more, then waited an hour while the nice salesman tried to get customer service to help. No help. He then tells me to call myself or I can go back to the first store (which is apparently a different type of store) and their manager can over ride up to 30 days before contract expiration. Considering I had already put my one year old through enough, I opted to try customer service (I can make calls from the Bluetooth in my car). They offered to mail me one next week or said I can push my luck with the manager of the first store. UGH!!! I need my phone for work Monday but after reading about the unwillingness to bend whatsoever, I'm guessing I'll have to buy a walmart phone for tomorrow and wait for the mail.
My question is whether the mailed phone is actually a new phone or one of those infamous refurbished pieces of junk (since I'll be stuck with it for 2 years)

If you're contract is up in 12 days why would you be stuck with a refurbished phone for 2 years? IF they let you upgrade early you should be getting a new phone of your choosing.

Notify users before password expires

Hi,
We have some Vibe external users that need to be notified when their passwords are about to expire, so they can ask us for a new password (their accounts are created in our tree)
I can't seem to figure out any way to allow this so please help...

mcando,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Send reminder 30 days before expire date?

Hi, I hope someone can help me with that.
I am getting in an "expireDate" from a Database.
It can be for ex. "5/21/2007" . This date is a String.
30 days before that expireDate is reached, I want to send a
reminder to the client, like
"your membership is going to expire".
How can I find the date ! 30 days before it expires?
Best regards,
Luciewong

Hi, to All,
unfortunately still I could not get the solution for my
problem.
I have 2 strings coming in from a Database.
todayDate = "9/7/2006";
expireDate = "4/20/2007";
// now, I could find the difference in months with the code
below>
aDate = todayDate;
bDate = expireDate;
TimeUsed.text =
monthsBetween(toDate(aDate),toDate(bDate));//<<will be "7"
function toDate(str){
var d_arr = str.split('/');
return new Date(d_arr[2],d_arr[0],d_arr[1]);
//xxx
function monthsBetween(d1,d2){
var d_date = new Date(d1.valueOf());
var t_date = new Date(d2.valueOf());
var m = -1;
//xxx
while(d_date<=t_date){
//xxx
d_date.setMonth(d_date.getMonth()+1);
m++;
return m;
//xxx
//This will return me the difference between the 2 date
strings in months, great, but can I get the d a y s between??
Thank you for your help.
Luciewong

Email notification to user prior to password expire

Hi All
I have a requirement wherein I need to send a mail to all users to change their password 2 days before it expires. I found that in table URS02 , field PWDCHGDATE gives the last date when password was changed..Can anybody help me to build further logic so that the users will get mail 7 days prior to expiry date of their password, say 30 days is my password validity.
If anybody has worked on this kind of requirement , pls give your inputs on same..
Regards
Babita

Hi there,
I am faced with the same request.
Could you please share your solution?
Regards,
Thomas.

Portal Users Passwords expiring

In 9.02 it seems my portal users passwords seem to expire for no reason. When it happens, I have to go in and manually re-set their passwords. Is this a bug or is there some place to control this.

Set the number of seconds before password expiration that the directory server
sends the user a warning. By default the "Password Expiration Warning"
parameter is set to 0, which disables the expiration warning.
Also if the users need to be able to login after the password expiration set
the "Number of Grace Logins after Password Expiration" parameter to a
number greater than 0.
Change these parameters in the following manner:
1. Start the Oracle Directory Manager from the home of the iAS Infrastructure
2. Login as the OID administrator, i.e. orcladmin
3. Click on the + on the left of Password Policy Management
4. Click on your password policy to change the settings on the right pane
5. Set the Password Expiration Warning in seconds i.e. 259200 for 3 days.
6. Set the Number of Grace Logins after Password Expiration to a greater than 0
value i.e. 1. This will add a last opportunity for the user after his/her
password expired.

Process Password Expiration

I wish to know how can I search for users who have certain password expiration date.
For example, base on the date, I would like to send different emails to user. 1 months before expiration date, user receives a reminder email, 7 days before expiration date, user receives a warning email.
I don't want to scan one by one all the users, get user object, then get the expiration date and do the comparison. I think this is too slow for a big number of users.
Is there any faster way? for example by using attribute condition? How?
Thank you,
Steve

I've done this a couple times using the per-account reconciliation workflow. Its certainly not glamorous, but it does work.
The requirement was to notify AD users one moth and one week before password expiration. Reconciliation was run nightly against AD and I added a per-account workflow. The workflow checked the account expiration attribute and calculated how far it was away from today. If it was 30 or 7 days, I send an email reminder to the user.
The solution did not significantly impact performance. A couple things you'll need to keep in mind. One, add a bunch of conditions up front to keep the speed up. Two, the variable userName is available in the per-account workflow when the recon condition is MATCHED. Finally, you're bound to your reconciliation schedule, so you may have to do some conditionals to make sure you aren't reminding people every night or every week.

Cisco ISE CLI and GUI password expire

I had Cisco ISE version 1.1 i face a problem with the CLI and GUI password, as it expire and i can't login, i do the password reset using the ISE DVD,
i navigate to the ISE CLI, and do the following commands:
conf t
     password-policy
          no password-expiration-enable
and reset the GUI admin password, using the command:
     # application reset-passwd ise admin
from the ISE GUI i had remove the option for diable admin account after 45 days.
but after 60 days the password expire again.
so kindly advise what to check for this expire issue.

Hi Mostafa,
Yes, the last reply was more towards GUI password-mgmt because in maority of cases it happens with UI admin account. I need to know if you've restarted the ISE after disabling the expiration from the CLI because what I read few weeks ago in an internal defect that password policy configurations are not preserved on cli after restart so just to check could you please check the current settings on CLI w/ the help of show run | in password-policy.
~BR
Jatin Katyal
**Do rate helpful posts**

Number of days before user needs to change password

If I enter a value for "Number of days before user needs to change password" will that effect both user and supervisor accounts or just user accounts? I have a supervisor account that we use for a lot of processes and do not want it to expire. However, our corporate security policy is to have user passwords expire at least every 90 days. Has anyone faced this before? Thanks, Mburkett

mburkett, Version 7.X has the external authentication option. The integration with active directory is very easy and can be configured in a few minutes. However, if your Essbase user names are different than MSAD user names, you would have to replace all Essbase users with their domain ID in order to use external authentication. If the user names are the same, it is only a matter of changing the flag to use the external AD password, rather then the Essbase password. If you are not using Hyperion HUB, you should install it prior to implementing External Authentication. I don't know the details of your custom job scheduler, but if it is based on ESSCMD, I dont see why it would not continue to work with an upgraded version. Good Luck, Chris

Diferent password expiration days for different users in the same system.

Hi sdn gurus,
We need to configure different password expiration days for different groups of users in the same system.
We know how to configure the system to define a password expiration time for the complete system (parameter login/password_expiration_time), but we must configure some expiration time to a group of users and another expiration time to another one in the SAME system.
Somebody know a way to do this?
Thanks in advance for your help!!!

Hi Sunny,
Thanks for your reply!!!
We know the parameter is for the complete system ... but we are trying to find out if exist another way to define diferent passwrod expiration days, to diferent group of users (may be with an additional system parameters or UME configuration).
Thanks to all for your help.

"user password expiration" for every 30 days for the NW2004S systems

Dear all,
We are using NW2004s with BI and DI,EP. We set the parameter "user password expiration" for every 30 days for the NW2004S systems(dual stack).
In the system users SAPJSF,NWDI_CMSADM,J2EE_ADMIN,NWDI_ADM, ADMINITRATOR is also getting change once in every month(30 days),So that we need to change the password and it should get update in the visual admin and config tools. Some time this arising problem. Is there any way to avoid the password expire for this particular user in the system .
Note :Password expire parameter should keep compulsory in the system
So Please guide us to resolve those problem.
Thanks in advance
Regards
Lakshminarayanan M

Hi!
I don't suggest you to change J2EE_ADMIN password. instead you should logon with your user.
Anyway.... please find below a small program to control passwords validity. for some users is very usefull.
REPORT ZS_ALTERA_DATA_PASS                     .
tables:usr02.
select-options : s_users for usr02-bname.
parameter:       p_data like usr02-bcda1 default sy-datum.
update usr02 set bcda1 = p_data
             where bname in s_users.
if sy-subrc eq 0.
MESSAGE 'Password validity changed' type 'S'.
else.
MESSAGE 'ERROR changing password validity' type 'E'.
endif.
cheers

How to set Password expiration at 45 days for all users (new or existing)

Hey all please suggest suitable way to set password expiration at 45 days of all application users.
i am using APPS R -12.1.3 ...

reply with possible ways.
URGENT...

Number of days before user must change password.

Hi,
I understand how does this Essbase server setting work:
Essbase Server Properties - Security Tab
"Number of days before user must change password"
But my question is:
Does anyone know how "to mark" certain group of Users (mainly system admin accounts) - that this setting will not force periodical passoword change for "marked" users ?
Any ideas ?
Br, ripasso

There are a couple of things you could do to circumnavigate this all or nothing option.
You could write a maxl statement that would update the user profile to force the user to change their password e.g.
alter user Fiona set password_reset_days immediate;
I would write a program using the API that lists all users in the group and then dynamically create the maxl script that uses the statement above.
If you can not use the API then I guess you could do a maxl only solution (using display user command) and do some text file manipulation in perl (or another scripting language).
There are probably more solutions/ideas out there.

My iPhone 3gs stopped working 2 days before warranty period,now even warranty period is expired I need replacement

My iPhone 3gs stopped working 2 days before warranty period,But i was unable to contact apple immediately as no apple store is available near my place,Now i need to replace my iphone..How can i get it?

Pay for an out of Warranty replacement.
It was your decision to not contact Apple before the warranty period expired.

Downloaded trial products, installed full CS4 later but still saying 'x' days left before trial expires'. Is this normal?

I downloaded the 30-day trial versions of Photoshop, DW, Flash, FW, etc onto a couple of new Mac Pro's for staff to work with while i was waiting for our full CS4 licenses to arrive. I then installed the full CS4's from the DVD's onto the machines no problem, serials accepted fine - all good. But whenever we open up an application, we still get up the screen at the beginning saying we're using the trial version and that we have (now) 2 days left before it expires. I've tried entering the full license serial number into the option below this notice but it won't accept it. I'm now very concerned that in 2 days time the staff won't have CS4 to work with even though it's been installed.
Will it simply recognise the full CS4 version once the trial runs out? Should i have uninstalled the trial first or entered my new full license serial into the trial without installing from the DVD's? Have i done something wrong?
Any views/help/advice/knowledge is much appreciated.

Did you uninstall the trials?
I would uninstall the software then run the CS4cleanscript.
then reinstall.

Days Before Password Expires

Similar Messages

Maybe you are looking for