Default Time Admin in IT0001 using OM Relationships

Hi All
Is there a way by which we can default a Time Admin by using the OM relationships.
I see that there exists a relationship --> 290 - "Has Administrator".
Can this relationship be used to default the Time admin either at the Org Unit level or at the Position level?
Should I also be changing the PINCH feature?
Thanks in Advance
Shyam

Hi,
No, there are no SAP standard functions like you need.
However, you can do enhancement PBAS0001 (transaction SMOD) or implement BADI HRPAD00INFTY (SE18) to default values according with your needs.
Cheers

Similar Messages

How to default time in CAT 2 using the enhancement CATS0006

Dear Freinds,
in the Cat2 (timesheet) transaction i would like to default time base on the no of the hours entered ont he selection screen , I have tried using the CATS0006.
i have kept break poin in this include ZXCATU05 of the function module EXIT_SAPLCATS_006.
however iam not able to get the data , could any one please let me know how to write code .
actually i want to default for the fields(BEGUZ1 to ENDUZ1) for the no of hours entered in the field(DAY1) based on the wage type (overtime).
If any one has done this please help me.
regards
madhuri

Normally, if you enter 2 fields of either of 3 fields (HRS, BEGUZ, ENDUZ) third field will be defaulted.
Anyway try setting feauter HRSIF=0 (to generated clock times)
Hope this will help you!

Custom Relationship or Evaluation Path needed for 'Time Admin' Scenario

Hello all Gurus,
I am looking for some direction on a scenario that I am trying to accomplish.
The position u201CLEAD Solutions Architectu201D, in the example below, is going to be what we will classify as a Time administrator. The function on this Time Admin will to be to correct an employeeu2019s punch exceptions via a portal application (ITC). But, my issue is that I need this user/position to be able to view all organizations and their people down below.
I have tried creating a custom evaluation path and I can get it to work down to the ORG, but not to the employee.
Also, I have created an ABAP program and routine to tie to a custom relationship, but when I attempt assign the new program, the program name disappears after clicking on new entry (T77EV-PROGR).
EXAMPLE
IT Infrastructure          O(rganization)
                    Lead Solutions Architect     S    (TIME ADMIN)
     Director, IT Infrastructure     S
     Operations Services          O(rganization)          Below Organization 'IT Infrastructure'
          Senior Support Specialist                          S
          Senior Operations Coordinator     S
          Manager, Operations Services     S
          Intern, IT Intern                          S
          Operations Servies Analyst     S
          Customer Support Services     O(rganization) Below Organization 'Operations Services'
               Support Specialist     S
               Support Specialist     S
               Support Specialist     S
END
Any advice or direction on this would be highly appreciated.
Thanks,
Mike

Hello Brad,
Thank you for your response. Here is the requested information.
1) Is it a customer ITC app in the portal?
a) This is SAPs iTime Clock for punch edits
2) Are you using structural auth's ? also have you checked to make sure the time admin user has the right auth's to see people?
a) We do use Structural auth and I have already opened that orgranization up to my test Time Admin
3) Post the eval path you have so far.
10     US     B     008     Holder      *      S
20     P     B     008     Holder      *      S
30     S     A     003     Belongs to      *      O
40     O     B     003     Incorporates      *      *
Appreciate your help on this,
Mike

Providing HR Admin/TIme Admin view like MSS

Hi,
I am trying to develop Time Admin/HR Admin/Delegated MSS view just Like MSS . So, these administrator can see the employees and approve time and request leave request and perform clock-in/out entries.
As you know MSS goes A012 relationship. I tried to use B290 relationshipvfor this one. but MSS Team calendar views are not showing the employees.
How cana achive through OADP. What kind Group Views I can use.
What exactly the steps I need to perform.
Is there any other group org structure views I need to use.
Thanks in advance.
Regards,
Mark
Edited by: Mark Komaragiri on Feb 10, 2012 6:02 PM

Now regarding Custom relationship, Yes adding in evaluation path should work in T77AW and then adding to the correct organization view in OADP customization as explained in WIKI or you can use FM.
check the wiki for the exact tables etc,
Let me know if you run into any issues.
Also regarding the EHp5 roles,
You can create a area group of EHp4 and then add that into EHp5 using LPD_cust
or use two different roles

Performance problems related to Timesheet entry and Time Admin processing.

Implementing 9.0, they are in UAT, experiencing performance delays on timeadmin and timesheet page when using apply rules button, they have quite a bit of rules and when number of users increase to 30 concurrent users severe performance issue are experienced on timesheet, at this point they are more concerned with the timesheet performance than the time admin performance, they have delayed their go live date until this issue gets resolved.
In the Performance Monitor data were are getting several failed status' for the PMU 'JOLT Request' and PMU Details 'ICPanel'. In the additional data area it states:
Error Status Code:
Jolt ServiceException: Jolt Errno 100 JoltException.TPEJOLT
PeopleSoft 9.0
Weblogic 9.2
Database:SQL Server 5 SP3
Windows Server 2003 SP2

Have you tried raising a SR on oracle support?
Also, Timesheet performance is a known issue and there are multiple such issues reported on metalink. You can look at the issues for potential solutions!
https://support.oracle.com/CSP/main/article?cmd=show&id=659033.1&type=NOT
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=857761.1
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PROBLEM&id=961924.1

Apple Mail, is there a way to change the default time-out?

This has been puzzling me for some time and I have not found a solution. The problem which I also posted in the Mail forum (though I think that if there is a positive answer it will come through here) is as follows:
I have an email account with on my company's mail server which is actually a Novell Netware server with a POP3 service. When using mail to send mail, I have no problems. When using mail to recieve mail, well, sometimes it gets the mail, and sometimes it does not. Usually, I can recieve mail for two or three weeks then it just stops working. No changes to my system, no updates or anything, I recieve email at one point in the day and then 15 minutes later - nothing. In the Activity Monitor, I see "Connecting to ..." then "Sending Password" then "Checking for Messages", then (after a while) it beeps as if it did not find any messages to download (no error!).
Some weeks later, after suffering with webmail, suddenly, it works again. This usually coincides with maintenance on the server, but not always. It also seems to correspond with a general improvement of the server performance. But eventually, the cycle starts over again with mail suddenly not able to find any new messages for that account.
I use dial-up at home, ethernet LAN at work, and DSL at our satellite offices. When it works on one it works on all. Also note that my other email accounts (not in any way connected to my company) work as they should at all times and in each setting.
Is it possible that mail simply times out before the messages are discovered. The Novell server used for mail is by no means known for its performance. If so, is there anyway to change the default timeout in mail for "Checking for Messages"?
Things I have tried:
I have dumped the "MessageUidsAlreadyDownloaded" and "MessageUidsAlreadyDownloaded2" files to no avail.
I have changed computers (I recently upgraded from a ti400), reinstalled the OS, upgraded from 10.2.8 to 10.3.x to 10.4.3, and removed and recreated the mail account (multiple times), all to no avail.
Based on the above observations, I feel that it may be that "Mail's" "Get-mail" function is timing out before new messages are discovered on a very slow server. Is there any way to change the default time-out to evaluate this hypothesis?
Any help would be appreciated.
Kraig

I already thought of that one. I deleted my account from there. But it didn't default to the other one. It just told me I needed to add an account. Thanks tho

ICal all-day event default time error

Searched this discussion and others but no help there. When I create an all-day event in iCal (time zone support on, set to America/Los Angeles)it reads as Casablanca, Monrovia when synced to Entourage. Due to corp policy I'm sync'ing with Outlook Exchange server via Entourage, sync'ing Entourage with iCal, iCal with MobileMe and MobileMe with iPhone. All works just fine in regular events ... only all-day events have this incorrect default time zone.
Any ideas?

I have the same problem. All day events created in iCal sync to the Exchange server as Casablanca time zone, which I believe is the same as GMT. Events created in Entourage sync without error. Most events created on a PC with Outlook sync fine all the way through to iCal. This seemed to start about the same time as your post, ie sometime around November. Prior to some time in the fall, all day events sync'd properly. I've posted this topic to the mactopia entourage forum but I haven't gotten a response there yet.
I'm using iCal 3.0.6, Entourage 2004 11.4.0, Mac OS 10.5.6. Any thoughts anyone? Apple?

How to specify finite simulation stop time in VI generated using SIT connection manager

Hello,
I have a SIMULINK model which I want to run on a desktop ETS. I'm following this procedure:
1. Convert the SIMULINK model in a .DLL using RTW build in Matlab. The target of this build is nidll.tlc.
2. Create a host VI with required indicators and map the parameters using SIT connection manager.
3. Configure the DAQ (and then SIT connection manager generated the driver and IO files for me.)
4. Using LV project, run the driver on the desktop ETS and host VI on the host machine.
The code is working fine, without any error.
My question is this: Since in the driver VI, the simulation time is set to -1, which implies "continuous", the simulation goes on until I hit the stop button on the host VI.
I tried changing this default value to some other value. The simulation then does run for the defined amount of time but then I'm getting error 2206.
What is an appropriate way to stop the simulation on the RT target?
Thanks
Gayatri
PS: I'm using LV 8.5, LVRT 8.5, SIT 4.0, Matlab @2007a.

The VI in the Driver VI called SIT Initialize Model.vi has an input called time step (sec) (-1: use model time step) which does what you want it to. It doesn't actually affect the time step of the solver used in the built model DLL, just the rate at which the main base rate loop actually runs in real time. In fact, base rate loop period would be a better name for this control. If you set it, you won't alter your model, but you will be able to adjust the rate of the base rate loop.
Simply create a control from this input terminal on your driver VI and fill in an appropriate period in seconds. Make sure to set this value as default in the control so that the Driver VI remembers it.
You will have to take into account that your model will still think it's running at the time step it was compiled at. So your model simulation time and the actual wall clock time won't match up.
Jarrod S.
National Instruments

Can't adjust the default time scale when creating a new appointment in Outlook 2010

Good Afternoon, I have found a question on these community boards that propose an issue that I am currently experiencing. The answer; however, was not the solution for me. I used the same name as the original post and will add the original text as it is
exactly what I am experiencing.
"When creating a new appointment in the month view Outlook 2010, the default time scale or duration is 2 days. I tried resetting the view, adjusting the time scale, and creating a new profile. It only seems to happen when creating the appointment
in the Month view. ??? Day and week view work fine and appointment can be created w the standard 30 minute time scale. But the time scale in the month view although says 30 mins, it creates appointments in 2 day durations."
This is exactly what happens to the user I am assisting. When in "month view" double clicking the day will bring up a new appointment with the times within the same day. If you click the "new appointment" button in the ribbon it
sets the end time to the following day. This only happens in the month view every other view works as it normally should. I have tried it several times being sure multiple days are not selected. It still gives me an end time for the following day. I have reset
the view, changed the time scale but nothing seems to bring it back to the default same day appointment. Any ideas?
Thanks for any assistance you can provide.

It is a default in Outlook 2010 in month view. The "time scale" selection is greyed out. Very frustrating. Everytime I select "New Appointment," a duration of 1 day is automatically selected; midnight to midnight. I end up doing
most appointments twice because I forget to change to end date back to the day of the appointment. "New meeting Request" works fine. So does "New All Day Event" when you deselect "All Day Event." I can't see how this default behavior
provides optimal results under any circumstances. Very frustrating.

How to change System Key Board Default input language(registry entry) using c# code

Hi All
Please help me to write a small console application which helps to change keyBoard default input language in registry using c# code (Manually we can change as follows: Control Panel\All Control Panel Items\Region and Language\ KeyBoards and languages\Change
KeyBoards\Default Input Language)
Note: once system rebooted, English language should not be selected by default. Previously selected language has to be retained after system rebooting

Hi
Avatar
Would you mind letting us know the result of the suggestion?
I temporarily mark
cedric’s last response as an answer. You can unmark
it if they provide no help.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Default "time spot" for vendor in PO

Hi,
Is there a way to have a default "Time spot" for a vendor when creating PO?
I want vendor X to deliver the goods in the morning and vendor Y at noon, for example.
I will send this data via EDI to vendor with all other data of PO.
tnx,
Lior

What about using texts?
You can maintain the texts , if they are vendor specific, in vendor master and get it copied to PO header text.

Default time for new event is always 15 min b4...

I think Ical is great and i use it daily to help me with my biz to stay on top of calls i need to make.
I am constantly adding new events and i always want my new events to open with a default time of "0" rather than "15 minutes before". It is very tedious to constantly have to change this every time I make a new event.
I also would hope to do the same thing with the alarm default feature so that I can change the default setting from "none" to "open file" since I always set alarms on all my new events this way. I am sure other ppl have the same problem if this ical a lot and would love to know how to tweak this or fix this in an update.
Apple if there is (or isn't) a way to fix this then plz tell me so instead of ignoring this post as I noticed a similar post someone else made has been ignored,
TY
ERIC

Bump. I'd like to know this as well. I don't see a preference for this in com.apple.iCal.plist
9AM every day would be perfect as a default

Default Device Admin (Tacacs+)

ACS 5.1
Default Device Admin
Identity:
Single Result (internal list and AD1)
Group Mapping:
Rule1:(anyone in AD/Administrators=Group/AdminGroup)
Default: Standard user
Authorization:
Rule1: (anyone in Group/AdminGroup, permit all commands)
Default: Deny All Commands
Here's my situation:
User1 (AD/Administrator)
UserBob (NOT in AD/Administrator)
User1 Logs into a switch, types "enable" is asked to authenticate again, and can then run all commands (this is what i'm looking for, though i dislike the second login)
UserBob Logs into a switch, types "enable" is asked to authenticate again, but gets error "% Error in Authentication" (i do not want UserBob to even be able to log into the switch to begin with)
So my question is:
How do i keep UserBob from being able to log into the switch?
How do I get User1 to enter level 15 (Switch# instead of Switch>) automatically without being prompted to enter their password a second time after typing "enable"?
As i understand it, "Default Device Admin" is different than "Default Network Access" which i liken to "logging into switches" vs. "authenticating against VPN server or Wireless" respectively. So i should be able to restrict users from logging into switches, but still allow them to authenticate for access to things like VPN, so i don't think what i'm asking above will keep me from being able to do that.
Ideas?

Hello
Q1 : How do i keep UserBob from being able to log into the switch?
     Configure NAR [network access restriction] and restrict the user to "not-to" access switch.
Q2 : How do I get User1 to enter level 15 (Switch# instead of Switch>) automatically without being prompted to enter their password a second time after typing "enable"?
     You need to configure exec authorization on switch and push "privlege level = 15" to make User1 fall on switch# mode.
The command on switch will be :
     aaa authorization exec default group tacacs local
Let me know if it helps.
thanks
Devashree

Design advice for setting users default time

I have an application that in a number of different places requires that records when being updated or created are shown to default to the user's current date. Depending on the location of the user, this could be a different day than where the server is.
All of the relevant fields in the database tables are using a datatype of "TIMESTAMP WITH TIMEZONE". When a users account is initially created, the timezone that the user is in is saved. When the user logs on, an "alter session set time_zone" command runs on the database to change the time zone of the current session.
When a user updates or creates a record and one of the field(s) requires to display the current date of the user, I call a ViewObject which runs a query to "select current_timestamp from dual" to return the current date from the database and populate the field with this.
I've realised that I'm creating a considerable overhead as this view object may be queried dozens of times during a users session and was thinking of running it once when the user logs on and storing the "USER_DATE" as a session variable - then I can simply refer to this each time, instead of many round-trips off to the database. Obviously there is a risk if the user logs on just before midnight and stays on until after that the date will be incorrect but this is extremely unlikely as the application is only used during normal business hours up to 9pm as an exception
Am I heading down the right track here or doing something daft (and missing something far more simple that I should be doing !)
Cheers,
Brent

Hi Frank,
Thanks for that - after 8 years of working with Oracle Forms and afterwards the same again with ADF, I still find it hard sometimes when using ADF to understand the best approach to a particular problem - there is so many different ways of doing things/where to put the code/how to call it etc... ! Things seemed so much simplier back in the Forms days !
Chandra - thanks for the information but this doesn't suit my requirements - I originally went down that path thinking/expecting it to be the holy grail but ran into all sorts of problems as it means that the dates are always being converted into users timezone regardless of whether or not they are creating the transaction or viewing an earlier one. I need the correct "date" to be stored in the database when a user creates/updates a record (for example in California) and this needs to be preserved for other users in different timezones. For example, when a management user in London views that record, the date has got to remain the date that the user entered, and not what the date was in London at the time (eg user entered 14th Feb (23:00) - when London user views it, it must still say 14th Feb even though it was the 15th in London at the time). Global settings like you are using in the adf-config file made this difficult. This is why I went back to stripping all timezone settings back out of the ADF application and relied on database session timezones instead - and when displaying a default date to the user, use the timestamp from the database to ensure the users "date" is displayed.
Cheers,
Brent

Firefox 6.0 crashes every time I try to use it. Does not run at all.

My firefox recently upgraded to 6.0. As of the upgrade, I have completely lost any ability to use the software. I get a crash error message EVERY TIME I try to use firefox now. Please help me get away from IE.

-> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications(softwares) before Starting to Run Scans.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Windows Defender Home Page - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free - http://www.lavasoft.com/products/ad_aware_free.php
There are also specialized forums for Malware Removal such as those listed below, where you might be able to get more help:
* Bleeping Computer Forums - http://www.bleepingcomputer.com/forums/
* Spyware Warrior Forums - http://www.spywarewarrior.com/index.php
* SWI Forums - http://www.spywareinfoforum.com/
Check and tell if its working.

Default Time Admin in IT0001 using OM Relationships

Similar Messages

Maybe you are looking for