Demo (Evaluation) Site Collection

Hi,
I have migrated SP 2010 farm (content database, service app databases...) to a new SP2013 farm.
I used TechNet guide to do that, and it all went fine.
I now have fully functional SP2010 site collation, in SP2013 server.
Before doing site collection upgrade, I wanted to create a Demo Site (Evaluation site), so I can verify that everything is working in SP2013 mode.
I started the creation process of Demo Site try Site Upgrade page in Site Settings. After that I got email that said everything is OK, it will take 2-4 days to create demo site.
After that I started timer job named "Create Upgrade Evaluation Site Collections job " on that web application. This time job run about 30min.
Five days has passed since than, and demo site collection hasn't been created.
I tried to check status, using Get-SPSiteUpgradeSessionInfo command, but it has return nothing. I tried using Site and Database switch, but nothing.
Also when, I go to the Site Collection upgrade page, and tried to run Demo Upgrade again, it said that it is still working.
My question is eider how to stop this demo creation, and start all over, or how to find some status or some info in log files that could point me in some direction, that could help me to create demo site.
Thanks
Alex

We were finally able to get past this last year and I forgot to follow up.
It appears to have been a bug prior to the August 2013 CU. Basically if a site collection eval was requested and there was any issue with creating it, it just kept trying and trying. I worked with MS engineering and all we were able to do was
to get the sites removed from the upgrade queue. To do this I had to manually edit the PreviewSiteRequests table inside of the content database that is identified in the failed timer job details. If you look at the PreviewSiteRequests table and
notice entries in there with a status of 5 or with a requested date that is older than it should be, then this is likely your culprit.
So to stop the timer jobs from trying to create eval sites over and over again every night, we deleted the entries in the affected content database > previewsiterequests table that corresponded to the sites that were failing to have an eval site created
nightly.
HOWEVER I am not encouraging you to delete these entries without the direct guidance of MS tech support. I'm just sharing my experience with the community.
Thanks,
Brandon

Similar Messages

Create Upgrade Evaluation Site Collections Timer Job does not send notification Email when the Site is created

Hello Everyone,
My problem is:
The Create Upgrade Evaluation Site Collections job does not send a Notification Email when the Eval Site is created. I only get a notification E-Mail that mention that a Upgrade Evaluation Site Colletion is requested and then after 27 Days that the Evla
Site will be deleted in three Days.
My Enviroment:
SharePoint Foundation 2013 Sp1 on Windows Server 2012
Exchange 2010 SP3
I hope someone can help.
best regards
domschi

Hi domschi,
As I understand, you didn’t receive email generated from Create Upgrade Evaluation Site Collections timer job. While you might receive email generated from Delete Upgrade Evaluation Site Collections.
When you request an evaluation site collection, the request is added to a Timer job
which runs once a day. You will receive an e-mail message when the upgrade evaluation site is available. This might take up to 24 hours. The message includes a link to the evaluation site. Upgrade evaluation site collections are set to automatically
expire (after 30 days by default).
Please go to CA > Monitoring > Review Job Definitions, locate issue timer job and click Run Now. Then go to Job History and check if the issue job failed to run.
Also, please check if the email are received by Exchange Hub server.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Unable to upload Files to child site collection using REST

Dear All,
I referred this article http://www.shillier.com/archive/2013/03/26/uploading-files-in-sharepoint-2013-using-csom-and-rest.aspx for uploading documents to SP Document Library and it works fine for any document library under the root site collection(
for example "http://<server name>/Shared Documents" but when i upload the same document to one of the sub site collection created using Managed Path( the site collection path is "http://<server name>/files/Case" and the library
name is "records") it fails and i get below error:
The security validation for this page is invalid. Click Back in your
Web browser, refresh the page, and try your operation again, Error Code -2130575251 Microsoft.SharePoint.SPException"
Any help suggestion to resolve this? I've almost tried everything to resolve this issue but no luck.. appreciate any help
for this..
Regards,
Vishal

Hi,
According to your post, my understanding is that you had an issue uploading files to subsite using REST.
I had made a simple code demo below, it will upload a file to Document Library after you make your selection with the File control.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
function uploadFile(){
//alert(2);
if (document.getElementById("file").files.length === 0) {
alert('No file was selected');
return;
var parts = document.getElementById("file").value.split("\\");
var filename = parts[parts.length - 1];
var file = document.getElementById("file").files[0];
uploadFileSync("http://YourSite", "Documents", filename, file);
//Upload file synchronously
function uploadFileSync(spWebUrl , library, filename, file)
//alert(3);
var reader = new FileReader();
reader.onloadend = function(evt)
if (evt.target.readyState == FileReader.DONE)
var buffer = evt.target.result;
var completeUrl = spWebUrl
+ "/_api/web/lists/getByTitle('"+ library +"')"
+ "/RootFolder/Files/add(url='"+ filename +"',overwrite='true')?"
+ "@TargetLibrary='"+library+"'&@TargetFileName='"+ filename +"'";
$.ajax({
url: completeUrl,
type: "POST",
data: buffer,
async: false,
processData: false,
headers: {
"accept": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val(),
"content-length": buffer.byteLength
complete: function (data) {
//uploaded pic url
console.log(data.responseJSON.d.ServerRelativeUrl);
error: function (err) {
alert('failed');
reader.readAsArrayBuffer(file);
</script>
<input type="file" id='file' onchange="uploadFile()"/>
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Jason Guo
TechNet Community Support

What is the best alternative to exclude results from a specific site collection

Hi,
We want to exclude results from a specific site collection (for example http://server/sites/demo").
A few ways are being considered:
1. Copy the Local SharePoint Results Result Source and edit it not to include results from that site collection and then set the new custom result source as default.
2. Edit the Search Results WP in the "Everything" tab to exclude those results (edit the query there)
3. Set a query rule on "Local SharePoint Results" to exclude the results from the Demo Site Collection
What is the best?
keren tsur

Hi Keren,
Modifying the Local result xlt will give you the most granularity but it is also arguably more challenging because of the "editing code" portion
On your search page you could append a query string via the search webpart but that may not get granular enough.
In the past I have used search scopes to exclude items in search results. Depending on the specific requirement it may be a quick and easy way to accomplish your task. it really depends on how ganular you need to get with excluding items from results.
A search scope can be setup be going to:
1. Site Actions (of the site collection you want to apply this to)
2. Click on Site Settings
3. Under site Collection Administration ( you have to be a site collection admin or farm admin to be able to see this section)
4. click on "Search Scopes"
5. Click on New Scope
6. Name it, fill out any other options you want and click "ok"
7. Click on your newly created search scope.
8. click on "new rule"
9. Fill out the fields based on your requirements and then click "OK"
10. I believe you will want to wait for a search to index to run before this scope will return any results.
Please let me know if you have any other questions.
Good Luck!
Alex

Syntax of a query rule to exclude results from site collection

Hi,
I'm trying to edit a query rule to exclude results from a site collection.
I'm coping the "Local SharePoint Results" and want to add something like -path=http://server/sites/demo/*
but somehow it doesn't work. can someone help with the exact syntax (should to write http, "", to write with {} etc.)
keren tsur

-SiteId:<guid>
should work. Or:
-path:http://server/sites/sitecollection
Thanks,
Mikael Svenson
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

SharePoint 2013 site collection search not working but data is indexed correctly.

I am currently having issues with the default search box on a site. No matter what I type in I can not get it to display any information. However, I see the content indexed in the search admin console. I created a new site with the Basic Search Template
and I am able to return items in the site using this site page.
I am looking at http://technet.microsoft.com/en-us/library/jj683115.aspx#BKMK_CreateResutlSource and I must be missing something or doing something wrong because on the site features or site collection features I do not have these settings
"On the Site Settings page,
in the Site Collection Administration section,
click Search Result Sources."
Any advice would be great.

I believe you're right. I have also found some other documentation that has helped me.
Thanks
http://blogs.msdn.com/b/sharepoint_strategery/archive/2013/05/25/alternate-access-mappings-explained.aspx
http://blogs.msdn.com/b/sharepoint_strategery/archive/2013/02/20/beware-crawling-the-non-default-zone-for-a-sharepoint-2013-web-application.aspx

User Profiles are the wrong style after importing/migrating site collections from other SharePoint versions

I manage a couple of different version of SharePoint, which we are in the process of migrating to SharePoint 2013. I have a problem which I am not sure how to resolve. We are using MetaLogix to migrate site and site collection data from an older SharePoint
2007/WSS3.0 server environment into our new SharePoint 2013 environment and we are having a problem with user profiles that get created.
I have SharePoint 2013 set up for "SharePoint Profile Synchronization" and some of our user's profiles are being created in an older format that shows the user's claims account information, rather than the more fancy profile type that allows us
to include pictures and click on "follow this person" links.
If we manually delete the profile, it will be recreated properly however, as we are migrating many sites and collections over, it is near impossible to do this and keep track of each user so that their profiles can be deleted and recreated.
Is there some way to change this behavior so that SharePoint will only create the newer style of user profile?

These 'profiles' are you looking at them in the User Profile Service Application itself or are you looking at site collections? There is a huge difference between the two but people often miss it.
In most cases you'll have some partial information on the Site Collections but when you click through to their actual profile (not just their User Information List entry) you'll see the prettier version. That information is normally internally synchronised
by a timer job but that may not have run yet and/or the fact that your users haven't actually used the site may be causing it not to update them (it's an efficiency matter).
Finally: Drop your sales guy at Metalogix an email, they will bounce it to one of their techies and they'll have seen it a million times.

Web application and site collection not accessibe

I have created a web application and a site collection. But when I tried to access the site by browser on the server the page cannot be displayed or the server cannot be found. What should I configure? Please say by detailed steps.

I created a host header extranet.xxx.xx and alternate access mapping is ok. But still I'm not able to access the site by http://server name:port no. It gives The web page cannot be found or this web page can't be displayed.
Now when I try with Firefox with http://server name:port no, it gives
"Bad request - Invalid hostname
HTTP Error 400. The hostname is invalid."
More: if I go to Alternate Access Mappings > Add Internal URL:s > Save is grayed out.
You have two options,
Option 1 : Accessing the web application without any host header name and with the port no you have created. (ex: (http://server1:5500 )
Option 2. Accessing it with the host header name (ex:http://mywebapp.contoso.com) you have created for which you need to create a DNS and set an AAM accordingly in the corresponding zone.
For the option no 1. you need to have a host header in IIS which would be created by default while you create a web application and it should be like this unless you did nit change it. http (Type)---blank host name--All Unassigned in the IP section---and
the port no in which you have created.
PS : If you have one more IP address in the server, its good to set the same IP address which is set for server for the name resolution to happen properly.
If you have n't specified the hostheader while creating the web application, then you need to add it manually with the existing one which is there for option no 1. It should be added as below. http---Mywebapp.contoso.com--IP address in which you have created
the DNS and Port 80.
If AAM save is grayed out, check it from some other browser. Also Hostname invalid clearly implies that there is some problem with the name resolution. Check whether you could ping the webapplication from the server where you are trying to access it.
Veeramani.S

Setup Team Foundation Server - Team Site Collection - SharePoint Web Application Settings failed with error TF205014, TF250025

Hi
I have TFS server installed and working with other SharePoint farm. (TFS installed, SharePoint extension installed and Granted Access for TFS.
When Setup TFS - SharePoint Web Application Settings, It ask for the three values:
Web Application URL:
Central Administration URL:
Default Location of team project collection sites:
What notice about the TFS sites that are working is that they are Path Based Site Collection. Created with SharePoint Web Application managed path (like
http://spserver/sites/tfs_site1) and so it easy to see it will work.
Web Application URL: http://spserver
CA URL :   http://spserver:portnumber
Default Location : Sites or any managed path
We start using Host Name Site Collection (HNSC) to get the benefit of multiple unique site name without having multiple web application for each. Work great but when we tried to setup and extend TFS service on the HNSC, we could
not get them to work and got errors when trying different variation of path URL.
After doing lot of searching on this, I came up pretty empty and I don't know if that is possible so my question is Have anyone able to setup TFS to work with SharePoint 2013 Host Name Site Collection?
If you have, a simple yes will be great but please share or even if anyone think it is possible or not possible, please share too.
Thanks in advance for any comment / suggestion.
Swanl

Hi Swanl,
I’m afraid that we cannot setup TFS to work with SharePoint 2013 Host Name Site Collection.
Also you can initial a new thread in Visual Studio Team Foundation Server forums：
Team Foundation Server – General: http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=tfsgeneral
More experts for Team Foundation Server will assist you, then you will get more information relation to your issue.
For integrating SharePoint 2013 with Team Foundation Server 2013 you can have a look at the following blog:
http://nakedalm.com/integrate-sharepoint-2013-with-team-foundation-server-2013/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Create a site collection with dedicated content db with the help of server object model

Hi,
I have a requirement to implement a create a new site collection with dedicated content db. i have got 2 PowerShell scripts which does the same. first i will create a content db and then create the sitecollection with contentdb
parameter with the created contentdb name.
Now the site collection created must contain few doc libs and few splists with look up columns, people picker data type, multiline of text, single line of text,choice field. hence i am thinking the below approach:
1) create a web template and include sp doclibs, splists , site columns in this.
2) i am thinking of a ui design to create the below:
These are called "projects" which is actually the site collection with the doclibs, splists and must be created by sharepoint admin on click of a link in my landing page.end users access these "projects" aka
"site collections" and uploads the documents into these projects and collaborate.
so my question is : On click of a button can I create a site collection with a dedicated content db based on the web template created with the hel of server object model?
The other approach is on click of this button call the power shell script which accepts the sitecollection name and contentdb name as parameter. is this possible in server obj.model ?
passing a paramter from code behind- visual web part ui to power shell ?
and it should create the site collec based on the web template and create the content db.
my doubt #3 : will it not throw error "request timed out" when creating the site collec and contentdb from ui ?

Try below:
http://sharepoint.stackexchange.com/questions/21606/programmatically-create-a-site-collection-in-an-existing-mounted-content-databa
PowerShell is just a wrapper for the object model. You shouldn't need to reference PowerShell in your feature, just create the new site collection with C# inside your feature. There's a blog post here that illustrates some code that may get you started.
http://blog.mastykarz.nl/programmatically-creating-sites-site-collections-custom-web-template/
http://blogs.msdn.com/b/vesku/archive/2014/06/09/provisioning-site-collections-using-sp-app-model-in-on-premises-with-just-csom.aspx
# Enable the remote site collection creation for on-prem in web application level
# If this is not done, unknon object exception is raised by the CSOM code
$WebApplicationUrl = http://dev.contoso.com
$snapin = Get-PSSnapin | Where-Object {$_.Name -eq 'Microsoft.SharePoint.Powershell'}
if ($snapin -eq $null)
Write-Host "Loading SharePoint Powershell Snapin"
Add-PSSnapin "Microsoft.SharePoint.Powershell"
$webapp=Get-SPWebApplication $WebApplicationUrl
$newProxyLibrary = New-Object "Microsoft.SharePoint.Administration.SPClientCallableProxyLibrary"
$newProxyLibrary.AssemblyName = "Microsoft.Online.SharePoint.Dedicated.TenantAdmin.ServerStub, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c"
$newProxyLibrary.SupportAppAuthentication = $true
$webapp.ClientCallableSettings.ProxyLibraries.Add($newProxyLibrary)
$webapp.Update()
Write-Host "Successfully added TenantAdmin ServerStub to ClientCallableProxyLibrary."
# Reset the memory of the web application
Write-Host "IISReset..."
Restart-Service W3SVC,WAS -force
Write-Host "IISReset complete."
If this helped you resolve your issue, please mark it Answered

Internet access to new sharepoint foundation 2013 site collection

I had sharepoint 2010 installed on my WHS 2011. I successfuly created a new web application and site collection. I created a new SP default site on a port different from 80 and restarted the WHS 2011 default site in IIS. I could
see both the WHS 2011 and SP 2010 default sites from the server, my client PCs, and from my office. Great!
I uninstalled SP Foundations 2010 and installed SP Foundation 2013. I successfully created a web application on the same port I had used for SP Foundations 2010 because the firewall rule on my server and the port forwarding on my router
where already in place. I again restarted the WHS 2011 default site in IIS. I can see the WHS 2011 and SP 2013 Foundation default sites from the server and my client computers. However, I can't see the SP Foundation 2013 site from anywhere outsite
of my home network.
Help someone?

1. I removed the IIS bindings to port 80 for the home server default site. Now, I can reach my share point default site remotely on port 80 by going to
http://x.home server.com and I can reach the home server default site by going to
https://x.homesever.com/remote on port 443.
2. Using Power Shell I created 3 host named site collections. I put the URLs to those collections in the server hot's file and disabled loopback. I can see the sites on hte server. However, how do I make my sites accessible remotely or maybe the correct
term is publicly on computers outside the network?
3. I started down the road of host named site collections because I want to make them accessible remotely or publicly without using the x.home server.com domain name. However, I am starting to think that I am missing an important piece to making this work.
Thanks

Applying theme to all sites in a site collection SharePoint Foundation 2010

I am working in SharePoint Foundation 2010 and want to apply a theme found in my top level site to all the remaining sites in the site collection. I found the following bit of code on-line and put it in a script:
function Apply-SPTheme([string]$SiteUrl, [string]$webName, [string]$themeName)
$site = new-object Microsoft.SharePoint.SPSite($SiteUrl)
$web = $Site.OpenWeb($webName)
$theme = [Microsoft.SharePoint.Utilities.ThmxTheme]::Open($site,"_catatlogs/theme/" + $themeName + ".thmx")
$theme.ApplyTo($web,$false)
$web.Update()
$web.Dispose()
$site.Dispose()
Apply-SPTheme "https://sitename" "" "themeName"
I call the function in the last line and the web site where I obtained the code indicated that this would put the theme in all other sites. When I run the script I get the follwing message:
You cannot call a method on a null-valued expression. At C:\applyTheme.ps1(the script file):6 char:16
$theme.ApplyTo <<<< <$web,$false>
+CategoryInfo: InvalidOperation: (ApplyTo:String) [], RuntimeException
+FullyQualifiedErrorId:InvokeMethodOnNull
I'm a novice programmer and particularly novice on Powershell. I'm not sure I understand what the problem is or how to fix it.
I'd appreciate any help.

I highly recommend going back to the SharePoint 2010 site and going through all of the fundamentals. If yo allocate an hour a day you should be caught up in two weeks. This will save you hundreds of hours of fishing for solutions.
SharePoint is far too complex to be "guessed" at. You will never guess at its structure. Going through the basics from the ground up will burn the structure of its design into you head. You will then be able to find answers quickly because you
will know the documentation and how to ask the questions.
If you are only a basic Admin then your company should allow the vendor to either do the configurations or pay for you to be trained or compensate you to use your personal time for training. It would be a win for them.
There are many very good books on SharePoint and PowerShell. They are only good if you already have the basics of both. One that I acquired recently is quite good at you level of involvement as it is a cookbook of solutions in PowerShell for
normal configuration and administration items that goes beyond what is available on the web site or in the basic training.
http://www.wrox.com/WileyCDA/WroxTitle/productCd-0470533331.html
I actually have the 2013 version but you should stick to the 2010 version until you are up to speed. I bought 2013 as a catch up. Read it over two long dinners of
Sushi and Sake.
The books run the gamut of SP from planning to admin. They are not technical manuals and not developer books. They are written for general administration, You will read through quickly and then refer back to chapters as needed. As
your SP site evolves the book will help you evolve with it.
Start by becoming extremely familiar with all of the resources on the SharePoint 2010 product site. Post future requests that are SharePoint related to the SP forums. They are very good with PowerShell at this time (three versions but they seem
to have caught up) - They know the product better than most here and are closer to the MS MVPs on SharePoint. If there is a pure PowerShell issue then the people in this forum can very helpful,
Here are all of the SharePoint forums:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/home?filter=alltypes&sort=lastpostdesc&brandIgnore=true
¯\_(ツ)_/¯

How to provide internet access for a site collection in SharePoint Foundation 2010

Hi all,
I am working on SharePoint Foundation 2010. I have to make a site collection available on internet.
Only one site collection is to be brought on internet rest of the site collections should not be accessible from outside.
How do I achieve this. Any help is greatly appreciated.
Thanks in advance.

Hello,
As per my knowledge, you have to create new Web Application for your site to publishing it to internet. Since internet settings can be done at web application so create new one and then backup your existing site and restore in new web app.
You can refer below thread for licensing:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b63b3643-d0c7-45d2-8372-364fda348ed0/sharepoint-foundation-licensing-on-internetfacing-server?forum=sharepointgeneralprevious
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Error Accessing Host Named Site Collections In SharePoint Foundation 2013

We have a new SharePoint Foundation 2013 server that has one web application two host named site collections. We get the "This page can't be displayed" message when we try to navigate to either of the site collections. Adding the server's IP to
the host file on the machine we are testing from doesn't help. We can ping the new sites from that machine. The web application does not have a host header.
Web application URL = http://servername
Site collection #1 URL = http://customer.company.com
Site collection #2 URL = http://vendor.company.com

Hi,
I recommend to verify the things below:
Check if site can be accessed with site collection administrator.
Add the SharePoint sites to a trusted zone to see if the issue still occurs.
As this issue can be caused by many reasons, you may check the ULS log for more detailed errors.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

SharePoint PowerPivot feature failing after site collection was backed up and restored (moved to new content database)

Hi there,
I am having some strange issue with my PowerPivot for SharePoint but can't figure out what is causing this. Here is what happened:
I setup PowerPivot (PP) for SharePoint and activate it on few site collections in production environment; I upload a PP workbooks in a library, manage the data refresh schedules, run the data refresh for an external SQL databases, etc. Everything works
fine for several days.
One day we decide the move one of the site collections (X) from its current content database to its own (new) content db. The way we did it is that we took the site collection backup in production, restored it in test environment (in its own content
db; we deleted the old site collection in test first before restoring), checked everything including PP data refreshes etc.; all worked fine.
Then we did the same thing in production - we deleted the old site collection X, restored the site collection from the same backup file that we used in test environment, everything works fine EXCEPT the PowerPivot refreshes!! :-(
I am getting these errors: When I click on the workbook, it gives this error "An error occurred during an attempt to establish a connection to the external data source. The following connections failed to refresh: PowerPivot Data"
When I click OK on error dialogbox, it opens the workbook fine but no slicers/refreshes work now. When I go back to the library and click on "Manage PowerPivot Data Refresh" to open the refresh history/schedule page, it gives this generic but scary
error: "An unexpected error has occurred. Troubleshoot issues with Microsoft SharePoint Foundation." ULSViewer or Event viewer is not showing anything related to this error!
Strange thing is that PP refresh works fine in Test environment, as well as on other site collections in production that we didn't touch (which tells me there is nothing wrong with my PP configuration). Did the backup/restore in prd cause anything? Did moving
it in its own contentdb cause anything? (But then why it works in test environment?) Is there anything wrong with site collection PP feature? Can force reactivating it help??????? I am just lost and going crazy now!
Please help.
Asif

I have found some entries in ULS logs seemingly relevant to this issue as below: Please help. Thanks.
Note: I have replaced urls with <url> or <server> and username with "domain\user".
ExternalSource.GetExternalKeyAndStateAndMarkUsed: Populating the session's credentials for external data. Index=0, Credentials=[14337250,
domain\user]
ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N,
WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://<url>/SQL_PowerPivotTest.xlsx, Version=Monday, 09 September 2013 06:29:42
Check whether "http://<url>/SQL_PowerPivotTest.xlsx" is in the farm.
Connecting to "http://<server>/_vti_bin/PowerPivot/Redirector.svc/?DataSource=/team/IT/SiteCollectionDocuments/SQL_PowerPivotTest.xlsx&LocaleID=1033".
WcfSendRequest: RemoteAddress: 'http://<server>:32843/0a4610a7f75f4ff582ca7329256f0fe3/SSASMidTierService.svc' Channel: 'Microsoft.AnalysisServices.SharePoint.Integration.IGeminiServiceApplicationClient'
Action: 'http://tempuri.org/IGeminiServiceApplication/GetDatabase' MessageId: 'urn:uuid:44f67e36-7ec2-4fe8-bd4c-277c9d9ddde7'
WcfReceiveRequest: LocalAddress: 'http://<server>:32843/0a4610a7f75f4ff582ca7329256f0fe3/SSASMidTierService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel'
Action: 'http://tempuri.org/IGeminiServiceApplication/GetDatabase' MessageId: 'urn:uuid:44f67e36-7ec2-4fe8-bd4c-277c9d9ddde7'
Entering monitored scope (ExecuteWcfServerOperation)
Obtaining routing information for the request using <SERVER> - User:domain\user, DataSource: http://<url>/SQL_PowerPivotTest.xlsx,
Version: 09/09/2013 06:29:42. (RequestStartTime=[<SERVER>])
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=10.7664521608193
EXCEPTION: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Unable to find the specified file. (Fault Detail
is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.IO.FileNotFoundException: Unable to find the specified file.
at Microsoft.SharePoint.SPFile.EnsureUniqueId()
at Microsoft.SharePoint.SPFile.get_UniqueId()
at Microsoft.AnalysisServices.SharePoint.Integration.Redirector.BackendRedirectService.GetDatabase(String loginName,
String dataSource, String versionLabel, DateTime fileLastModifiedTimestamp, Int32 localeId, Boolean collectHeathInfo, Boolean createLocal, String serverEndpointAddress)
at Microsoft.AnalysisServices.SharePoint.Integration.GeminiServiceApplication.GetDatabase(String loginName, String
dataSource, String dataSourceVersion, DateTime fileLastModifiedTimestamp, Int32 localeId, Boolean collectHeathInfo, Boolean createLocal, String serverEndpointAddress)
at SyncInvokeGetDatabase(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at Sy...).
Proxy encountered an error while trying to get the sandbox information. This request will be terminated
EXCEPTION: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: Unable to find the specified file. (Fault Detail
is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.IO.FileNotFoundException: Unable to find the specified file.
at Microsoft.SharePoint.SPFile.EnsureUniqueId()
at Microsoft.SharePoint.SPFile.get_UniqueId()
at Microsoft.AnalysisServices.SharePoint.Integration.Redirector.BackendRedirectService.GetDatabase(String loginName,
String dataSource, String versionLabel, DateTime fileLastModifiedTimestamp, Int32 localeId, Boolean collectHeathInfo, Boolean createLocal, String serverEndpointAddress)
at Microsoft.AnalysisServices.SharePoint.Integration.GeminiServiceApplication.GetDatabase(String loginName, String
dataSource, String dataSourceVersion, DateTime fileLastModifiedTimestamp, Int32 localeId, Boolean collectHeathInfo, Boolean createLocal, String serverEndpointAddress)
at SyncInvokeGetDatabase(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at Sy...).
PF_CHECK_ERROR returned 'critical hresult error' 0x80004005 ; Stack Trace:NA
PF_CHECK_ERROR returned 'critical hresult error' 0x80004005 ; Stack Trace:NA
PF_CHECK_ERROR returned 'hresult error' 0x80040e41 ; Stack Trace:NA
ConnectionManager.GetConnection: Failed to create new connection, exception=Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException:
Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass3.<CreateConnection>b__0()
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(WindowsIdentity wi, ExecuteImpersonatedMethod
method, Boolean dispose)
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(ExecuteImpersonatedMethod method, Boolean
dispose)
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsDelegation.TryExecuteImpersonated(ExecuteImpersonatedMethod
method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials,
ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId), sessionId=1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N,
connectionString=Provider=MSOLAP.4;Persist Security Info=True;Initial Catalog=Microsoft_SQLServer_AnalysisServices;Data Source=$Embedded$;MDX Compatibility=1;Safety Options=2;MDX Missing Member Mode=Error;Optimize Response=3;Cell Error Mode=TextValue pool
count=0
ConnectionManager.GetConnection: Caught an exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException:
Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass3.<CreateConnection>b__0()
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(WindowsIdentity wi, ExecuteImpersonatedMethod
method, Boolean dispose)
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(ExecuteImpersonatedMethod method, Boolean
dispose)
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsDelegation.TryExecuteImpersonated(ExecuteImpersonatedMethod
method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials,
ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnectionAndAddToList(ConnectionRequest
connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Boolean auditConnection, Int32 keyLcid, ConnectionInfo connectionInfo, ConnectionKey connectionKey, AutoReaderWriterLock autoPoolLock, Connection& connection, ConnectionList&
connectionList)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.GetConnection(ConnectionRequest connectionRequest,
ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Int64 privateConnectionId, Boolean auditConnection)
Refresh failed for 'PowerPivot Data' in the workbook 'http://<url>/SQL_PowerPivotTest.xlsx'.
[Session: 1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N User: 0#.w|domain\user]
ExternalSource.ValidateConnection: Unable to get a connection: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException:
Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInterop.InitConnection()
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.<>c__DisplayClass3.<CreateConnection>b__0()
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(WindowsIdentity wi, ExecuteImpersonatedMethod
method, Boolean dispose)
at Microsoft.Office.Excel.Server.Credentials.TryExecuteImpersonated(ExecuteImpersonatedMethod method, Boolean
dispose)
at Microsoft.Office.Excel.Server.CalculationServer.CredentialsDelegation.TryExecuteImpersonated(ExecuteImpersonatedMethod
method)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnection(Credentials credentials,
ConnectionInfo connectionInfo, Int32 keyLcid, Uri workbookUrl, Boolean auditConnection, SessionId sessionId)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.CreateConnectionAndAddToList(ConnectionRequest
connectionRequest, ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Boolean auditConnection, Int32 keyLcid, ConnectionInfo connectionInfo, ConnectionKey connectionKey, AutoReaderWriterLock autoPoolLock, Connection& connection, ConnectionList&
connectionList)
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionManager.GetConnection(ConnectionRequest connectionRequest,
ExtendedConnectionInfo extendedConnInfo, Credentials credentials, Int64 privateConnectionId, Boolean auditConnection)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.TryGetValidatedConnection(Request request, Credentials
credentials, ExtendedConnectionInfo extendedConnectionInfo, Boolean shouldReportFailure, Boolean auditConnection, Connection& connectionOut). sessionId=1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N,
externalSource=PowerPivot Data
ConnectionInfoManager.InitConnInfoFromOdcFile: ODC File Uri is not valid:
ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException:
Exception of type 'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown.
at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String
externalSourceName, Int32 externalSourceIndex, Boolean& shouldReportFailure)
at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo,
ExternalSourceStateInfo prevExternalSourceStateInfo, Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOperation, Boolean verifyPreOperationConnection), Data Connection Name:
PowerPivot Data, SessionId: 1.V24.1916ClMR0rOQ1F8mQPqtil0V90.5.en-US5.en-US73.-0600#0000-04-00-01T03:00:00:0000#+0000#0000-10-00-01T02:00:00:0000#-006036.7dcb49ef-0dc4-45d2-a0f8-4dc0e18a70f41.N, UserId: 0#.w|domain\user

Demo (Evaluation) Site Collection

Similar Messages

Maybe you are looking for