Default workflow admin user configuration in weblogic

Hi,
When the BPEL workflow could not find the assigned group in weblogic, it is assigning it to some user testadmin (in my case).
Where to find this configuration ? I would like to change it to some other user.
Any thoughts are appreciated.
Thanks
Sai

Hi Sai,
are you referring to the error asignee?
http://docs.oracle.com/cd/E14571_01/integration.1111/e10224/bp_hwfmodel.htm#BABEHIHB
best regards Nicolas

Similar Messages

Default ldap Admin user

Hi,
We are using ldap for creating oracle retail store inventory management users and creating store as well.
I need to know that where can i find ldap admin user and what is the default ldap admin user after installing ldap ?
Thanks
Edited by: user11969485 on Jun 28, 2011 3:23 AM

Hello,
You can look at the list of forums at:
http://forums.oracle.com/forums/main.jspa?categoryID=84
(the link is at the top left of this forum as well)
and locate the one that looks like the best fit for your question.
Thank you,
Sandra

Create an Admin user to login Oracle BPM worklist

Hi All,
I want to create an admin user same as weblogic to login Oracle BPM worklist application. Can any one tell me how to create an admin user to login BPM worklist
Regards,
Kiran

Hi,
I am able to login into the BPM worklist with weblogic & xelsysadm. But when i click on a approval task its redirecting to small pop-up with OIM login page again and after providing the credentials still its showing login page.
What is the reason for that.
I have done few changes in OIM weblogic console for OAM IdentityAsserter and OUDauthenticator to login to BPM worklist. For both I made control-flag as sufficient and /integration i kept in the excluded state in the OAM console.
Any help is appreciated
Regards,
Kiran

Error while configuring external LDAP user store with weblogic

Hi,
I have weblogic 10.3 installed and I can access weblogic admin console using weblogic (admin) user. I want to use external ldap user store to access admin console with users present in external ldap.
To do this, I have configured authentication provider and provided all the required details to connect to ldap.
For example:
Base DN: cn=admin,cn=Administrators,cn=dscc (user with which we will connect to LDAP)
User DN: ou=People,dc=test,dc=com
Group DN: ou=Groups,dc=test,dc=com
This authentication provider is set to SUFFICIENT mode. I have deleted the default authentication provider.
In the boot.properties file I have given the user name and password of the user with which LDAP instance was created something like below.
password=xxxxxxx
username=admin
Now while starting the admin weblogic server, I am getting the below error:
<Jul 25, 2012 2:22:28 PM IOT> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Jul 25, 2012 2:22:28 PM IOT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:960)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User admin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User admin denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Jul 25, 2012 2:22:28 PM IOT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jul 25, 2012 2:22:28 PM IOT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jul 25, 2012 2:22:28 PM IOT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Can anyone please suggest how to resolve this problem? If, anyone can suggest the exact steps to configure external ldap store to manage admin console via ldap users.
Regards,
Neeraj Tati.

Hi,
Please refer the below content that I found for Oracle 11g in the docs.
"If an LDAP Authentication provider is the only configured Authentication provider for a security realm, you must have the Admin role to boot WebLogic Server and use a user or group in the LDAP directory. Do one of the following in the LDAP directory:
By default in WebLogic Server, the Admin role includes the Administrators group. Create an Administrators group in the LDAP directory, if one does not already exist. Make sure the LDAP user who will boot WebLogic Server is included in the group.
The Active Directory LDAP directory has a default group called Administrators. Add the user who will be booting WebLogic Server to the Administrators group and define Group Base Distinguished Name (DN) so that the Administrators group is found.
If you do not want to create an Administrators group in the LDAP directory (for example, because the LDAP directory uses the Administrators group for a different purpose), create a new group (or use an existing group) in the LDAP directory and include the user from which you want to boot WebLogic Server in that group. In the WebLogic Administration Console, assign that group the Admin role."
Now in my LDAP directory, setup is in such a way that Administrators is a group created under following heirarchy " cn=Administrators,ou=Groups,dc=test,dc=com" and there is one user added in this Administrators group.
The problem that I am having is when I modify the Admin role in which Administrators group should be added what exaclty I should give in Admin role. Whether I should give only Administrators or full DN: cn=Administrators,ou=Groups,dc=test,dc=com ???
When i give full DN, it takes every attribute as different, i mean cn=Administrators as different and ou=Groups as different and shows a message that cn=Administrators does not exist.
Here not sure what to do.
Also if external ldap authentication provider is the only provider then I need to give the user information in boot.properties file also for weblogic to boot properly. Now, what should I give there in user? still complete DN ??
Regards,
Neeraj Tati.

How to configure User domain in Weblogic..........

How to configure User domain in Weblogic Application Server 8.1 from Command prompt on windows Xp?
Thanks in Advance.


You can use WLST or weblogic.Admin command. WLST is the recommended appraoch. Here are a few links for both of the above:


http://edocs.bea.com/wls/docs81/admin_ref/cli.html
http://e-docs.bea.com/wls/docs91/config_scripting/using_WLST.html
http://edocs.bea.com/wls/docs90/config_scripting/domains.html
http://dev2dev.bea.com/blog/hoos/archive/2005/09/what_no_wlst_1.html
http://dev2dev.bea.com/pub/a/2005/01/wlst_offline.html
http://dev2dev.bea.com/blog/hoos/archive/2005/10/environment_pro_1.html


Hussein Badakhchani
London Middleware

Edited by hoos at 01/07/2007 3:50 AM
Edited by hoos at 01/07/2007 3:51 AM

Changing the weblogic admin user password

I have faced an issue in reseting weblogic admin user password. Following are the steps i have executed in sequence.please help to understand why it is not working this way
I have 2 managed instances running on two separate computers.
`Step 1.` shutdown the admin server instance ( i did not shutdown the node manager and other 2 manage server instances
`Step 2.` Set the environment variables
`cd $DOMAIN_HOME/bin`
. ./setDomainEnv.sh
`Step 3.` then executed the command below to create the new password
cd ../security
mv DefaultAuthenticatorInit.ldift oldDefaultAuthenticator
java weblogic.security.utils.AdminAccount weblogic new_password .
`Step 4.` backed up existing `boot.properties` file and created a new file. Also backed up data directory of admin server. created a new `boot.properties` file with following configuration
with plain text username(weblogic_admin) and password (new_password).
cd ../servers/AdminServer
mv data data_old
cd security/
mv boot.properties oldboot.properties
Step 5. Then i restarted the admin server. admin server is restarted successfully and i was able to login the admin console with my new username and password. Issue came when i try to shoutdown the admin server. when i execute sh stopWeblogicAdmin.sh , it will through following exception. But , if i kill the admin server process , then i am able to start the admin server with out any problem. and i am able to login to the server also. I am also able to stop and start manage server instances through admin console. But why it is failing only when i try to stop.could anybody help me on this
Stopping Weblogic Server...
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://jipsl13t:12001 with userid weblogic_admin ...
This Exception occurred at Fri Jan 18 12:20:09 GMT-00:00 2013.
javax.naming.AuthenticationException [Root exception is java.lang.SecurityException: User: weblogic_admin, failed to be authenticated.]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:42)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:682)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:469)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:313)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:61)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:147)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyObject.invoke(Unknown Source)
at org.python.pycode._pyx4.connect$1(<iostream>:16)
at org.python.pycode._pyx4.call_function(<iostream>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx15.f$0(/product/jip/jipsl11t/wls/eni132_domain/shutdown.py:6)
at org.python.pycode._pyx15.call_function(/product/tsm/jipsl11t/wls/eni132_domain/shutdown.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.util.PythonInterpreter.execfile(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: java.lang.SecurityException: User: weblogic_admin, failed to be authenticated.
at weblogic.common.internal.RMIBootServiceImpl.authenticate(RMIBootServiceImpl.java:116)
at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Problem invoking WLST - Traceback (innermost last):
File "/product/jip/jipsl11t/wls/eni132_domain/shutdown.py", line 6, in ?
File "<iostream>", line 22, in connect
File "<iostream>", line 646, in raiseWLSTException
WLSTException: Error occured while performing connect : User: weblogic_admin, failed to be authenticated.
Use dumpStack() to view the full stacktrace
Done
Stopping Derby Server...
Edited by: user8643895 on Jan 18, 2013 9:28 AM

Hi,
This issue was occurring because stopWebLogic.sh was picking the username and password from properties user config files in user's home directory: username-WebLogicConfig.properties, username-WebLogicKey.properties.
If the credentials for weblogic server are changed then new user config files should be created, if these are not created then stopWebLogic.sh will pick up the old credentials and hence fail.
Please refer the following document for information on user configuration files:
http://docs.oracle.com/cd/E21764_01/web.1111/e13813/reference.htm#WLSTC430
Connecting to the server after deleting username-WebLogicConfig.properties, username-WebLogicKey.properties resolves the issue as it forces the script to use the credentials provided by the user while running stopWebLogic.sh
There are two ways you can resolve this issue:
1) Create new user config files with the correct credentials as explained in the following document:
http://docs.oracle.com/cd/E21764_01/web.1111/e13813/reference.htm#WLSTC430
Or
2) To force the stopWeblogic.sh script to use credentials provided by the user while running the script follow these steps:
In the stopWeblogic.sh file use the following connect command:
connect(userConfigFile='',userKeyFile='', url='${ADMIN_URL}', adminServerName='${SERVER_NAME}')instead of:
connect(${userID} ${password} url='${ADMIN_URL}', adminServerName='${SERVER_NAME}')Hence in the stopWebLogic.sh script replace:
echo "import os" >"shutdown.py"
echo "if os.environ.has_key('wlsUserID'):" >>"shutdown.py"
echo " wlsUserID = os.environ['wlsUserID']" >>"shutdown.py"
echo "if os.environ.has_key('wlsPassword'):" >>"shutdown.py"
echo " wlsPassword = os.environ['wlsPassword']" >>"shutdown.py"
echo "connect(${userID} ${password} url='${ADMIN_URL}', adminServerName='${SERVER_NAME}')" >>"shutdown.py"
echo "shutdown('${SERVER_NAME}','Server')" >>"shutdown.py"
echo "exit()" >>"shutdown.py"with:
echo "import os" >"shutdown.py"
echo "if os.environ.has_key('wlsUserID'):" >>"shutdown.py"
echo " wlsUserID = os.environ['wlsUserID']" >>"shutdown.py"
echo "if os.environ.has_key('wlsPassword'):" >>"shutdown.py"
echo " wlsPassword = os.environ['wlsPassword']" >>"shutdown.py"
echo "connect(userConfigFile='',userKeyFile='', url='${ADMIN_URL}', adminServerName='${SERVER_NAME}')" >>"shutdown.py"
echo "shutdown('${SERVER_NAME}','Server')" >>"shutdown.py"
echo "exit()" >>"shutdown.py"
Regards,
Kishore

Configuring Photoshop CS5 to open in 32bit by default for multiple users

I've set up a lab with Photoshop CS5 installed on 60 macs which will be logged on by 1200 domain users and I need Photoshop to open in 32bit mode as default for each user so it will be compatible with our printer. Rather than having to administer PS manually to 32 bit for each user, would I be right in thinking I could create one copy of the Photoshop app set to open in 32bit mode and then copy it to all the other macs to replace the original 64bit configured versions so they would all open in 32bit by default for all users?
Anyone know if this might work or if there is an alternative way?
Thanks for any advice

I was off the mark with this but found the solution. I was informed the preference file to launch in 32 or 64 bit mode is the com.apple.LaunchServices.plist which resides in the user preferences folder. So by configuring the Photoshop app via 'Get Info' to 32bit and copying this out to another users prefs folder then PS opens in 32 bit for that user as well. To get this to work for all users on login I created an automator workflow and dropped it in the App folder of every mac and this is triggered by running it as a login-in items in the computer group in workgroup Manager.

Default users configured with Webcenter Sites 11gR1 Jump Start Kit

Hi All,
I have installed Webcenter Sites 11gR1 Jump Start Kit. I want to use James Email Server that is shipped with the JSK and I am not sure of what default users have been configured with the JSK.
Does anyone know what are the default users configured for James Server?
Thanks in Advance,
Hari

Hi Hari,
The default admin user fwadmin should be the default for mail server also. Configuring users explicitly for mail server is not possible. To use mail server the below said properties must have values.
cs.emailaccount-- The account used to send mail
cs.emailhost--mail server host exe:localhost:25
cs.emailpassword--password for above said mail account
cs.emailcharset and cs.emailcontenttype properties are optional. These properties are found in futuretense.ini
Thanks,
Harish

We have non admin users on Windows 7. They change the homepage and it works for that session. When they close the browser, and restart it again the default homepage is shown.

Windows 7 Sp3. Using Firefox 7.01
Non admin users.
Can change homepage to whatever they like and it will work.
BUT when they close firefox and open it again the home page goes back to default setting

Update.
This looks to be a mozilla.cfg setting. If I take out the pref("browser.startup.homepage","ourwebpage");
it loads the basic firefox "FirstPage"
How do I get around adding a default homepage that can be changed by the user?
I have tried adding
defaultPref.. .. then the webpage info.. BUT it retrurns a Failed to read the configuration file. Please contact your system administrator.
Do I need to create a prefs.js file?
And if I do how do I get it to work for each new user that logs into that machine?

Weblogic admin user password change w/o disrupting existing users

Hi Folks,
As a business policy we need to change the password of the admin user in weblogic after a cycle of specific period.
Please let us now how can we do that without losing the other existing users in 'my realm.'
I understand that we can use the weblogic.utils.security.AdminAcoount utility to give the new password, which will create a new DefaultAuthenticatorInit.ldift file in +<domain-home>/security+ folder (according to Doc ID 1082299.1).
The password will change but the users in 'my realm' will be lost. (there are many users and it is a production environment so recreation is out-of- question)
Is there a way we can retain the users and still proceed with the password change?
Cheers,
Jeegar

Hi Jeegar,
This can be doen by followin the standard procedure by login to console and navigate to :-
DOMAIN_STRUCTURE--->Security Realm--->myrealm--->Users and Groups---->User tab click on the user weblogic
--click on the password tab and put the new password there and save (password is changed for the user here)
---Logout from the console and login to the console again using the new password
But when the server starts it do not read the password for the user directly from the realm rather it picked the same from the $DOMAIN_HOME/servers/AdminServer/security/boot.properties
Now in order to make this change available when the server starts change the values for the username and password in boot.properties and specify them in plain-text and save the same.
Now next time whenever the server will start it will pick up the new values from the boot.properties and once the same had been accepted those will be encrypted again.
You might have to make the change for the boot.properties for all the Managed Server if you have the Managed Servers in the domain which will be located at the location $DOMAIN_HOME/servers/<<Managed Server Name>>/data/nodemanager/boot.properties
You can test the steps on some lower environment first and try the same in Critical environment once the testing goes successful.
Regards,
Vijay
Edited by: V Kumar on Oct 25, 2012 3:06 PM

Managed system configuration step 8: No Admin User Id provided for TS SID

Hello experts,
I face the following problem in step 8 of managed system configuration (Configure automatically, SolMan 7.1 SPS 3):
All Activities fail (except Activate services) with the following Details message:
No Admin User Id provided for TS <SID> (ABAP)
Any hint?
Thanks and best regards, Basti

Hi Sunny,
I don't find anything where I can provide the user information. It just uses the actual user (SOLMAN_ADMIN). Can you tell me where to provide the user for this step?
Managed system configuration -> step 8 Configure automatically -> SSO Setup
Thank you, Basti

What is the default admin user account login id and password in Windows 8?

Hi all,
The current admin acccount in Windows 8 system are changed to Standard and no other Admin account is available in the system.
What is the default admin user account login id and password in Windows 8?
Or
Is there way to change the User role for the account?
Please use Marked as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

I am able to login as a Normal user, can not login as administrator.Hence can not install any software or change my user settings or create a new user.
What is the default admin password. How can i reset it form my user account
C:\Users\Amit>net user Administrator
User name                    Administrator
Full Name
Comment                      Built-in account for administering the computer/domain
User's comment
Country/region code          000 (System Default)
Account active               No
Account expires              Never
Password last set            7/26/2012 12:57:03 PM
Password expires             Never
Password changeable          7/26/2012 12:57:03 PM
Password required            Yes
User may change password     Yes
Workstations allowed         All
Logon script
User profile
Home directory
Last logon                   9/16/2013 1:16:30 PM
Logon hours allowed          All
Local Group Memberships      *Administrators
Global Group memberships     *None
The command completed successfully.

OBIEE 11g:Restrict Admin user (Weblogic) to upload certain set of files

Hello All,
We are running OBIEE 11.1.1.7.1 on local machine. We have a requirement which should limit Weblogic (Admin user) to upload .exe, .bat, .dll file etc or any such unwanted file in catalog or should only be able to upload required files. I am struggling to achieve this.
Could any one help us in this?
We do not want to remove upload permission from Weblogic user.
Thanks in advance.
Regards,
Andy

its not possible to restrict only certain type of files. the only option you have is to take out upload privileges for weblogic user and then follow the manual process of copying the catalog items like opening the catalog manager(offline and online) and copy the required items as required,So in that you way you can restrict the copy of other extensions apart from .catalog
by the way may i know who is that person who want to upload the other extension files into catalog folder with Admin user? Because only couple of them will have access to weblogic user to be able to make or do any changes.

Default admin user can't open apps which other user can

hi all,
running os x 10.9.4, my default admin user account cannot open several apps (for this specific question i'll use room eq wizarz as an example). however, when i log out, and log in as another user (which also has admin privilages) the app opens and runs perfectly fine...
there are several other apps with which i'm haing the same issue...
any ideas?
thanks in advance.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Error - The user has no workflow Linkage. Configure workflow.

Hi All,
I am getting following error in transaction Users_gen.
'The user has no workflow linkage. Configure workflow'.
SAP note says, I need to run transaction BBP_CHECK_USERS and select repair level 2. I followed these instructions but still I am getting this error.
Any idea to resolve this.
Plese advice.
Thanks and Regards
Pras Durafe

Hi Pras,
you can get rid of this message: nothing important.
It just checks that the user has got a WF relationship: i.e. that there is a manager with the red hat in the org unit.
It should be a warning message, raised after a call of RH_GET_LEADING_POSITION during user check (BBPU_CHECK_EBP_USER), that should retrieves the user's manager.
If you display the long text of the error message, you should get:
Short Text
The user & has no workflow linkage. Configure workflow.
Diagnosis
The user has no workflow linkage. The relationship between position (S) and user (US) does not exist.
System response
In workflow configuration (table T77S0) you can set the indicator WFLOW/CRMUS to 'X'.
Procedure
You can set the indicator as follows:
1. Start transaction code SM30
2. Open table T77S0 (Maintain).
3. Create the following new entry:
Group: WFLOW
Semantic ID: CRMUS
4. Activate by setting the indicator to 'X'.
Important: This function is only available from Basis Release 6.1.
If you set an entry in T77S0 with WFLOW/CRMUS --> X, then this control is by-passed.
This control is brought by note 796742:
SRM 3.0 SP10
SRM 4.0 SP05
For one of my customers, I deleted this message, but I don't remember if I changed the code or if I changed the table entry...
Rgds
Christophe
PS: please reward points for helpfull answers

Default workflow admin user configuration in weblogic

Similar Messages

Maybe you are looking for