(DB) ERROR: db_connect rc = 256 DbSlConnect to 'sid' as 'sapsid' failed

am installing ECC 6.0 SR1 EHP4 Ready in AIX 6.1 db2 9.1.7.
Got following error in step 27 (IMPORT ABAP)
ARNING 2011-03-03 16:42:02.173
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/WD1/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/WD1/SYS/exe/run/R3load: START OF LOG: 20110303164202
/usr/sap/WD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/WD1/SYS/exe/run/R3load: version R7.01/V1.4 UNICODE
Compiled Feb 24 2009 21:54:08
/usr/sap/WD1/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'WD1' as 'sapwd1' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'WD1' as 'sapwd1' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/WD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/WD1/SYS/exe/run/R3load: END OF LOG: 20110303164202
WARNING[E] 2011-03-03 16:42:02.176
CJSlibModule::writeError_impl()
I have posted this by mistake in another forum..moderator can delete that from other one.
Thanks
Amit Barnawal

When I run R3load -testconnect I got following msg:
./R3load -testconnect
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
./R3load: START OF LOG: 20110303191737
./R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
./R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
./R3load -testconnect
(DB) ERROR: DbSlControl(DBSL_CMD_IMP_FUNS_SET) rc = 20
(DB) ERROR: DbSlErrorMsg rc = 20
./R3load: job finished with 1 error(s)
./R3load: END OF LOG: 20110303191737
Thanks
Amit Barnawal

Similar Messages

(DB) ERROR: db_connect rc = 256 in Import ABAP

I am installing ECC 6.0 SR1 EHP4 Ready in AIX 6.1 db2 9.1.7.
Got following error in step 27 (IMPORT ABAP)
ARNING    2011-03-03 16:42:02.173
           CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/WD1/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/WD1/SYS/exe/run/R3load: START OF LOG: 20110303164202
/usr/sap/WD1/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
/usr/sap/WD1/SYS/exe/run/R3load: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 21:54:08
/usr/sap/WD1/SYS/exe/run/R3load -testconnect
DbSl Trace: DbSlConnect to 'WD1' as 'sapwd1' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'WD1' as 'sapwd1' failed
(DB) ERROR: DbSlErrorMsg rc = 29
/usr/sap/WD1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/WD1/SYS/exe/run/R3load: END OF LOG: 20110303164202
WARNING[E] 2011-03-03 16:42:02.176
           CJSlibModule::writeError_impl()
Thanks
Amit Barnawal

Hello,
dbms_type
Must be always set to "mss" for SQL Server.
MSSQL_SERVER
Name of the SQL Server instance. E.g. "SQLSERVER" (default
instance on server "SQLSERVER") or "SAPSQL\PRD" (named instance
"PRD" on server "SAPSQL")
MSSQL_DBNAME
Name of the database, usually <SID> in uppercase letters.
MSSQL_SCHEMA
Name of the database schema, usually "dbo" in lowercase letters.
With an MCOD system, the database schema is <sid> in lowercase
letters.
regards,
John Feely

(DB) ERROR: db_connect rc = 256 DbSl Trace: CONNECT failed with sql error '-2'

Hi Experts,
I have an error when I copy Homogeneous in SOLMAN, I do the import of the database and this error occurs:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: START OF LOG: 20140407112019
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: sccsid @(#) $Id: //bas/720_REL/src/R3ld/R3load/R3ldmain.c#21 $ SAP
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: version R7.20/V1.4 [UNICODE]
Compiled Mar 18 2014 22:40:46
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load -testconnect
(DB) ERROR: db_connect rc = 256
DbSl Trace: CONNECT failed with sql error '-2'
(DB) ERROR: DbSlErrorMsg rc = 99
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: job finished with 1 error(s)
/usr/sap/SOP/SYS/exe/uc/linuxx86_64/R3load: END OF LOG: 20140407112019
I need help to correct this error.

Hi Michal,
Login with ora<SID> and check whether you are able to connect to sqlplus ( do steps as below )
1. sqlplus "/as sysdba"
2. select status from v$instance.
Let us know the ouput of both the command
Thanks
Anil

Error While Doing FCC on Sender Side

Hi All,
Iam reffering this Blog and doing File to File (FCC at Sender Side)
Content Conversion ( The Key Field Problem )
I have the Same Structure for both Source & Target. this is my structure
http://img386.imageshack.us/my.php?image=sourcestructym4.jpg
& i used the Following FCC Parameters at Sender Side
http://img123.imageshack.us/my.php?image=fccparawy7.jpg
Header.fieldSeparator ,
Header.fieldNames --- keyfield,Name,Designation,City
Header.keyFieldValue --- 01
Body.fieldSeparator ,
Body.fieldNames -
keyfield,Salary,Contact,MailID
Body.keyFieldValue -- 02
Trailer.fieldSeparator ,
Trailer.fieldNames ---keyfield,Address,Pin
Trailer.keyFieldValue -- 03
ignoreRecordsetName -- true
Txt File--Input
01,Vamsi,SSE,Chennai
02,1000,9962123146,vamsi.krishna
03,Chennai,600096
I placed the txt File in AL11 of XI Server and file not picked up and i have got the Error in Sender CC monitor in RWB
Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'Header.keyFieldValue': no value found Mandatory parameter 'Header.fieldNames': no value found
Regards

Hi,
I think all your configuariotn looks right.
Regarding your .txt file:
Check that there is no blank lines before your first record.
Also, that your records begin in the first column,
and also that there is 'nl' between your records.
Try to add 'field.endSeparator ' in every record.
According to help. sap:
If you only specify a value for NameA.fieldSeparator, the system expects a string containing the
names of the file columns in the same format as the file rows. This means that the same separator and
any additional strings you specify for NameA.endSeparator and/or NameA.beginSeparator are expected.
Carlos
Edited by: Carlos Gonzalez on Nov 27, 2008 12:10 PM

Getting error while starting SAP service "SAP SID _01" in ECC 6.0

Hi All,
While starting the SAP<SID>_01 service I am getting the following error :
"The SAP<SID>_01 service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion."
We have ECC6.0, OS Windows 2003 and databse oracle 10.2.
Could you please let me know why this error is coming and solution?
Thanks in advance.
Thanks,
Harish

Hi Harish,
Can you check and copy log from Control Panel-> Administrative Tools->Event Viewer -> Application Log and System log.
Regards,
Payal Patel

The Group Policy client-side extension Scripts failed ...

This is an error I've been seeing forever and it was always the impression that upgrading would resolve it, but it never has even in 10.3. 100% of our users get these errors in the Event Viewer:
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1085
Date: 10/21/2010
Time: 8:04:52 AM
User: NT AUTHORITY\SYSTEM
Computer: XXXXXX
Description:
The Group Policy client-side extension Scripts failed to execute. Please look for any errors reported earlier by that extension.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
We also seem to have flakey policy issues where once in awhile a user will not be able to logon to Windows with Workstation Only while getting the " not allowed to logon interactively" message, other times the users report not being able to access the Windows Date and Time Properties and further sometimes they are unable to make system changes.
We have troubleshooted this and the only resolutions we've found are to run zac cc, zac ref, zac pl and sometimes it seems like deleting c:\windows\system32\grouppolicy will help.
In regards to the Event Viewer entry I posted, on any given machine I can issue the command gpupdate and it will put another entry into the Event Viewer (sometimes multiple ones). I've learned through research that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the errors go away, but once the policy is refreshed they come right back.
This is the version ZenWorks gives the users:
[General]
gPCFunctionalityVersion=2
gPCFunctionalityVersion=2
gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
Version=6488106
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
This is the version I cleaned up:
[General]
gPCFunctionalityVersion=2
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
I'm not sure how to get Zenworks to use the cleaned up version nor and I too sure what those extra extensions are and how they got in there. I may need to contact Novell in regards to this, but since I'm already working on an SR with them I figured I'd go ahead and post here first.
Any help or advice would be greatly appreciated.

Here are the groups I'm using. NOTE: These have been in affect throughout the issues experienced. Users will work perfectly fine then suddenly the problem will start happening without any policy change on our side.
-Member of-
Network Configuration Operators+
Remote Desktop Users+
Users+
-Assigned Rights under a group I called "Other Rights"-
Access this computer from network
Change the system time
Log on locally
Shut down the system
The only condition I have is that these issues happen when logging in Workstation Only and I'm not able to recreate the problem on demand with tests.
Originally Posted by craig_wilson
The "Interactive Logon" is a Windows Security Permission.
It is generally assigned to certain local groups such as "User".
Which groups are assigned this right can be changed manually and
controlled by local security policies.
When user's get this error, it generally means their account is not in a
local group that has been assigned that right.
If using "DLU", make sure the user accounts are a member of "Users".
And If anyone was messing with security policies, make sure they did not
take away "Interactive Logons" from anyone.
On 10/29/2010 7:06 AM, jcsmith1 wrote:
>
> Thanks for replying craig.
>
> My policy woes have only grown since my first post. We are currently
> testing the removal of administrative rights and now we're having
> teleworkers (who login Workstation Only) getting the message "policy
> does not allow interactive login". What -seems- to fix it is a zac cc,
> zac ref and zac pl, however we just started getting call backs from
> users.
>
> I seem to have no further leads and Novell's ZenWorks tech supports
> seems to be going through some kind of painful-to-the-customer
> transition as one of my thoughts on resolving the issue is to go to 10.3
> or 10.3.1, but my Satellites appear to be upgrading but in reality do
> not upgrade (but the primary servers upgraded) (See SR 10655976331).
>
> Does anyone knows how to troubleshoot policy issues when the users
> aren't loggin into ZCM?
>
> craig_wilson;2036646 Wrote:
>> See: 'Group Policy Error: The Group Policy client-side extension Script
>> failed to execute.'
>> (Group Policy Error: The Group Policy client-side extension Script failed to execute.)
>>
>> This would never be fixed in any patch, since it would be the job of
>> GPEDIT to properly maintain the GPT.INI.
>>
>> Most of the Time these errors are cosmetic and caused by stray script
>> extensions.
>>
>> You may want to create an Enhancement Request to allow the creation of
>> "Filters" so certain errors are discarded and not sent to the DB/ZCC.
>> This way an Admin could choose to filter out various error messages
>> that
>> they deem are not actually of concern.
>>
>> On 10/21/2010 9:36 AM, jcsmith1 wrote:
>>>
>>> This is an error I've been seeing forever and it was always the
>>> impression that upgrading would resolve it, but it never has even in
>>> 10.3. 100% of our users get these errors in the Event Viewer:
>>>
>>> -Event Type: Error
>>> Event Source: Userenv
>>> Event Category: None
>>> Event ID: 1085
>>> Date: 10/21/2010
>>> Time: 8:04:52 AM
>>> User: NT AUTHORITY\SYSTEM
>>> Computer: XXXXXX
>>> Description:
>>> The Group Policy client-side extension Scripts failed to execute.
>>> Please look for any errors reported earlier by that extension.
>>>
>>> For more information, see Help and Support Center at
>>> http://go.microsoft.com/fwlink/events.asp.
>>> -
>>> We also seem to have flakey policy issues where once in awhile a
>> user
>>> will not be able to logon to Windows with Workstation Only while
>> getting
>>> the " not allowed to logon interactively" message, other times the
>> users
>>> report not being able to access the Windows Date and Time Properties
>> and
>>> further sometimes they are unable to make system changes.
>>>
>>> We have troubleshooted this and the only resolutions we've found are
>> to
>>> run zac cc, zac ref, zac pl and sometimes it seems like deleting
>>> c:\windows\system32\grouppolicy will help.
>>>
>>> In regards to the Event Viewer entry I posted, on any given machine
>> I
>>> can issue the command gpupdate and it will put another entry into
>> the
>>> Event Viewer (sometimes multiple ones). I've learned through
>> research
>>> that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the
>> errors
>>> go away, but once the policy is refreshed they come right back.
>>>
>>> This is the version ZenWorks gives the users:
>>>> [General]
>>>> gPCFunctionalityVersion=2
>>>> gPCFunctionalityVersion=2
>>>>
>> gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
>>>> Version=6488106
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>>>>
>>>
>>> This is the version I cleaned up:
>>>> [General]
>>>> gPCFunctionalityVersion=2
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>>>>
>>>
>>> I'm not sure how to get Zenworks to use the cleaned up version nor
>> and
>>> I too sure what those extra extensions are and how they got in there.
>> I
>>> may need to contact Novell in regards to this, but since I'm already
>>> working on an SR with them I figured I'd go ahead and post here
>> first.
>>>
>>> Any help or advice would be greatly appreciated.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

All CX traffic dropped on data plane with error message 'Unable to create policy params (policy-params-failed)

Problems with CX dropping all traffic - error message: Unable to create policy params (policy-params-failed) seen when issuing cli cmd show opdata framedrop on CX.
Data hits ASA Service Policy and is redirected to CX, but no traffic is passed (user experience is timeout in browser).
Problem started after SW upgrade - present running versions:
ASA version: 9.1.5(21)
CX version: 9.3.3.1 (13)
Have tried to disable all policies and create a 'permit any any' policy, which at present is the only activve policy - still same problem.
Any suggestions?

If i am using 11G andrtp is 11g but on rtp side if they configure SSL, is it mandatory to do it from our side also?No it not mandatory to enable SSL at your end however you have to configure identity and trsut at your end.
Any update on my regular question(The main forum question)?You mentioned that you are posting message from 10g to 11g and as per log you are sending it to URL - https://dev-nog.server:443/b2b/transportServlet
So few things which I see as a problem are-
1. You should use URL https://hostname:soa_server_ssl_port/b2b/httpReceiver instead of https://dev-nog.server:443/b2b/transportServlet
2. SOA server SSL port should be enabled (SSL should be enabled on SOA server)
3. You should configure wallet at 10g side to contain trust cert of 11g server
Regards,
Anuj

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

HT1926 reinstalled itunes after unistalling it due to error message during update. after it was completly unistalled still has the same error message: service "apple mobile device" (apple mobile device) failed to start, verify you have sufficient priviled

I was prompted to update itunes this evening. I did and in the process, it came up with the following error message: Service "apple mobile device" (apple mobile device) failed to start. Verify you have sufficient priviledges to start system services. I unistalled itunes completly and reinstalled but am still getting the same error message. If I click "ignore" the program will finish downloading but will not launch due to "not being installed correctly". Please help, I use this program alot with my first grade classroom and they're expecting their listening center in the morning.

Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!!

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

HT1349 Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
iTunes has been running great on this PC for years. What's up?
Ron

See Troubleshooting issues with iTunes for Windows updates.
tt2

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.

Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.

I am getting the following error messages Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7

When I tried to install latest updates to Lightroom I am getting the following error messaage:
Extension Manager 6.0.8 Update
Installation failed. Error Code: U44M1P7
Ca you explain what I need to do to resolve this?

Jjmarmour please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve the U44M1P7 error.

Ipod touch error message-"attempting to copy to the disk "dad" failed....

I have an 8 gb ipod touch. My ipod is called "dad". I have dragged songs from the library to my music and will receive the error message "attemtping to copy to the device 'dad' failed. the device is not connected. I can see the device on itunes...not sure why it is seen as not connected. Note one thing. If I unplug my ipod or turn it off and on it will work for 5 or 10 songs properly...and then stop working and give me the error message above. I have tried restoring on iunes and that did not work. Does anyone else have any advice

i am also having this problem. i have only tried with apps and music. it starts to sync, does a couple, then just disappears from itunes. the ipod touch still says sync in progress though.
i have tried restoring multiple times, i have tried doing it in dfu mode, tried different ports. its a 1g 16gb ipod touch.
i see im not the only one having this problem. so what is the solution apple?
i love how its our fault. i have always taken good care of my ipod. if i take it to an apple store they would not repair whatever is wrong because my warranty ended in november.
thanks apple...

(DB) ERROR: db_connect rc = 256 DbSlConnect to 'sid' as 'sapsid' failed

Similar Messages

Maybe you are looking for