Delta is not working for custom appended fields (ZAKNA1) form R/3 to CRM

Hi, This question pertains to Customer Master (KNA1) replication from R/3 4.7 to CRM 5.0 system via middleware.
Standard fields are working fine. The custom fields also replicate fine during initial load and request loads however, delta is does not seem to be working. Any ideas or suggestions highly appreciated...Thank you.
Best regards,
---Manohar

Hello,
it's a long way since you post this question. I'm facing a similar problem. When i enter XD02 and change only something in the classification system, the trigger for CRM update doesn't happen. Only if i change also a master field...
I needed the force the trigger so he can update correctly when the system is only changed in the classification system.
At the time (3 years ago...:)) did you remember if you found a workaround for your problem??
Thanks,
Best regards,

Similar Messages

Reverse Engineering is not working for custom

hi odi guru's
i installled Hyperion 11.1.2.2 and ODI 11.1.1 . while doing reverse engineering is not working for custom purpose.
Iam working with Hyperion Financial management with odi. created dataserver and physical schema and logical schema
and imported RKM HYperion Financial Management Knowledge module.
is it required for hyperion latest patches to connect with odi. Please let me know . urgent?
Thanks in adavnce

hi
is it required for hyperion patches to connect with odi?
iam getting following error.
ODI-1217: Session HFM_Model (5051) fails with return code 7000.
ODI-1226: Step HFM_Model fails after 1 attempt(s).
ODI-1229: An error occurred while performing a Reverse operation on model code HFM_MODEL.
Caused By: org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 38, in <module>
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
     at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
     at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 38, in <module>
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
     at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
     at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
     at org.python.core.PyException.fillInStackTrace(PyException.java:70)
     at java.lang.Throwable.<init>(Throwable.java:181)
     at java.lang.Exception.<init>(Exception.java:29)
     at java.lang.RuntimeException.<init>(RuntimeException.java:32)
     at org.python.core.PyException.<init>(PyException.java:46)
     at org.python.core.PyException.<init>(PyException.java:43)
     at org.python.core.Py.JavaError(Py.java:455)
     at org.python.core.Py.JavaError(Py.java:448)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
     at org.python.core.PyObject.__call__(PyObject.java:355)
     at org.python.core.PyMethod.__call__(PyMethod.java:215)
     at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
     at org.python.core.PyMethod.__call__(PyMethod.java:206)
     at org.python.core.PyObject.__call__(PyObject.java:381)
     at org.python.core.PyObject.__call__(PyObject.java:385)
     at org.python.pycode._pyx1.f$0(<string>:38)
     at org.python.pycode._pyx1.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java:165)
     at org.python.core.PyCode.call(PyCode.java:18)
     at org.python.core.Py.runCode(Py.java:1204)
     at org.python.core.Py.exec(Py.java:1248)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     ... 19 more
Caused by: com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:58)
     at com.hyperion.odi.hfm.ODIHFMAppReverser.connect(ODIHFMAppReverser.java:27)
     at com.hyperion.odi.common.ODIModelImporter.importModels(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
     ... 33 more
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: Error occurred while loading driver.
     at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:29)
     at com.hyperion.odi.hfm.ODIHFMAppConnection.<init>(ODIHFMAppConnection.java:51)
     ... 40 more
Caused by: com.hyperion.odi.hfm.wrapper.HFMException: no HFMDriver in java.library.path
     at com.hyperion.odi.hfm.wrapper.HFMDriverJNI.getDriver(HFMDriverJNI.java:23)
     at com.hyperion.odi.hfm.wrapper.HFMServer.<init>(HFMServer.java:26)
     ... 41 more
please help me , thanks in advacne

Transaction launcher not working for custom business role

Hi Experts,
I am facing a very weird problem where the transaction laucher define for BOR transaction is working for one business role(Z business role Customized one) but its not working for other business role (Z business role).
to emphasize further we have the code:-
case ls_attributes-object_type.
    when lc_z23 or lc_z25.
      lv_logical_link = lc_ZITISU.
    when lc_BUS2000115.
      lv_logical_link = lc_ZITERP1.
    when others.
      lv_logical_link = lc_ZITERP2.
endcase.
l_if_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
IF l_if_navigation IS BOUND .
Navigate to transaction launcher using link id
    l_if_navigation->navigate( iv_link_id = lv_logical_link ).
ENDIF.
in this the logical link is is lc_ZITISU whenever this BSP application is called from both the business roles but in one the window opens up for BOR transaction whereas when we login again using different business role the code is the same as given above. I mean the sam logical link id is used and navigated to but window is not opening for transaction launcher as it happens for the previous business role.
Request your help to resolve this issue.
Thanks,
Rajwin

Hi,
I tried by applying the PFCG role id of business role which was working to the business role id of the one for which it wasn't working and then try testing whether the transaction launcher is triggering. But the transaction launcher screen is still not opening even after doing this.
Probably there's something else too which is causing the problem. Request your inputs on this,
Thanks,
Rajwin

Is join field value does not work for Custom object 4 to 15

Hi Everybody
I have Custom object 7 as Related Information to campaign object. I want to pull data from campaign to Custom Object 7. I tried with join field value function, but i am getting error.
Is Custom object 4 to Custom Object 15 not exposed with join field value function.
Can we pull data from child to parent or it is always other way ????

Hi,
JoinFieldValue is not supported in Custom Object 04-15.
Thanks & Regards
Sablok

ALV Filter : Not working for a text field - Strange problem

Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.

Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav

Deltas are not capturing for the enchanced field

Hi Friends,
We have enchanced 2LIS_11_VAITM datasource with custom field called customer requested date.
For initial setup i can see the data for this field in BI. But when user changes the customer requested date then this is capturing in deltas.
can any one know the reason behind this.
But when i run set tables for the particula Sales document number i can see the data for this field.
<removed by moderator>.
Best Regards,
Reddy.
Edited by: Siegfried Szameitat on Dec 23, 2008 4:38 PM

Hi,
when u replicated those fields are appering in bw side? if not by default the enhanced fields in hide condition for that fields data will not come ,if it is the case go to the RSA6 and select ur datasource and go to the change mode and deselect the hide check box in extraction structure of datasource and do the activation and do the replication in bw side
if the fields are came in bw side then u check in transferstructure either the fields assigned to correct infoobjects or not then check the update rules either those fields assignd or not.
Thanks & regards
k.sathish

OLSP not working for custom rule criteria to filter BWKEY

Hi,
I am using PC10.0.
I created a rule criteria for BWKEY values and assigned. I assigned it the table T001K and the connector to the target system.
I then assigned it to custom made OLSP. However when the results come out, it doesn't consider the values I entered within the filter for BWKEY.
The filters for the rule criteria that I created don't work. However the filters for the SAP provided rule criteria; 'COMPANY CODE' works.
The tables in my configurable subscenario include MBEW and T001K, both of which have BWKEY. The business rules don't use the same filters as that of the OLSP.
I can't find any error. The OLSP filter just doesn't want to work when I run the job. Certain BWKEY records within MBEW remain within the job results.
I've attached images of the rule criteria.
What could be the problem and how can I resolve it?
Thank you.

Based from what I've found, OLSP seems to only work for:
Sales Org
Plant
Company Code
Purchase Org.
Is there an SAP note that can be used to get OLSP created from custom rule criteria to work in PC10.0?

Bind.ref not working for dynamically added fields

I am working on a template that has a table with rows added at the run time. I have to attach fields in each row to an XML tag and child tags. I am using SOM Expression to identify each field in the run time. I have written the code to go in a loop and bind the field at run time but it was not working. So I am just kind of trying out for binding one field using the SOM Expression.
This code was written in the initialize event of the TextField2 with Java Script as the scripting language.
var fieldPath = xfa.resolveNode("xfa[0].template[0].Message[0].Page1[0].Table1[0].Row1[" + 0 +"].TextField2[0]");
fieldPath.bind.ref = "$record.COMMAND.sendApplicationInformationRequest.formNumber";
xfa.form.remerge;
I also tried by changing the reference this way but no luck..
var fieldPath = xfa.resolveNode("xfa.template.Message.Page1.Table1.Row1[" + 0+ "].TextField2");
Can any one help on this?
Thank you
Srini

Hi Steve,
Thank you for your response..
I could not able to open your attachments.. They both say QUEUED..
dynamic-subform-with-data-binding.pdf (150.4 K) QUEUED
form1.xml (533 bytes) QUEUED
Thanks
Srini

Document splitting not working for customer & vendor Payment

Hi,
We have actived Document splitting on profit center for segment level reporting.
In below scanario Document spliting working fine.
Vendor Invoice (Docuement type - KR)
General Ledger view
Expense Dr 1000      PC1
Vendor   Cr 1000     PC1
At the time of Payment (General ledger view) (Document Type - KZ)
Vendor Dr 1000        PC1
Bank     Cr   1000       PC1
In the above scanario we dont have any issue, Based on invoice profit center spliting automaticlly in bank in General Ledgerview.
How ever in the below scanario Document spliting is not working in payment
No issues in Invoice
General ledger view
Exp Dr 1000 PC1
Exp Dr   1500 PC2
Vendor Cr 1000 PC1
Vendor Cr 1500 PC2
When we make payment to vendor Document splitting is not working, it get splitting in zero balance clearing account
vendor Dr 1000 PC1
Vendor Dr 1500 PC2
Bank     Cr 2500 (No profit Center)
Doc splitt A/C 1000
Doc Split A/C 1000 PC1
Doc Split A/C   1500
Doc Split A/C    1500 PC2
My Finance Team requires automatic split up in bank based on vendor profit center.
We are using Business Transation 1000 (Payment) for document Type - KZ & DZ.
Regards,
Lokesh

Can you please confirm if the following settings exist in your system in various IMG nodes.
1. Bank G/L account is assigned to item category 04000 (IMG node: Classify G/L Accounts for Document Splitting).
2. Document type KZ is assigned to business transaction 1000 and transaction variant 0001 (IMG node: Classify Document Types for Document Splitting).
3. In IMG Node "Define Document Splitting Rule", under the method that is assigned to your company code, transaction 1000 and variant 0001, you see 04000 as one of the item categories to be edited.
4. If the answer for (3) above is yes, if you double-click on 04000 item category line, the processing category is set to 1 (Splitting based on base item categories).
5. Now when you double-click on 'Base item categories', you see 03000 - Vendor as one of the base item categories in the list there.
Please respond with Y / N to the above questions and we can go from there.

Controller Error is not working for Custom Responsibility

Hi All
I create a controller , Its working with Standard Responsibility. I am Setting two Values , One from database Column and other from calling a custom funciton . Its working in Standard Responsibilty.
But same thing I am trying in Custom Responsibility , Its showing One value ie database value, But not The function return value.
Is it the issue with security?

hi Gyan,
ex;
XXResp is custom Resp : Profile attach is HR Security Profile
If you remove this Security Profile , the Controller Works.
But if u set the Controlller it does not work.
Thanx

Transfer OTL to Payroll is not working for Custom Field Values

Hi,
We have Extended the Payroll and Project layout in OTL to include custom fields.
Now linked the fields to Element entries input values.
The issue happens when a retro batch is processed and transfered to Payroll the input values are not getting pulled properly.
i.e. The retro batch creates a positive value for the new retro entry and a Counter negative value for the old record.
Only in the case of Negative value, the issue is happening. For the positive value it is pulling the record properly from the custom fields.
Can you please let me know, how to debug the same.
Also this issue happens randomly not all the employees are facing this issue.
Thanks,
Raja Rajan

Hi Rsn,
just check the put this code in
1st way--
jjust import the api in your custom Action class
import com.sap.isa.core.logging.IsaLocation;
private final static IsaLocation log = IsaLocation.getInstance(ZcustomeAction.class.getName());
then
log.error("value"+value);
in this way you can debug the code...if not possible thenn...
you can write...
System.err.println("value"+value);
you can also try to this way..i think it will work now
Thanks
Jati

Check table not working for custom field in tcode CAT2.

Hi Guys,
I have created a ZCITY table for Plant which has below 3 field
Code (5 Char) u2013 Key field
Spras (2 char ) Language u2013 Key field
Description (40 Character)
I have added a custom field ZZCITY in CI_CATSDB with check table as ZCITY.
Now in tcode CAT2, when I enter the city code (eg. 12345) thru keyboard. 12345 does not exist in table ZCITY.
System is not giving any error message.
How I can I validate the input data using check table.
Thanks,

HI
At the Domain Level of field ZZCITY enter the VALUE TABLE field in the Value Range Tab of the Domain.
Cheers & Happy Diwali
Ram

Transaction launcher not working for custom business role in WEB UI

Hi Experts,
we have maintained a link for activity reports in web Ui which triggers a program Z_CRM_TIME_REPORT . we have maintained the logical links and assigned them to the custom business role. when we run the program in SE38 in GUI its working fine but we are facing the problem when we click the link in WEB UI we get a different screen related to BP and not the activity report.Kindly suggest what are the configuration need to be tested.
Thanking you,
Deepa

My guess would be that the parameter stated in the logical link (navigation bar customizing) that you use is incorrect. This should be the name of the transaction launcher definition you have maintained.
Otherwise, check the transaction launcher wizard to see that the report is maintained correctly.
Hope this helps.
Regards,
Pieter Rijlaarsdam

Trasnferpage is not working for custom page in peopletool 8.52

Hi all,
We are upgrading to peopletool 8.52.
Issue : Record filed people we are using transferpage function to redriect to cutom page (standard page). But page keep processing not transfering to page... Same is working in peopletool 8.51
We have all persmission in place for that page.
Regards,
Venkat Mandati

Hi,
Is the page in the same component from where you want to do the transfer?
Are you sure this is not a secondary page?
Which PeopleCode event is used to do the transfer?
Can you post the PeopleCode command that you are executing?

Duplicate command is not working for custom importer

Hi All,
I am working on a custom importer plugin. Basic features are working fine, but, I'm facing an issue with Duplicate functionality.
I added a new custom importer clip to project and created a duplicate of that clip (by right clicking the clip in Project window and selecting Duplicate from pop-up menu). Then I added both clip instances to timeline. Now, if I change properties of one clip instance it reflects in both clips. I noticed that both ClipIds are same and they are referring to same media path. I also observed the same behavior in SDK_Custom_importer sample. But, built in 'Color Matte' and 'Title' clips works fine.
As per my understanding, Duplicate command should create a new clip from existing clip and new clip should be independent of original clip after creation.
How to fix this issue? Is there any selector that I should handle to support Duplicate functionality?
Thanks & Regards,
Chandan

Hi Chandan,
The Color Matte and Title clips are not quite the same as your custom importer example. Those are synthetic clips, without a file reference on disk. If you exported a title to a file on disk, and then reimported it, and duplicated it so that there were two clips in the Project panel that reference the same file on disk, I think you would have the same behavior as what you're seeing with your custom importer. Duplicate doesn't create a new file on disk. The user would need to do that manually, and then import the new file.
Regards,
Zac

Delta is not working for custom appended fields (ZAKNA1) form R/3 to CRM

Similar Messages

Maybe you are looking for