Defining a non local server for use within the IDE - version9.2

How do I add a server that's running on another machine to one that my
workshop is running. When I invoke the New Server dialog and modify the
host from localhost to the one on which the server instance is running, then
everything is blanked out and I can't do anything. I can't find anything in
the documentation that tells me how to do this.
Thanks,
SB

While deployment can be done manually, it is possible to run and debug a
server remotely.
For an example on how to do things remotely, see Chris Hogue's blog:
http://dev2dev.bea.com/blog/hogue/archive/2006/09/debugging_remot.html
Could you send me info on your environment? broth at bea dot com, and I
will try and get you some answers. This sounds like a requirement we need
to meet.
br
Stanley Beamish wrote:
How do I add a server that's running on another machine to one that my
workshop is running. When I invoke the New Server dialog and modify the
host from localhost to the one on which the server instance is running, then
everything is blanked out and I can't do anything. I can't find anything in
the documentation that tells me how to do this.
Thanks,
SB

Similar Messages

Font management on a Mac Server for use via the network

Can font management be done on a Mac Server through Font Book so that other users can have one place where they can access our organized fonts via the network?

Ok found a sollution, i tried a couple of things, it boils down to this.
login as admin user
1. demote the network user to a local user,
     use workgroup manager for it use export in menu to export user from LDAP
     import to Local directory, reset the password and delete the LDAP user.
2. you chould now be able to localy login to the account, do that.
3. open the terminal and run the following commands (probably need sudo for it and you need to change <username> to the user you want to change)
     chmod -R -N /Users/<username>/
     chown -R <username>:staff /Users/<username>
     chmod -R 700 /Users/<username>
4. check that every thing in you're account is working again as should.
5. promote local user to network user.
use workgroup manager for it use export in menu to export user from Local
     import to LDAP directory, reset the password and delete the Local user.
this did the trick for me, hope it helps.
Ben

HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad? If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account. I've seen reference to the "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app. I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for. I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air. Any help would be greatly appreciated.

If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

Program to download on Non Unix Server location using SFTP

Hi,
What commands/function modules can use for download the file on Non Unix Server location using SFTP.
Thanks,
Fract

Please check Walters reply in the foloowing thread
a®

Building an AppCloud App for use within your organization only.

I am re-posting this from, Register your App because, it was a good point this should have been a separate discussion.
Scott
Scott Kent Jul 14, 2014 4:56 PM
I am trying to get more details on how to Build/Register "Private" AppCloud Apps and confirm at design time that we can deploy our in-house AppCloud Apps on several of our Eloqua instances without publishing them.
My assumption is that one would setup the App under the Provider section for each of the Eloqua instances so that each Eloqua Instance can see and install our our in-house private app and use it without publishing. I worry about this method because it give the impression the AppCloud App is in development or testing.
Or
I was hoping there was some way to officially register our app so we are using a production workflow but our app is not published or listed anywhere?
T.J. Fields Jul 14, 2014 6:06 PM (in response to Scott Kent)
Hi Scott,
The best practice here would be for you to:
1. Register as a Provider in a development instance of Eloqua.
2. Build out your app and Register it, along with your Service(s) under that Provider.
3. Whitelist any Eloqua client installs that you wish to allow to use your App. Do this by clicking the Publish to Another Site button.
4. Give the App install URL (found at the bottom of the App Details page under Catalog) to any of those clients that you whitelisted to use your app.
This way, only those clients that you've specified will be able to install and use your App, and it's not listed anywhere. You could also click the Publish to App Cloud button, which simply whitelists every install. The App will never actually be listed anywhere, as there is not yet a mechanism in the framework to do this. The only way to find and install your App is by using that install URL, so you'd have to give it out.
If you are a client that is building an App for use within your organization, you could also use your company's Eloqua install to register your provider, but as a development partner, your developer instance is intended to be used to register and manage your services.
Hope this helps.

Thanks, scott.kent ! I'm sure many will benefit from your great post!

Server for NFS deletes the partially copied file after failover

Hello,
I found the strange behaviour in Server for NFS in the microsoft foc cluster.
I have a foc cluster of two nodes(windows server 2k12r2) and server for nfs role is installed on both. now I did mount the export from the client(windows server 2k12r2) where client for nfs role is installed;
and a large file copying from the clients local drive to the mounted export is started.
Now during this copying operation I did switch the export to second node(moved it using the failover cluster manager wizard). and what I found is the copying interrupts with
error message "there is problem accessing file path" and on retry the copying starts all over again, I mean if the 50% was copied previously then
after retry it will start from 0%.
I watched the system events on second node with the "procmon" and I found; after the disk gets attached to the second node, the delete operation is get called for this file.
Now what I need to know is why this delete is been called and who made this called. In the stack of the delete operation I could track the nfssvr.sys but not sure what attributes of that file made it to call the
delete.

Hi,
It takes us some time to create a failover cluster for testing.
We tried to copy a large folder which contains many files, and a large VHD file we created.
The result is the same - it will not restart the copy after failover. Thus as you said it is not caused by design and it should be an issue on your side which causes a Delete and redo the copy.
Is there any application or specific network settings could terminate a disconnected copy process? Currently I do not have much information about this.
Edit: I noticed that it is NFS share and in our test we are using SMB share. Will do the test again to see if any difference.

How do I get Verizon to unlock my iPhone4s for use in the US (NOT overseas)

12/13/13 Huffington Post
WASHINGTON (Reuters) - Major U.S. wireless carriers on Thursday pledged to make it easier for consumers to "unlock" their mobile phones for use on competitors' networks, responding to pressure from consumer groups and the top U.S. communications regulator.
Verizon Wireless, AT&T Inc, Sprint Corp, T-Mobile US and U.S. Cellular agreed to "clearly notify" customers when their devices are eligible for unlocking and to process unlocking requests within two business days, said wireless industry group CTIA.
U.S. wireless carriers often "lock" smartphones to their networks as a way to encourage consumers to renew their mobile contracts. Consumers often get new devices at a heavily subsidized price in return for committing to longer contracts.
The top carriers have long allowed consumers to unlock devices and take them to another network at the end of a contract term - commonly, two years - though the process varies by company and can be quite painstaking.
Then in late 2012, the Library of Congress, the minder of U.S. copyright law, completed a new triannual review of exemptions to the law that effectively made phone unlocking illegal, even after the consumer completed the contract.
The ruling surprised many telecom observers, outraged phone users, and finally landed on the White House's agenda thanks to an online citizen petition that gathered 114,322 signatures, more than the 100,000 needed to spur a response. The White House sided with the petitioners.
I have been a Verizon customer for a decade (10 years). Verizon is now misleading me about having my iPhone 4s unlocked. After a long discussion they finally unlocked my families phones leading me to believe it was nationally. I just found out that they are REFUSING to unlock my phones in an effort to keep me with Verizon and very large monthly payment plan. If my phones were unlocked, I might stay with Verizon, however, in light of their deliberate attempt to lie to me and keep me hostage, I will most like buy new phones and move away from Verizon within the week.
Can anyone tell me if they have had success in having Verizon unlock their iPhone 4s?

I believe that the carriers have 3 months to partially implement this "pledge" and 12 months for it to be fully implemented.
I have not heard of anyone getting a Verizon iPhone 4s unlocked yet for use in the US.

Outlook Sync Error SOLVED - Multi-day repeating appointment cannot be converted for use on the Handheld...

*UPDATE 1/23/2009 07:08 AM* This is a partial fix. I no longer think the Recurrence Range is the culprit. It seems the Time Zones features between Outlook & Palm are not cooperating. This explains why my 12 am events are syncing as 6 pm the day before; I live in GMT-6:00 so it's moving my events ahead by 6 hours. Another event I set for 1 pm in Outlook was changed to 7 am on my Treo. I am going to start over and recreate each event, this time setting the Time Zones, which I hadn't done before. I tested it out and it worked with a single event... let's see how long it lasts. I've also found that using 'No Time' on my Treo is not compatible with Outlook. It's better to set a time with 0 minutes duration.
*UPDATE 1/23/2009 04:11 AM* This is a partial fix. My monthly and yearly problematic recurring events are now showing up at 6 pm the day before on my Treo, though my Outlook calendar is fine. I think this has to do with the Recurrence Range Start/End in Outlook, which is set automatically. If only there were a way to change this...
After a WHOLE LOTTA trial-and-error (like 3 days worth), I think I finally solved my OLERR:14-001 issue!
Problem: Syncing Palm Treo 755p calendar with Outlook 2007
Error Message (simplified):
HotSync session completed with messages on [date] [time]
HotSync session started on [date] [time], and completed in [0] seconds
Outlook Calendar synchronization completed with messages
Duration: [0] seconds
Outlook Calendar
The multi-day repeating appointment titled [event] beginning [date] [time] cannot be converted for use on the Handheld. Please divide the appointment up into single-days and re-synchronize.
OLERR:14-0001
- Desktop overwrite HH Sync
Note: You will likely have several of these ‘Multi-day’ instances in your hotsync log (I had 58). You may want to change Calendar in hotsync to "Desktop overwrites Handheld" after you get this error, to avoid erasing events while you are fixing this issue. Otherwise, you may have to restore them from a backup copy (if you have one) and start over. You can switch back once you’re through.
Solution: First, I tried this Palm KB Article: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=31167. After this didn’t work for me… I did trial-and-error. I believe the problem is that each recurring event, which you set up as ‘All-day’, must be changed to have a duration of 0 minutes from within Outlook. I was able to change some events directly, but I found that some of the records had corrupted, and would just revert. My fool-proof solution was to recreate EVERY problematic event (yes, one-by-one) using the following steps:
Open Outlook
Go to your default calendar, where your events are synced
In the top menu choose ‘View’ > ‘Current View’ > ‘Recurring Appointments’
Open a ‘New Appointment’
Enter subject and other options, such as Categorize, Importance, Time Zones, or Reminder
Make sure starting and ending date & time are the EXACT same
Select ‘Recurrence’ & choose your pattern
I did not choose ‘No end date’ (hence the Palm article), but rather ‘End by:’ and typed in 2031, then pressed tab to auto-generate a suitable end date. I chose 2031 because that is last year my Treo’s calendar goes to. Click OK
Repeat for every event in your error log, until you get a clean "Desktop overwrites Handheld" hotsync (Outlook should be closed when you sync)
Switch Calendar in hotsync back to "Synchronize"
Even though I still get the message OLERR14:001, my syncs are successful. Now I will give my Treo time to see if the issue returns later. Until then, happy Outlook syncing and good luck!
Post relates to: Treo 755p (Sprint)
Message Edited by akeaw3000 on 01-23-2009 04:11 AM
Message Edited by akeaw3000 on 01-23-2009 07:08 AM

hello,
if all of your data is on the phone you can change the sync action to handhled overwrites desktop
how to:
open palm desktop software
on the top left click on 'hotsync' and then 'custom'
on the calendar conduit
highlight it and click on 'change'
then choose 'handhled overwrites desktop'
hope this will help you
Post relates to: Palm TX

HT204053 "Your account is not valid for use in the US store. You must switch to the Canadian store before purchasing" I keep getting this message so cannot load any apps at all and I am in Canada dammit! Help!

" your account is not valid for use in the US store. You must switch to the Canadian store before purchasing" this is the message I get every time I try to install an app. I am already in Canada, how do I get rid of this?

Welcome to the Apple Support Communities
See "Change your iTunes Store country" > http://support.apple.com/kb/HT1311?viewlocale=en_US&locale=en_US

Error:-Please enter a company name to use within the iTunes Store

Hi ,
I have registered for iOS developer program (99$) one .
Now I am trying to block the app name which i will upload soon . When i go to itunes connect and create a new app and provide all the information needed, I get the error "Please enter a company name to use within the iTunes Store."
Can someone help me out on this ?

I have the same error, but I think we will get no solution for this problem.
You've get no answer here and the Apple support also doesn't send an answer how to solve the problem.
BTW I have also Windows 7 and the newest version of iTunes 64-bit.
Greetings Mike

"This Apple ID is only valid for use in the Canadian Store." - but I'm in Canada!

I just restored my iPad, and am using a new Apple ID on it, that I just created.
When I try to download apps from the App Store, I get the following notice: "This Apple ID is only valid for use in the Canadian Store."... but I live in Canada!
I checked in Settings > General > International > Region Format, and it does indeed say Canada. I also checked my region from within my Apple ID account, and it also says Canada.
I'm at a loss here guys, can anyone shed some light on how to rectify this situation?
Thanks!
PS: I also should mention that before I restored my iPad, I didn't have this problem. Only with the new Apple ID.
Message was edited by: JTousignant

You do have a credit card with a Canadian billing address registered to the new account do you not? In other words, you are not trying to use a credit card with a U.S. billing address are you?

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Whenever I updated or downloaded a new app from the App Store, a message appears saying: "Account Not In This Store Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing." I made some research onl

Whenever I updated or downloaded a new app from the App Store, a message appears saying:
"Account Not In This Store
Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."
I made some research online and asked a few of my friends with the same problem. All they did was sign out of iTunes from settings>iTunes & App Stores or from the App Store itself and signed back in. It worked for many of them but not with my iPhone 4s. It really does get on my nerves to always sign out and back in to the App Store as it sometimes works and allows me to update and download or most of the time it doesnt.
When viewing my Apple ID account on my iPhone (after entering the password) it either views my account or says:
"This Apple ID is only valid for purchases in the U.S. iTunes Store. You will be switched to that Store. Try your purchase again."
So I press on OK then either switches me to the App Store app of its choice, or says "Cannot connect to iTunes Store".
I tried restoring iOS6 hoping it was a bad installation, but i still have the same problem.
Can anyone help me please?
Arian

Are you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
If you keep encountering problems contact iTunes support. They will help you sort it out.

Why do I get the message when I try to purchase an app or song on itunes using my iPhone5? "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to the New Zealand store before purchasing."

When I try to buy either an app or a song via iTunes, I have just started getting the following message and I am unable to change the store location. "Account Not In This Store. Your account is not valid for use in the U.S. store. You must switch to the New Zealand store before purchasing."
This problem has only just started happening. I am on an iPhone5 iOS 7.0.4.
Very frustrating. Can someone please tell me why & where the change has occured and how to fix it? In the past I have purchased many apps and songs on itunes and never had this problem.
Thanks a mill :-)

Click here and follow the instructions to change the iTunes Store country.
(97125)

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

Defining a non local server for use within the IDE - version9.2

Similar Messages

Maybe you are looking for