DB13 error -- Function DB6_PLAN_DELETE_BATCH failed with return code = Job

hello All,
when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
An error occurred when processing system
Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
How can I fix this error and delete or change my DBA jobs?
My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
Thanks
Hernando

Hello Hernando,
Let's see what this SAP Note says,
Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
Edit: However, 'valid release' makes confusion
Regards
Subbarao
Edited by: subbarao chinta on Oct 8, 2009 9:00 PM

Similar Messages

Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error

Hi team,
I have issue with "SAP_COLLECTOR_FOR_PERFMONITOR" Job .it has been Finished but in Job Log I get error as below:
Job started
Step 001 started (program RSCOLL00, variant , user ID DDIC)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV on server sapqas01
Clean_Plan:Cleaning up jobs of system QAS
Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error
Clean_Plan:terminated with error
REASON=Job error
Database system not supported
Reorganization of the database started
Reorganization of the database ended
Job finished
I have alredy reschedule this Job in 000 with DDIC User.
Please help me ,
Thanks
Vijay

Hello Vijay,
The "Database system not supported" error you see, suggests that your TCOLL table is not setup correctly. You probably have a report scheduled in your TCOLL which is for a different DB then the one you run.
If the collector canels all the time, then this is probably a report which is scheduled to run every hour in your TCOLL. If it only cancels sometimes, then it should be easier to identify which report is causing it in your TCOLL.
The bottom line is to ensure your TCOLL is setup correctly and that you are not running DB reports there that are for a different DB than the one you use. The SAP note you follow to setup your TCOLL table depends on your SAP system version:
12103 - Contents of the TCOLL table
970449 - Contents of TCOLL table in SAP_BASIS 640
966309 - Contents of table TCOLL in SAP_BASIS 700
966631 - Contents of TCOLL table in SAP_BASIS 710
Regards,
Brendan

Function DB6_DIAG_VIEW_SOURCE failed with return code = Program source not

Hi,
This is the prompt that I get when I try to view the Call point in ABAP for a particular SQL ID in Transaction st04 -> SQL Statement Analysis -> Shared Cache.
What does this Error signify ??
Thanks & regards to all readers and posters.

Hi,
check SAP note 1309309 "Application Info" is missing. You probabyl need a new DBSL patch.
btw. istn't it funny that on an ORACLE database a DB6_DIAG_VIEW_SOURCE function module is used... ?
Kind regards,
Hermann

Error: OCIEnvCreate failed with return code -1

I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanks

792208 wrote:
I am trying to run a 3rd party software that access Oracle. I have set up the ODBC connections and tested the connections. They tested successfully. But when I try and connect to Oracle using this tool I get the following error: OCIEnvCreate failed with return code -1. Any help would be greatly appreciated. Thanksif the connection request actually gets to the listener, then it will be logged.
If no record exists within listener.log file, then the root cause & solution are external to Oracle.

ODI Error: ODI-1217: Session jobname (2197102) fails with return code 700

Hi All,
We are getting the below error when running an interface in our ODI 11.1.6 environment.
ODI-1217: Session <interfacename> (2197102) fails with return code 7000.
Caused By: com.sunopsis.tools.core.exception.SnpsSimpleMessageException: ODI-17517: Error during task interpretation.
Task: 147
java.lang.Exception: BeanShell script error: Parse error at line 26, column 38. Encountered: >= BSF info: Insert flow into I$ table at line: 0 column: columnNo
at com.sunopsis.dwg.codeinterpretor.SnpCodeInterpretor.transform(SnpCodeInterpretor.java:485)
at com.sunopsis.dwg.dbobj.SnpSessStep.createTaskLogs(SnpSessStep.java:711)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:461)
The interface is a simple pass-through one which loads data from one table to another. We have checked in the interface for any discrepancies but could not find any issue. We ran the same interface in another environment and it ran fine there. Restarting the agent also didnt help. We could not find any lead for any solutions. Any help on the issue would be highly appreciated.
P.S: Interface name has been kept generic to <jobname>
Thanks,
Shrinivas

Please give the code generated in that step ( Insert flow into I$ table.)

OCIEnvNlsCreate failed with return code -1

Hi, we're getting this error when running SQL Server 2005 Reporting Services to connect to an Oracle 9i database. The report works fine locally but breaks on the web. Another user has posted about this same exact issue to Microsoft's SSRS forum, but with no answer: http://tinyurl.com/ynqv7o
Your help is much appreciated. Thank you.

Check Re: OCIEnvNlsCreate failed with return code -1

ODI-1217 session fails with return code 904

Hi all,
I am anil, I new to ODI, can any one help me in it.
I have just created a one on one mapping, and then executed it, and I am getting "ODI-1217 session fails with return code 904" this error, what to do, why it happens, can any have any idea.
Thanks,
Anil

Hi,
it just returns this error.Could you copy here all error ?
Regards

F *** ERROR = Node 'bootstrap' failed with exit code 503.

Hi,
     i installed the sap nw 7.2 trial version succesfully and due to sapgui problem i downloaded a new sapgui 720 patches from the service place and installed and when installation ,i installed jre for the sapgui. after that when i start the sap server the jstart.exe is not started it is stopped. and showing the errror message
F *** ERROR => Node 'bootstrap' failed with exit code 503.
dev_jstart
trc file: "dev_jstart.3508", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno      00
sid        CE1
systemid   560 (PC with Windows NT)
relno      7200
patchlevel 0
patchno    22
intno      20020600
make       multithreaded, Unicode, optimized
profile    D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
pid        3508
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      All, egi
Sat May 22 10:55:11 2010
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
arg[ 1] : pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F
F Sat May 22 10:55:11 2010
F ********************************************************************************
F Java environment properties (D:\usr\sap\CE1\J00\work\jstart.jvm)
F    root directory    : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F    vendor            : SAP AG
F    version           : 1.6.0_07
F    cpu               : x86
F    java vm type      : server
F    java vm version   : 6.1.007
F    jvm library name : jvm.dll
F    library path      : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F    executable path   : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F ********************************************************************************
F    SAP extensions    : available
F ********************************************************************************
I [Thr 3512] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      All, egi
F [Thr 3512] *** LOG => connected to Enqueue Server.
F [Thr 3512] *** LOG => connected to Message Server.
F [Thr 3512] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F    section name     : deployment
F    config file      : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F    node name        : Deploy_offline
F    home directory   : D:\usr\sap\CE1\J00\j2ee\cluster
F    shutdown timeout : 136000 ms
F    exit timeout     : 7000 ms
F    debuggable       : false
F    debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 1.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F    arg[ 1] = -nodeId=0
F    arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F    arg[ 3] = -hostvm
F    arg[ 4] = -nodeName=deployment
F    arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F    arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F    arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_deployment
F    arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_deployment.out
F    env   : JStart/ReserveSize=0x60000000
F    env   : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_deployment.out
F stderr : D:\usr\sap\CE1\J00\work\std_deployment.out
F console : no
F debugger: no
F nice    : yes
F ********************************************************************************
F Process Deploy_offline started with pid 3648
F ********************************************************************************
F [Thr 3512] *** LOG => Process deployment started (pid 3648).
F
F [Thr 3512] Sat May 22 10:55:14 2010
F [Thr 3512] *** LOG => Process deployment stopping (pid 3648).
F
F [Thr 3656] Sat May 22 10:55:14 2010
F [Thr 3656] *** LOG => Signal 13 SIGCHLD.
F [Thr 3512] *** LOG => Process deployment stopped (pid 3648).
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 1 completed.
F [Thr 3512] *** LOG => Starting run level 2.
F
F Sat May 22 10:55:15 2010
F ********************************************************************************
F Java process [bootstrap] properties:
F    section name     : bootstrap
F    config file      : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F    node name        : Instance_bootstrap
F    home directory   : D:\usr\sap\CE1\J00\j2ee\cluster
F    shutdown timeout : 136000 ms
F    exit timeout     : 7000 ms
F    debuggable       : false
F    debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 2.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F    arg[ 1] = -nodeId=0
F    arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F    arg[ 3] = -hostvm
F    arg[ 4] = -nodeName=bootstrap
F    arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F    arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F    arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_bootstrap
F    arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_bootstrap.out
F    env   : JStart/ReserveSize=0x60000000
F    env   : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F stderr : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F console : no
F debugger: no
F nice    : yes
F ********************************************************************************
F Process Instance_bootstrap started with pid 3736
F ********************************************************************************
F [Thr 3512] *** LOG => Process bootstrap started (pid 3736).
F
F [Thr 3512] Sat May 22 10:55:20 2010
F [Thr 3512] *** LOG => Process bootstrap stopping (pid 3736).
F
F [Thr 3744] Sat May 22 10:55:21 2010
F [Thr 3744] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:21 2010
F [Thr 3512] *** LOG => Process bootstrap stopped (pid 3736).
F [Thr 3512] *** WARNING => Node bootstrap failed: result 1, exit code 503. [sfxxnode.hpp 1011]
F ********************************************************************************
F Native process [snapshot] properties:
F    section name     : snapshot
F    config file      : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F    node name        : snapshot
F    home directory   : D:\usr\sap\CE1\J00\work
F    shutdown timeout : 122000 ms
F    sf support       : false
F ********************************************************************************
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\sapcontrol.EXE
F    arg[ 1] = -prot
F    arg[ 2] = PIPE
F    arg[ 3] = -nr
F    arg[ 4] = 00
F    arg[ 5] = -function
F    arg[ 6] = CreateSnapshot
F    arg[ 7] = Servercrash
F    arg[ 8] = postmortem?node=bootstrap&exitcode=503
F    arg[ 9] = 1
F    arg[10] = 10000
F    arg[11] = ""
F    arg[12] = ""
F    arg[13] = DEFAULT
F    env   : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_snapshot.out
F stderr : D:\usr\sap\CE1\J00\work\std_snapshot.out
F console : no
F debugger: no
F nice    : yes
F ********************************************************************************
F Process snapshot started with pid 3884
F ********************************************************************************
F [Thr 3512] *** LOG => Process snapshot started (pid 3884).
F [Thr 3512] *** LOG => Process snapshot running (pid 3884).
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) connected.
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) disconnected.
F
F [Thr 3892] Sat May 22 10:55:29 2010
F [Thr 3892] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:29 2010
F [Thr 3512] *** LOG => Process snapshot stopped (pid 3884).
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 2 completed.
F [Thr 3512] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 3512] MPI: dynamic quotas disabled.
I [Thr 3512] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 3512] *** LOG => exiting (exitcode 22002, retcode 1).

<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[C:\Documents and Settings\Administrator\.sdtgui\log\SDTServer.log]/>
<!PATTERN[SDTServer.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%6s]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 23, 2015 10:45:07 AM [Info ]: *************************************************
May 23, 2015 10:45:07 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:45:07 AM [Info ]: StorageService switched off.
May 23, 2015 10:45:07 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:45:07 AM [Info ]: Key Store management switched off.
May 23, 2015 10:45:08 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:45:08 AM [Info ]: WebstartService switched off.
May 23, 2015 10:45:08 AM [Info ]: RoleService switched off.
May 23, 2015 10:45:08 AM [Info ]: AlertService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting NotesService ...
May 23, 2015 10:45:08 AM [Info ]: ProcessService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting MIDService ...
May 23, 2015 10:45:08 AM [Info ]: Starting FileService ...
May 23, 2015 10:45:08 AM [Info ]: LogService switched off.
May 23, 2015 10:45:08 AM [Info ]: MailService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting services ...
May 23, 2015 10:45:08 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:45:08 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:45:08 AM [Info ]: Services started.
May 23, 2015 10:45:08 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:45:08 AM [Info ]: HTTP server started.
May 23, 2015 10:45:08 AM [Info ]: SL Controller started.
May 23, 2015 10:45:08 AM [Info ]: Starting GUI ...
May 23, 2015 10:45:11 AM [Info ]: GUI started.
May 23, 2015 10:46:53 AM [Info ]: *************************************************
May 23, 2015 10:46:53 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:46:53 AM [Info ]: StorageService switched off.
May 23, 2015 10:46:53 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:46:53 AM [Info ]: Key Store management switched off.
May 23, 2015 10:46:53 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:46:53 AM [Info ]: WebstartService switched off.
May 23, 2015 10:46:53 AM [Info ]: RoleService switched off.
May 23, 2015 10:46:53 AM [Info ]: AlertService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting NotesService ...
May 23, 2015 10:46:53 AM [Info ]: ProcessService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting MIDService ...
May 23, 2015 10:46:53 AM [Info ]: Starting FileService ...
May 23, 2015 10:46:53 AM [Info ]: LogService switched off.
May 23, 2015 10:46:53 AM [Info ]: MailService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting services ...
May 23, 2015 10:46:53 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:46:53 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:46:53 AM [Info ]: Services started.
May 23, 2015 10:46:53 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:46:53 AM [Info ]: HTTP server started.
May 23, 2015 10:46:53 AM [Info ]: SL Controller started.
May 23, 2015 10:46:53 AM [Info ]: Starting GUI ...
May 23, 2015 10:46:56 AM [Info ]: GUI started.
May 23, 2015 10:47:19 AM [Info ]: *************************************************
May 23, 2015 10:47:19 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:47:19 AM [Info ]: StorageService switched off.
May 23, 2015 10:47:19 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:47:19 AM [Info ]: Key Store management switched off.
May 23, 2015 10:47:20 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:47:20 AM [Info ]: WebstartService switched off.
May 23, 2015 10:47:20 AM [Info ]: RoleService switched off.
May 23, 2015 10:47:20 AM [Info ]: AlertService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting NotesService ...
May 23, 2015 10:47:20 AM [Info ]: ProcessService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting MIDService ...
May 23, 2015 10:47:20 AM [Info ]: Starting FileService ...
May 23, 2015 10:47:20 AM [Info ]: LogService switched off.
May 23, 2015 10:47:20 AM [Info ]: MailService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting services ...
May 23, 2015 10:47:20 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:47:20 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:47:20 AM [Info ]: Services started.
May 23, 2015 10:47:20 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:47:20 AM [Info ]: HTTP server started.
May 23, 2015 10:47:20 AM [Info ]: SL Controller started.
May 23, 2015 10:47:20 AM [Info ]: Starting GUI ...
May 23, 2015 10:47:23 AM [Info ]: GUI started.
May 23, 2015 11:27:57 AM [Info ]: Stopping services ...
May 23, 2015 11:27:57 AM [Info ]: Stopping service "SAPinstService" ...
May 23, 2015 11:27:57 AM [Info ]: Service "SAPinstService" stopped.
May 23, 2015 11:27:57 AM [Info ]: Services stopped.
May 23, 2015 11:27:57 AM [Info ]: Server shutdown by SAPinstService

Backng up failed with return code 255 ...Help!!!

Hi,
I am in a process of backing up Oracle application server 10g through "Configure Backup/Recovery Settings" feature of the app server, when I provide the directories for:
1. Log File Location
2. Configuration Files Backup Location
3. Metadata Repository Database Backup Location
4. Metadata Repository Database SID
and click on OK it provides me the following error:
"The command <ORACLE_HOME>/perl/5.6.1/bin/MSWin32-x86/perl.exe <ORACLE_HOME>\backup_restore/bkp_restore.pl -m configure -h <ORACLE_HOME> -f > <ORACLE_HOME>\backup_restore\logs/2008-12-06_13-36-02_output.log failed with return code 255"
And the log file says -"Unable to get dbid from the database."
Please Help..!!!
Thanks

This turns out to be a non-issue. I re-installed JDK 1.6,
thinking this might have been the problem, but as it turns out,
this Windows machine was a VM, and there haven't been any issues
with other VM's, only this one, leading me to conclude the problem
was the VM. We've since migrated off this machine and recycled
it.

DB2SET DB2WORKLOAD=SAP Fails with Return Code 238

Not sure which forum to post this, hopefully this is the right one. I am in the middle of setting up a sandbox for CRM and during the install, updating the database registry, the install fails with the following error;
db2set DB2WORKLOAD=SAP finished with return code 238.
OS AIX PPC64 I think the version is 5.3
DB2 9 FP5
I can't seem to find anything by google, but I am sure this is just a simple fix.

Hi All,
The SAP installation stopped with following error ...
DB2SET DB2WORKLOAD=SAP Fails with Return Code 227
Please help me in solving this issue .....
Regards,
Kumar Kadali

OCIEnvCreate failed with return code -1

Ciao a tutti, ho il seguente problema (purtroppo...):
applicazione asp.net;
utilizzo odp.net 9.2 per accedere a un db oracle 9i;
sul server sono state installate in sequenza: oracle client 9, odp.net 10.2, disinstallate odp.net 10.2 e installate odp.net 9.2;
Alla disinstallazione di odp.net 10.2 è comunque rimasta sotto la root oracle del file system una cartella odac\10.2.0 con le librerie di odp.net 10.2
Dall'applicazione apro una connessione (utilizzando in modo estemporaneo) la classe OracleConnection di System.Data.OracleClient del framework 2.0
Al momento dell'apertura mi dà il seguente errore:
OCIEnvCreate failed with return code -1 but error message text was not available
Qualcuno sa come fare ? Grazie. Ciao

I think you deinstall some ..... it will be nice if you can put it in English ;-)
Ming Man

Msiexec failed with return code 1603 / installing SAP MMC Snap-In and creat

I am installing SAP ABAP trial on windows 7 and I have encountered some problems.
Please help me solve this problem.
Phase 2 : install common system files
Error happened during this step: installing SAP MMC Snap-In and creating shortcuts
Error message:
Running msiexec failed with return code 1603: Schwerwiegender Fehler bei der Installation.
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
I have alreday given the permission/rights that are necessary for the user who is installing the system.

Hello All,
We also faced the same error, I would like to share the solution steps which we have applied.
Solution :
Refer Note 1236002 - Error during the SAP MMC MSI installation or uninstallation
As per the note :
Download utility “Microsoft Fix It” from http://support.microsoft.com/mats/Program_Install_and_Uninstall
You have the option to run this utility online or you can download the folder structure following the instructions on this page
Then copy the Fix it Portable folder to the computer with the problem and run the Launch Fix it application
What Microsoft Fix It fixes...
Removes bad registry key on 64 bit operating systems.
Windows registry keys that control the upgrade (patching) data that become corrupted.
Resolves problems that prevent new programs from being installed.
Resolves problems that prevent programs from being completely uninstalled and blocking new installations and updates.
Use this troubleshooter for an uninstall only if the program fails to uninstall using the windows add/remove programs feature.
Best Regards..

Transport request migration failed with return code 12

Hi ,
A transport request was created to capture deletion of bex query via Tcode RSZDELETE. The deletion TR was moved to Quality box successfully and query got deleted. But when same TR was moved to Production box, TR failed with return code 12. Program terminated (job:RDDEXECL). Upon checking the job log overview for this job, runtime error ITAB_DUPLICATE_KEY happend causing session to terminate. can anyone pls suggest me how to fix this issue and why this has caused. Need to fix this immediately as it is in production environment. Please help.
In ST22 i could see the below error details:
Thanks,
Vishnu

as per the dump, system is trying to insert a unique number which is already in the system. You sure the transport is only for deletion of the query? Can you please check the import logs in the test system and should tell you what action performed during import.

CoCreateInstance fails with return code -2147221008

I'm calling
HRESULT retval = CoCreateInstance(SQLNCLI_CLSID, NULL,
                                      CLSCTX_INPROC_SERVER,
                                      IID_IDBInitialize,
                                      (void **) &m_pIDBInitialize);
and it returns the above return code. I don't know what in the world it means or how to get an error message out of it.
The only possible return values for CoCreateInstance listed in
http://msdn.microsoft.com/en-us/library/windows/desktop/ms686615%28v=vs.85%29.aspx
are
S_OK
REGDB_E_CLASSNOTREG
CLASS_E_NOAGGREGATION
E_NOINTERFACE
E_POINTER
#define S_OK                                   ((HRESULT)0L)
#define REGDB_E_CLASSNOTREG              _HRESULT_TYPEDEF_(0x80040154L)
#define CLASS_E_NOAGGREGATION            _HRESULT_TYPEDEF_(0x80040110L)
#define E_NOINTERFACE                    _HRESULT_TYPEDEF_(0x80004002L)
#define E_POINTER                        _HRESULT_TYPEDEF_(0x80004003L)
The values in decimal respectively are 0, 2147746132, 2147746064, 2147500034 and 2147500035. None of them is the value I got.
Please help before I shoot myself.

Hello ,
I would suggest you to have a look at
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/f8417fdc-03e3-4f73-b165-b39a90fb1b90/cocreateinstance-fails-with-return-code-2147221008
It seems that the meaning of this error code is : "CoInitialize has not been called. "
As I have given up VC++ since the arrival of VS 2003 and VC# , I cannot give you more explanations.
A moderator may move your thread towards the VC++ forum if you want more explanations or help ( for myself , I prefer to do the move only after the original poster ( you PriorityCustomer ) has posted his/het agreement.
Have a nice day
Mark Post as helpful if it provides any help.Otherwise,leave it as it is.

Running msiexec failed with return code 1619: While running SOFTWARE PROVISIONING MGR 1.0

Hello All SAP Basis Guys,
Running msiexec failed with return code 1619: getting this error
While running SOFTWARE PROVISIONING MGR 1.0 (for Windows Server on IA32 32bit ) for renaming (Domain name change) the SAP ECC 6.0 server on top of Windows Server 2003 x86 which is a 32 bit OS.
I am using the SAPCAR (for Windows Server on IA32 32bit ) to extract .SAR
can anyone please help me with this ?
List of attached for your reference.
1. Available versions of SPWM for windows in marketplace.
2. Window version details of KC1GSCSAP6 server (GS1 system).
3. Error screen while running SWPM
Thanks,
John

Issue has been resolved, its a bug in SWPM tool.
Problem:
SAPCAR is extrating the "sapmmcx86u.msi" under the folder DBINDEP.
But while running the tool, system is trying to open "sapmmcx86u.msi" from the path "common\install" folder.
Solution:
After you received the error, copy path "sapmmcx86u.msi" to "common\install" folder and you will be good.

DB13 error -- Function DB6_PLAN_DELETE_BATCH failed with return code = Job

Similar Messages

Maybe you are looking for