Dcmctl listapplication Command Show Some Error Message?
Hi all,
I am Using Oracle 10g Application Server Release1(10.1.2.0.2) on windows 2003 Server R2 Today when i run the listapplications command in dcm control, i am getting the below error message, i have no idea about this error message. Any Idea to resolve this?
Please Note I have done the Application Server Cloning before 5 months after that my applciation server was working fine but the problem Start today i am not able to restart all the system component it showing no system component selected when i tried to select, its disabled means i am not able to select any of the system components.
D:\Ora10gAS\dcm\bin>dcmctl listapplications
Error in JAXP processing: java.net.UnknownHostException: funas.olaminfo: funas.o
laminfo
java.net.UnknownHostException: funas.olaminfo: funas.olaminfo
at java.net.InetAddress.getAllByName0(InetAddress.java:1011)
at java.net.InetAddress.getAllByName0(InetAddress.java:981)
at java.net.InetAddress.getAllByName(InetAddress.java:975)
at java.net.InetAddress.getByName(InetAddress.java:889)
at oracle.webcache.dcm.WebcacheConfTranslator.cacheElementMatches(Webcac
heConfTranslator.java:138)
at oracle.webcache.dcm.WebcacheConfTranslator.parseXMLFile(WebcacheConfT
ranslator.java:245)
at oracle.webcache.dcm.WebcacheConfTranslator.getIASPorts(WebcacheConfTr
anslator.java:640)
at oracle.webcache.dcm.WebcacheConfTranslator.getCachedIASPorts(Webcache
ConfTranslator.java:660)
at oracle.ias.sysmgmt.repository.plugin.simpleconf.SimpleConfTranslator.
nativeToXML(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.pluginframework.StateTranslator.
generateXMLDoc(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.pluginframework.StateTranslator.
init(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.pluginframework.PlugInFramework.
init(Unknown Source)
at oracle.ias.sysmgmt.repository.DcmPlugin.init(Unknown Source)
at oracle.ias.sysmgmt.repository.PluginCollection._initPlugin(Unknown So
urce)
at oracle.ias.sysmgmt.repository.PluginCollection.<init>(Unknown Source)
at oracle.ias.sysmgmt.repository.RepositoryImpl.<init>(Unknown Source)
at oracle.ias.sysmgmt.repository.Repository.getRepositoryInstance(Unknow
n Source)
at oracle.ias.sysmgmt.configsvc.ConfigurationServiceImpl.<init>(Unknown
Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.ias.sysmgmt.smimediator.SysMgmt._getInstance(Unknown Source)
at oracle.ias.sysmgmt.smimediator.SysMgmt._getConfigSvc(Unknown Source)
at oracle.ias.sysmgmt.smimediator.SysMgmt.getConfigSvc(Unknown Source)
at oracle.ias.sysmgmt.smimediator.SysMgmt.getConfigAdapterAccessPoint(Un
known Source)
at oracle.ias.sysmgmt.task.ConfigAdapter.getConfigAccessPoint(Unknown So
urce)
at oracle.ias.sysmgmt.task.ConfigAdapter.init(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.initAdapters(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkInit(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
Error in JAXP processing: java.net.UnknownHostException: funas.olaminfo
java.net.UnknownHostException: funas.olaminfo
at java.net.InetAddress.getAllByName0(InetAddress.java:1016)
at java.net.InetAddress.getAllByName0(InetAddress.java:981)
at java.net.InetAddress.getAllByName(InetAddress.java:975)
at java.net.InetAddress.getByName(InetAddress.java:889)
at oracle.webcache.dcm.WebcacheConfTranslator.cacheElementMatches(Webcac
heConfTranslator.java:138)
at oracle.webcache.dcm.WebcacheConfTranslator.parseXMLFile(WebcacheConfT
ranslator.java:245)
at oracle.webcache.dcm.WebcacheConfTranslator.getIASLogfiles(WebcacheCon
fTranslator.java:627)
at oracle.webcache.dcm.WebcacheConfTranslator.getCachedIASLogfiles(Webca
cheConfTranslator.java:687)
at oracle.ias.sysmgmt.repository.plugin.simpleconf.SimpleConfTranslator.
nativeToXML(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.pluginframework.StateTranslator.
generateXMLDoc(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.pluginframework.StateTranslator.
init(Unknown Source)
at oracle.ias.sysmgmt.repository.plugin.pluginframework.PlugInFramework.
init(Unknown Source)
at oracle.ias.sysmgmt.repository.DcmPlugin.init(Unknown Source)
at oracle.ias.sysmgmt.repository.PluginCollection._initPlugin(Unknown So
urce)
at oracle.ias.sysmgmt.repository.PluginCollection.<init>(Unknown Source)
at oracle.ias.sysmgmt.repository.RepositoryImpl.<init>(Unknown Source)
at oracle.ias.sysmgmt.repository.Repository.getRepositoryInstance(Unknow
n Source)
at oracle.ias.sysmgmt.configsvc.ConfigurationServiceImpl.<init>(Unknown
Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at oracle.ias.sysmgmt.smimediator.SysMgmt._getInstance(Unknown Source)
at oracle.ias.sysmgmt.smimediator.SysMgmt._getConfigSvc(Unknown Source)
at oracle.ias.sysmgmt.smimediator.SysMgmt.getConfigSvc(Unknown Source)
at oracle.ias.sysmgmt.smimediator.SysMgmt.getConfigAdapterAccessPoint(Un
known Source)
at oracle.ias.sysmgmt.task.ConfigAdapter.getConfigAccessPoint(Unknown So
urce)
at oracle.ias.sysmgmt.task.ConfigAdapter.init(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.initAdapters(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.checkInit(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.execute(Unknown Source)
at oracle.ias.sysmgmt.cmdline.DcmCmdLine.main(Unknown Source)
BC4J
ADFBCManager
Olam
D:\Ora10gAS\dcm\bin>
Thanks
Shan
Found this fix in Preflight: Under prepress, I selected my destination, which is sheetfed offpress (CMYK) and ran the analyze and fix. The updated file opened without the error message.
Similar Messages
-
i just brought a apple protection plan as my phone warranty is going to end in a day, after entering the protection plan code and my phone serial no its showing an error message "technical error try after some time", is there any solution for that?
As i need the warranty to extend for another year please help me regarding this issue.
When i bought a new iphone5 in Inda after using it for three days lock button was not working properly and it was warranty claimed and exchanged from apple service center in India, for the same phone I want to extend the warranty but its showing a error message is there any solution?Here is some information on the applecare +:
http://www.apple.com/support/products/iphone.html
It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error. -
My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry -
How to show execution error message from a Process
hi
i have a requirement like to display the error messsage returned by the proceure.
I have a process with point After Submit and validations, where i am calling a procedure which returns the execution status with SUCCESS or FAILURE;
and if it FAILURE, it will return the error_message also, how can i show this message to the user just like how we are showing the process success message/validation message.
And i need to stop the process execution there itself once its got failed;
how can i achieve these two? anyone can give some inputs....
thanks in advance
renjishpaul and denes, thanks for the quick reply...
i tried the both option the message is coming properly. but the thing is i want to stop the execution there itself where i got the error from the procedure and the page should be remained in the same page.
currently i have a page 10(customer search screen), from there i called page 102 (customer edit screen) and in the page 102 i attached the process which includes the procedure to update the customer details;
Normally if update is success, the procedure will return SUCCESS and its navigating to the page 10(customer search screen.). so here if FAILURE is returning by procedure, i need to be in the same page i.e 102(customer edit) by showing the error message..just like a validation message...
currently whatever the procedure returns either SUCCESS or FAILURE, it goes to previous screen, but i need the method just like how the validation works if it fails.
hope you got....
regards
renjish -
How to show a error message to user from report.
I don´t wanna to go in a form builder to create a simple form for just two inputs.
I have put two inputs into reports parameter screen, but I know that reports is not like forms, I cannot use SET_ITEM_PROPERTY to hide an element or put a runtime message to a label.
How can I show an error message when I validate an input from user, when some input trigger raise?
Thanks a lot!The SRW.message doesn't show me no alert on report 10g !!!
is there any restriction that can be made to block the displaying of the alert on the web environnement?
thanks.. -
my iphone4s is not being recognised by the laptop...it is showing an error message as unrecognised device...wat would be the problem?? plzzz help!!!
Some clarifying questions, in hopes that the answers will help somebody help you:
What kind of connection (USB, WiFi, Bluetooth)?
What kind of laptop (MacBook, Windows PC; running what operating system level)?
What kind of connection are you expecting, for what purpose?
Was it working before, or is this the first time you have tried this combination? -
i dwnloaded the ios 7.0.4 on my laptop n tried to update my iphone through lap bt it din wrk its showing some error tht m nt really awre of...some please help me out...!!!!
Do you mind sharing the error message with us?
That would certainly increase the chances for an answer.
Allan -
Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
MacBook Pro (Retina 13-inch, Mid 2014)
Processor 3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB
Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
Thanks!There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
IPhoto shows an error message about an inconsistence
My iPhoto begins to open, but a few seconds later it closes showing an error message about an inconsistence in my iPhoto library. Then it begins to repair but suddenly it closes again.
Thank you.Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
LN -
IIS8 to show cf11 error messages
I just migrated to windows 2012 and cf11.
I'm trying to get IIS8 to show detailed error messages relating to CF errors.
I've found a lot of documentation relating to cf10 and iis7... but it looks like it all leads to dead ends and doesnt work.
Right now on any coldfusion 500 error, I am displaying:
ERROR
An error occurred while executing the application. Please try again or contact the administrator.
It would be great if I could show the CF error to help me troubleshoot the migration headaches a little faster.
thanks
steveThanks for the reply. Yes I had ran the web server configuration tool.
After some trial and error, I viewed the source of the error that we being delivered to me and it had referenced to images in a cfide folder, so that indicated to me that a CF error was being displayed and it wasnt being intercepted by IIS.
So I went back into the debugging and logging tab and fooled around with the settings a little more and it eventually started to work as I expected. -
Adobe Photoshop CC, But now it showing some error. We are having trouble verifying your membership.
Sreejith Technograph Oman wrote:
any body have same error?? and how you solved
What error? You don't even describe the error.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
BOILERPLATE TEXT:
Note that because this is boilerplate text, not all points may apply to any given, specific poster.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Cannot put episodes of American Horror Story onto my Iphone 4s! When I try to sync Tv shows an error message pops up and says these videos cannot be played on this iphone.
Hey dylanburks12,
It sounds like you are seeing issues when attempting to sync videos to your iPod. I have an article that will help explain some possible situations regarding this issue:
iTunes: Videos may be unable to sync to iPhone, iPad, or iPod - Apple Support
http://support.apple.com/en-us/ts1497
Thanks for using the Apple Support Communities!
Cheers,
Braden -
NFC works sometimes and keeps showing read error messages
I have just bought a brand new Sony Xperia Z3 Dual (D6633), but I am having a little boring problem. When I pair my smartband or any other equipment trough NFC it just works after some attempts and keeps showing read error messages every time. It seems to me that is a software issue as it works sometimes. How should I proceed?
Unfortunattely it didn't work, as our credit cards in Brasil don't have NFC technology.
I will try to reset my phone to factory defaults as soon as Lollipop is launched so I reinstall my apps just one time.
If I fix with the firmware update I´ll let you know. If this issue persist I will take to Sony Support Service in my city.
Thanks a lot for your concern. -
My iPhone keeps showing an error message and the external speaker wont work
Ok I have had my iPhone 3GS about 3 months now and recently it has started showing an error message "This accessory is not optimized for this iPhone, you may experience noise caused by mobile interference and a decrease in mobile strength". The external speaker will not work either, the only sound it will produce is the ringtone. Any other sound, message tone, sounds from apps, songs on my ipod, sounds from videos, will not be produced! Although when i plug the head phones in the sound will work for everything and then this error message will come up again and the sound will stop working. It's like the phone thinks it is plugged into a docking system or something. Also the phone will lose signal for long periods of time and sometimes not come back unless i restore the phone. I have tried EVERYTHING and nothing has worked, can anyone help me please?
Or you can try what lots of other people have found, and thats that the base connector is dirty and the contacts are shorted by some debris.
The Apple store guys are good at cleaning them out - if you do it yourself, do not use any liquids at all. -
How to show custom error message in WebADI Excel template?
Hi,
I've created a custom Web ADI integrator and associated it with a 'Procedure' based custom interface.
WebADI Interface API Returns is set to "Error Message".
I'm using raise_application_error(-20001, "Actual Error Message") for invalid rows,but custom error message from PL/SQL is not populated on the excel template.
Instead it is showing "SQL exception occurred during PL/SQL upload".
Am I missing anything? How to show custom error message from Pl/SQL procedure to WebADI Excel template?
TIA
NarasimhaThe custom API errors are visible in the BNE log but not on the Excel.
BNE Log=>
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR BnePLSQLUpload.doUpload: Exception while uploading to PL/SQL API. Error Code: 20001, Message: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
12/10/13 2:52 PM Web ADI Upload Job 13008 ERROR BnePLSQLUpload.doUpload: Stack trace: java.sql.SQLException: ORA-20001: -Please enter CONTAINER_ID - Enter PO_NO -
ORA-06512: at "APPS.XXPO_COSTFACTS_WEBADI_PKG", line 264
ORA-06512: at line 1
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:439)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:395)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:802)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:436)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:186)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:521)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:202)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1005)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1307)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3449)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3550)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4710)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)
at oracle.apps.bne.integrator.upload.BnePLSQLUpload.doUpload(BnePLSQLUpload.java:284)
at oracle.apps.bne.integrator.upload.BneSAXUploader.processDeepestLevel(BneSAXUploader.java:2346)
at oracle.apps.bne.integrator.upload.BneSAXUploader.startElement(BneSAXUploader.java:1182)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1288)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:336)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:234)
at oracle.apps.bne.integrator.upload.BneUploader.processUpload(BneUploader.java:301)
at oracle.apps.bne.integrator.upload.BneAbstractUploader.processUpload(BneAbstractUploader.java:114)
at oracle.apps.bne.integrator.upload.async.BneAsyncUploadThread.run(BneAsyncUploadThread.java:140)
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 WARNING BneOracleWebAppsContext.getTimeZone CLIENT_TIMEZONE_ID has not been set
12/10/13 2:52 PM AJPRequestHandler-HTTPThreadGroup-5 ERROR BneOracleWebAppsContext.getExtraJDBCConnection recieved the same connection as the base connection. There may be transaction problems.
How to show the same error in the excel template?
Here is the package:
CREATE OR REPLACE PACKAGE BODY APPS.XXPO_COSTFACTS_WEBADI_PKG
AS
PROCEDURE upload_data (
P_CONTAINER_ID IN VARCHAR2
, P_SAIL_DATE IN DATE
, P_PO_NO IN VARCHAR2
) IS
--declare
lv_err_msg VARCHAR2(240);
lf_err_flag NUMBER := 0;
ln_temp NUMBER;
BEGIN
--------------------- checking for mandatory parameters---------------------------
IF (P_CONTAINER_ID IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg||'-'||'Please enter CONTAINER_ID - ';
END IF;
-------------Validation for Sail Date Format----------------------
IF (P_SAIL_DATE IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'Enter Sail Date - ';
ELSE
BEGIN
SELECT 1
INTO ln_temp
FROM DUAL
WHERE P_SAIL_DATE = TO_DATE (TO_CHAR (P_SAIL_DATE, 'DD-MON-YYYY'), 'DD-MM-YYYY');
EXCEPTION
WHEN NO_DATA_FOUND THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format';
WHEN OTHERS THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Enter Sail date in DD-MON-YYYY Format'|| SQLERRM;
END;
END IF;
-------------Validation for PO_Number----------------------
IF (P_PO_NO IS NULL) THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'Enter PO_NO - ';
ELSE
BEGIN
SELECT count(1)
INTO ln_temp
FROM PO_HEADERS
WHERE Attribute4 = P_PO_NO;
EXCEPTION
WHEN NO_DATA_FOUND THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' No Oracle PO for Biceps PO#'||P_PO_NO;
WHEN OTHERS THEN
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' Error getting the Oracle PO for Bicpes PO#'||P_PO_NO||' Error-' || SQLERRM;
END;
END IF;
-----------------------Insert Record----------------------------
IF lv_err_msg is NULL THEN
BEGIN
INSERT
INTO XXP2P_HW_COST_FACTORS_STG
CONTAINER_ID
,SAIL_DATE
,PO_NO
, ERROR_FLAG
, ERROR_MSG
,CREATED_BY
,CREATION_DATE
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,LAST_UPDATE_LOGIN
VALUES
P_CONTAINER_ID
,P_SAIL_DATE
,P_PO_NO
,lf_err_flag
,lv_err_msg
,FND_GLOBAL.USER_ID
, trunc (sysdate)
,FND_GLOBAL.USER_ID
, trunc (sysdate)
,FND_GLOBAL.LOGIN_ID
-- commit;
DBMS_OUTPUT.put_line
'-' || 'After ap_invoices_interface'
EXCEPTION
WHEN OTHERS THEN
ROLLBACK;
lf_err_flag := 1;
lv_err_msg := lv_err_msg || ' ' || 'error loading CONTAINER_ID-' || P_CONTAINER_ID || SQLERRM;
raise_application_error(-20001, lv_err_msg);
END;
ELSE
raise_application_error(-20001, lv_err_msg);
END IF;
END upload_data;
END XXPO_COSTFACTS_WEBADI_PKG;
Maybe you are looking for
-
Using SQL Server 2008 R2: I have a star schema with a fact table containing the following: ID BIGINT IDENTITY, FK_Dimension1 BIGINT, FK_Dimension2 BIGINT, dataValue NUMERIC(20, 8), classification NVARCHAR(20) The classification defines the security c
-
Problem overclocking A64 x2 3800+ with K9A2 CF !
Hi there, I have an A64 x2 3800+ (windsor) on a MSI k9A2 CF (AMD 790X) with a pair of GeIL 1Gb DDR2 800 CL4 (4-4-4-12) and I'm trying to boost it up... I've followed some guides and I was able to determine the maximum speed of each component. With a
-
Vendor Master Extraction from Legacy
Hi guys, We have 2 different legacy systems here (4.5b and 4.6c) and I am trying to extract the vendor master from both of them and integrate them into the new mysap2004. What is the best way to extract the vendor master along with the address , punc
-
Not all albums appear in iTunes despite trying several fixes...
iTunes does not recognise CDs imported using Windows media player (despite converting to mp3 and following instructions to "consolidate library"). How do I get iTunes to "see" all of the albums I know exist in the iTunes folder in My Documents? Thank
-
I drew a red circle where should be these vertical lines showing that i can change the width of the panel, but they are missing with some of the windows (color and paragraph at the moment), at the beginning it was ok, but at some point the color pane