DB2 error in file db2nodes.cfg on HPUX cluster instalation

I am installing ECC6 SR3 ABAP + DB2 V9.1 in cluster environment on HPUX IA64 + ServiceGuard.
I am with the following problem, DB2 software does not function in second node.
Overview:
node1: host1
node2: host2
virtual host: vthostci
virtual host: vthostdb
ServiceGuard Package
pkgdb (hostnames host1/vthostdb)
pkgci (hostnames host2/vthostci)
Shared Disk
/usr/sap (on package pkgci)
/db2
/db2/db2ecp
/db2/ECP
/db2/ECP/db2dump
/db2/ECP/db2ecp
/db2/ECP/log_dir
/db2/ECP/sapdata1
/db2/ECP/sapdata2
/db2/ECP/sapdata3
/db2/ECP/sapdata4
components installed on node1 (sapinst use virtual hostname)
ASCS on vthostci
DB Instance on vthostdb
CI on vthostci
components installed on node2
Creating Operating System Users (sapinst)
without problems until here, but when movement the DB instance and the ASCS to node2 the DB2 instance does not function, it presents error in the file db2nodes.cfg.
the file db2nodes.cfg contains the following line:
"0 host1 0" (the physical hostname the node1)
My problem is... How to configure DB2 Software/Instance on both node the HA cluster?
Another question, on ERP 2005 SR3 the db2 software is automatically installed by SAPinst in the following directory:/db2/db2<dbsid>/db2_software.
That is correct in cluster environment? because /db2 is shared disk.
Please help me
Thanks.

Hi Licia ,
if you are running an single node and simply switch database from node1 to node2 this should not be a problem since the database software is taken over with the database .
If you have problems taking over the database software due to some issues
( like open files ) you can also keep the database software locally as before , but this then implies to maintain database software twice .
If you are running multiple DB2 nodes on cluster node1 and cluster node2 of course you need
database software installed and maintained locally on both nodes .
Best regards
dirk

Similar Messages

Db2nodes.cfg reading error

Hi,
When i enter to db02 transaction this error appears in SM21:
SQL0443N Routine "SYSPROC.DB_PARTITIONS" (specific name
"DB_PARTITIONS") has returned an error SQLSTATE with
diagnostic text "db2nodes.cfg reading error". SQLSTATE=560B
tabase error -443
Someone can tell me the solution?
Our system is ECC 6.0 EHP4 in Windows 2008 R2 and DB2 V9.5 FP8
Thanks in advanced
Best Regards
Aldo Garcia

Can you give us the output of db2level.
Also the convention for db2nodes.cfg is
nodenum hostname logical port netname resourcename
nodenum hostname logical port -- these are required
so db2nodes.cfg should be
0 netprod 0
try this out and check if there are issues .

Change Error Output File?

A problem with Essbase is that it doesn't handle file paths which include spaces. This means that the default error output file "C:\Program Files\IBM\DB2 OLAP Server\Client\" doesn't work. Now I manually direct the error output to "C:\temp\" instead. Is there a parameter in Essbase with which a can set this as the default error output path?John Smith

This problem has been solved. It was a bug in one of the Oracle programs that creates BI Extract.
Also, please visit my blog for information on AP Check printing in Oracle R12
http://ora12apps.blogspot.com/

TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

Click here and follow the instructions.
(98897)

Web-Disk on OSX 10.9 Give me this error: "Finder got an error: Network file permission error."

Previously I was using OSX 10.8 and Web Disk was working great.
Since I upgraded to OSX 10.9 Web Disk Dont Attach to my compputer and give me this ERROR:
FInder got an error: Network file permission error.
When I got this ERROR first time I searched GOOGLE and found this link: http://cammodude.blogspot.no/
And I did:
To force all connections to be SMB1:
Open A terminal window
paste in the following line followed by the return key(should be all on one line):
echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
What the command does:
Creates a file called nsmb.conf in your home directory at the path ~/Library/Preferences/nsmb.conf.
Adds directives to force SMB connections to use the SMB1 protocol. This is slower but stable.
Then I could use Web Disk on OSX 10.9 after executing this command in Terminal.
But now I restarted my Macbook and now Im NOT able to connect to Web Disk and get the same ERROR.
FInder got an error: Network file permission error
After trying 100 times it attaches 1 time but then show this ERROR:
Can't get <<class cdis>> "my.server.com/2078" of application "Finder".
If this happen then I can see the files in Finder and see the Contents and Size of files but if I open a PHP file in BBEdit then it shows BLANK.. But actually it is NOT blank.
Now Im stuck How can I solve this? All help is highly appericated..
Thank you so much...

Hi,
Make sure to chmod the app, something like this :
chmod -Rf 777 secure_site_WebDisk.app
(in my case the CPanel provided the app for my OSx version.)

[Solved] Error : The file or folder path /Probl?me 1 does not exist

Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)

I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders.

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any

My LR 4 suddenly no longer recognized my memory cards. I am using the same cards and cameras but consisitently get the error message:"files not imported because the files could not be read. they are jpg and nef files...I am stuck without my workhorse! Any advice is helpful. This has never happened in 6 years

answered in your other thread LR 4 suddenly no longer recognizes files.

I have the following error The file "iTunes library.itl" cannot be read because it was created by a newer version of iTunes

Can anyone help me with this problem. I tried updating the latest itunes and it caused an error MSVCR80.dll missing. I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that. I did that but now get the error "the files "itunes library.itl" cannot be read because it was created with a newer version of itunes. I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions. Can anyone please go through step by step (letting me know where I can find what is needed) to enable me to be able tio log into itues again. Thanks

Hi pussygalore,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
Regards,
- Brenden

File Error:Unknown File.

I am getting a "File Error:Unknown file" when i try and save my project. So i am not able to save any changes i make to my project. any thoughts?

Try FILE>Save Project As.
does that work?
Shane

"File error: unknown file" upon movie import

Got a DVD. Extracted the footage with Mac the ripper. Created an mp4 file with Handbrake. It plays fine in Quicktime at 720 by 480 and 23.98 FPS. I've tried importing it into FCP and I get the error, "File error: unknown file". FCP sequence presents are 24 FPS...I've also tried switching it to 23.98 FPS. I've re-encoded the movie in Quicktime to a .mov file with "DV/DVCPRO - NTSC" compression and it still will not import. Any suggestions?

Tried making an AVI in Handbrake. Handbrake just froze everytime and it would never finish.
I should also note that FFMpeg did not like the footage either and would not convert it to a file of any kind.
So I put the DVD into a consumer DVD player and used my Panasonic DVX100B camera to record the footage in VCR mode. The tape turned out fine.
BUT...
I am trying to capture the footage from another low end Canon camera. Usually there is no problem. However, with this particular footage from this cursed DVD, I get a "general error" when I try to capture the footage in FCP.
No matter what file format or media is used, this footage will not import into FCP. It must be watermarked to not like FCP.
Any further suggestions???

File Error: Unknown File when trying to render a Motion Lower third

I'm getting this: "File Error: Unknown File" when trying to render a Lower third made in the Motion tab. I'm using FCP 6.0.6 and haven't had any issues with this before. It seems to work fine if there is just text, but as soon as I apply any effect, like a drop shadow, I get that error message.
Thanks,
Joe

What's the exact format of the video you're working with and the exact specification the sequence you're editing in?

File Error - Unknown file when trying to import from HDD camera

I recently purchased a Panasonic SDR-H80 and am trying to get my widescreen footage into FCP. I converted the .MOD files to .m4v files in Handbrake, and they play and look fine in the Finder. However, when I try to move them into FCP, I get a dialog that says "File Error - Unknown file." I'm not sure what I'm doing wrong here. Can anybody help?

I converted the .MOD files to .m4v files in Handbrake .... I'm not sure what I'm doing wrong here
What you're doing wrong is using Handbrake and trying to use .m4v files in FCP. Neither is the correct process in preparing for editing.
Try using MPEG Streamclip and a format that actually works natively in FCP. .m4v is a final delivery format- not for editing. A search on this forum would have revealed that to you in a matter of seconds: http://discussions.apple.com/search.jspa?objID=c206&search=Go&q=handbrake
-DH

File Error: Unknown File, Cannot Save

I hope this is only a matter of healthy file management, but I'm quite confused and hope someone can clear this up into something of a simple science. On the otherhand, could this be a LIMITATION of FCP?
-Have been editing a sequence from a larger film on a second computer. That sequence has been worked on over several days and saved (of course). However, upon saving last night, was an error message: "File error: Unknown File" and the project could not be saved.
-This is quite possibly due to the fact that both the media and project files have been copied over the network to the first computer where the master project is being assembled.
-HOWEVER, no media files claimed to be offline, everything was editable AND the FILE WOULD NOT SAVE through multiple attempts
-ALSO, the other open project WOULD NOT SAVE either (its files where never moved or otherwise tampered with. It was a small and entirely local operation).
-SAVING was finally accomplished ONLY by saving the project file to the LOCAL HD rather than the EXTERNAL DRIVE where the MEDIA and PROJECT FILES originated and had been previously saved to.
-All other attempts to save to the EXTERNAL were met with the message "FILE ERROR: UNKNOWN FILE" This compromised saving process resulted in the loss of all work, edits, etc. on the LESSER and EXCLUSIVELY local project.
-AFTER saving to the LOCAL HD, the project COULD BE once again saved to the EXTERNAL HD. This flow seemed very strange to me.
-Has anyone else encountered this problem, and what can I correct in my processes to avoid this.
--*Also, the First computer encountered the same problems at the same time, after both EDITING & SAVING had taken place since the last FILE COPYING. Again, work was lost.
Thanks for any help you can offer.
G5 Dual 2 GHz PowerPC Mac OS X (10.4.5) 1.5 GB ram

Do people search this forum at all?!?
Check your project for CMYK files.
Search this forum for General Error.
This was discussed about 90 minutes ago.

File Error: Unknown File when saving

I tried to save my project to the drive I've been working in and saving all day. And all of a sudden Im getting a new error: File Error: Unknown File. What's that all about? It saved fine to another drive.

km@ms, Welcome to the forums.
You have posted in a topic started by someone else in the pro video discussions.
While someone here may well have an answer for you, it would be far better to ask your question as it's own topic. As a rule, you will receive an answer much sooner.
Here is a link to the general discussion category for Mac OS X 10.4:
http://discussions.apple.com/category.jspa?categoryID=177
Here is the link to the "Pages" forum. http://discussions.apple.com/forum.jspa?forumID=1191
While your issue is unrelated to that software product, you stand a better chance of finding someone familiar with Quark and .eps files there.

File Error: Unknown File - when doing save as

yet another variation on the file problems i am having.
opened an aotosave file and tried to 'Save project as",
wont do it, reports "File error: unknown file"
the same error i get often when trying to "save as" the original,
and the same error i get if i make a copy of the FCP file in the finer, open it and try to save it, it wont do it.....
so with the main sequence in my project getting lost ("not found"),
i now find that its almost impossible to make a backup that works....
anyone know about this SERIOUS FAULT.
i can think of no reason why it cant handle the most basic act of keeping assets attached to the program.
new computer, new drives, new everything..
i am now working really scared, when it loses the main sequence again (1 hour), the latest backup that might work could be anything from 1 - 5 days old, who knows, and there goes days of work...
======================================
FCP6
HDV captures.
Main sequence is prores render.
Files and media on one 750G drive in the Mac Pro box.
deleted all render files yesterday, now only about 15 there.
changed MP3 tracks to aif.
have done FCP resue often
have done permissions
have upgraded to 10.4.10

i now find that its almost impossible to make a backup that works....
anyone know about this SERIOUS FAULT.
i can think of no reason why it cant handle the most basic act of keeping assets attached to the program.
new computer, new drives, new everything..
Except that this issue is almost always totally unrelated to FCP at all.
Paulo has dome great anecdotal advice but this is usually a fiel permissions problem. No idea how it gets changed but you can run Disk Utility and repair permissions. Do it twice. then Get Info on your drive and see what the privileges are. Do the same for your FCP projects folders. Get info on your FCP project file itself.
You need to get this figured out before you invest any more time in editing.
bogiesan

DB2 error in file db2nodes.cfg on HPUX cluster instalation

Similar Messages

Maybe you are looking for