Dependencies for usermanagement in KM application
Hi,
I created a km portal application which uses the apis from the package com.sapportals.portal.security.usermanagement. Using the jarclass finder, I was able to find these jars/add them to the classpath/build and finally deploy.
However, when I convert this application to a DC, I get errrors on building the DC:
package com.sapportals.portal.security.usermanagement does not exist
[javac] ERROR: import com.sapportals.portal.security.usermanagement.IUser;
[javac] ERROR: ^
[javac] ERROR: import com.sapportals.portal.security.usermanagement.UserManagementException;
[javac] ERROR: ^
I've already added SC dependencies for KM-BC, KM-CM, JTECHS, J2EE, BUILDT, etc..
Under used DCs, I was able to add used dependency on DC tckmfrwk. However, I can't find the corresponding DC for 'com.sapportals.portal.security.usermanagement'..
Can anyone point me to the right SC/DC to include for the above? Thanks.
~Prachi
Hi Prachi,
when you use Development Components, then you have to add the required library as "Used DC" to our project. The libraries will be added automatically to your build path.
Try also to include the following SCs:
- SAP_JTECHS -> epbc.prtapi._api
- EP_BUILDT -> com.sap.security.api
Otherwise you have to include the required libraries as External Library.
Refer to this blog, it gives you an explanation of how to add an External Library DC.
[Using KM API in Web Dynpro Application using Development Components|https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/11509]
Best regards,
Denis
Edited by: Denis Schrodt on Jan 27, 2009 1:43 PM
Similar Messages
-
Application Dependencies for RAC DBs
What are application Dependencies for RAC DBs specially there connectivity, and High availability?
You'll probably get lots of suggestions based on lots of experiences, however, those things may or may not happen to your application. The best and always-applicable advice you'll get is that you absolutely must test your application in every possible scenario (and even scenarios you think are impossible) for how it reacts to failure as well as how it scales with parallelism and how much contention it creates due to its design. Create a realistic test environment, ensure you can produce realistic, real-world load on the application, and then start testing. With 11g, the load generation gets a lot easier to do with Real Application Testing. With earlier releases, it will be using more traditional methods/tools.
So, you'll get good advice, but it won't be a substitute for doing the actual testing work yourself with your application. -
Applications Dependencies for RAC DBs
What are application Dependencies for RAC DBs specially there connectivity, and High availability?
Hi, not must exist any dependency, for the applications must be transparent. The application only can see the service database where it cans connect and work.
Regards. -
No effect for registration the Partner Application SSO for OAS 10.1.2.0.2
Dear OAS experts, could you please help me with the problem, it worried me for weeks:
I have 2 OAS 10.1.2.0.2 on a different physical servers -
1) type Identity Management, host - OIDserver.mysite.ru, ORACLE_HOME = /d01/oracle/prd/imapp,
2) type J2EE and Web Cache, host - PerlApp.mysite.ru, ORACLE_HOME = /d01/oracle/prd/app_server_101202
they both are in the farm INFRA.mysite.RU, Repository Type - Database
There is a Perl application on a 2-nd server, it should be working thru SSO thru any free port (https). I defined 4445 for it. It's supposed that reference https://PerlApp.mysite.ru:4445 will be redirected to SSO. (On a 4445 for ssl it is faking certificate Oracle for testing purposes, but it doesnt bother me cause I need just to check if it redirects to SSO server, and next step I make certificate real).
What I did: I registered partner app on 1 server as per doc:
$ORACLE_HOME/sso/bin/ssoreg.sh -oracle_home_path /d01/oracle/prd/imapp -site_name PerlApp.mysite.ru:4445 -config_mod_osso TRUE -mod_osso_url https://PerlApp.mysite.ru:4445 -remote_midtier -config_file /d01/oracle/prd/imapp/Apache/Apache/conf/osso/osso4445.conf
Then I transfer appeared file osso4445.conf from 1 to 2 server thru FTP in /d01/oracle/prd/app_server_101202/Apache/Apache/conf/osso/
I changed /d01/oracle/prd/app_server_101202/Apache/Apache/conf/mod_osso.conf on 2 server a bit, so that it referenced new config file osso4445.conf
It looks like:
LoadModule osso_module libexec/mod_osso.so
<IfModule mod_osso.c>
OssoIpCheck off
OssoIdleTimeout off
OssoConfigFile /d01/oracle/prd/app_server_101202/Apache/Apache/conf/osso/osso4445.conf
# Insert Protected Resources: (see Notes below for how to protect resources)
# Notes
# 1. Here's what you need to add to protect a resource,
# e.g. <ApacheServerRoot>/htdocs/private:
# <Location /private>
# require valid-user
# AuthType Basic
# </Location>
</IfModule>
At the end I restarted HTTP-server thru OEM console and checked:
when I go to https://PerlApp.mysite.ru:4445 there is no any SSO redirect, it is just a certified page for App Server. What have I done wriong?Oracle AS 10.1.2 doesn't support J2EE 1.4 in general. You might be lucky with your tests on the other 10.1.2.x versions. For J2EE 1.4 applications you should consider AS 10.1.3.x.
--olaf -
"SSO" for non-sap web application using SAPGUI to browse?
I have a web application (non SAP) and the user base are also SAP users in an ABAP system.
To strengthen the authentication in the web app, I wanted to implement SSO
authentication as we pity the users for having to remember so many strong pw's and I
dont like LDAP based pw sync or other technology I dont understand, because then we are
just yet another application with the same pw...
We are having technical problems implementing SSO on the web app side, and are anyway a
bit sceptical about the user admin / role admin assignment if we get it to work.
So I have created a transaction in SAP which browses the web app and the intention is to
send the SAP sy-uname as the web app user. We can control this using s_tcode, and
an own auth object on the WAS side and a check on the session type before the connection is
established. In this sense we are dependent on the SAP concept implemented, but even so:
The role assignment is controlled in the web app itself -> so assume that I am not overly
worried about unauthorized access to the web application, as they would not have any
system role for it as their sy-uname does not exist. (Infact we can monitor this)
The browser on the front end is the SAPGUI with html controls on the SAP side.
I would be interested in knowing whether anyone else has experience with this approach, and
whether there are any areas to be carefull of?
I would also like to know whether this is a strategic error?
Kind regards,
JuliusHi Julius,
well, if that web application would run on the same ABAP backend system then the solution described in <a href="http://service.sap.com/~iron/fm/011000358700000431401997E/0612670">SAP Note 612670</a> would be applicable:
a so-called "Re-entrance ticket" (based on the "SAP logon ticket" SSO proceedings) is issued, transported via the SAPGUI connection and back to the system via the invoked HTML control.
But for non-SAP web applications that does not help.
In that case only X.509 client certificates can be used for SSO. Actually, the web application could then also be invoked directly (independent from the SAPGUI session). The user is authenticated based on the X.509 client certificate - and not based on the ABAP userID (of the SAPGUI session).
Well, if you don't mind the effort you could also use the "SAP Logon Ticket evaluation library" (sapssoext, see <a href="http://service.sap.com/~iron/fm/011000358700000431401997E/0304450">SAP Note 304450</a>) to evalute the SAP logon ticket externally. You'll then need to have a "stub application" at the ABAP side that triggers the http redirect to your external web application. Not a nice solution but a possible one.
In the future SAML browser artifacts would be an option (preferable to integrate non-SAP applications). But currently that's not available (for NWAS ABAP).
Cheers, Wolfgang -
SSO not working for a custom WDA application that runs in the Portal
I have a Portal system (Java stack, NW04s) that has an iView of type webDynpro ABAP. The custom Web Dynpro ABAP application resides on another system (ABAP stack, running ECC6). We have configured the trust relationship between the Portal and the ECC system as per
http://help.sap.com/saphelp_nw04s/helpdata/en/61/42897de269cf44b35f9395978cc9cb/content.htm
We know this is working since we are able to run ESS. However, for the custom WebDynpro ABAP application, when calling it for the first time, a logon screen shows up. How can we get rid of it? what are we missing to have SSO work for the custom WebDynpro application?Please check this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d35bb690-0201-0010-988a-d669c8530518
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2fhelp%2fsdn_help_nw04s%2fsaphelp_nw04s%2fhelpdata%2fen%2f5e%2f6c85c3edf942f39349a1e337434d29%2fcontent.htm
Hope it helps.
Regards,
Mona -
Problem with Configuring Tomcat for running jsp web applications..Plz HELP
I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
Copyright 2004 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
Copyright 2004 The Apache Software Foundation
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN">
<!-- Comment these entries out to disable JMX MBeans support used for the
administration web application -->
<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />
<!-- Global JNDI resources -->
<GlobalNamingResources>
<!-- Test entry for demonstration purposes -->
<Environment name="simpleValue" type="java.lang.Integer" value="30"/>
<!-- Editable user database that can also be used by
UserDatabaseRealm to authenticate users -->
<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Catalina">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 5 documentation bundle for more detailed
instructions):
* If your JDK version 1.3 or prior, download and install JSSE 1.0.2 or
later, and put the JAR files into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />
<!-- Note : To disable connection timeouts, set connectionTimeout value
to 0 -->
<!-- Note : To use gzip compression you could set the following properties :
compression="on"
compressionMinSize="2048"
noCompressionUserAgents="gozilla, traviata"
compressableMimeType="text/html,text/xml"
-->
<!-- Define a SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector port="8443"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" disableUploadTimeout="true"
acceptCount="100" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" />
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />
<!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector port="8082"
maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" acceptCount="100" connectionTimeout="20000"
proxyPort="80" disableUploadTimeout="true" />
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- You should set jvmRoute to support load-balancing via AJP ie :
<Engine name="Standalone" defaultHost="localhost" jvmRoute="jvm1">
-->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Catalina" defaultHost="localhost">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.4
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Because this Realm is here, an instance will be shared globally -->
<!-- This Realm uses the UserDatabase configured in the global JNDI
resources under the key "UserDatabase". Any edits
that are performed against this UserDatabase are immediately
available for use by the Realm. -->
<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>
<!-- Comment out the old realm but leave here for now in case we
need to go back quickly -->
<!--
<Realm className="org.apache.catalina.realm.MemoryRealm" />
-->
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority"
connectionName="test" connectionPassword="test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
connectionName="scott" connectionPassword="tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host
Note: XML Schema validation will not work with Xerces 2.2.
-->
<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">
<!-- Defines a cluster for this node,
By defining this element, means that every manager will be changed.
So when running a cluster, only make sure that you have webapps in there
that need to be clustered and remove the other ones.
A cluster has the following parameters:
className = the fully qualified name of the cluster class
name = a descriptive name for your cluster, can be anything
mcastAddr = the multicast address, has to be the same for all the nodes
mcastPort = the multicast port, has to be the same for all the nodes
mcastBindAddr = bind the multicast socket to a specific address
mcastTTL = the multicast TTL if you want to limit your broadcast
mcastSoTimeout = the multicast readtimeout
mcastFrequency = the number of milliseconds in between sending a "I'm alive" heartbeat
mcastDropTime = the number a milliseconds before a node is considered "dead" if no heartbeat is received
tcpThreadCount = the number of threads to handle incoming replication requests, optimal would be the same amount of threads as nodes
tcpListenAddress = the listen address (bind address) for TCP cluster request on this host,
in case of multiple ethernet cards.
auto means that address becomes
InetAddress.getLocalHost().getHostAddress()
tcpListenPort = the tcp listen port
tcpSelectorTimeout = the timeout (ms) for the Selector.select() method in case the OS
has a wakup bug in java.nio. Set to 0 for no timeout
printToScreen = true means that managers will also print to std.out
expireSessionsOnShutdown = true means that
useDirtyFlag = true means that we only replicate a session after setAttribute,removeAttribute has been called.
false means to replicate the session after each request.
false means that replication would work for the following piece of code: (only for SimpleTcpReplicationManager)
<%
HashMap map = (HashMap)session.getAttribute("map");
map.put("key","value");
%>
replicationMode = can be either 'pooled', 'synchronous' or 'asynchronous'.
* Pooled means that the replication happens using several sockets in a synchronous way. Ie, the data gets replicated, then the request return. This is the same as the 'synchronous' setting except it uses a pool of sockets, hence it is multithreaded. This is the fastest and safest configuration. To use this, also increase the nr of tcp threads that you have dealing with replication.
* Synchronous means that the thread that executes the request, is also the
thread the replicates the data to the other nodes, and will not return until all
nodes have received the information.
* Asynchronous means that there is a specific 'sender' thread for each cluster node,
so the request thread will queue the replication request into a "smart" queue,
and then return to the client.
The "smart" queue is a queue where when a session is added to the queue, and the same session
already exists in the queue from a previous request, that session will be replaced
in the queue instead of replicating two requests. This almost never happens, unless there is a
large network delay.
-->
<!--
When configuring for clustering, you also add in a valve to catch all the requests
coming in, at the end of the request, the session may or may not be replicated.
A session is replicated if and only if all the conditions are met:
1. useDirtyFlag is true or setAttribute or removeAttribute has been called AND
2. a session exists (has been created)
3. the request is not trapped by the "filter" attribute
The filter attribute is to filter out requests that could not modify the session,
hence we don't replicate the session after the end of this request.
The filter is negative, ie, anything you put in the filter, you mean to filter out,
ie, no replication will be done on requests that match one of the filters.
The filter attribute is delimited by ;, so you can't escape out ; even if you wanted to.
filter=".*\.gif;.*\.js;" means that we will not replicate the session after requests with the URI
ending with .gif and .js are intercepted.
The deployer element can be used to deploy apps cluster wide.
Currently the deployment only deploys/undeploys to working members in the cluster
so no WARs are copied upons startup of a broken node.
The deployer watches a directory (watchDir) for WAR files when watchEnabled="true"
When a new war file is added the war gets deployed to the local instance,
and then deployed to the other instances in the cluster.
When a war file is deleted from the watchDir the war is undeployed locally
and cluster wide
-->
<!--
<Cluster className="org.apache.catalina.cluster.tcp.SimpleTcpCluster"
managerClassName="org.apache.catalina.cluster.session.DeltaManager"
expireSessionsOnShutdown="false"
useDirtyFlag="true"
notifyListenersOnReplication="true">
<Membership
className="org.apache.catalina.cluster.mcast.McastService"
mcastAddr="228.0.0.4"
mcastPort="45564"
mcastFrequency="500"
mcastDropTime="3000"/>
<Receiver
className="org.apache.catalina.cluster.tcp.ReplicationListener"
tcpListenAddress="auto"
tcpListenPort="4001"
tcpSelectorTimeout="100"
tcpThreadCount="6"/>
<Sender
className="org.apache.catalina.cluster.tcp.ReplicationTransmitter"
replicationMode="pooled"
ackTimeout="15000"/>
<Valve className="org.apache.catalina.cluster.tcp.ReplicationValve"
filter=".*\.gif;.*\.js;.*\.jpg;.*\.htm;.*\.html;.*\.txt;"/>
<Deployer className="org.apache.catalina.cluster.deploy.FarmWarDeployer"
tempDir="/tmp/war-temp/"
deployDir="/tmp/war-deploy/"
watchDir="/tmp/war-listen/"
watchEnabled="false"/>
</Cluster>
-->
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn" />
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<!--
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
This access log implementation is optimized for maximum performance,
but is hardcoded to support only the "common" and "combined" patterns.
-->
<!--
<Valve className="org.apache.catalina.valves.FastCommonAccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common" resolveHosts="false"/>
-->
<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine? -
T-code for delete file from application server
Hi all!
Please, has any t-code for delete file from application server? For upload exist CG3Z, for download has CG3Y. And for delete? Has anyone?
I need to delete file from application server in QA system and i don't want to create a program for this because i will need to transport a request from DEV to QA.I don't have contact with basis team.
The FM EPS_DELETE_FILE support directory name with max 60 char. My dir. has more than that. I need a transaction for this.
Anybody know if this transaction exist? -
How to create different log files for each of web applications deployed in OC4J
Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi. -
How To get the number of request's for a single Composite Application
Hi can any body tell how to get the number requst's for a single composite application.
Thanks
ManiHi,
There are lots of STATE is available for composite instances, like mentioned in the below query. I hope you will get answer from the below query.
SELECT (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END) AS STATE, component_name, COUNT(*) AS NUM_OF_CUBE_INST FROM CUBE_INSTANCE where composite_name='PASS THE COMPOSITE NAME HERE..........'
group by (CASE WHEN STATE=1 THEN 'OPEN AND RUNNING'
WHEN STATE=2 THEN 'OPEN AND SUSPENDED'
WHEN STATE=3 THEN 'OPEN AND FAULTED'
WHEN STATE=4 THEN 'CLOSED AND PENDING'
WHEN STATE=5 THEN 'CLOSED AND COMPLETED'
WHEN STATE=6 THEN 'CLOSED AND FAULTED'
WHEN STATE=7 THEN 'CLOSED AND CANCELLED'
WHEN STATE=8 THEN 'CLOSED AND ABORTED'
WHEN STATE=9 THEN 'CLOSED AND STALE'
WHEN STATE=10 THEN 'NON-RECOVERABLE'
ELSE STATE || ''
END), component_name;
Thanks,
Vijay -
Looking for a simple drawing application for my grand-daughters
Well, that's more or less it, I'm looking for a simple drawing application for my grand-daughters. In the children section of iTunes store, there's only a few books and nothing more. I bought the iPad mainly for my grand-children to teach them a bit and I don't find interesting things for them.
Can anybody help me with that?
Pedro Godfroid GoffinBrushes is a nice finger drawing app. Since you didn't say how old they are, I don't know if the interface is to difficult for them to use.
Sketchbook is another nice drawing app.
Neither are free.
Glor -
Just moved our ASP 2.0 based web application to a Windows 2012 Standard Cloud Server. A directory is used for temporary copying of files for the application. The Read Write access is properly given and everything works but then stops working
in about 2.5 hours. The settings are still there, to make things work again typically I add "Everyone" to the security list and apply and then 3 hours later I remove "Everyone" and this refreshes the security setting and things work
againg for a couple of hours. Last Cloud server was 2008 R2 and we had no issues. Recently moved to this new cloud server. Code has been functioning fine for years and can not migrate it to newer ASP since will have to make quite a few code
changes. Obviously a bug which needs to be addressed. Again the security settings do not disappear but are no longer handled properly every 3 hours or so.Hi,
Is there any other files have the same issue? Please create a test folder and give the same permissions with the directory for ASP 2.0 application to see if the issue still exists.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
I recently found my phone outside in light rain (it had been there about 20 minutes). It had some glitches at first, however after letting it rest overnight it seemed to mostly recover. The one problem I am having is that I no longer have sound for any of my applications. I do have sound for phone fuctions, and I am able to use the speaker for phone functions.
When I am in my applications, including music/videos, the only way I can hear is if I use my earbuds. I am able to make a video and it will record sound just fine.
When I go to the multitask screen, the volume bar is empty and I cannot adjust it using the side buttons (even though in settings I have that feature activated). I completely reset all of my settings tonight and that did not make a difference.
Is there a setting I am missing, or am I just SOL? I am trying to avoid having to get a whole new phone but it is very frustrating to not have sound with my applications.Hi Baileyfour,
Welcome to the Support Communities!
The articles below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
There are two places where vibrations can be set.
One is the Settings > Sounds
The other area is Settings > Notifications
If you have an app set to Alert, it may have a vibration set for it.
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Information about Notifications settings can also be found in the iPhone User Guide (pages 131, 132)
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
I hope this information helps ....
Have a great day!
- Judy -
Problem to use RF front-end for 13.56 MHz application
Hi,
I developed an ASK transceiver using 5640R. It worked well when I directly connected the AI and AO ports. Then I tried communications between two antennas. I cascaded the niTuner VI and RF Upconverter Only Mode VI to control the PXI-5600 and PXI-5610 as separate modules. I connected the two antennas to 5600 RF downconverter input and 5610 RF upconverter output respectively. But when I ran it, all I received was noise. I checked the upconverter Only Mode Vi, and I found out that the 13.56 MHz RF frequency might be a problem. The error would occur that the IF carrier frequency is an invalid value. And the smallest value for IF should be 14 MHz. So it seems that for 13.56 MHz, I cannot set an IF to satisfy the minimum IF value requirement.
I think I should be able to use this box for 13.56 MHz applications. So does anyone know the solution for this problem?
Thanks for help!
DanluHi Danlu,
The PXI-5610 can only tune in 1 and 5 MHz step sizes based on bandwidth. For BWs larger than 10 MHz, the 5610 will tune in 1 MHz steps, and for BWs smaller than 10 MHz the 5610 will tune in 5 MHz steps. Thus, a center frequency of 13.56 MHz will not be immediately possible with th 5610 since it is not divisible by 1 or 5 MHz.
To compensate for this, I would suggest that you tune to 15 MHz (if you are selecting a narrow) or 13 MHz (if you are selecting a wide bandwidth). For the remaining frequeny offset, you can adjust the NCO of the 5640R.
For example » tune the 5610 to 15 MHz, and tune the NCO 25 MHz - 1.54 MHz = 23.56 MHz. This will place you at the correct center frequency when combining the two devices. This is how we perform fine tuning with respect tof frequency for our PXI-5661 and PXI-567x products.
Regards,
Chris Behnke
Sr. RF Engineer
High Frequency Measurements -
A wallet needs to be configured for this instance of Application Express
hi
I m very new to APEX. I could create web service client with wsdl. But when service is on https i get message
"a wallet needs to be configured for this instance of Application Express".
I have created wallet using OWM (10.2.0.1.0) at location c:\del_sometime
Using admin i configured APEX instance settings wallet as
Wallet Path = file:c:\del_sometime
And checked in database too
SQL> ALTER SESSION SET CURRENT_SCHEMA = APEX_030200;
Session altered.
SQL> SELECT
2 APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
3 from dual;
APEX_INSTANCE_ADMIN.GET_PARAMETER('WALLET_PATH')
file:c:\del_sometime
Any idea whats wrong? I am following steps from http://download.oracle.com/docs/cd/E14373_01/admin.32/e13371/adm_wrkspc.htm#BABFBJEAalso whe I try following i keep getting error failure to open file. I am on XP and file is present with proper permissions.
SQL> SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual;
SELECT utl_http.request('https://support.oracle.com/',null,'file:c:\del_sometime\') from dual
ERROR at line 1:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1577
ORA-28759: failure to open file
ORA-06512: at line 1
Maybe you are looking for
-
New To AE from Motion (FCP) - timeline and other questions (PREVIEW)
Okay, so like your normal person, I just install and open a template and delve into it seeing what can happen. So far, I learned that you need an update for macbook pro (opengl), no problem, downloaded and all is fine. However, I did notice something
-
How do I convert a pdf file into a word file??
how can I subscribe to the adobe/ exportpdf program
-
Cant get Motocast to show music on phone?
I downloaded the Motocast on PC and the phone picked up on my documents which have pics and the picture file plus videos. I then decided to download a music site onto PC called Imesh and it lets me download songs onto PC but now when I get on phone i
-
Two unexpected Locals variables when iterating over array of containers.
Hi, I iterate over an array of containers. In the ForEach loop step variables format I have defined two variables; one is current offset, second one is current element. The loop works fine. However, during the debug process, I've spotted two new Loca
-
How to config ODBC when install the biapps in Linux
The dac need ODBC connection to set the datawarehouse tables. And the informatic also need to config the ODBC connection to do ETL from sieble sql server database. Is it possible to config the ODBC in the linux env?