Default storage for locally managed tablespaces

the documentation says you cannot have a default storage parameter for locally managed tablespaces. Does this mean that we cannot specify
INITIAL
NEXT
PCTINCREASE
MINEXTENTS
MAXEXTENTS for such tablespaces, or is there another way we can, without using default storage?
thanks

I amnot sure where you read that part that the default storage clause can't be given.Please see here,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#sthref1149
From the doc,
Creating a Locally Managed Tablespace
If the CREATE TABLESPACE statement includes a DEFAULT storage clause, then the database considers the following:
If you specified the MINIMUM EXTENT clause, the database evaluates whether the values of MINIMUM EXTENT, INITIAL, and NEXT are equal and the value of PCTINCREASE is 0. If so, the database creates a locally managed uniform tablespace with extent size = INITIAL. If the MINIMUM EXTENT, INITIAL, and NEXT parameters are not equal, or if PCTINCREASE is not 0, the database ignores any extent storage parameters you may specify and creates a locally managed, autoallocated tablespace.
If you did not specify MINIMUM EXTENT clause, the database evaluates only whether the storage values of INITIAL and NEXT are equal and PCTINCREASE is 0. If so, the tablespace is locally managed and uniform. Otherwise, the tablespace is locally managed and autoallocated.
HTH
Aman....

Similar Messages

  • Locally Managed tablespaces?

    Into the Design Editor, Admin tab: How can I define a tablespace as Locally Managed?

    Harvinder,
    Locally managed tablespaces are part of the new features of Oracle 8i. the advantages
    are when they database objects need to allocate space, they need not go through the
    data dictionary, they can find the free space
    through bitmaps in the datafile, hence the name locally managed tablespaces.
    this improves performance because recursive sql (update/insert/select of data dictionary tables) is avoided.
    temporary tablespaces are prime candidates for locally managed tablespaces.
    yes the whole database can be created with locally managed tablespaces..but with some restrictions. see oracle documentation for further details.
    Mukundan.

  • Create table with storage parameters in a locally managed tablespace

    Hi,
    Can we create object with storage parameters in a locally managed tablespace.
    CREATE TABLE my_hash_table_6 (
    name VARCHAR2(30),
    value VARCHAR2(4000) )
    STORAGE (
    INITIAL 1M
    NEXT 512K
    PCTINCREASE 0
    MINEXTENTS 2
    MAXEXTENTS UNLIMITED )
    users default tablespace is locallly managed.
    Then this table's extent management will be managed as per the tablespace or as the storage parameters which
    were specified at the time of table creation.

    Why don't you try it yourself ?
    TEST@db102 > select * from dba_tablespaces
      2  where TABLESPACE_NAME='USERS';
    TABLESPACE_NAME                BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
    MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS    CONTENTS  LOGGING   FOR EXTENT_MAN
    ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION   BIG
    USERS                                8192          65536                       1
    2147483645                   65536 ONLINE    PERMANENT LOGGING   NO  LOCAL
    SYSTEM    NO  AUTO   DISABLED NOT APPLY   NO
    TEST@db102 > CREATE TABLE my_hash_table_6 (
      2  name VARCHAR2(30),
      3  value VARCHAR2(4000) )
      4  STORAGE (
      5  INITIAL 1M
      6  NEXT 512K
      7  PCTINCREASE 0
      8  MINEXTENTS 2
      9* MAXEXTENTS UNLIMITED )
    TEST@db102 > /
    Table created.
    TEST@db102 > select * from user_segments
      2  where segment_name='MY_HASH_TABLE_6';
    SEGMENT_NAME
    PARTITION_NAME                 SEGMENT_TYPE       TABLESPACE_NAME
         BYTES     BLOCKS    EXTENTS INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
    MAX_EXTENTS PCT_INCREASE  FREELISTS FREELIST_GROUPS BUFFER_
    MY_HASH_TABLE_6
                                   TABLE              USERS
       2097152        256          2        1572864                       1
    2147483645                                         DEFAULT
    TEST@db102 >

  • Storage clause for locally manged tablespace with unifom size extents

    in oracle 9i PERSONAL EDITION
    I HAVE CREATED A TABLESPACE TEST1 AS LOCALLY MANAGED WITH UNIFORM SIZE AS 256K.MY DB_BLOCK_SIZE IS 4K
    I HAVE CREATED A TABLE XYX IN THE TEST1 TABLESPACE WITH THE STORAGE (INITIAL 52K NEXT 52K)
    WHEN I QUERIED THE DBA_EXTENTS IT SHOWS THE INITAIL EXTENT AS 256 K
    BUT WHEN I QUERIED THE DBA_SEGMENTS IT SHOWS THE INITAL_EXTENT AS 52K.
    IS THEIR ANY SIGNIFICANCE OF SPECIFYING THE STORAGE CLAUSE IN LOCALLY MANAGED TABLESPACES.

    take a example what is effect of set storage parameter in table whoes tablespace is locally manager and have uniform size
    i have a tablespace whoes
    [b]uniform size is 32k
    but when i create a table then i set initial 128k
    now when table is create it create 4 extent
    of 32 each(32*4=128)
    because tablespace uniform size is 32
    if we give intial 256 then it create
    8 extent(32*8=256)
    like
    create tablespace tt_check
    datafile 'E:\ORACLE\SAFE_DATA\tt_check.dbf' size 10m
    extent management local uniform size 32k;
    create table tt_1
    (no number)
    tablespace tt_check
    storage(initial 128k
    next 128k);
    1* select extent_id,segment_name,tablespace_name,bytes from dba_extents where segment_name='TT_1'
    QL> /
    EXTENT_ID SEGMENT_NAME TABLESPACE_NAME BYTES
    0 TT_1 TT_CHECK 32768
    1 TT_1 TT_CHECK 32768
    2 TT_1 TT_CHECK 32768
    3 TT_1 TT_CHECK 32768
    hope it will help you
    kuljeet pal singh

  • Explain local manage tablespace and dictionary manage tablespace

    hi all,
    kindly help me to understand local manage and dictionary manage tablespace
    i have read search result and oracle corporation book still unable to understand
    what i know that local is managed by bitmap(no redo) and dictionary is managed by dictionary(generates redo) plz explain this as well
    and also suggest me some documentation.
    thanks
    Navin

    Navin,
    These are excerpts from Oracle documentation
    Dictionary Managed Tablespace_
    If you created your database with an earlier version of Oracle, then you could be using dictionary managed tablespaces. For a tablespace that uses the data dictionary to manage its extents, Oracle updates the appropriate tables in the data dictionary whenever an extent is allocated or freed for reuse. Oracle also stores rollback information about each update of the dictionary tables. Because dictionary tables and rollback segments are part of the database, the space that they occupy is subject to the same space management operations as all other data.
    Lcaolly Managed Tablesapce_
    A tablespace that manages its own extents maintains a bitmap in each datafile to keep track of the free or used status of blocks in that datafile. Each bit in the bitmap corresponds to a block or a group of blocks. When an extent is allocated or freed for reuse, Oracle changes the bitmap values to show the new status of the blocks. These changes do not generate rollback information because they do not update tables in the data dictionary (except for special cases such as tablespace quota information).
    Locally managed tablespaces have the following advantages over dictionary managed tablespaces:
    Local management of extents automatically tracks adjacent free space, eliminating the need to coalesce free extents.
    Local management of extents avoids recursive space management operations. Such recursive operations can occur in dictionary managed tablespaces if consuming or releasing space in an extent results in another operation that consumes or releases space in a data dictionary table or rollback segment.
    The sizes of extents that are managed locally can be determined automatically by the system. Alternatively, all extents can have the same size in a locally managed tablespace and override object storage options.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/physical.htm#sthref518
    Regards

  • Portal, Tablespace defragmentation and Locally Managed tablespaces

    We are setting up a Big portal installation. We want to use seperate small, medium and large tablespaces for data, lobs and index as described in the de-fragmention start living white paper. We will also use locally managed tablespaces.
    Has anybody set-up a portal installation like this. What where the large and medium data, index and lob segments ?
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by David Stoller ():
    Anyone try using IFS in a Locally Managed Tablespace? Is it OK?<HR></BLOCKQUOTE>
    Yes, we have all tablespaces managed locally. No problems with that.

  • Bitmap indexes to track extents in locally managed tablespaces

    does any body have any idea that how oracle tracks free and used extents with bitmap indexes in locally managed tablespaces ?
    please reply

    There are no bitmap indexes, there is a 64k tablespace header block containing the bitmap of occupied and free extents.
    Sybrand Bakker
    Senior Oracle DBA

  • Rollback segment in locally manage tablespace

    Is it possible to create rollback segment in
    locally manage tablespace in oracle 8i(8.1.6)
    kuljeet pal singh

    Srini,
    Both the 10gR2 and 11gR2 versions of the database are using automatic undo management.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL> show parameter undo
    NAME TYPE VALUE
    _undo_autotune boolean TRUE
    undo_management string AUTO
    undo_retention integer 14400
    undo_tablespace string UNDOTBS1
    SQL>
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> show parameter undo
    NAME TYPE VALUE
    undo_management string AUTO
    undo_retention integer 14400
    undo_tablespace string UNDOTBS1
    SQL>
    Do you know anything about Oracle no longer automatically creating R0 in 11gR2?
    Thanks,
    Bill

  • Locally managed tablespaces in Apps 11.0.3

    Hi,
    we are on Oracle Apps 11.0.3. we recently upgraded the database to 8i ( 8.1.7.4 ). I would like to change some high activity tablespaces to locally managed tablespaces to improve performance. Are there any issues in doing this ? Can I benefit from this or will I have any issues.
    thanks
    Ram

    We moved all the tablespaces to locally managed. Although we convereted the tablespaces to locally managed, occassionally we would see some of the ddl commands hang, cause being system still trying to update fet$ and uet$ tables. We were able to fix this by creating new locally managed tablespaces and move the contents to new locally managed tablespaces.

  • Downsides to Locally Managed Tablespaces?

    I am creating a database from scratch and am looking at locally managed tablespaces.
    Are there any downsides to locally managed tablespaces?
    I understand that if the SYSTEM tablespace is locally managed, then all other tablespaces need to be locally managed. Are there any cons to this?

    <quote source="AskTom.oracle.com">
    Locally managed tablespaces are much faster at allocating and de-allocating
    extents - many order of magnitudes faster.
    locally managed tablespaces decrease contention on the data dictionary.
    There is nothing bad about them, only good things.
    </quote>
    http://asktom.oracle.com/pls/ask/f?p=4950:8:720407411417074486::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:409670433426

  • Management port for management switch(2960x) / IP default-gateway for L2 management switch

    1)   
    I am going to connect all mgmt ports of server to this access switch (L2; 2960x) like below. Then I have a management port in 2960x (FastEthernet / L3 port). As you can see below, even though one of Core switch is down, I am able to access through the other Core switch for mgmt SW. Do I need this FastEthernet port of 2960X?
    Core Pri -------  Core Sec   (Core Pri 192.168.1.2 / Sec 192.168.1.3 / HSRP VIP 192.168.1.1)
                mgmt SW ----- (FastEthernet0) ------ Goes to where? I don't have RAS (Remote Access Server)
                      |
                      |
          servers' mgmt ports
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swint.html#wp2220949
    2) From server side, server put default gateway (192.168.0.1) so if destination is not known, it dumps all to default gateway. This is L3. I understand this. What about L2 default gateway from switch itself? The L2 access switch supports "ip default-gateway" command. I know that without this command still servers do not have any problems to connect to network. Then this command is for switch (2960x) itself? i.e I log into the switch and ping google.com then switch will try to resolve through DNS, but if DNS is not set up in the switch, it sends all traffic to "ip default-gateway"? Is it right?
    3) If L2 (Access) switch has multiple data vlans and mgmt vlan (10.0.0.0/24  10.0.10.0/24 192.168.0.1). Then what will be the "ip default-gateway" for this switch?
    Thanks for your time and knowledge.
    ======================== Reference from Cisco regarding ip default-gateway --------------------------------------
    How to configure the ip default-gateway command on a Cisco 3550 series switch
    VERSION 2 
    Resolution
    To define a default gateway when IP routing is disabled, issue the ip default-gateway global configuration command. Then, enter the IP address of the next-hop router interface that is directly connected to the switch where a  default gateway is being configured.
    The default gateway receives IP packets with unresolved destination IP addresses from the switch. Once the default gateway is configured, the switch has connectivity to the remote networks with which a host needs to communicate.
    Note: When the switch is configured to route with IP, it does not need to have a default gateway set.
    For more information, refer to Assigning the Switch IP Address and Default Gateway.
    ip default-gateway
    https://supportforums.cisco.com/docs/DOC-5090

    Vlan 99 is management port. This is an access switch. I am accessing this swtich through SSH remotely (10.1.2.x)
    WirelessSWLab#sh ip int b
    Interface              IP-Address      OK? Method Status                Protocol
    Vlan1                  unassigned      YES NVRAM  administratively down down   
    Vlan99                 10.1.99.35      YES manual up                    up     
    GigabitEthernet0/1     unassigned      YES unset  up                    up     
    GigabitEthernet0/2     unassigned      YES unset  down                  down   
    GigabitEthernet0/3     unassigned      YES unset  down                  down   
    GigabitEthernet0/4     unassigned      YES unset  down                  down   
    GigabitEthernet0/5     unassigned      YES unset  down                  down   
    GigabitEthernet0/6     unassigned      YES unset  down                  down   
    GigabitEthernet0/7     unassigned      YES unset  down                  down   
    GigabitEthernet0/8     unassigned      YES unset  down                  down   
    GigabitEthernet0/9     unassigned      YES unset  down                  down   
    GigabitEthernet0/10    unassigned      YES unset  down                  down   
    GigabitEthernet0/11    unassigned      YES unset  down                  down   
    GigabitEthernet0/12    unassigned      YES unset  down                  down   
    GigabitEthernet0/13    unassigned      YES unset  down                  down   
    GigabitEthernet0/14    unassigned      YES unset  down                  down   
    GigabitEthernet0/15    unassigned      YES unset  down                  down   
    GigabitEthernet0/16    unassigned      YES unset  down                  down   
    GigabitEthernet0/17    unassigned      YES unset  down                  down   
    GigabitEthernet0/18    unassigned      YES unset  down                  down   
    GigabitEthernet0/19    unassigned      YES unset  down                  down   
    GigabitEthernet0/20    unassigned      YES unset  down                  down   
    GigabitEthernet0/21    unassigned      YES unset  down                  down   
    GigabitEthernet0/22    unassigned      YES unset  down                  down   
    GigabitEthernet0/23    unassigned      YES unset  down                  down   
    GigabitEthernet0/24    unassigned      YES unset  up                    up     
    WirelessSWLab#

  • I Cant able to change default storage for camera in my Tab

    I cant able to change my default camera storage to memory card. My internal  storage is full and i cant able to take pictures. Please let me know any solution without deleting the items from phone. I have already downloaded file manager and using the same but i cant able to move files to memory card.

    Hey @Mithunmk ,
    Welcome to the HP Forums.
    I understand you're unable to take photos on your tablet because the internal storage is full.
    The easiest solution is to move the files to the external storage with something liek ES File Explorer. Without knowing which tablet you are using, and the version of Android installed on it there isn't much I can offer you for support.
    For information on finding your product or model number click here: Finding Your HP Product Model Number.
    Thanks.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Default directory for FIle Manager

    Hi,
    I am working on file manager for my final year project. I am using jsp, Tomcat and Linux as OS.
    The question is,
    "Is there any way to authenticate users from OS(linux or windows 2000) and how can i set user home directory(e.g. home/sahsan/) to my file manager default directory"
    I really appreciate if anybody help me in this regard. I am ready to read any article,tutorial or even any book chapter for this purpose. Coding Help will be best choice ;-)
    Thank you.
    Regards,
    Syed Ahsan

    I am not sure, i am in search of the code as well. pls let me know if u come across something. i will keep u posted if i know some.........
    Riz

  • How to show default values for properties managed by UUP

    Is there a way to load default values of properties from an external source while
    associating a user with property sets managed by UUP ?
    We are trying to write a Custom User Profile using UUP so that some of the User
    Profile attributes can be stored using an existing Oracle database schema. But
    the values for some of these properties(Profile property set attributes) has to
    come from another table which already exist. So the idea is that when a new user
    is being associated with the Custom property set using Portal Admin Tool, the
    available values for an individual property has to be pulled from from a database
    table. Like when selecting a user's home city he can select the name of all cities
    already existing in a database table.
    I couldn't find a way to do this using the EntityPropertyManager. Anyone has
    any idea how to do this?
    Thomas.

    Hi Thomas,
    Yes, the UUP framework is flexible enough for you to easily load default
    values of properties from some external source. You can do this if you
    deploy your own UserProfileManager that uses a custom PropertySetManager.
    When UserProfileManager.getProperty() is called, it looks for the property
    for that user and then for the user's implicit and explicit successors
    (implicit = persisted for that property set, explicit = given as an argument
    in the method call)...if it doesn't find the property (gets null) then it
    does this:
    PropertySet set = getPropertySetManager().getPropertySet(
    getPropertySetType(), propertySet );
    if ( set != null )
    PropertyDefinition def =
    set.getPropertyDefinition( propertyName );
    if ( def != null )
    result = def.getDefaultValue();
    Check out the javadoc for the classes I have mentioned and check out the
    ejb-jar.xml depoyment descriptor for the UserProfileManager in usermgmt.jar:
    <!-- property set manager -->
    <ejb-ref>
    <ejb-ref-name>ejb/PropertySetManager</ejb-ref-name>
    <ejb-ref-type>Session</ejb-ref-type>
    <home>com.bea.p13n.property.PropertySetManagerHome</home>
    <remote>com.bea.p13n.property.PropertySetManager</remote>
    </ejb-ref>
    There are two options for deploying a UUP: 1) use the default
    UserProfileManager deployment with your custom EntityPropertyManager
    deployment, or 2) use your custom deployment of the UserProfileManager with
    your custom EPM deployment.
    In almost all cases, option 1) is done. However, in your case, you need to
    modify the behavior of the UserProfileManager so you must redeploy a
    custom-configured version. This means you will have to register a new
    ProfileType for your users with the DD for the UserManager EJB (because your
    special users don't use the default UserProfileManager) like this:
    <ejb-ref>
    <ejb-ref-name>ejb/ProfileType/WLCS_Customer</ejb-ref-name>
    <ejb-ref-type>Session</ejb-ref-type>
    <home>com.bea.commerce.ebusiness.customer.CustomerProfileManagerHome</home>
    <remote>com.bea.commerce.ebusiness.customer.CustomerProfileManager</remote>
    </ejb-ref>
    If you didn't need to retrieve the default values from your own data source,
    here is how you could get the default values using the default deployment of
    the UserProfileManager:
    * use the EBCC to create a property set (a.k.a "user profile") that matches
    your UUP property set name. Create the properties in this pset and the
    default values. When the UserProfileManager.getProperty() call fails to
    find the property value in your UUP (gets null) it will use the default
    PropertySetManager to get metadata about that property from the Portal
    schema (which you just set up using the EBCC) and it will return the default
    value that you set in the EBCC.
    I recommend you study the 2 options for deploying a UUP, especially the
    option for deploying a custom version of the UserProfileManager by checking
    out the sample UUP on dev2dev.bea.com and by looking at the Portal 4.0 docs.
    I don't know if the 7.0 docs have as much detail about this. Also, when you
    sit down to implement your custom PropertySetManager you may have to contact
    support for some of the details. For instance, how to instantiate a
    PropertySet.
    Ture Hoefner
    BEA Systems, Inc.
    www.bea.com
    "Thomas KJ" <[email protected]> wrote in message
    news:[email protected]...
    >
    Is there a way to load default values of properties from an externalsource while
    associating a user with property sets managed by UUP ?
    We are trying to write a Custom User Profile using UUP so that some of theUser
    Profile attributes can be stored using an existing Oracle database schema.But
    the values for some of these properties(Profile property set attributes)has to
    come from another table which already exist. So the idea is that when anew user
    is being associated with the Custom property set using Portal Admin Tool,the
    available values for an individual property has to be pulled from from adatabase
    table. Like when selecting a user's home city he can select the name ofall cities
    already existing in a database table.
    I couldn't find a way to do this using the EntityPropertyManager. Anyonehas
    any idea how to do this?
    Thomas.

  • WebView's default location for local resources

    I did a bunch of searching but have not been able to see where the default path location is for WebView when resources, such as images, css or html files, are specified locally.
    In other words, if I specify a <img src="pic.png"/>, where does the resolution to the pic.png occur assuming that the html was loaded using loadContent("...html page as a string...").
    I have a number of local web pages to display with customized content and I need to specify many different local resources, images, javascript and stylesheets. The topmost web page is loaded as a classpath resource, converted into a string then loaded using WebEngine.loadContent. The location property is blank in this case.

    Well, I really need this to work, so I pushed on. It seems that there is no good way to anchor the "location" if you load WebEngine using loadContent. So I went ahead and experimented with an URL handler. Since my application does not use any other components that set the URL handler factory, I set my own and created a classpath URL handler. If you use OSGi there are nicer ways to set this, but the code below worked for me. I now load the WebEngine using load instead of loadContent.
    The scala URL handler code which is not very exciting is here.

Maybe you are looking for

  • Infotype 2011 corresponding  RFC in Component version 5.0

    Hi all ,    I am very new to SAP. Basicaly i am a XI consutnat. Now i am working on HR scenario infotype 2011. what my task is i have to insert employee, third party access control data to the R/3 system. I am woking on SAP ERP Central Component 5.0.

  • Mail crashes when typing an email address

    Hi, I just bought a MacBookPro thinking it would be the end of my troubles with Mail. But I was wrong. I really just turned it on for the first time. The 1st and ONLY thing I did till now was installing Adobe programs, backing up my Safari bookmark l

  • I need to find a working file for the Adobe Download assistant?

    i need to find a working file for the Adobe Download assistant?

  • Format of DateTime

    Hey, I'm curious at formatting a date time a certain way. I'm working with XMLBeans and have a node with datatype DateTime. According to the article: http://www.w3schools.com/schema/schema_dtypes_date.asp The section under "DateTime Data Type" specif

  • License Transfer process

    From the below link: http://helpx.adobe.com/x-productkb/policy-pricing/transfer-product-license.html Stated that "Contact us to obtain a case number." But how to do this? The link push me to the forum...