Deleting iphoto clips in imovie

In Imovie, I can see and edit my iphoto videos.  If i delete these iphoto clips within imove, are they deleted completely or do they remain in iphoto?  Thanks so much for your help.

Thank you SO MUCH.  That will explain why, when I have copied an iphoto clip (within imovie) to an imovie event and then deleted the iphoto clip (within imovie), suddenly my hard drive filled up to capacity.  So it sounds like I need to go to iphoto and delete that clip, in order to save space.  This leads me to 2 further questions:
1 - If i have copied the iphoto clip into an imovie event, will it remain in my imovie event if I delete it from iphoto?  I don't want to lose these clips, I just want to tidy up my video clips and would rather keep them in imovie events than iphoto, if thats possible.
2 - If I delete the clip from iphoto but have used some bits of it in an imovie project - will it delete only the unused sections of that clip and where will it store the used clips if I delete the source clip in iphoto?
Hope these questions make sense and cannot thank you enough for helping me.

Similar Messages

  • When you delete a clip in iMovie where does it go

    When you delete a clip in iMovie where does it go? Is there a trash in imovie?

    Where are you deleteing from?  Deleting clips from an Event moves them to the Trash.
    Deleteing from a Project only removes it from the project and not from the source Event.
    (I'm refereing to iMovie '11)
    Matt

  • How do I delete video clips from imovie on IPAD?

    How do I delete video clips from imovie on IPAD? 

    BTW, I went into Photo and deleted most of the unwanted videos and photos but 1 photo stubbornly stays in the area for editing and I can't find a way to close it in order to delete it.  Help!

  • How to delete iphoto movies in imovie

    Hello,
    I imported all of my iphoto movies into imovie and now I can not figure out how to delete them from the imovie event library. The import used 8GB of memory and I need the space. I searched the forums but I can't figure it out. All help is appreciated. Thanks

    Hello All,
    I found out what happened. For some unknown reason, when I imported the movie clips into imovie they were copied within the iphoto folders. Before the import they were just in the Originals folder. After the import they were located in both the Data and Originals folder in the iphoto path. I was speaking to an Apple Care rep when we found them. At first he was sure that imovie would not copy thm and asked me why I thought that my disk space had been reduced by 8GB. I knew because I watched my free space dwindle during the two hour import and noted the space available before and after the import. He said that this was very odd and imovie should not have not have copied the files and he will report it to Apple. Thanks,

  • Deleting iPhoto events in iMovie

    I do want to delete my iPhoto events / movies from the list in iMovie. For some reason I can only delete events / clips that were imported other than from iPhoto.
    Does anyone know how to get rid of them? I checked the filestructure to possibly delete manually, but I cannot pinpoint files in either the iPhoto package (which increased tremondously after the initial import) or other places were these thumbnail files etc. are storted.
    Anyone got a hint how to go about?
    Note: I am aware that getting into the files manually poses a risk and I do keep backups to restore... in case. So risky hints are also welcome
    Dirk

    I am also puzzled by this loss of disk space when iMovie imports iPhoto for the first time. Would also like to reclaim that space back.
    Here may be the solution: http://discussions.apple.com/thread.jspa?messageID=9415197&#9415197
    Not sure if it would work to delete the movies in the data folder in iPhoto.

  • Re-import a deleted iPhoto video to iMovie??

    Hi,
    I've posted here before about discrepancies in the date and times of some iPhoto Video as shown in the iPhoto Video library of iMovie '09.
    I've manually changed the dates in iMovie of some video and this corrects the issue. However, there are far too many clips to do them all manually.
    Also, while attempting to find the cause of the incorrect dates I deleted an iPhoto Video from the iMovie library. iMovie has scanned iPhoto for new video several times, but does not re-import the clip.
    Can anybody tell me how I can re-import that clip to iMovie?
    How can I correct the dates of the other video?
    I thought of deleting all the iPhoto videos in iMovie and when I restart iMovie it would scan for them again, but I am worried that it will not import them again, like that clip I mentioned.
    Can anybody help?

    Everyone,
    Thanks so much for contributing to this topic and making effort to answer my questions. I called Apple to inquire about this and I have a couple of suggestions that were given to me that may be of some help.
    Two solutions were given to me:
    1) As QuickTimeKirk stated earlier, .mov or .(whatever else might go here) is only a container for other files. So .mov is not the problem or the unreadable file for Imovie, but whatever other file that may be contained in the .mov container is the problem. Therefore, you may have to obtain a 3rd pary converter. They suggested something like flipformac or quicktime pro. I don't know how hard or easy it may be to work with a converter and I am somewhat on a schedule so I opted for option #2.
    2)Download Imovie HD 6 for free, create your project therein, and then export it to Imovie 8 if you wish. Imovie 8 has a tutorial on how to do this if necessary. To download Imovie HD 6 visit http://www.apple.com/support/downloads/imovieHD6.html.
    I hope this helps and thanks again!
    Josèf

  • Delete iphoto thumbnails from imovie

    Hi,
    I am using imovie for the first time and when it launched, it prompted if I wanna import movies from iphoto. And I clicked now, and it generated thumbnails for all the videos in iphoto. How do I delete these? I want to remove the link between iphoto movies and imovie, as from my understanding, everytime I would open imovie, it would try to link and update the thumbnails. Further I have lots of videos in iphoto. I am not sure if I am duplicating them and consuming my HD space. Please help.
    PS : In iphoto, 'copy items to iphoto library' is unchecked.
    Thanks

    iMovie will not delete anything in iPhoto.

  • Trying to delete a clip makes iMovie glitch out.

    I selected a clip in the source window at the bottom and hit COMMAND-DELETE to get rid of it. The first time, it removed all of the UI elements from the iMovie window except for the preview window and the button for the camera. Everything else was grey.
    Second time trying to delete the clip, iMovie just shut down.

    To delete a clip from a project, select it, right-click, choose Delete Selection.
    To delete a clip from an Event, choose the Reject tool in the middle tool bar. Mark the sections you wish to Reject. They will have a red marking under them. Go to the dropdown menu at the bottom and choose Rejected Clips Only. Here you can review everything you have rejected and select "Move Rejected Clips To Trash."
    I haven't seen Command-Delete in the documentation anywhere. I don't know what that would do. If you could point it out to me I would like to read about it.

  • How do I delete  a clip in Imovie and start over

    I have a small clip that I am playing with and want to delete it and start over. I am new to this but find it hard to erase my mistakes. Thank You

    Greetings rwj53,
    Welcome to the Apple Support Communities!
    I understand that you would like to delete a selected clip in iMovie. To accomplish this, please use the instructions for “Move to Trash” listed in the Manage projects and events section of the attached link.
    Keyboard shortcuts - iMovie Help
    Move to Trash
    Moves the selected clip, movie, trailer, or event to the Trash. If only part of a clip is selected, the entire clip is moved to the Trash.
    Command-Delete
    Cheers,
    Joe

  • Delete photo clip in imovie?

    I have an imovie full of photos only....my song is too short...how do I delete the photos to match the song....thanks!!! i don't want to go all the way back to iphoto and re-import them.

    Right-click on the photo you want to remove and click "Delete Selection"

  • When you delete iPhotos videos from iMovie...

    is that deleted from the iPhoto as well? (I hope there isn't a copy in both iMovie and iPhoto)

    As long as the app remains in the store then you can re-download it via the Purchased tab in the App Store app, or via the Purchased Link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    Similarly ibooks can be re-downloaded, and depending upon what country that you are in then music, films and tv shows may also be re-downloadable (if they remain available in the store).

  • Unable to delete rejected clips

    When I click on "Move Rejected to Trash" it says "Unable to delete rejected clips." The clips are not from any event, as they are clips from iPhoto Videos. I've searched around the Discussions but couldn't find an answer. Anyone have any insight?
    Thanks!

    iMovie will only delete clips that it "owns". To delete iPhoto clips, you must delete them in iPhoto. I don't know any way to delete partial clips in iPhoto.
    You could export the clips from iPhoto and convert them to an iMovie compatible format using a tool like MPEG Streamclip. Then import into iMovie. Then you can reject clips and delete them.

  • "Unabe to delete rejected clips"?

    ...tried "moving rejected clips to trash...
    ...got Error message...
    "Unabe to delete rejected clips:
    The operation could not be completed.Error writing file: /Users/donrex/Movies/iMovie Events.localized/Family 56/iMovie Thumbnails/clip-135-02-05 05;27;15-1"
    I now have 2 Event Libraries with problems.
    On one, the Project Library shows a triangle symbol with a exclamation sign, and, won't show clips in the Preview screen. On another, much of the Event now has grayed clips.
    I also experienced the unplanned deletion of some clips, and, some clips being combined with another clip.
    Any help?
    Don

    iMovie will only delete clips that it "owns". To delete iPhoto clips, you must delete them in iPhoto. I don't know any way to delete partial clips in iPhoto.
    You could export the clips from iPhoto and convert them to an iMovie compatible format using a tool like MPEG Streamclip. Then import into iMovie. Then you can reject clips and delete them.

  • What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

    what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil"  I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
    Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
    Thanks for any help

    Zachy,
    It goes something like this...
    Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
    Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

  • I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

    I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

    I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos.  I can stand to re edit one or two projects, but not ALL.

Maybe you are looking for

  • Storage issues for Proxies using Final Cut Server

    Hi there, we have a fairly high amount of material that is just being put into Final Cut Server to be archived again. I dont mind the Xserve being busy to create these proxy files, but they tie up too much space! (Maths: 500 GB / 40 h of DVCAM footag

  • Can anyone help me get my Apple TV display to stop blinking on and off every second?

    Hi, My Apple TV is a little under a year old its not version 1 I'm pretty sure it's 2... When I started it up the other night it came on but the display in the screen was blinking on and off about one a second non stop.  The white light on the Apple

  • Upgraded to LCD monitor, but unrecognized

    Hi. I have upgraded from a plug and play monitor to a Dell LCD which accepts DVI, but I'm keeping my same Geforce4 Ti 4400.  The problem is that I can't get my card to recognize that it is plugged into the DVI slot.   I'm currently running on the D-S

  • When is  table BOM_CTO_ORDER_LINES populated

    Soes anyone have any information regarding this Oracle table 'BOM_CTO_ORDER_LINES'. We are trying to determine when this table gets populated.  We know that the Autocreate config process populates the table but when exactly and which API does it  ?

  • How are contacts handeled during sync?

    I currently sync my iPhone with my computer and it uses my outlook contacts to populate the iPhone's contact list. If I was to add a contact to my iPhone and then plug it into my computer, would that contact be transferred into outlook, would it be r