Define path in selection screen to write the output file to pres. server

Hi can anyone tell me how to declare a variable so that the user can specify his own path name in the selection screen to store the output file in the presentation server. and please tell me how to link up the output file to the selection screen specified path.
thanks in advance.

DATA: FILE_TAB TYPE STRING.
SELECTION-SCREEN BEGIN OF BLOCK B02 WITH FRAME TITLE TEXT-B02.
PARAMETERS:
           P_FILE TYPE RLGRAP-FILENAME OBLIGATORY LOWER CASE.
SELECTION-SCREEN END OF BLOCK B02.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM OPEN_FILE USING P_FILE.
FORM OPEN_FILE USING L_FILE.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    CHANGING
      FILE_NAME     = L_FILE
    EXCEPTIONS
      MASK_TOO_LONG = 1
      OTHERS        = 2.
IF SY-SUBRC <> 0.
    SY-MSGTY = 'I'.
    MESSAGE ID     SY-MSGID
            TYPE   SY-MSGTY
            NUMBER SY-MSGNO
            WITH   SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    STOP.
ENDIF.
ENDFORM.
FILE_TAB = P_FILE.
CALL FUNCTION 'GUI_DOWNLOAD'
*Complete the FM
Greetings,
Blag.

Similar Messages

Getting junk data in the output file in UNIX server due to UNICODE error.

Hi All,
I am working on an Upgradation project from 4.7 to mySAP ERP 2005.
IN 4.7 we are using
OPEN DATASET lv_filename FOR OUTPUT IN   BINARY MODE. and getting the file as required.
In ECC 6.0 for the same OPEN DATASET statement ,the output file in unix server has the junk data having the characters like #<##d9{y#+G9###T>j(##^# #K## #q### #####.
Pls help me in this issue to proceed further .
Thanks,
Chakradhar.

Hi Markus,
Below are the files data in both environments.
In ECC 6.0
001B2274001802007051                                 0 20070519CTLMEA      RPTIME00043900 #
###9##;c_5####Tj#y#.##'###u###<#<##d9{y#+##G9###T>j(###^###K####q##########C##dA4####ձ###x##
R[#!#J##ڢw###u#-C#'Qho#箐}j##w%##/#'ZhW##s###nи#ڻ>-J#####Ж#tP}##Hu#}Q7###Sh_###C4<3nqk##i l#
####{############Qns###;####p##{si##y##@##ϰ0####C###,###2ύ#j̾########Q#f####;)k>lO#5#n###ܼ#
####M##S##IM#z0#o##ԭ####!#V#9###ں#?s##[#####V&#˴s#&#56196;&#56590;[#l#s##뷢:#Զ{Ȥ&#55960;&#57086;M-##v@#########v#߲###s##
9Q##!#d#####`#############Lc####J#######%?######E#HV3#(#N####Wl####}S#O######zA[##m####u/7#T
##2#s##Q#umF]##Z###}##݂###a######z1#`#####됞-###Q#o#####Q###x#######7Z[##?#V#e##nI####O1=u[#
##p##Kj#####]#####/5#20{####Ӝ##x##A#?###xa##/<^#Rj䅥#######xI#+j#%###$##$######p=##V#Ԋ
#######k#K##yI#yI#!/)#y#z##-y######"/#eڵ##/############*###"/_##-##+##/#y9#####5#9/#yI#A#
###################J/yih=####u4i#K##t####ܞ######=##AX###J##z#####KC믔## /###G{#K#####
In 4.7
001B2274001802007051                                 0 20070519CTLMEA      RPTIME00043900
ãÔ?®zåÖ#Iï-_Î-ør7##*Ódöã ²äÐÁSjòä`ëÏ©"yÿï¾E#[µºEW#g#2éu##a±¸u~#ZäTéR¯F&o#C·¼åÈÝÁ%½ß´y6+##¿
íE#z!#â#ùG#>{#éJæ##jÅSM<±òxwÆüI¾jâ#µ#ù
íQ ÕÈ###dÝ#/«#ycãA¼#ø#7#¿#¼#íxãý#y«#o#â¡ùéËÖ_C¼½À4ðÀó#Ð8?qÊ#O½Î¿_##b#xjÛÓ#OÜ#×gÌ#×ós##
í¡ùh¿~ëÊÓü#ò#'¡#Á#â©#<áoú#'Ô®ü#»L»þ#y)hà#ç#Z[¡#'®Uy1?YC<Ýú#iÇÇ###Íç'Ô#§#Ù#O§#f<###B{#§##ñ
#0H}¬#^##6¨7V¨7VÚX#M9&#A#øG º'õxOù§ø #W¨Å+Ðb#ÉÇ7#SôRXß\u00A7à#wE"#mê#óÀd# ¼##gn###:ô#E<#######ú
ûJ¦H}#·¦Y½â>ºbò#xSSÿÿÕ«óG#ï#6²f´Ú¾fyqèhJÖçCOr´#Ý#S?##KËÄ×mâë¶x)º×ªh2Åw8&í####7 `Ùo#ö»#òöw$
½##Gê#ì#»#La)ì##Ý÷#{7í´éã»##ãî]¾[##{O#¾C##£¶G#û¼Eû#dL#ª:#PÉEÉ>Ó##ª:G#éaR^·BEµÏ+¹###y#N##È±
DÕ##5#"9Ní>#íFo##kp#ÂðÆè5¿ð½F®¯M##þð1#îi##Z #Z #Z#ô-¾#§èH»û¹ö9é#Ôä#001B2274001802007051
èÁ##<(#ÿ#¢²ÿ#è#éc#z¾vçÌá#¹#ý#x%ìÜ#çÌ##ùÍÙ#¹{Ç¯epmâí#¸Ö##¸=ÝÙ½¹uë·,ù#þ¼øl###£åg#,##-`q#ÿøæï
viÁ#]3#.O#þÊöèR##=##L#LÊk###¤à##ó#'V052 øé]+####ã!ÁC#s#q###åLj##Á¯Æ4#.àíT#¸Þ¹µ·¶É)ç#Ïå#<#/ð
Thanks,
Chakradhar.

Where can I find the path to a document in the Output File Repository.

Hello All
I'm somewhat confused......
Previously, in XI R2 it was possible to see the physical Output File Repository path for an instance. For example:
frs://Output/a_123/012/34/5678/abcd.wid
This information was available through the CMC by selecting the instance and viewing its Properties.
Can anyone tell me where this information can be viewed in XI3.1. I have checked through the CMC and cannot find it anywhere. When I look at the Instance Details of a particular instance, I do not see this information.
Thanks in advance.
J

My environment is XI3.1
Thank you to the previous poster but this only tells me the path the Output Repository (which I already know).
Sorry, I think maybe my question was not very clear.
I want to know how I can identify the physical path to a specific instance in the Output File Repository. For example:
frs://Output/a_123/456/7890/abcde.wid
In XI R2 it was easy to obtain this information by taking the following steps:
1. CMC
2. Objects
3. Search for and select the required object that has the required instance
4. Select the History tab to see the list of instances
5. Check the box against the required instance
6. Click on the Status of the instance to view the Instance Details.
Now, in XI3.1 (either InfoView, CMC or Instance Manager) the Instance details does NOT show the physical path to the .WID/.XLS/.PDF or whatever the format of the instance be.
Please can someone tell me where I can find this information.
Thank you.

FREE_SELECTIONS_INIT defining blocks on selection-screen.

Hi,
is it possible to define blocks on selection-screen if I use the function FREE_SELECTIONS_INIT.
And is it possible to define the select-option obligatory.
Best regards,
Marcus

hi
Yes you can make select-options as obligatory by using
SELECT-OPTIONS:
s_abs for <some thing> OBLIGATORY
and coming to the FM
the function module receives information about
the set of fields for which dynamic selections should be possible, and
returns a selction ID
i Think it is not possible
regards
Pavan

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

How to remove an selection screen element at the event

hi,
can any one tell me how to remove / Disable an selection screen element at the runtime after an event occurs like selection of Value from a parameter.
Thanks and Regards
Guhapriyan Subrahmanyam

TABLES : BKPF.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_BUKRS LIKE BKPF-BUKRS OBLIGATORY.
"Company code
SELECT-OPTIONS : S_BELNR FOR BKPF-BELNR MODIF ID M01.
"Accounting Doc No
PARAMETERS: P_GJAHR LIKE BKPF-GJAHR MODIF ID M02.
"Fiscal year
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON S_BELNR.
IF S_BELNR IS NOT INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'M02' .
SCREEN-INVISIBLE = '1'.
MODIFY SCREEN .
ENDIF.
ENDLOOP.
ENDIF.

How can i get the path to config folder placed inside the jar file?

Hi i have developed an RCP application using eclipse.
In my application config directory is there.
When i export my RCP application as JNLP Project the jar file is created which contains config folder inside it.
When i download the application using java web start , how can i get the path to config folder placed inside the jar file?
Will the config folder exists in local cache in my system?
Help needed.
-Deepak

-- This works in CS6:
tell application "Adobe InDesign CS6"
set myDocument to active document
set selectedRectangles to selection of myDocument
set theGraphicsLink to file path of item link of (graphic 1 of (item 1 of selectedRectangles))
--> "Macintosh HD:folder/folder/filename.tif"
end tell

Write the output of a query in ODI to file

Hi Friends,
I am using ODI 11g.
In ODI I want to write the output of the below query to a unix file.
SELECT 'H'|| rpad('SB9KT.KTPRTO.EBSDATA.D0000000','30',' ')|| rpad(to_char(sysdate, 'YYYYMMDDHHMMSS'), 16, ' ')
FROM dual;
Please suggest any inputs.
Thanks,
Lony

lony wrote:
Hi Friends,
I am using ODI 11g.
In ODI I want to write the output of the below query to a unix file.
SELECT 'H'|| rpad('SB9KT.KTPRTO.EBSDATA.D0000000','30',' ')|| rpad(to_char(sysdate, 'YYYYMMDDHHMMSS'), 16, ' ')
FROM dual;
Use OdiSqlUnload tool to write the output of the sql query to a file
Please suggest any inputs.
Thanks,
Lony

Selecting a row in the output of alv grid

hi,
how do i select a row in the output of alv grid?plz help...
regards,
sheeba.

Hi,
Please refer the code below:
*& Report ZDEMO_ALVGRID_SELROW                                        *
*& Example of a simple ALV Grid Report                                 *
*& The basic ALV grid, Enhanced to display capture each row a user has *
*& selected                                                            *
REPORT zdemo_alvgrid_selrow                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
SEl,                         "stores which row user has selected
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
*       Build Fieldcatalog for ALV Report
form build_fieldcatalog.
* There are a number of ways to create a fieldcat.
* For the purpose of this example i will build the fieldcatalog manualy
* by populating the internal table fields individually and then
* appending the rows. This method can be the most time consuming but can
* also allow you more control of the final product.
* Beware though, you need to ensure that all fields required are
* populated. When using some of functionality available via ALV, such as
* total. You may need to provide more information than if you were
* simply displaying the result
*               I.e. Field type may be required in-order for
*                    the 'TOTAL' function to work.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
* fieldcatalog-do_sum      = 'X'.
* fieldcatalog-no_zero     = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-do_sum      = 'X'.        "Display column total
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
*       Build layout for ALV grid report
form build_layout.
gd_layout-box_fieldname     = 'SEL'.
                                 "set field name to store row selection
gd_layout-edit              = 'X'. "makes whole ALV table editable
gd_layout-zebra             = 'X'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
*       Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
*            i_callback_top_of_page   = 'TOP-OF-PAGE' "see FORM
            i_callback_user_command = 'USER_COMMAND'
*            i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
*            it_special_groups       = gd_tabgroup
*            IT_EVENTS                = GT_XEVENTS
            i_save                  = 'X'
*            is_variant              = z_template
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
*       Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into corresponding fields of table it_ekko.
endform.                    " DATA_RETRIEVAL
*       FORM USER_COMMAND                                          *
*       --> R_UCOMM                                                *
*       --> RS_SELFIELD                                            *
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
* Check function code
CASE r_ucomm.
    WHEN '&IC1'.
*   Check field clicked on within ALVgrid report
    IF rs_selfield-fieldname = 'EBELN'.
*     Read data table, using index of row user clicked on
      READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
*     Set parameter ID for transaction screen field
      SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
*     Sxecute transaction ME23N, and skip initial data entry screen
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
    WHEN '&DATA_SAVE'. "user presses SAVE
    loop at it_ekko into wa_ekko.
      if wa_ekko-sel EQ 'X'.
*       Process records that have been selected
      endif.
    endloop.
ENDCASE.
ENDFORM.
Thanks,
Sriram Ponna.

Show Select query result in the text file.

Hi all,
i want to show my select statment records in the text file.
thanks in advance.
Mob.

you cannot do a select in a stored procedure.
you could do something like
SQL> set serverout on
SQL> spool output.txt
SQL> declare
       x varchar2(40);
     begin
       select * into x from dual;
       dbms_output.put_line(x);
     end;
X
SQL> spool offor use the utl_file package (more powerfull, less secure, write on the db-server instead of the sqlplus-client)

Publish to DVD says it completes, does not write the ISO file in version 13.

When I publish to DVD and select ISO it says it completes but it does not write the ISO file in version 13.

apsteinmetz
The DVD disc which is labelled 4.7 GB/120 minutes is in reality 4.38 GB. And the DVD disc which is labelled 8.5 GB/240 minutes is in reality 7.95 GB.
What version of Premiere Elements and on what computer operating system is it running? Can we assume 13/13.1 on Windows 8.1 64 bit?
What are you doing, a burn to disc DVD-VIDEO standard or widescreen on DVD disc or burn to disc AVCHD on DVD disc?
When you get to the burn dialog (and you have your disc in the burner tray), what does the Quality area of the burn dialog show for Space Required and Bitrate with and without a check mark next to "Fit Contents to Available Space"?
Or, can you do burn to Folder (4.7 GB) and/or burn to ISO Image (4.7 GB)? Are your successful burn to .iso files under 1 GB in file size?
Please quantitate "...shortening the timeline dramatically".
Thank you. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Preventing select-string from adding additional undesired strings in the output file

Hi friends
in PS 4.0 i am trying to write a function which
step1: export the list of all eventlogs ----> wevtutil el > "$home\documents\\loglist1.txt"
step2: deleted the following two lines from loglist1.txt
DebugChannel
Microsoft-RMS-MSIPC
( the reeson of deleting these two lines is wevtutil cl command, can't clear these two evenlogs among approximately 1000 logs)
in fact via select-string with -pattern -notmatch parameters, we select anything except these two line
step3: pastes the select-string contents into the same file ("$home\documents\loglist1.txt") or into new text file (for example
"$home\documents\loglist2.txt")
here is my code:
function MycleareventsAll {
cls
Wevtutil el > "$home\documents\loglist1.txt"
$mycontents = select-string "$home\documents\loglist1.txt" -pattern DebugChannel, Microsoft-RMS-MSIPC -NotMatch
cd "$home\documents\"
$mycontents | out-file loglist2.txt"
# also i tried ---> $mycontents | set-content "loglist2.txt"# also i tried ---> $mycontents | set-content "loglist1.txt"
but the problem is, in addition of deletion, unfortunatelly additional strings (filepath, filename, line number) are added into the final text file so wevtutil will fail clearing logs listed in text file.
here is contents of the final text file
C:\Users\Administrator\documents\loglist.txt:1:Analytic
C:\Users\Administrator\documents\loglist.txt:2:Application
C:\Users\Administrator\documents\loglist.txt:4:DirectShowFilterGraph
but i need the contents be the same as original file without that two specific line:
Analytic
Application
DirectShowFilterGraph
i searched but i didn't find a way to prevent select-string cmdlet from adding these edditional strings
(filepath, filename, line number) into output file while keeping the original contents.
note: -quiet parameter is not what i want. it removes all contents & simply inserts a true or false.
any help?

don't forget that Guys here know the basics of security such as clearing event logs & ...
how odd if you don't know this.
clearing all events is useful in test environment for example when i ma teaching my students & need to see all newly created events & work on them
Then you are teching your students how not to use an event log. We use filters and queries to access event logs. We also use event log CmdLets in PowerShell. WEVTUTIL is ok but it does not marry wellwith PowerShell as you have seen.
I have found very few people who are not certified in WIndows administration that know much about eventlogs when it should be a ver important part of administration. PowerShell has mmade EL management much easier but few take the time to learn how
to use the EL support in PowerShell.
I see no point inclearing event logs. It accomplishes nothing.
¯\_(ツ)_/¯
oh your are introducing me filters & queries in event viewer !! please stop Laughing me this way.
your problem is you judge about people's knowledge & you persist on your absurd judgments.
look at your sentence:
"Then you are teaching your students how not to use an event log"
where from you tell this? have you been present in my classes to see what i teach to my students?
have you seen that i told to my students not to use event viewer?
my goal of clearing events is related to myself. it's non of your businesses.
people are not interested to here concurrent irrelevant advises from you like a grandmother. they are searching for a solution. their intent of doing tasks is not up to you.

A sporadic compile error vbc : error BC31019: Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.

Hi,
This is developer from Autodesk. We get this compile error from time to time. This is a sporadic failure. We can't find any issue in our own project.
vbc : error BC31019: Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.
I find a help doc from the website to try some steps to solve this issue.
Error ID: BC31019
To correct this error
Compile the program again to      see if the error recurs.
If the error continues, save      your work and restart Visual Studio.
If the error continues, restart      the computer.
If the error recurs, reinstall      Visual Basic.
If the error persists after      reinstallation, notify Microsoft Product Support Services.
My question is what the root cause for this issue. Could you please give us some explanation where the issue should be, VB compiler? .Net Framework?
Visual Studio? Operating system?
Thanks
Wilson

Hi hitzwx,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System, and Visual Studio Editor.
Based on your issue, I am not sure what the root cause for this issue. But I suggest you can try some suggestions so that narrow down this issue.
(1) I suggest you try to create a new simple VB project and then check this issue.
(2) In addition, maybe you see the document about your issue. If possible, I suggest you can try these suggestions to troubleshooting this issue.
https://msdn.microsoft.com/en-us/library/85s7w197.aspx
>>Unable to write to output file 'D:\Revit\Dev32\RevitAdditions\Source\..\Intermediate\ReleaseWin32\VBNETSnippets\VBNETSnippets.dll': The specified image file did not contain a resource section.
In addition, I suggest you can check if the specified image file in the output folder or you can try to click your image file in the Solution Explorer-> select the Copy to Output Directly properties->Copy always check this issue again.
If you have any update message about your issue, please tell me.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How to read the and Write the PDF file give me the solution

Hi all,
How to read the and Write the PDF file give me the solution
My coding is
import java.io.File;
import com.asprise.util.pdf.PDFImageWriter;
import com.asprise.util.pdf.PDFReader;
import java.io.*;
import java.io.FileOutputStream;
public class example {
// public example() {
     public static void main(String a[])
          try
          PDFReader reader = new PDFReader(new File("C:\\AsprisePDF-DevGuide.pdf"));
               reader.open(); // open the file.
               int pages = reader.getNumberOfPages();
               for(int i=0; i < pages; i++) {
               String text = reader.extractTextFromPage(i);
               System.out.println("Page " + i + ": " + text);
// perform other operations on pages.
PDFImageWriter writer = new PDFImageWriter(new FileOutputStream("c:\\new11.pdf"));
               writer.open();
               writer.addImage("C:\\sam.doc");
               writer.close();
               System.out.println("DONE.");
reader.close();
          catch(Exception e){System.out.println("error:"+e);
          e.printStackTrace();
I get the pdf content then it returns the string value but ther is no option to write the string to PDF, and we only add a image file to PDF,but i want to know how to wrote the string value to PDF file,
Please give response immtly
i am waiting for your reply.
thanks,
Suresh.G

I have some question flow
How library to use this code.
I try runing but have not libary.
Please send me it'library
Thank you very much!

Define path in selection screen to write the output file to pres. server

Similar Messages

Maybe you are looking for