Delete multiple records with MDM WebService

Hi everyone!
I'm using an MDM Web Service with delete functionality. It identifies records to be deleted either by internal ID or by defined field value. The point is that i need this web service to delete all records with one specific value in specific field (lets say all the records with value "hidden" in field "VISIBILITY").
But when I try to map value "hidden" of the field "VISIBILITY" to the web service input in BPM it says in tracing that there are multiple fields with that value in the table (certainly there are) and that it can't process them. Cause it doesn't support multiple processing. Is there any way to do that?
Thanks in advance,
Peter

Hi Peter,
I guess you can do that if you first retrieve the internalIDs of the to be deleted records:
Do a search for the records with the field value.
Then you will receive the internalIds of them.
Then you can put these internalIds to the delete records webservice. Each in a new element of the record identification.
I hope this helps!
Best regards,
Stefan Brauneis

Similar Messages

Delete multiple record in tabular with check box.

Hello guys,
I need your suggestion..
I have master detail block. (INSTRUCTOR and SECTION)
At detail block, I add check box item (name: RB_SECTION_ID) with Database Item "No", and value when check :SECTION_ID (on the property).
I make a button DELETE. The trigger was DELETE from SECTION where section_id = :SECTION.RB_SECTION_ID and
instructor_id = :INTRUCTOR.INSTRUCTOR_ID;
but It not work.
How we delete multiple record by check multiple check box then click DELETE button..??
Regard.
Nia..

You datablock in the form cannot automaticaly refresh the changes you make with the SQL statements.
For that you need to explicity call certain built-ins to refresh the data
execute_query(no_validate) --> fetches the available data for that session. Here you deleted some records, so those records will not be available until you do a rollback in the same session(i.e, you exit the form without saving). But until you save, those deleted records will be avaiable for the users in other sessions)
Also, your code works only because the records you deleted are all already saved ones.
So it will be a good practice to use built-in of form builder rather than DML stmt.s
Here you can do like this
begin
go_block('TRY_TABLE');
first_record;
loop
if :TRY_TABLE.CCKBOX = 'Y' THEN
delete_record;
END IF;
NEXT_RECORD;
EXIT WHEN :SYSTEM.LAST_RECORD = 'TRUE';
END LOOP;
END;
If your code is like above one, you can revert your deletion by simply giving a F7 (enter-query) and F8 (xecute query).

Deleting multiple records via html checbkoxes?

I'm trying to delete multiple records in a table based on the
selection of checkboxes.
I have an html form with 4 checkboxes. If a user checks any
box, I want to delete the associated records. and if they ucnheck
something I want to insert multiple records. This form does not
hold the primary keys but other unique parameters. Here is my sql
statement.

> and that keyword is not mentioned in the DELETE
statement chapter.
IN is not specific to DELETE statements. It can also be used
with SELECT or UPDATE statements. It is a way of specifying
multiple values in a single statement, instead of using multiple OR
statements:
http://www.w3schools.com/sql/sql_in.asp
Since you are using cfqueryparam, you also need to use
list="true" (ie you are passing in a list of values, not just one)
<cfset listOfValues = "1,2,5,6,8">
WHERE ColumnName IN
<cfqueryparam value="#listOfValues#" list="true"
cfsqltype="...">

To delete multiple records

hi all,
Can any tell tell me how to delete multiple records in table control of a screen
i have checked the multiple rows in table control attributed and assigned a name.I needhelp in writing code.
Thanks

hi,
As you have marked multiple fields in the table control your table control is mulple selection enabled.
<b>PROCESS AFTER INPUT.</b>
loop at IT_CONF.
    field X_CONF-CHECK
      module TC_CONF_mark on request.
endloop.
module TC_CONF_user_command.
MODULE USER_COMMAND_0102.
*this modifies the internal table with check field as X
module tc_conf_mark input.
data: g_tc_conf_wa2 like line of it_conf.
if tc_conf-line_sel_mode = 1.
    clear g_tc_conf_wa2.
    loop at it_conf into g_tc_conf_wa2
      where check = 'X'.
      g_tc_conf_wa2-check = ''.
      modify it_conf
        from g_tc_conf_wa2
        transporting check.
    endloop.
endif.
modify it_conf
    from x_conf
    index tc_conf-current_line
    transporting check.
endmodule.
module tc_conf_user_command input.
* write code to handle table control scrolling /pageup/pagedown
endmodule
*Check the ok_code
module user_command_0102 input.
    case ok_code.
      when 'DEL'.
       * Delete from internal table where check = X
    endcase.
endmodule.
<b>PROCESS BEFORE OUTPUT.</b>
module TC_CONF_change_tc_attr.
loop at   IT_CONF
       into X_CONF
       with control TC_CONF
       cursor TC_CONF-current_line.
    module TC_CONF_get_lines.
endloop.
module tc_conf_change_tc_attr output.
describe table it_conf lines tc_conf-lines.
endmodule.
module tc_conf_get_lines output.
g_tc_conf_lines = sy-loopc.
endmodule.
Thus you will delete the marked lines from the internal table in PAI and in PBO you can read the refreshed internal table without the table entries that are marked as deleted in the table control and display the same in the table control. This is another way.
Regards,
Richa

Delete Multiple Records from Item Master

Hi,
We received wrong master data which has been uploaded and two groups have to be deleted. All the items in those particular groups have also to be deleted. Can anyone suggest how to delete multiple records from Item Master?
Currently I am navigating through each Item and doing a Right Click + Remove. It is very painful given the huge number of records.
Regards
Sudatt

Hi Sudatt.....
I recommend you not to run any kind of delete or update SQL query as it harms DB.
You can create your own front end application with the help of any technical consultant which can be
achieved very easily. Else such problems create a big problem during upgradation to next version.......
Regards,
Rahul

Please Help! Deleting multiple record by using checkbox selected

Hello everybody,
I am a new to JSP. I really don't know how to delete multiple record by using checkbox selected and pressing submit button.
For example, deleting webmailbox letters using checkbox selected and delete button. The mail we checked will delete from the inbox.
I like to use my user account deleting system of my project like above example.
How can I do in JSP? I will very please you if you share you knowledge and code for me.
If you have URL address, could you share me for reference?
Please help me...
With Thanks and Regards,
wtdahl

Take a look at this thread, I thing it answers your question quite good:
http://forum.java.sun.com/thread.jsp?thread=516658&forum=45&message=2463505

How to Delete Multiple Records using selectbox in jsf

Hi!
My Senario is I want to delete multiple records using checkbox. After selecting multiple records when i click the delete button the selected
rows shuld be deleted.if am doing like this but the edit ,delete for each row functionality is not working.
<h:selectBooleanCheckbox id ="bcb" value="#{item.empno}">
</h:selectBooleanCheckbox>
But other functionality is not wokring.
Can any one plz tell how to select the multiple records and how to send the id to the serverside.
I want code code for jsp and as well as backingBean how to accaess .
Any Reply shuld be apreciated

You may find this article useful as well: http://balusc.blogspot.com/2006/06/using-datatables.html
Check the chapter "Select multiple rows" for two generic ways to select multiple rows in a datatable.

SUN TEAM: Bugs in update and delete a record with long query

Creator Team,
In my opinio there is a bug issue with update and delete a record with a complex sql query. I�m using oracleXE and ojdbc14.ar with tomcat
In just two page I�m receving the following msg (I have 12 pages doing the same thing with less complex queries)
* Number of conflicts while synchronizing: 1 SyncResolver.DELETE_ROW_CONFLICT row 2 won't delete as values in database have changed: 2006-11-29
* Cannot commit changes: Number of conflicts while synchronizing: 1 SyncResolver.UPDATE_ROW_CONFLICT row 0 values changed in database
when i tried to delete or commit the updated changes in the register...
The interesting is that this code function with jdbc of jsc...
My query is bellow:
SELECT ALL PATRIMONIO.TB_BEM.INCODIGOBEM,
PATRIMONIO.TB_BEM.VATOMBAMENTO,
PATRIMONIO.TB_BEM.VAMATERIAL,
PATRIMONIO.TB_BEM.INCODIGOSETOR,
PATRIMONIO.TB_SETOR.VANOME AS NOMESETOR,
PATRIMONIO.TB_BEM.INCODIGOFORNECEDOR,
PATRIMONIO.TB_FORNECEDOR.VANOME AS NOMEFORNECEDOR,
PATRIMONIO.TB_BEM.DACHEGADA ,
PATRIMONIO.TB_BEM.DASAIDAPREVISTA,
PATRIMONIO.TB_BEM.DASAIDAEFETIVA,
PATRIMONIO.TB_BEM.VAMARCA,
PATRIMONIO.TB_BEM.VAMODELO,
PATRIMONIO.TB_BEM.VADESBAIXABEM,
PATRIMONIO.TB_BEM.INCODIGOTIPOAQUISICAO,
PATRIMONIO.TB_TIPOAQUISICAO.VANOME AS NOMETIPOAQUISICAO
FROM PATRIMONIO.TB_BEM , PATRIMONIO.TB_TIPOAQUISICAO, PATRIMONIO.TB_SETOR, PATRIMONIO.TB_FORNECEDOR
WHERE PATRIMONIO.TB_BEM.INCODIGOTIPOAQUISICAO = PATRIMONIO.TB_TIPOAQUISICAO.INCODIGOTIPOAQUISICAO
AND PATRIMONIO.TB_BEM.INCODIGOSETOR = PATRIMONIO.TB_SETOR.INCODIGOSETOR
AND PATRIMONIO.TB_BEM.INCODIGOFORNECEDOR = PATRIMONIO.TB_FORNECEDOR.INCODIGOFORNECEDOR
AND PATRIMONIO.TB_BEM.INCODIGOBEM LIKE ?
AND PATRIMONIO.TB_BEM.VATOMBAMENTO LIKE ?
AND PATRIMONIO.TB_BEM.VAMATERIAL LIKE ?
AND PATRIMONIO.TB_SETOR.VANOME LIKE ?
AND PATRIMONIO.TB_FORNECEDOR.VANOME LIKE ?
ORDER BY PATRIMONIO.TB_BEM.VATOMBAMENTO ASC
Why this problem is happing? Did you had some solution for that? Is the problem because the query is too long?!
please help me!
Gustavo Callou

Hello people,
I�m doing this to try to solution that bug:
This code is working fine... but I do not understand why I�m receiving the nullpointer exception!??!!?
// create a new rowset
CachedRowSetXImpl pkRowSet = new CachedRowSetXImpl();
try {
RowKey rk = tableRowGroup1.getRowKey();
if (rk != null) {
// set the rowset to use the Patrimonio database
pkRowSet.setDataSourceName("java:comp/env/jdbc/Patrimonio");
String query = "DELETE FROM TB_BEM WHERE INCODIGOBEM = "+tb_bemDataProvider.getValue("INCODIGOBEM", rk).toString();
pkRowSet.setCommand(query);
pkRowSet.setTableName("TB_BEM");
// execute the rowset -- which will contain a single row and single column
pkRowSet.execute();
pkRowSet.next();
info("Apagado");
} catch (Exception ex) {
log("ErrorDescription", ex);
error(getApplicationBean1().trateException(ex.getMessage()));
} finally {
pkRowSet.close();
Please someone help me!!!
Gustavo Callou

Adding Multiple Records with Express

Hello All,
We have a CRUD application written in Express 2.0 that allows users to
enter part numbers and associated information. Our part numbers are
structured as a prefix, alpha, suffix and 'M' or 'P' number variations :
1 AB 2 P3 for example. We have provided functionality to allow the
user to enter multiple P or M variations all at once, say 1 AB 2 P1 thru
P100,
using a dialog box where they enter the starting number, ending number
and step.
The problem comes in the AddRecordsToSave method.
This method correctly builds the array of BusinessClass needed to be
passed to the Save method, however, the Save method adds only the
initial record (the one from the original Express data entry screen)
to the database.
I have traced the problem to the BusinessClient.Update method called
from
Save. I believe I am missing some query information that should be
built into
AddRecordsToSave, but I am completely unsure of how to provide this.
As you can see in the attached code, we are using the LogAttr method to
post
changes. Apparently this is not enough. What am I missing here?
The InstanceStatus key of the added records is set to ST_EMPTY by
default....
I have tried forcing this to ST_UPDATE, only to receive an error that it
should
be ST_EMPTY......?? I am confused. If anyone can shed some light on this
for me,
I would appreciate it. Thanks for any help.
Scott Guman E-mail: [email protected]
IRM Analyst II Phone: (610) 709-2144
Mack Trucks, Inc. Fax: (610) 709-4713
Allentown, PA 18105

Hi There,
If attr is not specified in your LogAttr() call, the
BusinessClass
will be put in the update state but not attributes will
be logged.
That may be the reason why only the displayed record(
fetched from
the DB ) is getting logged, but not the new records.
I think you should use ATTR_SIMPLE with LogAttr. This
will cause
all the attributes to be logged and a proper query to
be built
to insert the newly created record. I am no Express
Guru,
but it works fine for me. Also, try not to modify
InstanceStatus directly.
Sometimes it might lead to inconsistencies. The online
help
The Add Records to Save example really helps.
Good luck!
Ajith Kallambella. M.
Forte Systems Engineer,
International Business Corporation
-----Original Message-----
From: Scott Guman [SMTP:[email protected]]
Sent: Wednesday, September 16, 1998 9:34 AM
To: 'Forte Users'
Subject: Adding Multiple Records with Express
Hello All,
We have a CRUD application written in Express 2.0 that
allows users to
enter part numbers and associated information. Our
part numbers are
structured as a prefix, alpha, suffix and 'M' or 'P'
number variations :
1 AB 2 P3 for example. We have provided functionality
to allow the
user to enter multiple P or M variations all at once,
say 1 AB 2 P1 thru
P100,
using a dialog box where they enter the starting
number, ending number
and step.
The problem comes in the AddRecordsToSave method.
This method correctly builds the array of BusinessClass
needed to be
passed to the Save method, however, the Save method
adds only the
initial record (the one from the original Express
data entry screen)
to the database.
I have traced the problem to the BusinessClient.Update
method called
from
Save. I believe I am missing some query information
that should be
built into
AddRecordsToSave, but I am completely unsure of how to
provide this.
As you can see in the attached code, we are using the
LogAttr method to
post
changes. Apparently this is not enough. What am I
missing here?
The InstanceStatus key of the added records is set to
ST_EMPTY by
default....
I have tried forcing this to ST_UPDATE, only to receive
an error that it
should
be ST_EMPTY......?? I am confused. If anyone can shed
some light on this
for me,
I would appreciate it. Thanks for any help.
Scott Guman E-mail:
[email protected]
IRM Analyst II Phone: (610) 709-2144
Mack Trucks, Inc. Fax: (610) 709-4713
Allentown, PA 18105
<< File: AddRecordsToSave.txt >>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Urgent: FORMS-III Deleting Multiple Records By Marking X

Deleting Multiple Records By Marking X
In Forms III, i need to delete multiple records by marking X (in non database Item)
i.e.
========================
D Empno Ename Deptno
========================
X 10001 ABC 10
10002 DEF 10
X 10003 GHI 20
X 10004 JKL 20
=======================
How To Do????????????
Rgds,
Rashad

Create a button say lable "delete" in a block other than the block from where u want to delete records.
suppose the block's name is emp_blk
now create a WHEN-BUTTON-PRESS trigger for delete button and write the following code
begin
go_block('emp_blk');
first_record;
loop
if :emp_blk.d ='X' then
delete_record;
end if;
if :system.last_record='TRUE' then
exit;
end if;
next_record;
end loop;
end;
filnally commit on save.

Deleting multiple records using ibatis framework

The code i am using is
String deleteArray[ ] = request.getParameterValues("sel");
String selected= " " ;
if(deleteArray ! = null){
for(int i = 0; i < deleteArray.length ; i++){
selected += deleteArray [ i ];
if( i < deleteArray.length - 1){
selected += "," ;
I am using sqlMapClient of ibatis for connecting to database
sqlMapClient.delete("deleteMultipleRecords",selected);
In my xml file i use
<delete id="deleteMultipleRecords" parameterClass="java.lang.String">
delete from ADDRESS where id in (#value#)
</delete>
When i execute the above code , the delete query is not executing.Can anyone help me out.

I dont think so u can delete multiple recods with a sing line of querey.
Why dont u use a for loop in DAO file and call the query with a single value ....

Multiple records with select option

i have to use select option in selection screen, which wl take the multiple values but that select option wont act as a range, the select option is a session name from sm35, the table from where data is retrieved is APQI, i have used a parameter before using select option ,like:
selection-screen begin of line.
parameters: P_grpid like apqi-groupid.
select-options: s_grpid like apqi-groupid.
selection-screen end of line.
AT-SELECTION SCREEN ON VALUE REQUEST FOR p-GRPID. " previous situation
{the code starts
FM F4 selection is called}
AT-SELECTION SCREEN ON VALUE REQUEST FOR S_GRPID-low. " CURRENT situation
FM F4 selection is called}
now when i give data in slection screen for s_grpid-low then it works as a parametr, but it doesnt take multiple values at s_grpid when i have alos mentioned the same for s_grpid-high.
Please tell me how to achive multiple records with select option, or u can also send a sample code if you have..
Thanks
Swarnali

Hello Swarnali,
You need to fill internal table of select-option once you got into the event AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
so sudo code will be:
AT SELECTION-SCREEN ON VALUE REQUEST FOR so_carr-LOW.
Select data from table.
so_carr-LOW = value
append so_carr.
You can also use NO INTERVAL to suppress the so_carr-HIGH value on selection screen.
Thanks,
Augustin.

Need to delete multiple records at a time

Hi,
My requirement is to delete multiple records at a time, i am using JDV11g and read only ADF table and rowSelection="multiple".
i have taken command button and invoking the below method.
RowKeySet rowKeySet = (RowKeySet)this.t1.getSelectedRowKeys();
CollectionModel cm = (CollectionModel)this.t1.getValue();
System.out.println("RowKeySet is: "+ rowKeySet.getSize());
for (Object facesTreeRowKey : rowKeySet) {
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData =
(JUCtrlHierNodeBinding)cm.getRowData();
System.out.println("RowData is : "+rowData.getAttribute("ParamValue7"));
rowData.getRow().remove();
Please do need full

Hi,
I don't understand what you mean by "+Please do need full+" , so I am ignoring this part. Here's a link that shows you best practices
http://blogs.oracle.com/smuenchadf/examples/
See example 134.
Frank
ps.: I suggest you bookmark the link

Delete Multiple records in Table?

Hi ..
I need to perform delete operation in my table with multiple selection.
My coding is..
for(int i=wdContext.nodeDetails2().size()-1;i>=0;i--)
if(wdContext.nodeDetails2().isMultiSelected(i) || wdContext.nodeDetails2().getLeadSelection()==i)
wdContext.nodeDetails2().removeElement(wdContext.nodeDetails2().getDetails2ElementAt(i));
When i delete first record, It works fine and multiple selection also works fine.
But when i select last record(only one) to delete, Then All the records get deleted. ???? Why this happens???
Anybody help to solve this probelm..
Thnx in advance..
Regards,
GS

Hi Sathish,
Store the node size in a variable then try. To avoid problems with the index, the context is executed in reverse. Suppose in a table you have 10 rows and you are deleting row 2 the after deletion of row 2 row 3 will come to row 2,row 4 will come in row 3 in this way process will be continue up to last row.
Try this.
int n = wdContext.nodeDetails2().size();
int leadSelected = wdContext.nodeDetails2().getLeadSelection();
// loop backwards to avoid index troubles
for (int i = n - 1; i >= 0; --i) {
if (wdContext.nodeDetails2().isMultiSelected(i) || leadSelected == i) {
wdContext.nodeDetails2().removeElement(wdContext.nodeDetails2().getDetails2ElementAt(i));
Regards,
Mithu

Update multiple records with update button???

I was wondering if someone could explain how I can use the developer tool box to update multiple records at once.
I have a repeat region with a title and a check box if the item is active. I would like to update all records of the table at once. I have see folks state the developer tool box can do this. However I am not sure how..
I am using php with mysql dreamweaver cs3

Hi Chris,
that can be done with first creating an ADDT "dynamic list", means to apply ADDT´s "Dynamic List Wizard" to an empty page -- this list will provide checkboxes for all displayed records, and here´s where you can select the to-be-updated (or deleted) records.
Besides creating the list, this wizard will also be creating a blank "form" php page in the same directory, which is by default "tied" to the created list -- you´ll just need to open this blank document with DW and apply ADDT´s "Create Dynamic Form Wizard" to it. However, this form will contain all required routines for single and multiple updates, depending on how many records you select in the list.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver

Delete multiple records with MDM WebService

Similar Messages

Maybe you are looking for