Delta-enabled 0MAT_PLANT_TEXT data source?

We're implementing BI 7.0 in an ECC6. We have a very large MARC table due to about 360K materials created across 350 locations. This currently equals about 31 million records on MARC.
Populating 0MAT_PLANT has become a real pain because apparently the 0MAT_PLANT_TEXT data source does not support deltas. This means a very long wait to reload 31 million rows each time we run the master data process chain.
0MAT_PLANT_ATTRIB supports deltas, as does 0MATERIAL_TEXT. I've searched OSS and googled to no avail.
Has anyone come across a way to delta-enable 0MAT_PLANT_TEXT? I've poked around with the extractor in RSO2, but the delta checkbox is always grayed out. I suppose I could create a custom extractor but not sure that generic deltas would be the right thing?
Thanks for any ideas.
--Scott

Hi Scott,
first of all I would think about if it is really necessary to do a text upload all the time. Basically the texts don't change frequently, so it might be enough to upload the texts once in a while. Additionally you might restrict the load to just one or two languages, depending on your needs. Next suggestion might be to have some parallel infopackages (restricted by number ranges) to speed up the load.
If all this will not help, you might need to create something generic based on mara, marc and makt using the fields mara-ersda and/or mara-laeda for your generic delta.
regards
Siggi

Similar Messages

Delta Enabled Generic Data Source

Hi All,
I have created one Delta Enabled Generic Data Source with
Function Module. The Delta field is Date Field. The Data source picks data from R3 to BW.
In RSA3, I executed the Extractor with the Delta Type "C" i.e Delta Initialization ... but it is throwing the error "Errors occured during the extraction". I also checked the Display Log and the error message is "Could not determine BW release of logical system".
Moreover I am not able to see the Delta Attributes in
RSA7. I checked with the other delta enabled generic extractors which uses Views .. is found to be working fine ... and I also able to see the Delta Attributes in RSA7.
Any suggestions?
Bye
Dinesh

Dinesh,
Once you have generated transfer rules in BW for the datasource, delta init can be tried out in RSA3. It iwll not create the delta queue though. Only test the initialization.
To do this, once you have created the transfer rules in BW, specify the logical system name of the BW system in the target system field. After that the extractor can be run in RSA3. It is flagged as read only so delta queue will not get created.
Cheers
Aneesh

Delta enabled generic data source not updating delta

HI,
   Created one Delta enabled generic datasource with the help of ztable .Fill the content of table by manual entries.
   While executin init,records are extracted from R/3 system. After made a change in table entries , it is not captured in RSA3.
   Data source is avaialble in RSA7 after execueting init.
   Delta type== TIME STAMP
   fIELD NAME=zTIME
SAFETY LIMIT=30 SEC
ITS FROM 'NEW STATUS FOR CHANGE RECORDS'
Please help me on this issue..
Regards,
MohammeD

how did you create your data source? - based on view, table for Function Module?
If it is based on a View or table, ideally delta should have worked. If it is not working, please chedk the data type of the field. Make sure that delta field (i.e. ZTIME) is getting updated evertyime you change any record in ztable. While extracting data in RSA3 in delta (D) mode, make sure you also give the target system ID. Also try runnign the delta infopackage in BW if it fetches data.
If nothing works, try creating your data source again.
If it is based on Fuction Module, you will have to include the delta functionality in your code.
Regards,
Gaurav

Delta enabled generic data source not generating delta

Hi Experts,
I am simply clueless bt where I went wrong.Please have a look and explain.
I first created a z table in r\3 with one field as timestamp.
Then I created a delta enabled datasource for this table, in the delta enabled field I selected Timestamp.
Safety interval left blank.
Delta was chosen as "ADDITIVE DELTA".
After that I saved my data source and replicated the same in BI server.
Then I created an Infopackage to initialize the delta and then one more infopackege was created as delta .
Initialization was successfull.
Now I triggered the delta infopackage to bring delta to PSA
BUT
it does not bring the delta ,rather each time it brings in ALL records to PSA . This is the problem m facing .
PLEASE EXPLAIN ME IF YOU CAUGHT ANY MISTAKE IN THE ABOVE FOLLOWED STEPS.
waiting for reply
Manish Sharma

Hi Teja,
Thanks for your reply, I checked the same .
The initstate field has the value 'X'.
I checked in RSA3 but upon test extraction it says 0 records selected.
Pls investigate more on this.
Manish

How to enable the Delta for the data source 0CO_OM_OPA_7

Hi Experts,
I have a business content data source 0CO_OM_OPA_7 and I need to activate and enable Delta for this data source.
This data source is activated (but not delta enabled) and used for full load in my system for the past three year. As this is a full load this data source is carrying more than 4 million records every day with adding 2 millions records every year. The load takes every day 4 to 5 hours for completion.
Now I need to enable the delta for this data source. To enable the delta for this data source I used the transaction RSA5 and clicked on the 'Activate DataSources' but the data source is not enabled the 'Delta'
I have also checked in the RSA6 transaction, the check box for 'Delta' is not checked for this data source.
Can anybody help in enabling the 'Delta' for this data source.
Thanks in Advance
Narendra

Hi,
DS "0CO_OM_OPA_7" won't support deltas, so load to ODS then to Cube. Else delete the overlaping request then load this you can set in InfoPackage level.
You check any Period/Month fields in 0CO_OM_OPA_7 then write simple routine in Infopackage and the set the overlaping deletion.
Use the followng code and change it for your requirement in Infopackage level.
I'm using 0CO_PC_01 DataSource, so it won't have delta so I'm using the following code in InfoPackageag and set delete overlaping req. So eveyday it will delete the old req for that period and then it will load data againg for that period (Full loads).
DATA: l_idx LIKE sy-tabix,
        zzdate LIKE sy-datum,
        zzbuper LIKE t009b-poper,
        zzbdatj LIKE t009b-bdatj,
        zzperiod(7) TYPE c.
READ TABLE l_t_range WITH KEY
       fieldname = 'FISCPER'.
l_idx = sy-tabix.
zzdate = sy-datum - 1.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
    EXPORTING
      i_date               = zzdate
*             I_MONMIT             = 00
      i_periv              = 'V3'
           IMPORTING
     e_buper              = zzbuper
     e_gjahr              = zzbdatj.
*           EXCEPTIONS
*             INPUT_FALSE          = 1
*             T009_NOTFOUND        = 2
*             T009B_NOTFOUND       = 3
*             OTHERS               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONCATENATE zzbdatj zzbuper INTO zzperiod.
l_t_range-low = zzperiod.
l_t_range-option = 'EQ'.
l_t_range-sign = 'I'.
MODIFY l_t_range INDEX l_idx.
Thanks
Reddy

Delta using generic data source

Hi experts !
How can i create a delta using generic data source ? i am using BW 7.0.
Thanks.

Dear FABRICIO VAZ DE SOUZA ,
Generic extraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
step by step procedure for generic extraction delta
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Refer:
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
http://help.sap.com/saphelp_nw04/helpdata/en/3f/548c9ec754ee4d90188a4f108e0121/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Hope it helps you,Revert me back if you have any queries
Assign points if helpful
Regards
Bala

How do I enable "Access data sources across domains" in firefox?

Couple of links do not work on my firefox however they work fine on IE. This is because the "Access data sources across domains" is enabled in IE and i am not sure on how to make this setting enable on Firefox as well.
Please provide the steps to enable "Access data sources across domains" setting in Firefox.
Please help!

This should add the permanent exception:
[https://support.mozilla.org/en-US/kb/connection-untrusted-error-message#w_bypassing-the-warning Connection Untrusted Error Message: Bypassing the Warning]
However if it is not staying until the next time that the user opens up Firefox, is it possible that they are in permanent private browsing? [[Private Browsing - Browse the web without saving information about the sites you visit]] - that should have instructions to get in and out of it.

How to set up Deltas in FI data sources

How to set up deltas for FI Data sources & can any body give me the list of the Finance data sources...
please help me..

Standard FI data sources:
0FI_GL_4 (G/L Accounts- line items)
Takes the data from the FI document tables (BKPF/BSEG) that are relevant to general ledger accounting (compare table BSIS).
0FI_AP_4 (AP-line items) and 0FI_AR_4 (AR- line items
Selections are made from tables BSID/BSAD (Accounts Receivable) and BSIK/BSAK (Accounts Payable)
How the data extraction happens?
In FI extraction 0FI_AR_4 and 0FI_AP_4 are linked with 0FI_GL_4 in order to maintain consistent data transfer from OLTP system (it is called coupled data extraction, Ref OSS notes 428571).
Note: Uncoupled" extraction possible with Plug-In PI 2002.2, see OSS note 551044
0FI_GL_4 writes the entries into the time stamp table BWOM2_TIMEST in the SAP R/3 System with a new upper limit for the time stamp selection.
And now, 0FI_AP_4   and 0FI_AR_4 will copy this new upper limit for the time stamp selection during the next data extraction in the SAP R/3 System. This ensures the proper synchronization of accounts payable and accounts receivable accounting with respect to G/L accounting.
Full load: Not a valid choice because of large volumes of detailed R/3 transaction data.
Delta load:
Note: Here the delta identification process works differently for new financial records and for changed financial records.
New Financial accounting line items which are posted in SAP R/3 sytem will be identified by the extractor using the time stamp in the document header (Table BKPF-(field) CPUDT).
By scheduling an initialization IP all the historical data can be loaded into BW from the application tables and it also sets "X" indicator in field LAST_TS (Flag: 'X' = Last time stamp interval of the delta extraction).That means after the last delta, initialization was done.
OLTPSOURCE     AEDAT/AETIM     UPD     DATE_LOW     DATE_HIGH     LAST_TS
0FI_GL_4     16 May 2007/20:15     Init     01 Jan 1990     15 May 2007
0FI_GL_4     24 May 2007/16:59     delta     16 May 2007     23 May 2007
0FI_GL_4     21 June 2007/18:12     delta     15 June 2007     20 June 2007     X
0FI_AP_4     18 May2007/21:23     Init     01 Jan 1990     15 May 2007
After this, daily delta loads can be carried out depending on timestamp by scheduling delta info packages.
During the delta load , the SAP R/3 system logs two time stamps that delimit a selection interval for a Data Source in table BWOM2_TIMEST(fields TS_LOW and TS_HIGH).
FI -Delta Mode:
A time stamp on the line items serves to identify the status of the delta. Time stamp intervals that have already been read are then stored in a time stamp table (BWOM2_TIMEST).
(Info object 0Recordmode plays vital role deciding delta's .Check the field "delta "in ROOSOURCE /RODELTAM table to identify the image)
The Financial Accounting line items are extracted from the SAP R/3 system in their most recent status (after-image delta method).
AIE: This delta method is not suitable for filling Info Cubes directly in the BW system. To start with therefore, the line items must be loaded in the BW system in an ODS object that identifies the changes made to individual characteristics and key figures within a delta data record. Other data destinations (Info Cubes) can be provided with data from this ODS object.
It uses delta type E(pull) means the delta data records are determined during the delta update by the data source extractor, updated to the delta queue and passed on to BI directly from there.

To enable delta in generic data source

Hi,
There is a generic datasource created on top of PRPS & RPSCO tables. Currently the extraction mode is 'full update'.
There is no time stamp field available in RPSCO, Please suggest how can I enable delta?

Hi
Make sure at least you have Numeric pointer or time stamp field in your table to make the data source enable.
If you created view on these two tables, then in RSA6 --> open the data source --> goto edit mode.
here you will delta enable check box --> select this check and you can give the field which has to be used for delta.
If you using FM, then you have to write to code in functional module.
Regards,
Venkatesh

Delta field for Data Source 0BP_RELATIONS_ATTR

Hi Experts,
I need to know how to find which field is Delta enabled for standard Data Sources.
In my requrement for Data Source 0BP_RELATIONS_ATTR.
As the Data Source is being accessed by BODS sysetm and they need to know the Delta field to extract delta.
Thanks
Basheer

Hello,
Are you using Crystal Reports? If not I believe you should be posting your question to one of the Classic SAP forums:
http://forums.sdn.sap.com/index.jspa#45
Please mark as answered also.
Thank you
Don

Delta on Customized Data Source

Hi all,
Our requirement is we want to make one customized data source as delta enable. First is it possible? please give me some document or share real experience so that it will be easy to explain to the peoples out here.
I need a detailed explanation please.
amit

Hi,
This can be done as you will need a date field or a numeric pointer orr timestamp kind of field in the data source to make it delta enabled.
Here is the link on how to make generic data source and make them delta enabled.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Thanks
Ajeet

0PROD_HIER_TEXT , have to load delta from this data source.

Hi Experts,
The standard data source : 0PROD_HIER_TEXT .
Is it Delta enabled?
Or how can we load delta from this?
Any help would be valuable.
Thanks & Regards

Hi Mansi,
Thanks for your help.
As I mloading the data in Period wise, are we sure that we get the total data to DSO2
Repair full at a time for all the historical data for about 2 years at atime is not possible so any other way to achieve this?
Thanks in advance.

Error while doing DELTA Extraction (generic data source)

Hi BW Experts,
In my R/3, I have a generic data source ZBUT_VW.
It receives data from a View which is created based on couple tables.
When I do full load to the corresponding ODS, it is successful.
But after that I delete the ODS and created CUBE with DELTA
I have Initialized delta.
When I do DELTA extraction, it fails.
The error The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
I delete the initialization load and trying to do DELTA extraction again and it Fails.
With the same error
Please let me know how can I resolve this problem.
URGENT
gaurav

I dont think it is possible to have to additive delta with creation date.
Try a full load to cube to check if the extractor is working.

Delta queue & XML data source

Hi All
Can any body pls tell mme as to what this delta que ais and where is it used and how is it created,and also i want to know what is this XML Data source.
I need to get the data from XI,so i need this integration.
I would be very thank ful if any body cuold suggest me with a link on the notes ar step by step formatt.
Point's will be awarded,Thanks in advance.
Kittu

Hi Jay,
From Delta queue(RSA7) ur BW system is going to fetch the records of R3 or source system.
After extraction process it reaches RSA7 from there when u triggers infopackage
the job is ready to flood ur D.target with records.
Ensure that records are there for corresponding D.source this has to be attained thro' various Update methods(v3).
DataSource that is generated in SAP BW on the basis of a file-DataSource and
that can be used to push data to SAP BW
for more info on creation of XML D.source refer the link
http://help.sap.com/saphelp_nw04/helpdata/en/fe/65d03b3f34d172e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0b/3bc73b24062b48e10000000a11402f/frameset.htm
Reward if it's useful.
Thnks,
Karthick.

Delta for Generic data source.

Hi,
I have created a generic data source for which I have taken the change data as generic delta in CRM4.0. But the problem is delta is not getting initiated. like we are not getting any records in delta. Kindly guide me what else i have to do to get this delta
Thanks
Naveen

Hello Naveen,
What is the delta method you have used, is it Time stamp or ALE Pointer?
See this SAP Note 539547 Generic delta with date does not work
Please see these docs as well
[How to Create Generic Delta|How to Create Generic Delta]
[How to Create Generic Data Sources which use the Delta Queue (NW7.0)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b68b99-022e-2a10-999d-c4dc9ec24a59]How to Create [Generic DataSources Which Use the Delta Queue (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf]
Thanks
[Chandran|http://chandranonline.blogspot.com/]

Delta-enabled 0MAT_PLANT_TEXT data source?

Similar Messages

Maybe you are looking for