Defining port for a proxy at runtime.

HELLO FRIENDS...
Is there anyway we can define the port for a proxy at runtime ?
THANK
PranaV.

Interesting scenario.
Never tried it, but my thought is that even if you can achieve this dynamically, it will not be a very performant solution. Also what is the requirement which makes you take this route to dynamic lov region?
--Shiv

Similar Messages

Error in Logical port for Consumer proxy in SOAMANAGER

HI Experts,
While creating Logical port for Consumer proxy in SOAMANAGER I am facing problem
"SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL ".
Kindly suggest.

Hi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh

Error while creating logical port for Consumer Proxy in SOAMANGER

Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari Nambiar

Hi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar

Logical port for client proxy

Hi,
when consuming a webservice i have to create a logical port and this port will be used when i create an instance of the proxy class e.g.
DATA: lo_proxy TYPE REF TO /ipro/co_bbp_cms_ibf_metadata.
CREATE OBJECT lo_proxy EXPORTING logical_port_name = 'E6S_300'.
The question is how could i know how the customer will name the logical port?
Is there a way to get a list of logial ports for a give proxy class?
Regards,
Christoph

the following table holds all the logical port for a given proxy class
SRT_LP
Regards
Raja

Example wsdl and logical port for consumer proxy anyone ?

Hi,
Could please somebody give me an example of external WSDL file and logcial port created for the WSDL file in SOAMANAGER ?
I need to create manually logical port for my consumer proxy and I am missing something because my logical port is not active.
Any example is more than welcome.
I need to know how to populate fields manually on the following tabs based on the info in a WSDL file:
Consumer Security Additional Information Web Service Addressing Messaging Transport settings Message Attachments Operation specifi
Thanks and Regards
Agnieszka
The message, I am getting, when creating logical port is:
Operation 'SrtFmStatefulTf' not found [NS: 'urn:sap-com:document:sap:soap:functions:mc-style']
I think that maybe something is wrong with my wsdl.
Edited by: Agnieszka Domanska on Nov 17, 2010 5:41 PM

Hi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh

Dynamic Host and Port for Web Proxy

hi,
When I create a web proxy in JDev I supply the hostname and the port for the web service. The code is then compiled and then deployed. However I want the host and port to be dynamic (kept in a varaible) so when I move my deployment from Development to Test server I just need to change a value in a database or text file. I don't want to re-compile and deploy the code when I move servers. Is there any way to do this??
Thanks
Stephen

Hi,
not so in the WSDL file that is created. If from the client side access, then WS poxy classes allow you to do this
Frank

Changing port for OAM proxy

Hi all
I need to change the port for the OAM proxy which is 5575 because this port is already in use for a different application , how can I do that ?
Is this change going to break the access gate for OIM , I have OIM OAM integration scenario
Thanks

If i understand you right then .....i guess what you need is to have console on a differnt port than the http listen port ....for this you can use Administartion port.....in your console go to the domain tab and in that Enable Administaration port and then you can use this port for the administrative traffic.....so the new url for consle will be t3s://ipaddress:adminport/console..please test this in a test enviornment first......
The other thing you were telling about is to change the context root for the console application ...you can do this in the same domain tab under configuration ...in the advanced tab you would see Console Context Path...just modify (sayfor eg: MyConsole) this and then you can use that value to bring up your console...http:ipaddress:port/MyConsole.....
Both the above changes needs a restart of admin server......
try in a test enviornment first.....
Hope this answers your question .....
Let us know if this works.......

Read logical port for the proxy

HI ,
There is method or FM that can bring all the logical port that available for proxy class,
logical port that defined on SOAMANAGER or LPCONFIG .
Regards
Joy

Try this way
    call function 'RFC_READ_TABLE'
         destination                rfc_sys
         exporting
              query_table          = 'SRT_LP' " Table for Logical Ports
         tables
              options              = options1
              fields               = nametab1
              data                 = i_srt_lp[]. " Output table contains call values for proxy class after fm call
a®

Logical port for CO_SERVICES_REGISTRY_FLAT_SI

hi,
I am trying to set up a connection from SAP to service registry...
when i try createing a logical port for consumer proxy CO_SERVICES_REGISTRY_FLAT_SI it asks me for the following
1. WSDL access URL
2. WSDL access user/pwd
what should i specify here ??

Hi Hema,
Please check SAP documentation [Setting Up the Connection to the Services Registry|http://help.sap.com/saphelp_nwce711/helpdata/en/25/683fbe7e01407cb20995d10d71c895/content.htm]
Many Thanks
Jitendra Soni

How to Assign Logical port for a standar Consumer proxy

Hello,
I'm working with a SAP application creating a WS Connector that ask me for the following data:
- Class name:
- Logical Port name:
As far as I have read SAP delivers for this application an example implementation for the following web service: ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In with the /BCV/CL_SIN_WS_BOM class.
And the help also says that We can find the example implementation delivered by SAP for the Web service ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In in the package /BCV/SIN_PRX, under Service Consumer /BCV/CO_PRODUCTION_BILL_OF_MAT
In se80 transaction under /BCV/SIN_PRX package I can find /BCV/CO_PRODUCTION_BILL_OF_MATERIAL consumer proxy.
As far as I know, I just need to assign a Logical port to this proxy.
So, I go to soamanager transaction under "Service-Administration" --> "Single Service Configuration" and find this Consumer proxy. Then, under Configuration tab I select "Create logical port" option but I need to fill an URL for WSDL access.
Where can I find this URL? I think that I need to provide de WSDL URL (end point) of the ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In Web Service but I can't find it on the soa manager. Or maybe I need to implement a WS by my own WB using the /BCV/CL_SIN_WS_BOM class?
I appreciate if someone could help me with these SOA concepts.
Thanks in advance,
Abigail.

Hi Abigal,
In SOAMANAGER , u can configure the logical port in 3 ways first it by WSDL and second by manually and third by PI.
1. WSDL based : URL will automatically determined using WSDL file.
2. MANUAlly : in this , we have to provide the URL .
Thanks
jitendra

Change/Configure Host and Port for the Web Service Proxy with Server

Hi,
Is there a way to configure Host and Port in generated proxy for Web service depending upon server. (ADF 11g)
Scenario:
We are consuming Credit Card web service from a service provider and have different Host and Port details for development, QA and Prod.
So we created proxy classes using wsdl for development and things work fine, but when deploying code to QA or Prod we need to change the Host
and Port details.
Is their a way we could user variable's for Host and Port which looks to some configuration file to evaluate their values
based on server.
I am a bit new to this web service .. will appreciate if someone could provide an example.
Thanks.

Are you using Web Service Proxy or Web Service Data Control?
If you are using Web Service Proxy. Right click on your Proxy --> Properties --> Port Endpoints. Here you can change the IP & Port details for each port.
Venkat

TC related for IDOC (Defining Port,Defining Partner Profiles...etc) RFC and

Hi All
Can anyone pls give me all the TC related for IDOC (Defining Port,Defining Partner Profiles...etc) RFC and BAPI
Thanks
ss

Hi SS..
 SM59-For creating the RFC destination
 we21- For ports
 we20-Partner profiles.
For more inforamtion Please look at the below information:
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP XI towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
 Thanks and Regards,
 Chandu.
Message was edited by:
 Chandu
null

Printer is asking for a proxy port,how do i find that number

my printer is asking for a proxy port number ,how do I find that number?

Hey tomdenise,
If your network is not on a proxy, you do not need to enter a proxy. Here are the steps you need to go through to resolve this issue.
1. Find your printer's IP address by printing a network configuration page.
2. Type you IP address into the address bar of your web browser.
3. Click on the network tab at the top of the page.
4. Look at the left hand side and click IPv4 under wireless.
5. Change the IP settings to Manual.
6. Enter the printer's IP address, your subnet mask, and your routers IP address or default gateway in the spaces.
7. Set the Prefered DNS to 8.8.8.8.
8. Set the Alternate DNS to 8.8.4.4.
9. Click apply.(You may need to refresh the page if it says processing for longer than a min and click apply again.)
10. Now try to enable Web Services.
Although I am an HP employee, I am speaking for myself and not for HP.
If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

What port for osx server web services proxy server?

I was just wondering, my server has a proxy server working on 10.1.0.xxx what should i put in the client mac network settings so it can use the proxy server should i point it at 10.1.0.xxx or the domain name and what port is the usual for the proxy server?

There is no set standard for the port number. It's whatever you configured.
As for hostname vs. IP address - it doesn't really matter. If the client can resolve the hostname correctly then you can use that.
Personally, though, I'd always use a hostname such as 'proxy.mydomain.com' so that I could easily move the proxy service to a different machine if needed just by changing the DNS entry (not something that is easy to do if you have many machines all connecting via IP address).

How to use an authenticated user for a proxy call

Dear all,
I am currently working on a JEE application where the user needs to authenticate (for this I have configured the web.xml).
Now inside this application I need to do a proxy call to a PI webservice.
I would like to use the user credentials of the already logged in user in order to call the proxy.
What I don't want to do is to use a service user for the proxy call.
The code I am trying to call looks something like this:
     private IntegratedConfigurationIn getPort() throws Exception{
          IntegratedConfigurationIn port = null;
          try {
               IntegratedConfigurationInService service = null;
               service = new IntegratedConfigurationInService();
               port = (IntegratedConfigurationIn) service.getIntegratedConfigurationIn_Port();
              BindingProvider bp = (BindingProvider)port;
              bp.getRequestContext().put(BindingProvider.USERNAME_PROPERTY, user);
              bp.getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, password);
              if (url.length() != 0)
                   bp.getRequestContext().put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, url);
          catch (Exception ex){
               ex.printStackTrace();
          return port;
The examples I found to retrieve the userdata pointed to codes similar to this one:
public HttpServletRequest getHttpRequest() throws Exception {
          // Get runtime context
          Properties props = new Properties();
          props.put("domain", "true");
          Context initialContext = new InitialContext(props);
          ApplicationWebServiceContext wsContext = (ApplicationWebServiceContext) initialContext
                    .lookup(" /wsContext/ApplicationWebServiceContext");
          HttpServletRequest req = wsContext.getHttpServletRequest();
          return req;
com.sap.security.api.IUser sapUser = com.sap.security.api.UMFactory.getAuthenticator().getLoggedInUser(getHttpRequest(), null);
          IUser ep5User = com.sapportals.wcm.util.usermanagement.WPUMFactory.getUserFactory().getEP5User(sapUser);
Now I don't know how to bring it togehter and how to use an authenticated user for the BindingProvider.
I would appreciate any hints or ideas.

Peter,
from the first screenshot, what I understood is that, you are calling an inbound PI web service that is intended to create an integrated configuration object (this is used for whole lot of other reason completely) but not actually calling a development web service.
For this, you would have to generate your client classes from the WSDL provided by the PI developer for that particular service. Once you get those client classes generated, you could used the method provided in the other screenshot to extract the user and password and call the intended web service.
Vijay Konam

Defining port for a proxy at runtime.

Similar Messages

Maybe you are looking for