DeliveryScheduleConfirmation message from supplier
Hi,
We are trying to map Scheduling Agreement confirmations in a B2B scenario. What would be the inbound proxy interface in SNC to receive the Delivery Schedule confirmations ? I could see a DeliveryScheduleConfirmation_Out but no inbound interfaces...
Also for the EDI part, could we use message 855 (PO ack) instead of 862 ?
Thanks,
Sankalp
Hi Sankalp
The release process does not support B2B scenario, it supports only A2A
As such there is no interface available in SNC to map this.
Only in case of releases planned in APO, schedule confirmations can be sent back using DeliveryScheduleConfirmation
to apo.
Best Regards
Vinod
Similar Messages
-
Hi,
I am a new user of labview.
I got Vector Card, DUT, DC Power supply and .dll file. Hoe can i connect dll file and hoe to senf the information to the device,
i want to send/receive a message to that device . and measure temperature , humidity of the device. is any one can help?
i have a .dll file, i want to send messages from this file to the testing device ,how can i do it in labview?Dear Sandy,
How are your DUT, Vector Card and your PC connected?
What vector card is this?
There are a huge amount of Knowledge base articles that you can access from www.ni.com. Simply go to the website and do a search on dll, etc.
There are also a lot of example problems shipped with LabVIEW that will be very helpful for you to learn from and to modify to meet your needs. Go to File»Find Example ....
There are LabVIEW classes taught locally as well that are very helpful. If you're interested I can arrange for you to receive an email with info about it.
Sincerely,
Sammy Z. -
Bank Communication Management - Incoming messages from Banks
Hi,
We are using Bank communication management. When we send our ACH and Wire files to the bank, the bank sends two confirmations: 1. First confirmation says that the file is received. 2. Second confirmation sends the total number of items and total amount in the payment file.
I have done the necessary configuration in BCM in the step shown below:
Financial Supply Chain Management ® Bank Communication Management ® Payment Status Management ® Map External Status to Internal Status
How do I update this in the payment monitor (T-CODE - BNK_MONI)?
SAP says
You must connect the XI system to the ERP system. The interface Collective Payment Order Notification must be set up. What is this interface 'Collective payment order notification' and where should I set it up?
Any help in this regard is greatly appreciated.
KalyanHi Ankish,
As mentioned by Kalyan above (check suggestions from SAP in his comment), you should use the interface Collective Payment Order Notification given by SAP in ESR (Enterprise Service Repository) SAP APPL (SAP APPL 6.05). If your PI environment doesnot have it then you need to request yuor basis to download this from SAP.
After you download the ESR , you can find the standard Service interface called "CollectivePaymentOrderNotification_In" under Namespace http://sap.com/xi/APPL/Global2 .
Now once you have this interface downloaded, create a new message mapping using the message Type "CollectivePaymentOrderNotification_async" as Target, and your message from BANK or SWIFT (uploaded into PI as external definition) as source. Map the required fields , mainly map the external status code from BANK to ExecutionStatusCode field. Also map the required header fields.
Once you create the new mapping , create required Integration builder objects and you are all set.
The CollectivePaymentOrderNotification interface is proxy in ECC which has required methods to update the BCM with the status.
Also please check below links for more information.
http://help.sap.com/esoa_erp2005_ehp2/helpdata/en/46/802b59e186429ee10000000a1553f7/content.htm
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/22/e-payment-a-customized-solution-other-than-sap-integration-package-swift-part-3-receive-from-bank-push-to-sap-bcm
Regards,
Suresh -
Send JMS message from Oracle to Weblogic topic.. How?
Hi,
I need to send messages from within Oracle Database to a topic in Weblogic. I understand that I can create a trigger that executes
a Java Stored Procedure. This trigger can be invoked upon row
addition/update or delete .
The java stored procedure itself can be be a client program that does a jndi lookup, has code to communicate with the topic on a remote Weblogic server. I can write and test this program independently using Oracle supplied jar files (jndi.jar, jar files that have jms api's etc.) then load it into the database and it should work.
Am I missing something. Is there any complication with jndi lookup, initial context, etc. The Oracle 9i and Weblogic reside on different servers.
Has anyone done this? Is there a better way of sending messages?
Should I bother with messaging gateways?
Thank You for your reply.
Samir SahuIt should be quite straightforward to do this. As stated you need weblogic.jar in your classpath, then use 100% standard JMS calls to publish.
Ensure that you set the following properties before getting your initial context:
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
java.naming.provider.url=t3://node:7001 (or whatever)
this will ensure that the correct JMS implementation classes are invoked.
You can't easily (without some mucking around) build a test implementation in an AQ environment and then deploy to WebLogic because in AQ you don't tend to use JNDI lookups (unless you've implemented oracle JNDI etc) but rather use non standard factory class to create connections etc. -
Retrieving error messages from lpxus.msg
What methods must be invoked in order to retrieve the correct error codes.
Eg 202 means 'file not found'.
How would be retrieve this message from \mesg\lpxus.msg(using the C++ XML Parser)
There are no examples in the samples.
nullHi,
This is explained in the readme and function documentation:
Currently, the only message file is in English although message files for
other languages may be supplied in future releases. You should set the
environment variable <tt>ORA_XML_MESG</tt> to point to the <b>absolute
path</b> of the <tt>mesg/</tt> subdirectory. Alternately, if you have an
<tt>$ORACLE_HOME</tt> installed, you may copy the contents of the
<tt>mesg/</tt> subdirectory to the <tt>$ORACLE_HOME/oracore/mesg directory</tt>.
The function documentation for xmlinit() explains the msghldr parameter that can
be used to process error messages (or they are printed to stderr if msghdlr not
supplied).
Thanks,
Oracle XML Team
null -
My iphone 4S won't load email messages from my local carrier on a regular basis. It says cannot get mail in use on another device. I thought everything was to sync together? Local carrier tells me it is Apple not them. It's been happening since I got my Kindle Fire about a month ago. Any ideas how to make everything work together????? Does it when kindle is off to sometimes. Thanks.
Hi Maquillage,
Thanks for using Apple Support Communities. I would recommend troubleshooting the iPhone by following the instructions in this article:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Cheers,
- Ari -
Galaxy s5 not receiving messages from iphone users
Ok so sorry about the long question but I just bought a galaxy s5 to replace my iphone 4s and im having trouble getting messages from iphone users. I tried turning off imessage, turned off find my iphone, resetting the device completely, and even created a new apple id but nothing has worked in the past 6 hours. The only thing I have left is to contact apple support but I really dont want to spend $20 to talk to someone if I dont have to... Any help at this point will be apprectiated. Thanks
At the risk of repeating some information, I'm leaving a full message here because I found many of the suggestions above to be vague and confusing. This is a step by step of the call that I just put in to Apple to fix this issue with Samsung S5 Galaxies not getting text messages from iPhones. This process should only be necessary if you no longer have possession of your iPhone; if you do, it seems from messages above you can go into your iPhone's settings and turn off iMessage yourself.
NOTE: According to Victoria, the Apple rep who was familiar with the problem and (supposedly, within the next half hour to 24 hours) fixed the problem, iPhone users who have updated to IOS 7.1.1 --not just 7.1, but the 7.1.1 specifically -- will not have this issue, as 7.1.1 fixed the issue causing this disconnect. However, any iPhone user operating under 7.1 or previous systems will not be able to send an S5 Galaxy user a text without an elaborate and individualized process to remove the former iPhone user's iMessage link. So, here's what I did:
1. Called Apple Support at 800-694-7466 (I could not find the section headings/descriptions mentioned by FoxFifth above on the website listed; the sections did not match anything on the page linked to that supplied url)
2. Followed the prompts, which involved giving my phone number (the one now linked to my Galaxy S5 but formerly to my iPhone 4s) and verbally requesting a representative at the appropriate time after the appropriate prompt. NOTE: disregard the warning about a $19 one-time service charge; it will not apply once you speak to someone.
3. Wait for a rep.
4. When the rep answers, say, "I just upgraded from my iPhone (4, 4s, 5, etc.) to a Samsung Galaxy S5 and can no longer receive texts from other iPhone users. I found online that this is because my iMessage is still turned on and I need you to deactivate my iMessage that automatically sends other iPhone users' messages to that old phone, which I no longer have."
5. The rep, who -- if they are anything like Victoria, who said she's done this "quite a lot today, actually" -- will recognize your issue. The rep will send you a text message to your new device, which contains an alphanumeric code that you must read back to the rep to authenticate it. At that time, the rep will put in your iMessage deactivation request; it should (here's fingers crossed) become active within 24 (some users here say 48, so be patient) hours, at which time the problem should disappear.
I hope this is detailed enough to help everyone else out there. Based on the Apple rep's familiarity with my problem, I'm hopeful the process will work as promised. I will update when I know for sure after a day or two that it is (or isn't) working. -
My wife and I both have an iphone. We initially set them up under one apple id account. When we text sometimes we will receive each others text messages from others. Example I will text a friend...she will not see my text but the reply comes to both of us. It seems to be random which ones. Any ideas how to correct this
Yup, get your own AppleID.
The messages that are being sent to both phones are technically not text, they are Apple's iMessage. They use the data part, not the texting part. So if you have an iPad or a Mac computer, you can send/receive the iMessages there too.
KOT -
I received the new update from Itunes and after installing, I couldnt get into my Itunes. I get a message from Windows saying that an MC file is missing and to reinstall I tunes. I have reinstalled 3 times, the first time I didn't remove the old version, I installed the update over it. Next I tried the repair function under Control Panel. After that, I uninstalled Itunes and reinstalled again from the website. I still get the same message about missing files from Windows.
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Unable to capture messages from java.util.logging
I have a class called (Caller.java) which invokes a method called foo from another java class(Util.java) using reflection API.Now this method foo logs messages using Java's logger.My requirement is to call foo for 3 times from Caller and capture/redirect the log messages into 3 log files.
But only the first log file is capturing the log messages(from logger) and other two are not ?
Plz suggest if I am doing somethin wrong here ?
Caller.java
package project2;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.PrintStream;
import java.lang.reflect.Method;
public class Caller {
public Caller() {
public static void main(String[] args) throws Exception {
Caller caller = new Caller();
for (int i = 0 ;i<3 ;i++ ) {
caller.createLogStream(i);
System.setOut(caller.getPs());
System.setErr(caller.getPs());
/*****************Invoking Util.java*****************************/
Class clas = Class.forName("project2.Util");
Method m = clas.getMethod("foo",null);
Object obj =clas.newInstance();
m.invoke(obj,null);
public void createLogStream(int i) throws FileNotFoundException {
ps = new PrintStream(new File(System.getenv("HOME")+File.separator+"MyLog"+i+".log"));
public void closeLogStream(){
ps.close();
ps = null;
private PrintStream ps = null;
public PrintStream getPs() {
return ps;
} Util.java
package project2;
import java.util.logging.Logger;
public class Util {
Logger logger = null;
public Util() {
logger = Logger.getLogger(this.getClass().getName());
public void foo(){
System.out.println("Hello out stream");
System.err.println("Hello error stream");
logger.info("This is an information");
logger.warning("This is a warning message");
logger.severe("This is fatal!! ");
}First Log file MyLog0.log:
Hello out stream
Hello error stream
Feb 16, 2009 7:55:55 PM project2.Util foo
INFO: This is an information
Feb 16, 2009 7:55:55 PM project2.Util foo
WARNING: This is a warning message
Feb 16, 2009 7:55:55 PM project2.Util foo
SEVERE: This is fatal!!
Feb 16, 2009 7:55:55 PM project2.Util foo
INFO: This is an information
Feb 16, 2009 7:55:55 PM project2.Util foo
WARNING: This is a warning message
Feb 16, 2009 7:55:55 PM project2.Util foo
SEVERE: This is fatal!!
Feb 16, 2009 7:55:55 PM project2.Util foo
INFO: This is an information
Feb 16, 2009 7:55:55 PM project2.Util foo
WARNING: This is a warning message
Feb 16, 2009 7:55:55 PM project2.Util foo
SEVERE: This is fatal!! Other 2 log files have only this much
Hello out stream
Hello error streamA stale Connection Factory or Connection Handle may be used in SOA 11g
Regards,
Anuj -
I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
Cannot send txt messages from my iPhone to a android galaxy gear 3
My husband switched from an iPhone to a galaxy note three and kept his old cell number. Now he cannot receive texts from any other iPhones including mine.
Research on Internet indicates this is common issue when an iPhone user switches to an android device and keeps old number from iPhone! Problem does not happen with new android devices .any workable solution known? So far suggestions in forums have not helped. APPLE store personnel uninformed reissue,as well as Best Buy personnel.Looks to me like the question has indeed been asked 500 times or more...but still looks to me like many still have unresolved solutions if they have more than one Apple device. I've been attempting to follow advice giving in forum conversations...still, no luck. I had turned off imessage on old IPHONE before, then unregistered my old iphone, but still can not get txt messages from any of my friends who have an iphone...not one. I do have several other Apple devices..an IMAC, an MAC BOOK PRO, an IPAD 2 and an IPAD3 still on my same Apple Account that my old phone was on. Is this now the problem
-
Is there any way to copy email messages from an iPhone to a computer (pc or mac)?
My pc with my mail database was formatted and the mails lost. I have about 1000 mails on my iPhone that I desperately want to transfer back to my desktop.
My mail was on a POP server and I have no copies anywhere other than on the iphone.
I am not concerned about future email messages - my question is about transferring existing messages from the iphone to a computer.
Any help is much appreciated, in have googled this to death and can't find a solution!!This might help..
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
How do I transfer voicemail messages from my iPhone 4 to my Mac?
Hi
I'm trying to transfer a selected group of voicemail messages from my iPhone 4 onto my mac - would someone please advise me if there's a simple method to do this?
Cheers
Stephen.Get this, does that & a whole lot more:
http://www.ecamm.com/mac/phoneview/ -
How can I delete saved messages from my iphone 5s to be able to update it?
I have needed to update my Iphone 5s from the past 2 updates but it says that I have 4.2 GB of saved messages. I don't know where to go to delete them. I delete regular messages from my phone daily so I'm not sure what is being saved and where.
Thanks!You would need to set up your mail account as a POP account instead of IMAP.
I'm not sure if Hotmail/msn offers that -
Maybe you are looking for
-
Cannot open raw files from my Nikon D3200 in Elements 11
After I found I could not open raw files from my new Nikon D3200 in Elements 10, and did a couple hours of searching the web site, I upgraded to Elements 11. Elements 11 also will not open the raw files from the D3200
-
"duplicate button press" problem in jsf 1.1
I think the problem come from "duplicate button press", when the users press the button several time, many request is generated, the sad is I don't have the source code of this page, I just have the source code which receive these request, what I wan
-
HI Guys we have an business requirement to store data in average figures , The values are entered on the base member level but in reports we need to show average values on the parents level instead of sum ( by default in BPC values are sum in node
-
How to change the login's background
Hi all, I'm new with apex and i need to change the login's background, i want to place an image as the login's background. how do i do that?? where should i change it ?? Regards Carlos
-
Quicken 2004 crashes on opening in Snow Leopard
We just upgraded to snow leopard and now we cannot open Quicken 2004 to access our financials. We tried Rosetta but no luck. any advice would be greatly appreciated. Message was edited by: paloma65