Default values for data types
what are default values for all the data types that exist in abap
Title was edited by:
Alvaro Tejada Galindo
Hi
For CHAR data type default is SPACE
for INTEGER,PACK and FLOAT types it is ZERO '0'
for NUMERIC also so many Zeros
for Time(TIMS) it is 6 zeros and Date(DATS) it is 8 zeros
Regards
Anji
Message was edited by:
Anji Reddy Vangala
Similar Messages
-
SRM 4.0- How to set the default values for product type (01) only for SC
The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF -
Hi experts,
I want to set default value for dates..
My screen has : date_from & date_to.
date_to : will be current date(today's date) if Eg: 27.08.2007 (here i used NOW())
then date_from must be 01.06.2007 (3 months logic)
similarly : if date_to is 01.01.2007
then date_from must be 01.11.2006
kindly help...
Thanks a lot!!!
Regards,
BijalHi Bijal
(DGET(NOW(),'D'))-1) returns number which is 0 incase of 01.08.2007, so DADD(NOW(),-0,'D') is again ideally same day 01.08.2007 .
So, DADD(DADD(NOW(),-0,'D'),-2,'M') should give you 01.06.2007.
<b> IT WORKS!!! -
I have tested it now.</b>
Please check and revert.
The IF formula which sent actually returns String, so use DVAL(IF(DGET(NOW(),'D')!=1,DADD(DADD(NOW(),-((DGET(NOW(),'D'))-1),'D'),-2,'M'),DADD(NOW(),-2,'M')))
Message was edited by:
Navneet Giria -
Set default value for product type
I want to set default value in product type drop down box
in component PRD01QR.
view SearchHelp.
I tried with setter and getter , but not working
they are using query string.Hi,
You can achieve this by redefining the method GET_VH_PRODUCT_TYPE() in IMPL class of searchHelp view. Just copy paste the implementation of this method from super class and now control the internal table as per your requirement like
comment out the line APPEND INITIAL LINE TO lt_ddlb. (line no: 47)
as it will add an empty line at the starting of internal of product type values which you dont want. In you case there should be some default value for product type field, so arrange the inetrnal table values according to you requirement and what ever value you want to default for product type that should be the first value in the drop down without empty line and add an empty line at the end of the internal table.
No need to call super->GET_VH_PRODUCT_TYPE() in your implementation as you have written all the required code in your implemenation itself.
Hope this would help you!
Regards,
Ajay -
How to set default value to date type attribute.
Hi,
How to set default value to date type attribute.
E.g I want to set u201C01/01/1999u201D to date attributes.
First i want to set value and then i want to fetch the same & want to check equals.
please suggest solution.
Regards,
SmitaHi,
In wdinit() method u can set the date
DateFormat df = new SimpleDateFormat("MM/dd/yyyy");
Date today = Calendar.getInstance().getTime();
String reportDate = df.format(today);
wdContext.currentContextElement().setFromDate(reportDate);
Another way you have set the this formate like that
1. Create a Simple type under "Dictionaries->SimpleType" called DateFormat
2. Select the type as "date"
3. Go to the "Representation" tab and set the format as "dd/MM/yyyy" (or whatever u want, but month should be MM)
4.Bind the context attribute to the type created now.
Hope this helps u.
Best Regards
Vijay K -
Define Default Values for Doc type..
Hi All.
I set a default value of "ME21N" TO "S21" at Define Default Values for Document Type.
But, default document type is not "S21" but "NB" in ME21N
( system ver. 710)
Let me know how to correct it..
Thank you in advance.
regards..
namHi,
Could u please confirm whether have u created the document type
in
IMG...>MM.....>Purchasing.....>Purchase order...>Define Document Types.
if not please do it.
and then create the pO.
I think it will work
Regards
Aasif -
[Access 2010] Change default formats for data types
Whenever I import data, the default format for Boolean data types is "-1,0." I know how to subsequently change this format to "Yes/No," but I'd like to change the default
setting to "Yes/No." Is this possible?
Thanks in advance.Hi,
I found you post the same question in other place and got the advice. I agree with Mr. Kees suggestion. The data type is a build-in default setting with Access, we can't change it. We may try the workaround via VBA to test.
http://forums.cnet.com/7723-6129_102-627633/access-2010-change-default-formats-for-data-types/#message5617496
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Have a good time.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Default Value for Order Type based on Company Code in ME21N
Hi,
Using ME21N, I want to make the PO type defaulted to a certain company code, say for instance Company code XYZ should have a PO type XYZ Purchase Order, ..company ABC should have a PO type ABC Purchase Order, and so on...I'm just puzzled how to implement it. I know that we can set a Default value for PO Headers in Personal Settings but its doesnt give the result I want coz it will only have one Default Value. What I wanted is when a certain company code is chosen, automatically, the corresponding PO type for that Company code will be displayed in the Order Type drop-down menu (so there's no need to choose on the drop down list what Order type) Is this possible in ABAP? Hope i made myself clear.
Thanks in Advance.Use BADI IF IF_EX_ME_PROCESS_PO_CUST - method OPEN
View the interface documentation in transaction SE19 and you will see the method OPEN can be used :
2. Opening of a purchase order (OPEN method)
The system opens a new document to create, change or display a purchase order. With the OPEN method,
<b>you can import your own data and prepare it for further processing.</b>
This is available in 4.7 Enterprise but not sure how far back.....
hope this helps
Colin. -
Set default value for date/time to previous month
Hi All
I have two date/time parameters in my report and I want to set the default value for both the parameters
For start date parameter I want the first date of previous month and for end date parameter I want the last date of previous month.
Can someone please point me to the right direction
Thanks
RoneHi Rone,
These links can be helpful for you:
http://www.bidn.com/blogs/hardikabhavsar/bidn-blog/1639/default-date-parameters-in-ssrs
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/584a98ae-bb75-4740-9198-e6be3c1aec12/
Regards,
Manoj
*Happy to help
http://experiencingmsbi.blogspot.com/ -
How to make default values for date range?
Dear Colleagues,
My customer is asking for a default value for a date range prompt.
The FromDate should contain the 1st of current month, the ToDate should contain current date.
Does anyone have any idea how I can meet this demand?
Regards SiljeHi Federico,
Thank you for the answer, we are back to the challenge after summer vacations!
I have created a variable in the universe: SELECT current date as TODAY FROM SYSIBM.SYSDUMMY1. I Called it TODAY.
Then I created a prompt in the query based on Date. In Prompt Properties I tagged for "Set Default Values" and I typed in TODAY.
When I try to run the query I get the error message: The date for the query filter based on 'Date' is invalid (WIS10704).
What is wrong? What do I have to do differently?
My goal is to have a default for Date that gives me today..
Regards Silje -
Multiple default values for Selection type variable
Hi all,
I am using Bex 3.5. I have a fundamental doubt while creating a User Entry, Selection Option, Optional type variable. I am trying to include multiple single variables in the default section, but it accepts only one. Is it possible to add multiple default values to the variable so that they show up in the selection screen when we run the report via Bex Analyzer ?
Thanks for the inputs !
Regards
Snehith.Hi,
In one of my bi7 reports, i remember i have given multiple default values in a single variable. For example i wanted to have multiple material types in my selection screen.
But i have to check out the type of that user entry variable.
Hope the above reply was helpful.
Kind regards,
Ashutosh singh -
Default value for date parameters
Hi,
There are several reports that have from_date/to_date parameters where the default value is, e.g. 01/01/2012 and 31/12/2012.
Every year, after the previous year is closed, I go through the process of having to change the default values to the new year in all the reports. I have checked but not found an option of using a formula for a default value in a parameter. Could there have been something new recently that I missed?
Or does anyone have a suggestion of a way to get around it? I have tried in the past trying to extract the year from sysdate, but have not succeeded in getting a formula that the Discoverer accepts in the default value.
Thanks.
LeahThanks for the information. I doubt that my boss would go for it but I will speak to him when I am at work next week. We have some old reports which have a default value of null and that would most probably be confusing for many of the users. Is there a way to have the default the end of the year also?
Once again, thank you.
Leah -
What is the default value whe data type is numaric
dear
can you tell me the defult value of the coloum when we set it to numaric
i want to pull the data from the table using blank or default valu in that colum
i had done the following qry
SELECT T2.[U_NoofSpl] FROM [dbo].[@MINSPL] T0 INNER JOIN [dbo].[@SPLPLAN] T1 ON T0.Code=T1.U_BasCode INNER JOIN [dbo].[@SPLPANRF] T2 ON T1.Code = T2.Code
WHERE T0.[U_ItemCode]='CON00001' AND
T2.[U_QtyTo]='' *
here i want to set the valu like = 0 or ''
thanks in advanceHi Kishor,
Try This....
SELECT T2.[U_NoofSpl] FROM [dbo].[@MINSPL] T0 INNER JOIN [dbo].[@SPLPLAN] T1 ON T0.Code=T1.U_BasCode INNER JOIN [dbo].[@SPLPANRF] T2 ON T1.Code = T2.Code
WHERE T0.[U_ItemCode]='CON00001' AND
T2.[U_QtyTo]=0
or
SELECT T2.[U_NoofSpl] FROM [dbo].[@MINSPL] T0 INNER JOIN [dbo].[@SPLPLAN] T1 ON T0.Code=T1.U_BasCode INNER JOIN [dbo].[@SPLPANRF] T2 ON T1.Code = T2.Code
WHERE T0.[U_ItemCode]='CON00001' AND
T2.[U_QtyTo]=Null
Thanks
Shafi
Edited by: shafi_sunshine on Aug 23, 2011 1:44 PM -
Set Default Value for a Date Navigator
Hi all
Is it possible to set a default value for a date navigator.I mean with out picking the date from the Navigator, on load of the view itself i need a particualr date to be displayed (say 12/31/2000).
Thanks in advanceHi,
create a value attribute of type date bind to the input field and in wdInit()of view controller write this code..
wdContext.currentContextElement().setValueAttrName(new Date(Calendar.getInstance().getTimeInMillis()));
means ...
u r setting the date entered into some context ....
type of that attribute must be of date and for initial value write the above code ..if it is under node element create nodeelement bind it to context and write the code accordingly..
Message was edited by: Yashpal Gupta -
How to set the Default values for Info Objects in Data Selection of InfoPac
Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CVHi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha
Maybe you are looking for
-
HT202213 what steps do I need to set up a new pc with my existing itunes library?
I just purchased a new PC. I have itunes set up on my old PC. How can I bring iTunes into my new pc? Do I need to start with installing/downloading iTunes and then transfer over the libraries?
-
Can't start iPhoto, what to do?
I can't start iPhoto. Even when I start the computer again. What can I do about it? Annie
-
hello, i'm using l.r 3 and p.s cs4 and when i finished working on ,y image in l.r i wanted to countinue and edit it in p.s ones p.s opend it it was in diffrent colores and espceally in the hair area as you can see it smargesd this gray colorer over t
-
[solved] SPDIF times out
Hi, I've connected my PC to a receiver using spdif / iec958 / toslink, which works fine. Except after a few seconds of silence the entire link is powered down which produces an irritating popping sound. Also, there is a small delay before I can hear
-
Saved Slideshow won't open in iDVD 6
In iPhoto 6 I made a saved slideshow of 83 of my photos. I then also made another saved slideshow of the exact same photos but clicking that I wanted to repeat the slideshow. I then clicked on each slideshow individually and clicked "send to iDVD". A