Delete row in OO ALV grid toolbar

Hello;
I am using OO ALV grid to display data. On the standard toolbar when delete row button is activated the relevant row is removed from the screen. The program catches this event only when Enter is pressed. Is it possible to catch it as soon as delete row is pressed?
Thx in advance.
Ali

Hi Ali,
You have to handle standard ALV toolbar. Even you can use Custom Toolbar. But you can handle it from Standard toolbar user command. Register events..
Thanks and Regards,
Sampath

Similar Messages

Multiple selection of e_ucomm in ALV Grid toolbar

Dear SAP friends,
I have created HR report.
On the selection screen the User enters some initial data and ALV Grid get displayed.
In event Handle_toolbar the program adds a custom button to standard ALV grid toolbar named "ABSENCE/ATTENDANCE".
In event handle_menu_button the program adds functions to this button.
Then in event handle_user_command depending on the function selected "e_ucomm" the program repopulates the ALV Grid.
METHOD handle_toolbar.
* Append a separator to standard toolbar
    CLEAR gs_toolbar.
    gs_toolbar-butn_type = 3.
    APPEND gs_toolbar TO e_object->mt_toolbar.
    CLEAR gs_toolbar.
    gs_toolbar-function = 'ABSENCE/ATTENDANCE'.
    gs_toolbar-icon      = icon_position_hr.
    gs_toolbar-quickinfo = 'Absence/Attendance Type'.
    gs_toolbar-butn_type = 2.               " 2-Menu type, 0-single button type
    gs_toolbar-disabled = space.
    APPEND gs_toolbar TO e_object->mt_toolbar.
ENDMETHOD.                    "handle_toolbar
METHOD handle_menu_button.
* Handle own menubuttons
    IF e_ucomm = 'ABSENCE/ATTENDANCE'.
     LOOP AT it_aa INTO it_aa_ln.
       MOVE it_aa_ln-type TO w-fcode.
      CONCATENATE   it_aa_ln-type '=' it_aa_ln-text
        INTO w-text
          SEPARATED BY SPACE.
      CALL METHOD e_object->add_function
        EXPORTING
          fcode = w-fcode
          text = w-text.
     ENDLOOP.
    ENDIF.
ENDMETHOD.                    "handle_menu_button
METHOD handle_user_command.
    MOVE e_ucomm TO w-abstype.
    PERFORM abs_att USING w-abstype.
ENDMETHOD.                    "handle_user_command
Is there a way to select more than one line or e_ucomm in other words at a time?
I would like to give my user a choice of let's say one report with three types of absences at a time rather than three reports with one type each.
Thanks,
Tatyana

The whole point of a toolbar button is to do a specific function.
What I would actually do here is in your menu button add another option say "User Choice" and when this is clicked throw up another screen say another ALV grid where the user can choose the various combinations or do it via a POPUP. A second grid IMO would be the best way to do it as the user can select easily specific rows.
You can either display the 2nd grid in a 2nd custom container on your main screen where you are showing the ALV grid or pass control to a new screen / program. Using a 2nd container is better as you still will have your instance of the original grid available.
Cheers
Jimbo

How can I trigger a USER_COMMAND for alv grid "toolbar" ???

Hi,
i have the standard ALV Grid "toolbar" and if i click to the Button "&LOCAL&COPY_ROW" than i want try to make a Refresh to my ALV Table in the Event "afteruser_command"_!!!!
Here is the implementation of my Event *"afteruser_command":*_
METHOD on_after_user_command.
........DATA: ls_stable TYPE lvc_s_stbl.
.....CASE e_ucomm.
.....WHEN '&LOCAL&COPY_ROW'.
........MESSAGE 'LOCAL_COPY_ROW' TYPE 'S' DISPLAY LIKE 'E'.
........ls_stable-row = 'X'.
........ls_stable-col = 'X'.
........CALL METHOD gr_grid_d0100->refresh_table_display
..............EXPORTING
.......................is_stable = ls_stable
..............EXCEPTIONS
.......................finished = 1
.......................OTHERS = 2.
......ENDCASE.
ENDMETHOD.
But it doesnt work.
Is there another function code for the Copy Button????
Thanks
Ersin

Hello Ersin,
the events "after_user_command", "before_user_command" and "user_command" will not be fired when selecting this command!
In my opinion, there is no solution, to fire these events, using this alv-function!
But there is a trick:
1. Register on the event "toolbar" with an own method:
 toolbar_own for event toolbar of cl_gui_alv_grid
 importing e_object
 e_interactive,
In this method change the function code of "&LOCAL&COPY_ROW", but don´t change the row of the entry, because the button should appear on the same place in the toolbar:
 field-symbols: <ls_toolbar> type stb_button.
 read table e_object->mt_toolbar with key function = '&LOCAL&COPY_ROW'
 assigning <ls_toolbar>.
 if sy-subrc = 0.
 <ls_toolbar>-function = 'COPYROW_OWN'.
 endif.
2. Register on the event "user_command" ( I think, that´s clear ):
 user_cmd_own for event user_command
 of cl_gui_alv_grid
 importing e_ucomm,
( don´t forget the set handler-commands for both events:
set handler po_alv_own->user_cmd_own for po_alv_own.
set handler po_alv_own->toolbar_own for po_alv_own. )
3. Now you can react in the method "user_command" on your own function code:
 case e_ucomm.
 when 'COPYROW_OWN'.
 perform copy_row using me
 changing gt_bis_cf_out.
Sample code for copying the current line:
FORM COPY_ROW using po_alv_own type ref to gcl_alv_own
 changing pt_table_alv type gt_table_alv_t.
data: l_index type i,
 ls_table_alv type gs_table_alvt_t.
call method po_alv_own->get_current_cell
 importing
 e_row = l_index.
* e_value =
* e_col =
* es_row_id =
* es_col_id =
* es_row_no =
"read the current line:
read table pt_table_alv index l_index
 into ls_table_alv_out.
"some changes for the new row:
clear: ls_table_alv-style,
 ls_table_alv-tabix.
"insert the new line:
add 1 to l_index.
insert ls_table_alv into pt_table_alv index l_index.
po_alv_own->refresh( ).
ENDFORM. " COPY_ROW
In this manner the events "after_user_command", "before_user_command" are fired, too!
For information: My problem was, that the ALV-function copied the style-information too, so in the new line, some fields are not editable. At least his field must be cleared!
Best regard
Thomas Scheuermann

Anything other than buttons on ALV Grid toolbar?

Does anyone know if anything other than buttons can be placed on a ALV Grid toolbar, eg. a piece of text or an input field? The filter button for data selection may be too cumbersome/slow for a call centre operator; I want to have a display field with a dropdown identifying a data field and an input field to accept a value on which to select.

may be you can do some thing like this..instead of having a input field on the toolbar. have an input field above the ALV grid(this is applicable only when you are using Object Oriented ALV).
| input field : ________________ |
|__________________________________|
| ALV GRID OUTPUT |
|__________________________________|
you can have a button along with input field also. enter the value in it, and press enter . in the enter handling fetch all the data. and display in the ALV grid.
in the screen fiest create input field, and button, then place the custom control. on the custom control you place the grid.

Urgent : how to select the rows in the ALV Grid Control

How to select the rows in the ALV Grid control,
I am facing the situation where i need to select the row/rows in the Grid control and then to lock the entries,
If anyone have the solution please help me out
Its very Urgent

Hi Bharath,
Go through this hope u can understand.
SEL_MODE. Selection mode, determines how rows can be selected. Can have the following values:
A Multiple columns, multiple rows with selection buttons.
B Simple selection, listbox, Single row/column
C Multiple rows without buttons
D Multiple rows with buttons and select all ICON
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
 IMPORTING
 et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
 CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
 EXPORTING
 textline1 = 'You must choose a valid line'.
 EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
 READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
 ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
 CALL METHOD go_grid->set_selected_rows
 exporting
 it_index_rows = gi_index_rows.
ENDIF.
Reward points if helpful.
Thanks
Naveen khan

Row Selection in ALV Grid created using CL_GUI_ALV_GRID

Hi,
I have ALV grid using cl_gui_alv_grid. I want to capture the row selection and display the selected rows in 2nd ALV grid (using cl_gui_alv_grid).
Method CALL METHOD Grid->get_selected_rows giving right no. of selected records first time and process these records by POST button and hence shows these records in next alv grid. but when i came back to 1st ALV by pressing BACK button on 2nd ALV then if I again select records on the same 1st ALV grid the same Method CALL METHOD Grid->get_selected_rows fires again. but this times it wouldn't give the selected records. I mean first time this gives me correct no. of selected records but 2nd time wouldn't.
how do I capture the row selection.?
Kindly suggest me. helpful answer will be appreciated.
Thanx in Advance.
Robin

Hi,
Write this code, you have to free the container.
MODULE user_command_0101 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
       c_container->free( ).
       c_container1->free( ). " this is the container of secondary list.
       clear: r_grid, r_grid1, c_container, c_container1.
      LEAVE TO SCREEN 100.
ENDCASE.
Regards and Best wishes.

Adding a color to row of a alv grid using function modules

Can anybody clearly explains me how to add a color to a row to an alv grid using function module reuse_alv_grid_display.
thanks in advance
regards
anil.

hi,
chk this ample pgm
report zxyz_0004
 no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
 matnr type mara-matnr,
 mtart type mara-mtart,
 maktx type makt-maktx,
 color_line(4) type c,
 tcolor type slis_t_specialcol_alv, "cell
 end of imara.
data: xcolor type slis_specialcol_alv.
start-of-selection.
perform get_data.
perform write_report.
Get_Data
form get_data.
imara-matnr = 'ABC'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for ABC'.
append imara.
imara-matnr = 'DEF'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for DEF'.
append imara.
imara-matnr = 'GHI'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for GHI'.
append imara.
loop at imara.
 if sy-tabix = 1.
 imara-color_line = 'C410'. " color line
 endif.
 if sy-tabix = 2. "color CELL
 clear xcolor.
 xcolor-fieldname = 'MTART'.
 xcolor-color-col = '3'.
 xcolor-color-int = '1'. "Intensified on/off
 xcolor-color-inv = '0'.
 append xcolor to imara-tcolor.
 endif.
 modify imara.
endloop.
endform.
WRITE_REPORT
form write_report.
data: layout type slis_layout_alv.
layout-coltab_fieldname = 'TCOLOR'.
layout-info_fieldname = 'COLOR_LINE'.
perform build_field_catalog.
CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 is_layout = layout
 it_fieldcat = fieldcat
 tables
 t_outtab = imara.
endform.
BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Type'.
fc_tmp-fieldname = 'MTART'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '4'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-emphasize = 'C610'. " color column
append fc_tmp to fieldcat.
endform.
anil , pls chk this link also.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm
very hlpful.
rgds
anver
pls mark points if ur issue solved
Message was edited by: Anversha s
Message was edited by: Anversha s

How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

Multiple values in row in an alv grid

Hi experts,
I have to display data through alv grid control. The problem is I have multiple values in a row for one one field.
How should i display the data for this field in an ALV.
I need to display data like the fomatt:
field1   field2    field3    field4
1           2            5           6
             3
             4
7           8           12          13
             9
            10
            11

Hi,
first ur getting data like for 1st field having one itab with common field (eg) belnr is common field 1st field is (BLART) and 2nd field contain another itab with common field like that 3rd upto 4.
In that common loop itself you have to find which field having more records use the code like
itab1[] = gv_itab[]."pass the 1 field itab to another itab.
DELETE TABLE itab1 WITH TABLE KEY fieldname NE field value. " delete without common value.
DESCRIBE TABLE itab LINES li."1 field internal table
like that you have to do 4 fields itab.
Which is having more record loop the field itab table and use read statement for rest of field itab
and use append statement for getting final itab.
regards,
Dhina..
Edited by: Dhina DMD on Jun 16, 2011 1:17 PM

Undo deleting rows in Editable ALV

Hi All,
i have to check something (at event data_changed of cl_gui_alv_grid), after the user click delete row in an editable ALV. If any expression is true, then the deleted row should not be deleted, it should be undo.
Have anyone a idea to undo this deleting-function.
Best regards
Andreas

hi,
SAP provides provision for overwriting the functionality of standard buttons displayed in the ALV. You have write a subroutine in which your code has to be executed. That subroutine will be executed during the runtime,
when a standard button has been clicked.
if you are using the function module to display the data, you have to pass the program name to I_CALLBACK_PROGRAM ,subroutine name to I_CALLBACK_USER_COMMAND. Refer below code.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
* I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND1'
i_callback_top_of_page = 'TOP_OF_PAGE'
* I_BACKGROUND_ID = 'ALV_BACKGROUND'
i_grid_title = i_title_vbfa
is_layout = i_layout
it_fieldcat = i_fldcat[]
it_sort = i_sort
it_events = i_event
TABLES
t_outtab = it_so1
FORM user_command1 USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
*CASE R_UCOMM .
* WHEN '&IC1' .
* IF rs_selfield-FIELDNAME = 'VBELN' .
* ENDIF .
* WHEN OTHERS .
* ENDCASE .
CLEAR wa_so.
REFRESH: it_del1 .
IF r_ucomm = '&IC1' AND rs_selfield-fieldname = 'VBELN' AND
rs_selfield-value IS NOT INITIAL.
READ TABLE it_so1 INTO wa_so INDEX rs_selfield-tabindex.
IF sy-subrc = 0.
LOOP AT it_vbfa INTO wa_vbfa WHERE vbelv = wa_so-vbeln
AND posnv = wa_so-posnr.
READ TABLE it_del_ful INTO wa_it_del_ful
WITH KEY vbeln = wa_vbfa-vbelv
posnr = wa_vbfa-posnn.
IF sy-subrc = 0.
CLEAR wa_del.
MOVE wa_it_del_ful TO wa_del.
APPEND wa_del TO it_del1.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
********* SECOND ALV GRID DISPLAY ***********************************
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
* I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND2'
i_callback_top_of_page = 'TOP_OF_PAGE'
* I_BACKGROUND_ID = 'ALV_BACKGROUND'
i_grid_title = i_title_vbpa
it_fieldcat = i_fldcat2[]
it_sort = i_sort
TABLES
t_outtab = it_del_ful
* IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
* ENDIF.
ENDFORM . "USER_COMMAND1
Regards,
Veersh
Edited by: veereshbabu ponnada on Feb 11, 2009 3:04 PM

Get Row Data from a selected Row in an ALV Grid

Hello,
I create a Custom Control from an intern table. When i do a double click on a row, i call another dynpro. The data of the marked line should be written into an internal table.
How i implement this?
I tried things like:
Call method alv_list->GET_SELECTED_ROWS_BASE
or
Call method alv_list->GET_SELECTED_ROWS

Hi Sebastian,
    For a double click event we need to register the double click event which goes the following way.
data: lref_alv type ref to cl_gui_alv_grid.
* after initializing ALV
SET HANDLER gref_application->handle_alv_dblclik FOR lref_alv.
Now this double click event needs to be handled in the local class.
eg:
CLASS lcl_application DEFINITION.
PUBLIC SECTION.
    METHODS:
* Method to handle double click on ALV grid.............................
      handle_alv_dblclik
                    FOR EVENT double_click
                           OF cl_gui_alv_grid
                    IMPORTING e_row
                              e_column
                              es_row_no.
endclass.
CLASS lcl_application IMPLEMENTATION.
*           Method: HANDLE_ALV_DBLCLICK                                *
*           Text: Event triggers when ALV grid is double clicked       *
*    -->e_row                                                          *
*    -->e_column                                                       *
*    -->es_row_no,                                                     *
METHOD handle_alv_dblclik.
    data: lv_value(40) TYPE c.
   * Get the value of the current cell double clicked......................
    CALL METHOD gref_alv->get_current_cell
      IMPORTING
        e_value   = lv_value
* here you can insert the values in the internal table
endmethod.
endclass.
hope this helps.
Regards,
Kinshuk

ALV grid toolbar - standard download to excel error

Hi Experts,
In my ALV grid report, when i click on the standard ALV toolbar to download the output to excel file, the data gets downloaded fine execpt for one field called serial number. It is of size 18 chars.
The last number on this field is getting truncated when it is downloaded to excel. Only 17 characters is being shown. There is no output lenght specification in the field catalog. The column width optimize property is also not set. Any ideas on what might be the problem?
Cheers

Hi,
Check this link:
Re: Digit missing in the alv export
Hope this helps.
Regards,
Satish Kanteti

How to disable the first row of an ALV Grid?

Hi All,
      I am working on a module pool programme. I am displaying ALV grid. I have to give some default values in the first row and disable it. I have to disable the third column and fourth row value. How can i achieve this?
Help will be appreciated.
Thanks,
Ibrahim.

here is the code i have written....but its not working...
TYPES : BEGIN OF tp_grid,
        fname(25)   TYPE c,
        reqd,
        seqno       TYPE n,
        tl_styl TYPE lvc_t_styl,
        edit,
        END OF tp_grid.
DATA : wl_styl TYPE lvc_s_styl.
DATA : wl_layout TYPE lvc_s_layo.
DATA : lt_celltab TYPE lvc_t_styl.
READ TABLE tl_grid INTO wl_grid INDEX 1.
wl_styl-fieldname = 'TAG NUMBER'.
wl_styl-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT wl_styl INTO TABLE lt_celltab.
INSERT LINES OF lt_celltab INTO wl_grid-tl_styl index 1.
MODIFY tl_grid INDEX 1 FROM wl_grid.
wl_layout-stylefname = 'TL_STYL'.
CALL METHOD l_initgrid->set_table_for_first_display
    EXPORTING
      is_layout                     = wl_layout
    CHANGING
      it_outtab                     = tl_grid
      it_fieldcatalog               = tl_init_fcat
    EXCEPTIONS
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      OTHERS                        = 4.
ENDFORM.                    " display_initgrid
Help will be appreciated....
Thanks,
Ibrahim

How to decrease the row height in ALV Grid (OOPS).

HI Experts,
I have displayed ALV Grid using CL_GUI_ALV_GRID=>SET_TABLE_FOR_DISPLAY.
I want to decrease the row height and width.
Can any one suggest how to do this?
Regards,
Kumar.

Hi Kumar,
Row height it predefined and you won't change it, but you can adjust column width.
For that use field COL_OPT of layout structure ( type LVC_SLAYO ) to optimize all columns width, or set explicit width using field catalog, setting field OUTPUTLEN for certain column.
Regards
Marcin

Visibility of ALV grid toolbar functions of the Custom report in ITS screen

Hi all,
I am working on SRM 5.0 with INTERNAL ITS.I have created a custom report and a transaction code for the same.Now in the SRM Web menu,I have provided a link for this report.
The problem I am facing is that in the O/P screen of the report,I have an ALV grid being displayed with 1 custom icon at the end of the std ALV toolbar.Now in the SAPGUI,this icon is displayed correctly at the end of the ALV toolbar but in the Web screen,i can see only few of the functions(visible as buttons in the SRM web screen/IE) in the ALV toolbar and rest of them being displayed under an additional button "MORE".Is there any way i can show the custom icon as a button which is directly visible on the SRM web screen and not under the options MORE?
All inputs will be highly appreciated and rewarded.

Hello!
There are several possibilities how to call transaction:
- You can call it as service (that is what you do when you test it from SICF)
- You can call it through service (or alias) WEBGUI (not using service for the specific transaction to call it)
If you are calling it through WEBGUI then parameter ~SINGLETRANSACTION should be added to service (or alias) of WEBGUI. And there should be added also Log Off URL (in SICF). At this case it should navigate back to the URL which is specified in SICF.
Hope this helps!
Best regards,
Rorijs

Delete row in OO ALV grid toolbar

Similar Messages

Maybe you are looking for