Delete too slow, need selective truncate...

We are trying to delete approx 60,000 rows from a wide table. Using the delete command with proper indexes is still too slow.
Unfortunately there is still more data that needs to remain there, so a truncate will no work. Ideally I am looking for a way of doing a selective truncate.
Habing the selectiveness of using the delete command, but bypassing the rollback segment like the truncate command.
Any help would be greatly appreciated,
please email me with your thoughts and comments.
[email protected]

Please excuse the crappy punctuation, I cut this out of a pdf document on the web. You may be able to partition along delete lines and then truncate a partition as suggested below.
Gool Luck, Kevin
In Oracl e8 there are some new options avail abl e in the ALTER TABLE statement
that al l ow you to perform maintenance on t he partitions. With these options
yo u c an ADD, MOVE, DROP, TRUNCATE, and SPLIT partitions.
null

Similar Messages

Way too slow - need help!

I am tearing my hair out after installing/uninstalling/reinstalling both CS4 and CS5 on two different computers with the same results -- 30 seconds to make something bold? 20 seconds to delete text? Why is it running so unbearably slow?
I have WAY more than the minimum system requirements, so I know that isnt the problem. Have called support line but been on hold for too long.
Does anyone have any suggestions? Are there any settings or options that i could look into that might make the program run faster? i have spent hours and hours trying to get it to work correctly with no luck.

Let's slow down and begin at the start:
PC or Mac?
Which operating system?
What exactly are your system specs? Way more than minimum doesn't tell us much.

Submit Program - Copy works too slow when selecting XMLP program

Hi
Whenever I try to submit new concurrent program using copy button, if i select xmlp program, it almost kills the instance and takes lot of time ( at least 4-5 mins) before populating parameters etc whereas for non XMLP programs, it populates instantly. I did some RnD and found that the moment layout is linked to conc program, copying becomes slow.
Is it problem only I am observing or it is a general issue? I have tried this on 4-5 different instances and everywhere having same problem.
Regards
Varun

First of all i would like to thank you for all your answers!
I tryed all the sollution you proposed but nothing has really changed it speed.
1° The loops are not running in parallel, would it be faster if they were ? how do i make them run in parallel ?
2° the sequence structure was indeed reduntant, everything work nicely even without it!
3° closing the Visa sources after the loop doesn't make the program executes faster..
4° 3 seperate loops instead of one doesn't make a huge difference ...
5° Waits/Delays doesn't make the system faster (or maybe i didn't know how to use it propoerly!)
6° What do you mean by "convert the Express vi's to DAQmx code and work from there" ??
i have no ideas how i'll solve this problem, any comment or remark are very welcom !
Thank you again for your help!
Yanis

[SOLVED] 3D too slow, need help to find out why

Hi folks.
I tend to compile and use mesa from git. Most of the time I have no problems, but recently it all got screwed up. Everything was running fine, until suddenly, after an update, I could not play games anymore. Native or Win games using wine. They're just to slow. Like, 1 frame per 3-4 seconds. I've tried different kernel versions, different mesa versions, I inspected pacman.log trying to find what could be the reason of this. Nothing. Just to note, applications like Stellarium, for example, runs just fine (with vsyncing off it can achieve over 150 FPS), kwin effects run fine, video playback is perfect. But, as soon as I start a game like "World of Goo", or "Counter Strike" using wine - barely 1 fps. I have absolutely no idea what could be the cause of this. Please help!
Btw. all the logs are not displaying anything unusual.
Edit: using r600g (Gallium driver).
Last edited by Demon (2011-07-21 19:48:56)

Demon wrote:applications like Stellarium, for example, runs just fine (with vsyncing off it can achieve over 150 FPS), kwin effects run fine, video playback is perfect.
64 bit.
Demon wrote:But, as soon as I start a game like "World of Goo",
32 bit?
Demon wrote:or "Counter Strike" using wine
32 bit!
Demon wrote:Btw. all the logs are not displaying anything unusual.
Try
LIBGL_DEBUG=verbose glxinfo | grep render
That output should be fine.
Try
LIBGL_DEBUG=verbose wine foobar.exe
and pay attention to the first few lines where it loads the driver. It should succeed with some driver from /usr/lib32/...
If this is so, then try
LIBGL_DRIVERS_PATH=/usr/lib32/xorg/modules/dri wine foobar.exe
If it then works, then simply your path is wrong.
All that is assuming that you run 64 bit and have lib32-mesa-full etc. upgraded too.

Insert or Update Item Master is too slow

Dear Expert,
I have a problem in add or update Item Master Data. When I click Add/Update, the process saving is too slow (need more than 5 minutes). This condition appear yesterday. In 2 days ago process add/update item master data normal.
But the others transaction like business process, transaction is normal.
I have did shrink database in SQL, but not help.
Does anybody help my problem? how should I do?
Thank you before help me

Hi pak Hendra,
May I know how much is your livedb size now ? If it is still slow after reindexing, you may consider to do these followings suggestions:
1. Increase your server hdd size
2. Increase your server's processor
3. cut off and do new opening balance
Is the problem happened in branch/outlet ? do you use citrix to access the server from branch ? Of course you can reindex the db to solve this issue but it is not the only one solution. You must also concern about the connection.
Rgds,
JimM@sbo_knowledge_village

Forall bulk delete is too slow to work,seek advice.

I used PL/SQL stored procedure to do some ETL work. It is pick up refeshed records from staging table, then check to see whether the same record exists in target table, then do a Forall bulk deletion first, then do a Forall insert all refreshed records into target atble. the insert part is working fine. Only is the deleteion part, it is too slow to get job done. My code list below. Please advise where is the problem? Thansk.
Declare
TYPE t_distid IS TABLE OF VARCHAR2(15) INDEX BY BINARY_INTEGER;
v_distid t_distid;
CURSOR dist_delete IS
select distinct distid FROM DIST_STG where data_type = 'H';
OPEN dist_delete;
LOOP
FETCH dist_delete BULK COLLECT INTO v_distid;
FORALL i IN v_distid.FIRST..v_distid.LAST
DELETE DIST_TARGET WHERE distid = v_distid(i);
END LOOP;
COMMIT;
end;
/

citicbj wrote:
Justin:
The answers to your questions are:
1. why would I not use a single DELETE statement? Because this PL/SQL procedure is part of ETL process. The procedure is scheduled by Oracle scheduler. It will automatically run to refresh data. Putting DELETE in stored procedure is better to executed by scheduler.You can compile SQL inside a PL/SQL procedure / function just as easily as coding it the way you have so that's really not an excuse. As Justin pointed out, the straight SQL approach will be what you want to use.
>
2. The records in dist_stg with data_type = 'H' vary by each month. It range from 120 to 5,000 records. These records are inserted into target table before. But they are updated in transactional database. We need to delete old records in target and insert updated ones in to replace old ones. But the distID is the same and unique. I use distID to delete old one and insert updated records with the same distID into target again. When user run report, the updated records will show up on the report. In plain SQL statement, delete 5,000 records takes about seconds. In my code above, it take forever. The database is going without any error message. There is no trigger and FK associated
3. Merge. I haven't try that yet. I may give a try.Quite likely a good idea based on what you've outlined above, but at the very least, remove the procedural code with the delete as suggested by Justin.
>
Thanks.

Safari too slow to load a page, need help

Hi mi name is roberto carlos and i really need help please. Since a time ago my SAFARI has become too slow that i can see the difference. I don't know what to do with it. Please somebody help me, how do i fix it.
Thanks.
Message was edited by: robertinho

Hi Roberto and welcome to the forums!
Try this:
The following usually works on both Tiger and Leopard:
(First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl.)
Many, including me, have had success with adding DNS codes to their Network Settings, with good results in terms of speed-up:
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
208.67.222.222
208.67.220.220
Click on Apply Now and close the window.
Restart Safari, and repair permissions.
If that didn't do it, then try this as well:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions (in Disk Utility).
Start up Safari again, and things should have improved.
Less likely, but possible, is that the slowness is caused by a Trojan such as the one called 'DNSChanger' or 'OSZ.RSPlug', which can alter the DNS settings of your network connection. This particular Trojan can be inadvertently installed if you have come across certain Quicktime movies where got a window stating that you have to download and install a particular codec in order to see the video.
If you have agreed to that installation, your system can be infected and your DNS settings altered, which results in your system using the wrong DNS servers, which can slow web surfing to a crawl.
This can be fixed by downloading and running a freeware utility called DNSChanger Removal Tool which you can download from here:
http://www.versiontracker.com/dyn/moreinfo/macosx/33696
Once you have run that utility you have to re-boot your Mac, then reset Safari, and re-enter your DNS settings in System Preferences/Network.

Query is too slow from bseg selection

SELECT BELNR BLDAT BUDAT XBLNR GJAHR tcode WAERS AWKEY FROM BKPF INTO
TABLE
ITBKPF WHERE BUKRS EQ P_BUKRS AND BELNR IN S_BELNR AND BUDAT IN
    P_BUDAT
    AND STBLG = ''
    AND ( TCODE = 'MIRO' OR
                         TCODE = 'MR8M' OR
                         TCODE = 'MB11' OR
                         TCODE = 'MB1B' OR
                        TCODE = 'MIGO_GI' OR
                        TCODE = 'MIGO_TR' OR
                         TCODE = 'MB1A' ).
   IF SY-SUBRC EQ 0.
          SORT itBKPF.
        ELSE.
          MESSAGE 'No data for the relevant date' TYPE 'A'.
         LEAVE LIST-PROCESSING.
        ENDIF.
SELECT A1LIFNR A1NAME1 A1ORT01 A1STRAS B1~j_1icstno
INTO TABLE it_werks
FROM ( LFA1 AS A1 INNER JOIN j_1imocomp AS B1 ON A1werks = B1werks )
**********************************************this is too slow*************
SELECT BUKRS BELNR GJAHR BUZEI BUZID BSCHL SHKZG GSBER MWSKZ
        DMBTR HKONT LIFNR LANDL Matnr werks MENGE EBELP xref3
        INTO CORRESPONDING FIELDS OF TABLE ITABBSEG
        FROM BSEG
        FOR ALL ENTRIES IN ITBKPF
        WHERE BELNR = ITBKPF-BELNR
        AND GJAHR = ITBKPF-GJAHR
        AND ( BSCHL = '86' OR BSCHL = '96' or BSCHL = '89' OR BSCHL = '99' )
        AND WERKS IN S_WERKS
        AND BUZID <> 'F' .
****************************************this is too slow
Moderator message: Please Read before Posting in the Performance and Tuning Forum
locked by: Thomas Zloch on Aug 5, 2010 2:08 PM

You should have provided the full key of the cluster file behind BSEG (RFBLG), every key is in BKPF, so add BUKRS
SELECT bukrs belnr gjahr buzei buzid bschl shkzg gsber mwskz
       dmbtr hkont lifnr landl matnr werks menge ebelp xref3
INTO CORRESPONDING FIELDS OF TABLE itabbseg
FROM bseg
FOR ALL ENTRIES IN itbkpf
WHERE bukrs = itbkpf-bukrs
    AND belnr = itbkpf-belnr
    AND gjahr = itbkpf-gjahr
    AND ( bschl EQ '86' OR bschl EQ '96' OR bschl EQ '89' OR bschl EQ '99' )
    AND werks IN s_werks
    AND buzid EQ 'F' .
You could also extract the whole accounting document in the internal table, and then delete record using the not-database-key selections.
SELECT bukrs belnr gjahr buzei buzid bschl shkzg gsber mwskz
       dmbtr hkont lifnr landl matnr werks menge ebelp xref3
INTO CORRESPONDING FIELDS OF TABLE itabbseg
FROM bseg
FOR ALL ENTRIES IN itbkpf
WHERE bukrs = itbkpf-bukrs
    AND belnr = itbkpf-belnr
    AND gjahr = itbkpf-gjahr.
DELETE itabbseg WHERE
( bschl NE '86' AND bschl NE '96' AND bschl NE '89' AND bschl NE '99' )
OR NOT ( werks IN s_werks )
OR BUZID NE 'F' .
In both case, perform some tests with tools like SE30 or ST05.
Regards,
Raymond

Select Data from aufm too slow

Hi experts,
I have a query in my report but its performance too slow.
is there any proper way or any way to improve the performance of below query.
SELECT * FROM aufm     into table i_aufm          " collecting input material document numbers
         WHERE mblnr GE '4900000000'
           AND mjahr GE '2008'
           AND zeile GT '0'
           AND matnr EQ matnr_101-matnr
           AND werks IN p_werks
           AND charg EQ matnr_101-charg
           AND bwart = '101'.

Hi,
1 .Dont use * from any table.
2. Create a internal table that u want to retrieve the data from that table. (Structure).
Eg:
types : begin of str_ekko,
           ebeln type ekko-ebeln,
           bsart type ekko-bsart,
           aedat type ekko-aedat,
           endof str_ekko.
data : itab type table of str_ekko,
        wa_itab type str_ekko.
In the above u want to take care that while creating the structure u want to look the sequence of fields in the table. in the same sequence u want to create the structure.
3 . The Select-options fields also wants be in the same field sequence of the table.
eg : select ebeln bsart aedat from ekko into table itab where ebeln in so_ebeln and
bsart in so_bsart and
                                                                                aedat in so_aedat.
4. If the above things are not working just look the indexes of that table. Just create a secondary index with ur requirement.

What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

What cable do I need for a full migration from a 2011 MacBook Pro to a new current one-wireless migration way too slow.?

All you need is an Ethernet cable.
Just plug it into both machines. Don't bother with a crossover cable, just a plain old Ethernet cable will do. The Ethernet ports on the Macs are smart and will adjust appropriately.

HT1338 I need to update to Lion and then Mountain Lion, but I need a CD or other means to update as my internet is too slow and I have a GB limit. Is this possible?

I need to update to Lion and then Mountain Lion, but I need a CD or other means to update as my internet is too slow and I have a GB limit. Is this possible?

Thanks for your response. I was told, obviously misinformed, that you needed to dl Lion prior to Mountain Lion, so thanks for clarifying that. I cannot dl from the internet as it is too slow and I have limited GB per month. I know, at one point, you could purchase a jumpdrive with Lion for those of us who have this problem or no internet access. I will check into that via Apple or try to borrow internet service from a friend and move my computer there.
Thanks again.

I need to make a stop start animation using iMovie. I need the time factor to be 0.03. Every time I make an adjustment it goes to 0.1s which is too slow. Does anyone have a suggestions?

I need to make a stop start animation using iMovie. I need the time factor to be 0.03. Every time I make an adjustment it goes to 0.1s which is too slow. Does anyone have a suggestions?

First, for Stop Motion Animation, there are better tools. These include iStopMotion and QuickTIme Pro Version 7.
If you want to do it in iMovie, it is possible, but slow.
First, go into iMovie Preferences, and make sure you check "Display Time as hh:mm:ss:frames". This will let you edit to the frame lever rather than to the nearest 10th of a second.
Second, see this Tutorial by Jon Walker on how to edit down to a single frame in a still image sequence.
You can modify his technique to get 2 or three frames.

Disk too slow - this is driving me nuts, I need help.

Before you tell me to search: I DID SEARCH. Didn't find a direct answer. I need (if at all possible) a step-by-step solution from you experts out there.
Situation:
Logic Pro 9 version 9.1.1 (1697.53) in 64bit mode
16 audio channels via firewire
External HD via eSata express card (3Gb)
XBench results:
Score: 80.33
OS: 10.6.4 (10FS69)
RAM: 4096
Model: MacbookPro 5,2
Drive Type: WDC WD10EAVS-00M4B0
Disk Test: Sequential = 125.35 and Random = 59.10
What can I do to resolve the "disk too slow" issue? Recording will stop in the middle of the take, that can't happen... I'm ******* musicians off with this issue. HELP PLEASE....

You might find it helpful to run this benchmark. You can get a sense of how your machine compares with similar machines. This might help you diagnose if there's something wrong with your system.
And it seems counter-intuitive, but I think you should do a test where you record to your system disk.
You should also keep an eye on Activity Monitor to get a sense of other things your Mac might be doing without you being aware of it.

Converting NTSC to PAL in CS5, the audio is out of sync-too slow. What do I need to adjust?

Hi. I had to purchase a new Sony video camera in USA (NTSC 29.9fps). We are PAL, so most of my holiday movie is PAL 16:9 widescreen. When I imported the clips from the NTSC camera, I converted the clips to PAL 25fps but the audio is out of sync and appears to be too slow. eg. a male voice is high pitched and not quite audible. Is it the 'bit rate' difference causing the problem and if so, how do I change that in CS5? The PAL clips off my old camera are imported as MPG files. The new camera files are MTS. I am not sure if this is important but would appreciate some help. Thanks.

Adobe doesn't have any tools that perform adequate NTSC<=>PAL conversions, in my view. You may be better off creating a separate video for the NTSC stuff, keeping it as NTSC. Your player should be able to handle it fine.

New iMac running 10.10.1 frequently pauses, way too slow

I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everything seems much slower than it should. Safari downloads take forever, compared to Firefox. I ran an EtreCheck report pasted below. I tried some easy fixes like removing desktop clutter, reducing transparency, but that doesn't affect the overall slowness. Any solutions welcome!
Problem description:
Installed Yosemite on new iMac, migrating from snow leopard on an older macbook pro. Instead of being fast, processes frequently pause for bit while the beachball spins, then resume. Way too slow, much slower than my old macbook pro.
EtreCheck version: 2.0.11 (98)
Report generated November 24, 2014 at 5:06:30 PM EST
Hardware Information: ℹ️
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.2 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 755M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:7:57
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (749.24 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital Ext HDD 1021 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Time Machine New (disk2s2) /Volumes/Time Machine New : 2.00 TB (193.57 GB free)
Seagate Expansion Desk 2 TB
S.M.A.R.T. Status: Verified
NewArchive (disk3s1) /Volumes/ NewArchive : 2.00 TB (11.39 GB free)
Western Digital Ext HDD 1021 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Bootable Backup New (disk1s2) /Volumes/Bootable Backup New : 500.10 GB (254.99 GB free)
Storage New (disk1s3) /Volumes/Storage New : 499.62 GB (480.72 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
[loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d13) Support
[not loaded] com.fklt.driver (1.8.0) Support
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
/System/Library/Extensions/InstantOn.kext/Contents/PlugIns
[not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/Volumes/Bootable Backup New/Applications/ CD burn & label ƒ/Toast 8.0.5 Titanium ƒ/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (1.7) Support
/Volumes/Bootable Backup New/Applications/ Multimedia ƒ/TuneClone ƒ/TuneClone.app
[not loaded] com.tuneclone.driver.TuneClone_Virtual_CDWriter (1.0.0d1) Support
/Volumes/Bootable Backup New/Applications/ My Utilities ƒ/Little Snitch 2.2 ƒ/Little Snitch Installer.app
[not loaded] at.obdev.nke.LittleSnitch (2.2.05) Support
/Volumes/Bootable Backup New/Applications/Cloak.app
[not loaded] com.bourgeoisbits.cloak.tun (1.0.1) Support
/Volumes/Bootable Backup New/Applications/Utilities/DiskWarrior ƒ/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.2) Support
Startup Items: ℹ️
NoteburnerService: Path: /System/Library/StartupItems/NoteburnerService
M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[loaded] com.avira.antivirus.general.agent.plist Support
[loaded] com.avira.antivirus.ipm.ui.plist Support
[failed] com.avira.antivirus.notifications.agent.plist Support
[loaded] com.avira.antivirus.odscan.default.plist Support
[loaded] com.avira.antivirus.scheduler.agent.plist Support
[running] com.avira.antivirus.systray.plist Support
[loaded] com.avira.antivirus.telemetry.agent.plist Support
[loaded] com.avira.antivirus.update.default.plist Support
[running] com.flipvideo.FlipShare.AutoRun.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.smithmicro.cleaning.quickbackupcheck.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.atomicbird.macaroni.launchd.plist Support
[failed] com.avira.antivirus.dbcleaner.plist Support
[loaded] com.avira.antivirus.ipm.loader.plist Support
[running] com.avira.helper.watchdox.plist Support
[loaded] com.barebones.bbedit.plist Support
[loaded] com.bombich.ccc.plist Support
[invalid?] com.bombich.ccc.scheduledtask.EE7EE552-88D4-41A7-BB96-B7F2F891EA0D.plist Support
[running] com.bombich.ccchelper.plist Support
[running] com.flipvideo.FlipShareServer.launchd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.m-audio.firewire.helper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sibelius.sari.plist Support
[invalid?] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.bombich.ccc-user-agent.plist Support
[running] com.c-command.SpamSieve.LaunchAgent.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.spotify.webhelper.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
GrowlMenu Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlMenu.app)
Dropbox Application (/Applications/Dropbox ƒ/Dropbox.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Scorch: Version: (null) - SDK 10.2 Support
SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Myriad Music Plugin: Version: 5.6.2 Support
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.5.0r596 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
DivXBrowserPlugin: Version: 2.1 Support
CouponPrinter-FireFox: Version: Version 1.1.5
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
OVSHelper: Version: 1.1 Support
Google Earth Web Plug-in: Version: 7.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
Safari Extensions: ℹ️
Videobox
DivX Plus Web Player HTML5 <video>
PriceBlink-1
Speed Download
Add To Amazon Wish List
Exposer
Discount Search for Amazon
StumbleUpon
WOT-1
1Password
YouTube Downloader
Rotten Tomatoes
Compass
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
A Better Finder Preferences Support
RCDefaultApp
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
PreferencesPane Support
Macaroni Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 250.11 GB
Destinations:
Time Machine New [Local]
Total size: 2.00 TB
Total number of backups: 33
Oldest backup: 2014-11-13 07:38:50 +0000
Last backup: 2014-11-24 21:19:47 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 250.11 GB X 3)
Top Processes by CPU: ℹ️
      3% WindowServer
      1% avlogwriter
      1% loginwindow
      1% avguard-ondemand-mgmt
      0% fontd
Top Processes by Memory: ℹ️
601 MB savapi
352 MB mds_stores
309 MB avguard.bin
301 MB loginwindow
206 MB Mail
Virtual Memory Information: ℹ️
2.80 GB Free RAM
3.83 GB Active RAM
978 MB Inactive RAM
974 MB Wired RAM
5.87 GB Page-ins
0 B Page-outs

Start time: 10:22:44 01/10/15
Model Identifier: iMac11,1
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 20:24
SATA
   Hitachi HDS722020ALA330
USB
   Hub (NEC Corporation)
   Backup+ Desk (Seagate LLC)
   Backup+ Desk (Seagate LLC)
   Backup+ Desk (Seagate LLC)
   Backup+ Desk (Seagate LLC)
   Backup+ Desk (Seagate LLC)
   Backup+ Desk (Seagate LLC)
   Backup+ Desk (Seagate LLC)
   My Book 1110 (Western Digital Technologies, Inc.)
   Backup+ Desk (Seagate LLC)
   Hub (NEC Corporation)
   Backup+ Desk (Seagate LLC)
   My Book 1110 (Western Digital Technologies, Inc.)
   Backup+ Desk (Seagate LLC)
   hp LaserJet 3380 (Hewlett Packard)
   Officejet Pro 8600 (Hewlett Packard)
Diagnostic reports
   2014-12-19 DashlaneAgent crash
   2014-12-21 QuickLookSatellite crash
   2014-12-22 DashlaneAgent crash
   2014-12-27 DashlaneAgent crash
   2014-12-28 HelpViewer crash
   2014-12-30 DashlaneAgent crash
   2015-01-05 Microsoft Word hang
Log
   Jan 10 10:19:18 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:19:28 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:19:38 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:19:48 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:19:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:20:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:20:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:20:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:20:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:20:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:20:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:21:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:21:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:21:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:21:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:21:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:21:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:22:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:22:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:22:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:22:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:22:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:22:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:23:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
   Jan 10 10:23:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Memory: kernel_task (UID 0) is using 1332 MB
kexts
   com.seagate.driver.PowSecDriverCore (5.2.6)
   com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)
   com.vmware.kext.vmci (90.5.7)
   com.vmware.kext.vsockets (90.5.7)
   com.vmware.kext.vmnet (0188.79.83)
   com.vmware.kext.vmx86 (0188.79.83)
   com.vmware.kext.vmioplug.12.1.17 (12.1.17)
Daemons
   com.carbonite.daemon
   com.apple.installer.osmessagetracing
   com.microsoft.office.licensing.helper
   com.oracle.java.Helper-Tool
   com.apple.aelwriter
   com.adobe.fpsaud
   com.bombich.ccchelper
   com.seagate.TBDecorator.plist
   com.bombich.ccc
Agents
   com.sony.PMBPortable.AutoRun
   com.bombich.ccc-user-agent
   com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
   com.leadertech.PowerRegister.SEA1.UUID
   com.adobe.AdobeCreativeCloud
   com.carbonite.carbonitestatus
   com.adobe.PDApp.AAMUpdatesNotifier.96592.UUID
   com.apple.MassStorageCamera.315272.UUID
   com.adobe.ARM.UUID
   com.bombich.cccuseragent
   com.seagate.dashboard
   com.adobe.CS5ServiceManager
   com.oracle.java.Java-Updater
   com.citrixonline.GoToMeeting.G2MUpdate
   com.adobe.ARM.UUID
   com.google.keystone.user.agent
   com.apple.AirPortBaseStationAgent
   com.hp.scanModule3.64216.UUID
   com.carbonite.carbonitealerts
Startup items
   /Library/StartupItems/HP IO/HP IO
   /Library/StartupItems/HP IO/StartupParameters.plist
   /Library/StartupItems/HP USB EWS Gateway/HP USB EWS Gateway
   /Library/StartupItems/HP USB EWS Gateway/StartupParameters.plist
   /Library/StartupItems/HPlaserjet Trap Monitor/HPlaserjet Trap Monitor
   /Library/StartupItems/HPlaserjet Trap Monitor/StartupParameters.plist
   /Library/StartupItems/VirtualBox/StartupParameters.plist
   /Library/StartupItems/VirtualBox/VirtualBox
Bundles
   /System/Library/Extensions/JMicronATA.kext
   - com.jmicron.JMicronATA
   /System/Library/Extensions/MicrosoftMouse.kext
   - com.microsoft.driver.MicrosoftMouse
   /System/Library/Extensions/Seagate Storage Driver.kext
   - com.seagate.driver.PowSecDriverCore
   /Library/Extensions/VBoxDrv.kext
   - org.virtualbox.kext.VBoxDrv
   /Library/Extensions/VBoxNetAdp.kext
   - org.virtualbox.kext.VBoxNetAdp
   /Library/Extensions/VBoxNetFlt.kext
   - org.virtualbox.kext.VBoxNetFlt
   /Library/Extensions/VBoxUSB.kext
   - org.virtualbox.kext.VBoxUSB
   /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
   - com.AdobeAAMDetectLib.AdobeAAMDetect
   /Library/Internet Plug-Ins/AdobeExManDetect.plugin
   - com.AdobeExManDetectLib.AdobeExManDetect
   /Library/Internet Plug-Ins/AdobePDFViewer.plugin
   - com.adobe.acrobat.pdfviewer
   /Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
   - com.adobe.acrobat.pdfviewerNPAPI
   /Library/Internet Plug-Ins/EPPEX Plugin.plugin
   - N/A
   /Library/Internet Plug-Ins/Flash Player.plugin
   - N/A
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
   - com.oracle.java.JavaAppletPlugin
   /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
   - com.microsoft.sharepoint.browserplugin
   /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
   - com.microsoft.sharepoint.webkitplugin
   /Library/Internet Plug-Ins/Silverlight.plugin
   - com.microsoft.SilverlightPlugin
   /Library/PreferencePanes/Carbonite.prefPane
   - com.carbonite.prefpanel
   /Library/PreferencePanes/DashboardPreferences.prefPane
   - com.seagate.dashboard.preferences
   /Library/PreferencePanes/Flash Player.prefPane
   - com.adobe.flashplayerpreferences
   /Library/PreferencePanes/Growl.prefPane
   - com.growl.prefpanel
   /Library/PreferencePanes/JavaControlPanel.prefPane
   - com.oracle.java.JavaControlPanel
   /Library/PreferencePanes/Microsoft Mouse.prefPane
   - com.microsoft.microsoftmouse
   /Library/ScriptingAdditions/Adobe Unit Types.osax
   - N/A
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
   - com.skype.skypeabdialer
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
   - com.skype.skypeabsms
   Library/Caches/com.apple.Safari/Extensions/Dashlane-2.safariextension
   - com.dashlane.dashlanesafari
   Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
   - com.citrixonline.mac.WebDeploymentPlugin
   Library/Internet Plug-Ins/Dashlane.plugin
   - com.DashlaneLib.Dashlane
   Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
   - com.Google.GoogleEarthPlugin.plugin
   Library/Widgets/HP Ink Widget.wdgt
   - com.hp.widget.inkwidget
Apps
   /Volumes/iMac27 Desktop Clone/Applications/Google Drive.app
   /Volumes/iMac27 Desktop Clone/Applications/Google Drive 2.app
   /Applications/Google Drive.app
   /Applications/Google Drive 2.app
Contents of /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist (checksum 3070240373)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <true/>
    <key>Label</key>
    <string>com.seagate.TBDecorator.plist</string>
    <key>RunAtLoad</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/Seagate/TBLoopDriveParams</string>
    </array>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <false/>
    <key>Label</key>
    <string>com.carbonite.carbonitealerts</string>
    <key>OnDemand</key>
    <true/>
    <key>RunAtLoad</key>
    <false/>
    <key>WatchPaths</key>
    <array>
    <string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
    </array>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
    </array>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <false/>
    <key>Label</key>
    <string>com.carbonite.carbonitestatus</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>OnDemand</key>
    <false/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1821332316)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>16</integer>
    <key>Minute</key>
    <integer>33</integer>
    <key>Weekday</key>
    <integer>4</integer>
    </dict>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.sony.PMBPortable.AutoRun.plist (checksum 2288250257)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <false/>
    <key>Label</key>
    <string>com.sony.PMBPortable.AutoRun</string>
    <key>OnDemand</key>
    <true/>
    <key>Program</key>
    <string>/Library/Application Support/Sony/PMBPortableAutoRun.app/Contents/MacOS/PMBPortableAutoRun</string>
    <key>RunAtLoad</key>
    <true/>
   </dict>
   </plist>
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 2593636600)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.teamviewer.teamviewer</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS/TeamViewer</string>
    <string>-RunAsAgent</string>
    <string>YES</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>WorkingDirectory</key>
    <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS</string>
   </dict>
   ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 2362964135)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.teamviewer.desktop</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>LoginWindow</string>
    <string>Aqua</string>
    </array>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</string>
    <string>-RunAsAgent</string>
    <string>YES</string>
    <string>-Module</string>
    <string>Full</string>
    </array>
   ...and 6 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <false/>
    <key>Label</key>
    <string>com.bombich.ccc</string>
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
    </array>
    <key>ServiceIPC</key>
    <true/>
    <key>Sockets</key>
    <dict>
    <key>MasterSocket</key>
    <dict>
    <key>SockFamily</key>
    <string>Unix</string>
    <key>SockPathMode</key>
    <integer>438</integer>
    <key>SockPathName</key>
   ...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1847580806)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.bombich.ccc.scheduledtask.UUID</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
    <string>UUID</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>ServiceDescription</key>
    <string>CCC will copy the selected items from "Media Disk" to "Music". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
   • Files and folders unique to the destination will be left alone.
   • Files on the destination will be updated only if they are newer on the source.
   • Older versions of updated files will be archived.
   • CCC will not prune archive content.</string>
    <key>StandardErrorPath</key>
    <string>/Library/Logs/CCC.log</string>
   ...and 229 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1637450734)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.bombich.ccc.scheduledtask.UUID</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
    <string>UUID</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>ServiceDescription</key>
    <string>CCC will copy the selected items from "Pictures" to "Pictures Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
   • Files and folders unique to the destination will be left alone.
   • Files on the destination will be updated only if they are newer on the source.
   • Older versions of updated files will be archived.
   • CCC will not prune archive content.</string>
    <key>StandardErrorPath</key>
    <string>/Library/Logs/CCC.log</string>
   ...and 207 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1138618051)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.bombich.ccc.scheduledtask.UUID</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
    <string>UUID</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>ServiceDescription</key>
    <string>CCC will copy the selected items from "Aperture Library" to "Aperture Library Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
   • Files and folders unique to the destination will be left alone.
   • Files on the destination will be updated only if they are newer on the source.
   • Older versions of updated files will be archived.
   • CCC will not prune archive content.</string>
    <key>StandardErrorPath</key>
    <string>/Library/Logs/CCC.log</string>
   ...and 233 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 3444763627)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.bombich.ccc.scheduledtask.UUID</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
    <string>UUID</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>ServiceDescription</key>
    <string>CCC will copy the selected items from "MacHD" to "iMac27 Desktop Clone". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
   • Files and folders unique to the destination will be permanently deleted.
   • Files on the destination will be updated if the size or modification date differs.
   • Older versions of updated files will not be archived.
   </string>
    <key>StandardErrorPath</key>
    <string>/Library/Logs/CCC.log</string>
   ...and 209 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 495358405)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.bombich.ccchelper</string>
    <key>MachServices</key>
    <dict>
    <key>com.bombich.ccchelper</key>
    <true/>
    </dict>
    <key>Program</key>
    <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.carbonite.daemon</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>OnDemand</key>
    <false/>
    <key>WorkingDirectory</key>
    <string>/Library/Application Support/Carbonite</string>
    <key>StandardOutPath</key>
    <string>/Library/Logs/Carbonite1.log</string>
    <key>StandardErrorPath</key>
    <string>/Library/Logs/Carbonite2.log</string>
   </dict>
   </plist>
Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 13465011)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Debug</key>
    <true/>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.teamviewer.service</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Service</string>
    <string>-Module</string>
    <string>Full</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>WorkingDirectory</key>
    <string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources</string>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 578238223)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.bombich.ccc-user-agent.plist (checksum 1605626007)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Disabled</key>
    <false/>
    <key>KeepAlive</key>
    <true/>
    <key>Label</key>
    <string>com.bombich.ccc-user-agent</string>
    <key>Program</key>
    <string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/CCC User Agent.app/Contents/MacOS/CCC User Agent</string>
    <key>StandardErrorPath</key>
    <string>/Users/USER/Library/Logs/CCC.log</string>
    <key>StandardOutPath</key>
    <string>/Users/USER/Library/Logs/CCC.log</string>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.google.Chrome.framework.plist (checksum 2813695882)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <false/>
    </dict>
    <key>Label</key>
    <string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Program</key>
    <string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
    <string>--type=service</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>Sockets</key>
    <dict>
    <key>ServiceProcessSocket</key>
   ...and 7 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 4195197102)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.google.keystone.user.agent</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
     <string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
     <string>-runMode</string>
     <string>ifneeded</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>3523</integer>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.leadertech.PowerRegister.SEA1.UUID.plist (checksum 2799483814)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.leadertech.PowerRegister.SEA1.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Seagate Dashboard.app/Contents/Resources/Seagate.app/Contents/Resources/SeagateRegRemin der.app/Contents/MacOS/SeagateRegReminder</string>
    </array>
    <key>StartInterval</key>
    <integer>3600</integer>
   </dict>
   </plist>
Contents of Library/LaunchAgents/com.seagate.dashboard.plist (checksum 1981328959)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
    <key>Label</key>
    <string>com.seagate.dashboard</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Seagate Dashboard.app/Contents/MacOS/Seagate Dashboard</string>
    <string>-runMode</string>
    <string>autoLaunched</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
   </dict>
   </plist>
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
   <?xml version="1.0" encoding="UTF-8"?>
   <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
   <plist version="1.0">
   <dict>
     <key>Disabled</key>
     <true/>
     <key>KeepAlive</key>
     <false/>
     <key>Label</key>
     <string>org.virtualbox.vboxwebsvc</string>
     <key>Program</key>
     <string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
     <key>Sockets</key>
       <dict>
       <key>Listeners</key>
       <dict>
         <key>SockServiceName</key>
         <string>18083</string>
         <key>SockType</key>
         <string>stream</string>
         <key>SockFamily</key>
         <string>IPv4</string>
       </dict>
     </dict>
   </dict>
   ...and 1 more line(s)
Global login items
   /Applications/HP LaserJet Software/HP Setup Assistant.app
   /Library/Application Support/hp/laserjet/Trap Monitor/HPEventHandler.app
Firewall: On
DNS: 216.40.77.126
Listeners
   cupsd: ipp
   kdc: kerberos
   launchd: afpovertcp
   launchd: microsoft-ds
User login items
   iTunesHelper
   - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
   VMware Fusion Start Menu
   - /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
   Google Drive
   - /Applications/Google Drive.app
   Canon IJ Network Scanner Selector2
   - /Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app
   Android File Transfer Agent
   - /Users/USER/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app
   AdobeResourceSynchronizer
   - /Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
   Eye-Fi Helper
   - /Applications/Eye-Fi/Eye-Fi Helper.app
   Google Chrome
   - /Applications/Google Chrome.app
   Launch Nikon Message Center 2
   - /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
Safari extensions
   Dashlane
Restricted files: 513
Lockfiles: 4
High file counts
   Desktop: 125
Elapsed time (s): 584

Delete too slow, need selective truncate...

Similar Messages

Maybe you are looking for