Deletion of generated transformation programm

Hi
We have implemented includes in the expert routines in our transformation. After we have deleted a transformation with an customer include, we wanted to delete the customer include. This is not possible as the include is still used in a programm generated by SAP (program class RSTRAN_MASTER_TMPL_X / Generated Runtime for Transformations).  I believe that this program should have been deleted when we have deleted the transformation. Does anybody know how we can delete this generated programm?
Thanks for helping.
Reto

Hi Reto,
Just to share some tasks I do when I encountered this similar incident.
Would you still recall the technical name of your transformation?
You can try to search this in RSA1 as sometimes this is not yet completely deleted and can still be seen by the system. So in case there was a search result, you can delete it from there.
Can you try using a where use in your INCLUDE as this may also be inserted in a different transformation. Normally a system generated program for a transformation starts with a GP***
Then in case there is a search result you can display this generated program and you can see the technical name of this other transformation. You can verify this transformation if you still need this or you can delete so you can delete your include.
In case the transformation is in the system you can try to activate it first just to "clean" up things first related to your transformation then from there try deleting again your transformation.
Hope this helps.
Cheers,
Jeff

Similar Messages

  • How to delete the Generated files from application server(open hub)?

    hi experts,
    when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
    when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
    so to delete the generated file from application server, how to delete it for specific dates?
    Information on where terminated
    Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
    "START_ROUTINE".
    The main program was "RSBATCH_EXECUTE_PROZESS ".
    In the source code you have the termination point in line 2874
    of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
    The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
    and when i check the dump it is point out at below code
    " Populate the lookup table for 0STOR_LOC
    SELECT * from /BI0/TSTOR_LOC
    into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
    FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
    STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
    but the programme is syntactically correct only.
    how to rectify the issue.
    regards
    venuscm
    Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

    hi experts,
    We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
    here is the code written in the Transformations
    In the global section
    Text for 0STOR_LOC
        DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
              WITH UNIQUE KEY stor_loc.
        DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
    and in the code to get the text
    " Populate the lookup table for 0STOR_LOC
        *SELECT * from /BI0/TSTOR_LOC*
          into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
          FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
                  STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
    im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
    thanks
    venuscm
    Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

  • Error when generate Transformation- GP_ERR_RSTRAN_MASTER_TMPL related

    Dear all:
    We created transformation for cube 0PA_C01 and infoSource 0HR_PA_1 based on 3.x transfer rule. When we performed "Check", it is done successfully with any error. But during activation, there s syntax error occurred in program "GP_ERR_RSTRAN_MASTER_TMPL". And error lines are as following--
      line 2815:
      "Field "_B_1-MVIEW-CO_AREA" is unknown. It is neither in one of the spe"
      "cified tables nor defined by a "DATA" statement. "DATA" statement. "DA"
      "TA" statement."
    Also there are two error message generated :
    RSTRAN511- Error During generation
    RSO404      - Error when activating Transformation 0ERUYQ8XMDJS1DP5U5U7HTBBNBME3GOE
    Any thought please ~~~
    BR
    SF

    Hi
    Iam creating transformations for 0IC_C03. Iam facing problem in activating the transformations successfully. Some times it is throughing the above said error and some other times it is throughing the error ASSIGN_TYPE_CONFLICT. I searched forums almost a day and i found that SP 9 is unstable in which we are now and experts suggesting to upgrade to SP10 or SP12. But the problem is client is not willing to go to SP upgradation now. I have no clue now. I almost spend two days on this. But on the other hand iam able to generate transformations successfully and able to load data for other cube 0SD_D04.
    kindly suggest any one to get rid of this issue. Iam running out of time.
    Thanks
    Kumar

  • How to generate a programmable CLK up to 32MHz with an FPGA card like PXI-7831R?

    Hello,
    i need to generate a programmable Clock on the FPGA card, which can be used for up to 32MHz.
    I already used single-cycled-timed loops with which iam able to generate faster clocks but they are not programmable since one Channel is only allowed to be connected to one time domain at a time.
    At the moment the fastest i get is a 15MHz clock with a normal while loop, which has a timer inside to delay it for slower CLK frequencies. The timer can be disabled by a case structruce, since even if the delay is 0 ticks, the fastest CLK speed is 10 MHz.
    This only works with an derived CLK of 120MHz which is the maximum iam able to achieve on my system.
    In all cases i use a single inverter inside the loops which keeps on inverting its own signal.
    (Labview 8.2, PXI system)
    Iam open to any ideas since i have run out of them.

    What resolution do you need on the clock rate that you want to generate? The example below is a single cycle timed loop set to run at 100 MHz and can generate any clock rate with a resolution of 10 ns. The fastest clock that can be generated is 2 cycles of the SCTL (50 MHz). From there you can generate a clock at 3 cycles, 4 cycles, etc.
    Message Edited by Christian L on 06-27-2007 02:51 PM
    Christian Loew, CLA
    Principal Systems Engineer, National Instruments
    Please tip your answer providers with kudos.
    Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
    or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
    to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense
    Attachments:
    varclock.JPG ‏28 KB

  • How to delete the Generated WSR

    Hi experts
    how to delete the generated WSR , is there  any way to delete the Generated WSR rules
    please help
    Regards

    Hi,
    Go to Transaction PT02 (Change Work Schedule) use Delete function to delete existing work schedule.You can use the Choose function to display detailed data for the individual daily work schedules before deleting them.
    If you delete the work schedule for a month, choose Delete. Skip any months that you do not want to delete by choosing Next Month or Previous Month. The system deletes all work schedules for which period calendra month you displayed information.
    I hope this wil help you.
    Thanks,
    Padmaja

  • Deleting Automatic Generated Analysis Authorisation

    Dear All,
    We are generating Value and Hierarchy analysis authorisation automatically with the help of DSOs 0TCA_DS01 and 0TCA_DS02.( through RSECADMIN )
    Upon generation everytime, it first deletes all the previously generated analysis authorisation ( for the users that are available in these DSOs ) and creates new ones with the name starting as RSR_*.
    If the username for a particular user is not present in these DSOs, system will not delete / create anything for those users.System deletes / creates analysis authorisations only for those users that are available in these DSOs.
    Suppose a user a going out from the organisation, in that case we need to manually find out all the analysis authorisations ( RSR_* ) that were previously generated for that user and delete the analysis authorisations manually.
    This is time consuming process.
    Could you please advise any automatic / simpler way for deleting previously generated analysis authorisations for such users.
    Assume that these users are not available in the new data loaded in these DSOs.
    Thanking You,
    Tarun Brijwani.

    Hi Tarun,
    If a data record with the user name 'D_E_L_E_T_E' is loaded into the DataStore object 0TCA_DS01, first the generated authorizations for all users in the BI system for the DataStore object record are completely deleted (separated by the first part of the name before the digits) and then generated for the rest of the data.
    Please refer the following link for more information.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/55/46eb411a7f6324e10000000a1550b0/frameset.htm
    Thanks,
    Krishnan

  • I am unable to control my iPad 2. It is generating random letters when typing and when I try to delete it generates more letters unless I go slowly! Any advice?

    I am unable to control my iPad 2. When typing and deleting it generates random letters! Any advice

    Start with this and see how it goes. Quit all apps completely and reboot the iPad.
    Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Cannot delete file generated by Transformer.transform

    Hi,
    I'm having problems to delete a file that I just generated through a call to Transformer.transform. Here is a code snippet :
    DOMSource source = new DOMSource(document);
    StreamResult result = new StreamResult(new File(".\myFile.xml"));
    Transformer transformer = ... // get transformer()
    transformer.transform(source, result);After that call, It is impossible to deleted "myFile.xml", either programmatically or manually (through Explorer) as long as the program is running.
    I'm using JDK 1.4.2_08 and the libraries from JWSDP 1.6. The exact class of the transformer is : com.sun.org.apache.xalan.internal.xsltc.trax.TransformerImpl
    This code was working (the file could be deleted) when we used the xml stuff from the jdk, the problem happen when we used the libs from JWSDP 1.6.
    Anybody has encounted a similar problem or have a suggestion ?
    Thanks,
    Martin

    Hi,
    I found the answer in the bug list (6216226 and 6180440). The work around is to used an OutputStream an close it ourselves after the transform, like this
    DOMSource source = new DOMSource(document);
    // We create a StreamResult from an Output Stream in order to be able to
    // close the stream ourselves because the transform method leaves it open
    // in JWSDP 1.6 as reported by Java bugs ids 6216226 and 6180440
    outputStream = new FileOutputStream(new File(".\myFile.xml"));
    StreamResult result = new StreamResult(outputStream);
    Transformer transformer = ... // get transformer
    transformer.transform(source, result);
    if (outputStream != null) {
        outputStream.close();
    }Thanks anyways !!
    M.

  • Can I delete downloaded purchased tv programmes from my ipad4

    Hi
    I have tv programmes purchased from itunes on my ipad which I want to delete. Can I do this?

    You're quite welcome.
    The entire Apple Support Community has lots of very knowledgable users that are very well versed in all manner of Apple products and software. I think the ASC is a wonderful resource for help. I am glad that your first experience was a good one, and I'm doubly glad that I was able to be part of that for you.
    Don't be a stranger!

  • SOST delete line generate notification email auto.

    Hi,
         Maybe this question is easy to answer but I have no clue where to look. In the transaction SOST when we delete a line before it was sending to the fax server the system generate automatically a notification. The notification (email) said that the fax could not be sent, because the administrator deleted it.
         It is possible to deactivate this option or change de subject of the email?
    Best regards

    Hello,
    You can deactive SAPOffice Express infor by:
    - Transaction SM30
    - Table SXPARAMS
    - set Parameter STATUSMAIL_FORCE_SETTINGS = N
    Check SAP Note 960880 also.
    Regards,
    David

  • Delete event generator using wlst

    Hi guys,
    Does someone know if it is possible to find timer event generator by its name and delete it in Weblogic(version 9.2.3) using wlst?
    Thanks

    You could see this informantion here:
    http://docs.oracle.com/cd/E14981_01/wli/docs1031/deploy/cluster.html#wp1519038

  • What is the best way to delete dynamically-generated symbols from another symbol?

    in the onClick handler for 1 symbol, I have:
    var sandwhichQty1 = sym.createChildSymbol("sandQty1", "Stage");
    another symbol inside sandQty1 has the onClick method:
    this.deleteSymbol();
    which works fine, deleting sandQty1. I'd like to delete it, and others, from another button, in the circumstance where users don't close them this way.
    I notice that id and class are dynamically assigned to the child symbol, which makes it hard for me.
    any ideas?

    Hi, I did it in this way, and functions well; maybe this is not the best way, but worked for me. Obviously this code is based on the elainafineell's correct solution.
    This is my scenario:
    In a Trigger @ xxxxms there is that:
    var i = 1;
    $.each(results, function(index, element)
         var s = sym.createChildSymbol("mySymbol", "someContainer");
         // some code here
         // Creating the variable that save my new instance of mySymbol
         sym.setVariable("var_id"+i, s);
         i++;
    // a global var, take care with the name
    numOfInstances = i;
    Then, in a click action of some button, symbol, anything that support an action, I code this:
    sym.eraseSymInstance();
    And, in the creationComplete, I code the function like this:
    sym.eraseSymInstance = function()
              for(var i = 1; i <= numOfInstances; i++)
                             var s = sym.getVariable("var_id"+i);
                             s.deleteSymbol();
    For me function well.
    I hope this can be usefull for somebody else.

  • Generate transformation in ABAP

    Hi,
    i need to create a transformation with an expert routine dynamicallyy in ABAP ?
    (expert routine contailns always the same coding)
    Any idea?
    regards
    rouzbeh
    Edited by: Roozbehan on May 26, 2010 9:50 AM

    Hi,
    my problem is modifying a standard dso from an internal table which contains  modified entries
    from active table of dso.
    Edit DSO Entries
    I want to modify dso via a request (in order to modify all three tables automaticcaly)
    i need to start a dtp.
    as i have no transformation manually created in bi, my idea is to create dynamiccaly a dtp
    which calls my coding in exper routine.
    thanks

  • Deleting auto generated contacts

    how do i delted email addresses that are auto-entered when answering emails?
    they aren't in my contacat list,
    but show when i compose or foward  emails.  for example, i ran an add in craigs list, and everyone i responed to is now in my email lists on alo and gmail, and i can't find a way to delete them.
    i went to my gmail and aol accounts and they are not listed there, only on my ipad2's email lists.
    any help would be appericated.
    thanks
    frank

    The iOS Mail app stores all email recipients in a list of previous recipients. The email address autofill feature when addressing an email pulls from your contacts and from the list of previous recipients.
    There is no access to the list of previous recpients to add a previous recipient to your contacts that is not already entered or to remove a previous recipient from the list - not at the present time anyway.

  • Deleting profile, generated in RSSM

    Hi, All!
    When I define profile for authorisation object for character values in RSSM, it's created, but not visible in the list of profiles in PFCG - therefore I can't delete it neither in SU01 and RSSM(it isn't visible) nor in su02/su03(it's blocked, because it used in user profile)? How can I solve this deadlock?
    Thanx in advance

    2 Mike Ruhjon:
    Yes. Doesn't help
    2 Michael S:
    > what do you mean by "include profile in profiles page"?
    In SU01 for same user as in RSSM on "Profiles" page.
    > did you enter a profile in SU01 profile tab for a user?
    Yes
    > or did you enter a user in the role maintenance su01?
    No. This is authoriasation for info-object values. I don't want to include it in roles
    > Did you run the user master data comparison in SU01 for the role or transaction PFUD?
    I dont use roles, so it makes no sense.
    > What did you try to achive in RSSM?
    > Where do you run the usage log?
    I use BW3.5 SP11 on 6.40 basis. Does this problem persist at your systems?

Maybe you are looking for