DC on VM Restored after crash - Does Not allow PCs to Join Domain, or Domain Users to Log in

We currently had a RAID array crash and rebuilt our main server which housed VMs for our Web and DC.
The main server was restored from a bare-metal backup from 6 months prior to the latest backup of the VMs (not sure if pertinent)
Since the Restore, Domain computers cannot access file shares on the main server or VMs - "unspecified network error
0x80004005
Removed the main server from the Domain to re-join it due to some issues with logging in (even with a Domain Admin account) - Found that any PC removed from the domain was no longer able
to rejoin - Receive (Network path was not found error)
Domain Users cannot log in to their computers - Error reads "The trust relationship between this computer and the domain has been lost" - Domain Admin accounts can log in without
problem.
Have been working on it for two weeks and tried most of the things that I have found in others questions for related 
DCDIAG results (run on DC VM) - More errors appear if run on the Server (Locator DcGetDcName(GC_Server_Required) call failed, error 1722 (same for PDC, TIME, GOOD_TIME, and KDC)
Directory Server Diagnosis
Performing initial setup:
   Trying to find home server...
   Home Server = DC1
   * Identified AD Forest. 
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\DC1
      Starting test: Connectivity
         ......................... DC1 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\DC1
      Starting test: Advertising
         ......................... DC1 passed test Advertising
      Starting test: FrsEvent
         There are warning or error events within the last 24 hours after the
         SYSVOL has been shared.  Failing SYSVOL replication problems may cause
         Group Policy problems. 
         ......................... DC1 failed test FrsEvent
      Starting test: DFSREvent
         ......................... DC1 passed test DFSREvent
      Starting test: SysVolCheck
         ......................... DC1 passed test SysVolCheck
      Starting test: KccEvent
         ......................... DC1 passed test KccEvent
      Starting test: KnowsOfRoleHolders
         ......................... DC1 passed test KnowsOfRoleHolders
      Starting test: MachineAccount
         ......................... DC1 passed test MachineAccount
      Starting test: NCSecDesc
         ......................... DC1 passed test NCSecDesc
      Starting test: NetLogons
         ......................... DC1 passed test NetLogons
      Starting test: ObjectsReplicated
         ......................... DC1 passed test ObjectsReplicated
      Starting test: Replications
         ......................... DC1 passed test Replications
      Starting test: RidManager
         ......................... DC1 passed test RidManager
      Starting test: Services
         ......................... DC1 passed test Services
      Starting test: SystemLog
         A warning event occurred.  EventID: 0x80040022
            Time Generated: 01/15/2015   19:32:28
            Event String:
            The driver disabled the write cache on device \Device\Harddisk0\DR0.
         A warning event occurred.  EventID: 0x80040022
            Time Generated: 01/15/2015   19:32:28
            Event String:
            The driver disabled the write cache on device \Device\Harddisk0\DR0.
         A warning event occurred.  EventID: 0x80040022
            Time Generated: 01/15/2015   19:32:28
            Event String:
            The driver disabled the write cache on device \Device\Harddisk0\DR0.
         A warning event occurred.  EventID: 0x000003F6
            Time Generated: 01/15/2015   19:32:52
            Event String:
            Name resolution for the name DC1.Home.xxx.com timed out after none of the configured DNS servers responded.
         An error event occurred.  EventID: 0xC00038D6
            Time Generated: 01/15/2015   19:33:25
            Event String:
            The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
         A warning event occurred.  EventID: 0x00000420
            Time Generated: 01/15/2015   19:33:29
            Event String:
            The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service.   This is not a recommended security configuration.
 Credentials for Dynamic DNS registrations may be configured using the command line "netsh dhcp server set dnscredentials" or via the DHCP Administrative tool.
         A warning event occurred.  EventID: 0x00002724
            Time Generated: 01/15/2015   19:33:33
            Event String:
            This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
         A warning event occurred.  EventID: 0x000727AA
            Time Generated: 01/15/2015   19:36:34
            Event String:
            The WinRM service failed to create the following SPNs: WSMAN/DC1.Home.xxx.com; WSMAN/DC1. 
         A warning event occurred.  EventID: 0x00001695
            Time Generated: 01/15/2015   19:59:52
            Event String:
            Dynamic registration or deletion of one or more DNS records associated with DNS domain 'Home.xxx.com.' failed.  These records are used by other computers to locate this server as a domain controller (if the specified
domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).  
         A warning event occurred.  EventID: 0x00001695
            Time Generated: 01/15/2015   19:59:52
            Event String:
            Dynamic registration or deletion of one or more DNS records associated with DNS domain 'DomainDnsZones.Home.xxx.com.' failed.  These records are used by other computers to locate this server as a domain controller
(if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).  
         A warning event occurred.  EventID: 0x00001695
            Time Generated: 01/15/2015   19:59:52
            Event String:
            Dynamic registration or deletion of one or more DNS records associated with DNS domain 'ForestDnsZones.Home.xxx.com.' failed.  These records are used by other computers to locate this server as a domain controller
(if the specified domain is an Active Directory domain) or as an LDAP server (if the specified domain is an application partition).  
         A warning event occurred.  EventID: 0x00000420
            Time Generated: 01/15/2015   20:20:21
            Event String:
            The DHCP service has detected that it is running on a DC and has no credentials configured for use with Dynamic DNS registrations initiated by the DHCP service.   This is not a recommended security configuration.
 Credentials for Dynamic DNS registrations may be configured using the command line "netsh dhcp server set dnscredentials" or via the DHCP Administrative tool.
         A warning event occurred.  EventID: 0x00002724
            Time Generated: 01/15/2015   20:20:25
            Event String:
            This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
         ......................... DC1 failed test SystemLog
      Starting test: VerifyReferences
         ......................... DC1 passed test VerifyReferences
   Running partition tests on : ForestDnsZones
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test
         CrossRefValidation
   Running partition tests on : DomainDnsZones
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test
         CrossRefValidation
   Running partition tests on : Schema
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
   Running partition tests on : Configuration
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
   Running partition tests on : Home
      Starting test: CheckSDRefDom
         ......................... Home passed test CheckSDRefDom
      Starting test: CrossRefValidation
         ......................... Home passed test CrossRefValidation
   Running enterprise tests on : Home.xxx.com
      Starting test: LocatorCheck
         ......................... Home.xxx.com passed test LocatorCheck
      Starting test: Intersite
         ......................... Home.xxx.com passed test Intersite
All PCs can ping the DC, and get name resolution.  Checked IPs, DNS on both WS and DC (DC points to its own IP address with no other DNS), Forwarders for DNS appear to be working,
as normal DNS name resolution and internet access works on all PCs.  Have tried disabling NIC card and installing another NIC.  All searches keep pointing back at the same things that I have tried.  I feel like I am missing something stupid.
 Please help

The backup you used is too old. That is why your clients are experiencing trust relationship failures: the computer passwords are no longer matching so they are failing to connect to AD. You need to disjoin and join them again.
I understand that this is the only DC you have so please make sure that the DC is not multihomed, that it points to its private IP address as primary DNS server and 127.0.0.1 as secondary one. Also, you might need to rebuild your SYSVOL folder if you keep
getting the SYSVOL errors: https://support.microsoft.com/kb/315457?wa=wsignin1.0
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

  • Have Yahoo Mail Plus, which does not allow ads. When on my work computer and log into my Yahoo account, ads do appear?? This does not happen on Explorer. Help

    Have a Yahoo Mail Plus account, which does not allow for ads. It works fine on Explorer, but when used on Firefox the same ads always appear both at the top and left margins "Dr. Oz New Weight Loss Secret". Yahoo says it is a Firefox issue. Please help.

    another thing you can try is to [[Reset Firefox – easily fix most problems|reset firefox]].
    in case there are still adverts shown in places where they aren't supposed to be afterwards, it sounds like an issue with malware on the system. please run a full scan of your pc with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.microsoft.com/security/scanner/default.aspx microsoft safety scanner] or [http://www.kaspersky.com/security-scan kaspersky security scan].
    [[Troubleshoot Firefox issues caused by malware]]

  • OWB does not allow full outer join

    I got following error (twice) while validating my mapping: "VLD-1506: Invalid Expression: Mixing full and partial outer joins in one mapping is not supported".
    I have following join conditions in my mapping:
    1) INGRP1.DISTRICT_ID = INGRP2.DISTRICT_ID And INGRP1.CHARGE_PERIOD_ID = INGRP2.CHARGE_PERIOD_ID And INGRP1.UTL_ID = INGRP2.UTL_ID
    2) The same
    3) INGRP1.CHARGE_PERIOD_ID (+) = INGRP2.CHARGE_PERIOD_ID (+) And
    INGRP1.DISTRICT_ID (+) = INGRP2.DISTRICT_ID (+) And
    INGRP1.PROVIDER# (+) = INGRP2.PROVIDER# (+)
    I suppose there is not any partial joins here. I tried to make first and second conditions with full outer joins too:
    INGRP1.DISTRICT_ID (+) = INGRP2.DISTRICT_ID (+) And
    INGRP1.CHARGE_PERIOD_ID (+) = INGRP2.CHARGE_PERIOD_ID (+) And
    INGRP1.UTL_ID (+) = INGRP2.UTL_ID (+) And
    INGRP1.DISTRICT_ID IS NOT NULL And
    INGRP2.DISTRICT_ID IS NOT NULL
    If I do this, validation reports the same error, but six times instead of twice.
    If I remove outer joins OWB generates following mapping statement:
    MERGE
    /*+ APPEND PARALLEL(MMB$ACCOUNT, DEFAULT, DEFAULT) */
    INTO
    "MMB$ACCOUNT"
    USING
    (SELECT
    /*+ NO_MERGE */
    "INGRP1"."DISTRICT_ID" "DISTRICT_ID",
    DIC$TIME_RECODER."MONTH_ID" "MONTH_ID",
    "INGRP1"."PROVIDER#" "PROVIDER#",
    "INGRP1"."ACCOUNT_NO" "ACCOUNT_NO",
    "INGRP2"."ACCOUNT_NO" "ACCOUNT_NO_1"
    FROM "DIC$TIME_RECODER" DIC$TIME_RECODER,
    (SELECT
    /*+ DRIVING_SITE("AGG"."AGG_INPUT_SUBQUERY"."FC_CHARGES_1_GKH_REL2_GKH_STAR") */
    "AGG"."CHARGE_PERIOD_ID" "CHARGE_PERIOD_ID",
    "AGG"."DISTRICT_ID$0" "DISTRICT_ID",
    "AGG"."PROVIDER#$0" "PROVIDER#",
    "AGG"."ACCOUNT_NO$0" "ACCOUNT_NO"
    FROM (SELECT
    ("AGG_INPUT_SUBQUERY"."CHARGE_PERIOD_ID$0") "CHARGE_PERIOD_ID",
    ("AGG_INPUT_SUBQUERY"."DISTRICT_ID$1") "DISTRICT_ID$0",
    ("AGG_INPUT_SUBQUERY"."PROVIDER#$1") "PROVIDER#$0",
    COUNT(DISTINCT ("AGG_INPUT_SUBQUERY"."ACCOUNT_NO$1")) "ACCOUNT_NO$0"
    FROM (SELECT
    "INGRP1"."DISTRICT_ID" "DISTRICT_ID$1",
    "INGRP1"."CHARGE_PERIOD_ID" "CHARGE_PERIOD_ID$0",
    DM_UTILITIES_1_GKH_R14554."PROVIDER#" "PROVIDER#$1",
    "FC_CHARGES_1_GKH_REL2_GKH_STAR"."ACCOUNT_NO" "ACCOUNT_NO$1"
    FROM {"FC_CHARGES"@GKH_REL2_GKH_STAR} "FC_CHARGES_1_GKH_REL2_GKH_STAR",
    {"DM_UTILITIES"@GKH_REL2_GKH_STAR} DM_UTILITIES_1_GKH_R14554,
    (SELECT
    "DEDUP"."DISTRICT_ID$2" "DISTRICT_ID",
    "DEDUP"."CHARGE_PERIOD_ID$1" "CHARGE_PERIOD_ID",
    "DEDUP"."UTL_ID" "UTL_ID"
    FROM (SELECT
    DISTINCT
    "FC_CHARGES_GKH_REL2_GKH_STAR"."DISTRICT_ID" "DISTRICT_ID$2",
    "FC_CHARGES_GKH_REL2_GKH_STAR"."CHARGE_PERIOD_ID" "CHARGE_PERIOD_ID$1",
    "FC_CHARGES_GKH_REL2_GKH_STAR"."UTL_ID" "UTL_ID"
    FROM {"FC_CHARGES"@GKH_REL2_GKH_STAR} "FC_CHARGES_GKH_REL2_GKH_STAR" WHERE ( (MAP_DIC$ACCOUNT."DATE_START") <= coalesce ( "FC_CHARGES_GKH_REL2_GKH_STAR"."CHANGED_DATE_#" , "FC_CHARGES_GKH_REL2_GKH_STAR"."CREATED_DATE_#" ) )) "DEDUP" ) "INGRP1" WHERE ( "INGRP1"."DISTRICT_ID" = "FC_CHARGES_1_GKH_REL2_GKH_STAR"."DISTRICT_ID" ) AND
    ( "INGRP1"."CHARGE_PERIOD_ID" = "FC_CHARGES_1_GKH_REL2_GKH_STAR"."CHARGE_PERIOD_ID" ) AND
    ( "INGRP1"."UTL_ID" = "FC_CHARGES_1_GKH_REL2_GKH_STAR"."UTL_ID" ) AND
    ( ( DM_UTILITIES_1_GKH_R14554."UTL_ID" (+) = "INGRP1"."UTL_ID" ) )) "AGG_INPUT_SUBQUERY"
    GROUP BY
    ("AGG_INPUT_SUBQUERY"."DISTRICT_ID$1"), ("AGG_INPUT_SUBQUERY"."CHARGE_PERIOD_ID$0"), ("AGG_INPUT_SUBQUERY"."PROVIDER#$1")) "AGG" ) "INGRP1",
    (SELECT
    /*+ DRIVING_SITE("AGG_1"."AGG_INPUT_SUBQUERY$0"."FC_PAYMENTS_1_GKH_RE143940") */
    "AGG_1"."PROVIDER#$2" "PROVIDER#",
    "AGG_1"."DISTRICT_ID$3" "DISTRICT_ID",
    "AGG_1"."CHARGE_PERIOD_ID$2" "CHARGE_PERIOD_ID",
    "AGG_1"."ACCOUNT_NO$2" "ACCOUNT_NO"
    FROM (SELECT
    ("AGG_INPUT_SUBQUERY$0"."PROVIDER#$3") "PROVIDER#$2",
    ("AGG_INPUT_SUBQUERY$0"."DISTRICT_ID$4") "DISTRICT_ID$3",
    ("AGG_INPUT_SUBQUERY$0"."CHARGE_PERIOD_ID$3") "CHARGE_PERIOD_ID$2",
    COUNT(DISTINCT ("AGG_INPUT_SUBQUERY$0"."ACCOUNT_NO$3")) "ACCOUNT_NO$2"
    FROM (SELECT
    "INGRP1"."DISTRICT_ID" "DISTRICT_ID$4",
    "INGRP1"."CHARGE_PERIOD_ID" "CHARGE_PERIOD_ID$3",
    DM_UTILITIES_GKH_REL2_GKH."PROVIDER#" "PROVIDER#$3",
    "FC_PAYMENTS_1_GKH_RE143940"."ACCOUNT_NO" "ACCOUNT_NO$3"
    FROM {"FC_PAYMENTS"@GKH_REL2_GKH_STAR} "FC_PAYMENTS_1_GKH_RE143940",
    {"DM_UTILITIES"@GKH_REL2_GKH_STAR} DM_UTILITIES_GKH_REL2_GKH,
    (SELECT
    "DEDUP_1"."DISTRICT_ID$5" "DISTRICT_ID",
    "DEDUP_1"."CHARGE_PERIOD_ID$4" "CHARGE_PERIOD_ID",
    "DEDUP_1"."UTL_ID$0" "UTL_ID"
    FROM (SELECT
    DISTINCT
    "FC_PAYMENTS_GKH_REL2_GKH_STAR"."DISTRICT_ID" "DISTRICT_ID$5",
    "FC_PAYMENTS_GKH_REL2_GKH_STAR"."CHARGE_PERIOD_ID" "CHARGE_PERIOD_ID$4",
    "FC_PAYMENTS_GKH_REL2_GKH_STAR"."UTL_ID" "UTL_ID$0"
    FROM {"FC_PAYMENTS"@GKH_REL2_GKH_STAR} "FC_PAYMENTS_GKH_REL2_GKH_STAR" WHERE ( (MAP_DIC$ACCOUNT."DATE_START") <= coalesce ( "FC_PAYMENTS_GKH_REL2_GKH_STAR"."CHANGED_DATE_#" , "FC_PAYMENTS_GKH_REL2_GKH_STAR"."CREATED_DATE_#" ) )) "DEDUP_1" ) "INGRP1" WHERE ( "INGRP1"."DISTRICT_ID" = "FC_PAYMENTS_1_GKH_RE143940"."DISTRICT_ID" ) AND
    ( "INGRP1"."CHARGE_PERIOD_ID" = "FC_PAYMENTS_1_GKH_RE143940"."CHARGE_PERIOD_ID" ) AND
    ( "INGRP1"."UTL_ID" = "FC_PAYMENTS_1_GKH_RE143940"."UTL_ID" ) AND
    ( ( DM_UTILITIES_GKH_REL2_GKH."UTL_ID" (+) = "INGRP1"."UTL_ID" ) )) "AGG_INPUT_SUBQUERY$0"
    GROUP BY
    ("AGG_INPUT_SUBQUERY$0"."DISTRICT_ID$4"), ("AGG_INPUT_SUBQUERY$0"."CHARGE_PERIOD_ID$3"), ("AGG_INPUT_SUBQUERY$0"."PROVIDER#$3")) "AGG_1" ) "INGRP2" WHERE ( "INGRP1"."CHARGE_PERIOD_ID" = "INGRP2"."CHARGE_PERIOD_ID" ) AND
    ( "INGRP1"."DISTRICT_ID" = "INGRP2"."DISTRICT_ID" ) AND
    ( "INGRP1"."PROVIDER#" = "INGRP2"."PROVIDER#" ) AND
    ( ( DIC$TIME_RECODER."PERIOD_ID" (+) = "INGRP1"."CHARGE_PERIOD_ID" ) )
    ) "MERGEQUERY_325"
    ON (
    "MMB$ACCOUNT"."DISTRICT_ID" = "MERGEQUERY_325"."DISTRICT_ID" AND
    "MMB$ACCOUNT"."MONTH_ID" = "MERGEQUERY_325"."MONTH_ID" AND
    "MMB$ACCOUNT"."PROVIDER_ID" = "MERGEQUERY_325"."PROVIDER#" )
    WHEN NOT MATCHED THEN
    INSERT
    ("MMB$ACCOUNT"."DISTRICT_ID",
    "MMB$ACCOUNT"."MONTH_ID",
    "MMB$ACCOUNT"."PROVIDER_ID",
    "MMB$ACCOUNT"."QNT_CHARGED",
    "MMB$ACCOUNT"."QNT_PAID")
    VALUES
    ("MERGEQUERY_325"."DISTRICT_ID",
    "MERGEQUERY_325"."MONTH_ID",
    "MERGEQUERY_325"."PROVIDER#",
    "MERGEQUERY_325"."ACCOUNT_NO",
    "MERGEQUERY_325"."ACCOUNT_NO_1")
    WHEN MATCHED THEN
    UPDATE
    SET
    "QNT_CHARGED" = "MERGEQUERY_325"."ACCOUNT_NO",
    "QNT_PAID" = "MERGEQUERY_325"."ACCOUNT_NO_1";
    What does it mean? Is JOINER's full outer join is incompatible with KEY LOOKUP operator and KL should be replaced with WB_LOOKUP_NUM?

    Sanders,
    Key lookup always does a partial outer join. When the full outer join and partial outer join conditions are put together, there is no available syntax to facilitate it.
    The way to this to generate the join operator (with full outer join) first in a subquery, then generate the key lookup as the outer query. Or the other way around, first the key lookup then the full outer join. The important part is that the key lookup can't be merged into the FROM-list.
    So there are two workarounds. One is what you already pointed out, using WB_LOOKUP_NUM.
    The other is to explicitly spell out the key lookup logic in the mapping by introducing a join with the lookup table, like this.
    Change
    Table1
    .......... Join (w/ foj cond.) ---> KeyLookup
    Table2
    to
    Table1
    .......... Join (w/ foj cond)
    Table2 ........................ Join (w/ poj cond.) ---> Lookup table
    Nikolai Rochnik

  • Disk utility does not allow to restore Macintosh HD after I deleted a small size (1GB) partition

    Hi, when I tried to create a new 1GB partition (on my Mac mini 2011, using Mac OS X 10.7.3) and then to delete it I could not restore (increase) Macintosh HD size using Disk utility (diskutil list shows the same value for Macitosh HD (498,17GB) partition before and after I deleted a new created 1GB partition).
    Please help, how I can restore the original size of Macintosh HD when Disk utility does not allow to restore Macintosh HD after I deleted a small size (1GB) partition?
    Thank you.

    The bottom right corner dragging does not help in my case, because it shows that Macintosh HD partition size is maximal, but its real size did not change after I removed 1GB partition.
    Maybe any other idea can help me, for example some built-in tool like diskutil which allows to view and manage unused partitions in terminal?
    Thank you.

  • Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

    Make sure the silent switch is not set to mute.  If you can see the red dot, it is on mute.
    It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
    The next step would be to restore as new.
    If none of that works, a warranty exchange would be the resolution.    

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1937 i have a white iphone 4 that says it was approved but restoring from itunes does not show (congrats unlocked message)

    i have a white iphone 4 that says it was approved but restoring from itunes does not show (congrats unlocked message)
    hel

    MaDCrackeR wrote:
    Email from AT&amp;T says the IMEI number was approved for unlocking
    ..........4S that worked fine and it shows the message "congrats unlocked" in itunes
    When restored. But the 4 does not. AT&amp;T insists its unlocked but they are only going off
    Of the request and IMEI number. Is there a way from the phone i can verify it was unlocked?
    If AT&T e-mail says it is unlocked, then believe it is so. Insert non-AT&T SIM inside and after backing up restore in iTunes again. Unlock gets attached.
    You can check the status of the unlock request on AT&T web-site.

  • How come my external hard drive is no longer visible in finder even after ticking it in preferences? it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help.

    it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?

    Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
    My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything.   It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
    Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one.

  • When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https:

    Question
    When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?

    Try some basic troubleshooting.
    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • SM36/37: Specification "After Job" does not work for Daily "periodcity"

    I reviewed http://help.sap.com/saphelp_nw04/helpdata/en/20/2d513897110872e10000009b38f889/content.htm, which states what I am trying to do should work, but it does not.
    Here's the deal:
    1.  I have two jobs: "A" and "B".
    2.  "A" runs Daily.
    3.  I set-up job "B" to run "After job" "A" in my SM36 definition.
    Job "B" will run the next day, but never runs again after that even though job "A" continues to run "Daily" as it should.
    Further info:
    1.  We have "Event-triggered" jobs that run fine, but the "After Job" designation doesn't seem to work ongoingly.
    2.  I can review both jobs "A" and "B" for any "Predecessor" or "Successor" jobs, and, the first jobs to run after the initial set-up DO reference each other (in other words, let's say I schedule job "B" to run "After job" "A" on Tuesday.  After Tuesday's run, Job "A" sees job "B" as it's "Successor" job and job "B" sees job "A" as it's "Predecessor" job), but the definition doesn't last into the next day ONLY FOR JOB "B" (as I mentioned, job "A" always runs fine).
    3.  I can't set the "periodcity" for job "B" because, once I flag it to run "After Job" "A", the "period" options disappear.
    4.  One final tidbit: the variant for job "B" has a "key date" specified so the date is dynamic for each day the job runs.  I can set up job "B" to run "Daily" with this variant and it runs fine, but I wanted it to run AFTER job "A" so it never runs if job "A" doesn't run.  (At this point, it's becoming a matter of principal!)
    Here's my question:
    Why won't job "B" continue to run "Daily" after job "A" (a "Daily" job) runs?
    Thanks in advance,
    Lara

    Please close this thread since you posted the same question here:
    [SM36/37: Specification "After Job" does not work for Daily "periodcity"|SM36/37: Specification "After Job" does not work for Daily "periodcity";

  • After Effects does not support Quadro K4200

    After Effects CC 2014 is running on Windows 7 64bit.
    I installed the latest driver.. After Effects does not support Quadro K4200
    Here is a copy of GPU setting in AE.
    Can you fix this issue?
    Fast Draft:    Available
    Texture Memory:    2048.00 MB
    Ray-tracing:    GPU (unsupported)
    Unsupported GPU enabled for CUDA acceleration
    OpenGL
    Vendor:    NVIDIA Corporation
    Device:    Quadro K4200/PCIe/SSE2
    Version:    2.1.2
    Total Memory:    3.93 GB
    Shader Model:    4.0 or later   
    CUDA
    Driver Version:    6.5
    Devices:    1 (Quadro K4200) (unsupported)
    Current Usable Memory:    3.67 GB (at application launch)
    Maximum Usable Memory:    4.00 GB

    Are you saying that After Effects isn't using your GPU to accelerate the ray-traced renderer even when you tick the box?
    Or are you just asking the AE team to add official support for your GPU to the ray-traced renderer?
    If it's the second, too bad. The AE team has stopped all development on the ray-traced renderer. It is considered obsolete. They are working on better integration with C4D: details of CINEMA 4D integration with After Effects The fact that it ships for free with AE is pretty cool.
    However, if it's the first, alright; let's troubleshoot! What exact version number of AE are you using? (13.0.1? 13.1.0? 13.1.1?) How long does it take to render when you switch the CPU and then how long does it take when you switch it to GPU with the box checked?

  • After trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION"  Please help me out

    I WANT TO PURCHASE NFS MOST WANTED GAME FROM APP STORE BUT IT DOESN'T ALLOW ME TO PROCEED FURTHER
    after trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION"  Please help me out

    In most cases, you can't use a Debit card anymore. So, either redeem an iTunes gift card or use a credit card.

  • TS1702 I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    I HAVE IPOD TOUCH MODEL A1421 AND IT WILL NOT RESTORE AND IS STUCK IN RESTORE MODE. DOES NOT RESTORE WHEN ATTEMPTING THROUGH ITUNES. PLEASE HELP!

    If iTunes sees the iPod, try a manual install, as pointed out on link below.
    Troubleshooting 101
    Some topics covered
    -Basic troubleshooting steps
    -Hard reset instructions
    -Manual restore instructions
    -Hardware troubleshooting
    -Preventive Maintenance
    -Anti-theft & recovery tips
    -Battery-saving tips
    -Repair options
    -Contacting Apple
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Reloaded Adobe Master Suite CS4 to new PC - After Effects does not appear

    Recently had a PC take a lightning strike! Upon re-loading the Adobe Master Suite CS4 to my replacement machine, After Effects does not appear.  Any suggestions besides re-loading the whole suite?  Thanks!

    Thank you Rick. When I look under the program Files Adobe > Adobe After Effects CS4 > the only folders and files are Mocha (Folder) Support Files (Folder) and the Mocha for Afetr Effects Shortcut.
    - Mike

  • HT4946 I backed up and encrypted with password but on restore the password does not work. Advice

    I backed up and encrypted with password but on restore the password does not work. Advice

    After a HD failure on my 2009 iMac,, fittgyed new oner, installedf os (tiger), from original disk, restored all documents etc. changed password with disk utility. over 48 hrs re3setting permissions so switched off. all seemed ok. downloaded combined os updates. Now my password does not work. tried rersetting, no go. Terminal does not have rest password on.
    Any suggestions please

Maybe you are looking for

  • Cannot send email from icloud account from mac

    cannot send email from icloud account from mac running 10.8.2

  • Change the level of isolation in a Informix connection

    Post Author: mibarz CA Forum: Data Integration Iu2019m working over informix and I need to change de level of isolation befor make a Query. The Informix instruction is SET ISOLATION TO DIRTY READ.  In the Data flow we are using the SQL statement obje

  • Cannot create a date in cfformitem type="script"

    I tried to create date variables using "new Date" in cfformitem type="script" and got an error about the "new" reserver word. Therefore, I removed the "new" and tested the script. It worked with the wrong result because the todayDate and selectedDate

  • Hyperlinks show up with a box around them in Pages 2 PDF's.

    I am excited that web links now show up as hyperlinks. However, when I export a .pdf of the document, the hyperlinks end up with a box around them that makes them unreadable. Any idea how to get rid of the box. It doesn't show up in the original docu

  • Time until full keeps increasing on charge.

    I've just replaced my dying Macbook battery with a 3rd party Anker battery. It came half charged and seems to work fine but when I started charging it, the charge% goes up slowly but the Time until Full increases as well. So before it was at 50-somet