Deploying crystal reports basic for visual studio 2008 for VB6

My application has a module in .net and other in vb6.
I have a problem on deploying crystal reports in client machines, for module in vb6.
The vb6 application uses crystal viewer control obtained from crystal reports basic for visual studio 2008.
What type of deployment should I use?
Currently, I have a setup with prerequisite "crystal reports basic for visual studio 2008".
But I think it misses the dlls crviewer.dll and craxddrt.dll, so I put them in setup and with the register COM options, and it works, but it's not working very well.
When I open a form that uses crystal viewer, the setup (I have created) is lunched and says that have to restart machine. Then it opens the report, but the next time I use the application it does the same thing.

Ok, thank's for the posts, they help so much.
So I'm going to discard vb6 and move to .NET, but... there is a problem:
Many reports have parameters that are asked before showing the report.
The Crystal Viewer that is used in VB6 version isn't the same used in .NET.
The viewer of VB6 asks the parameters in the way we want, however the .NET crystal viewer ask's the parameters in way that we don't like, because we have to do next -> next -> next...
The links above show the diferences:
VB6 -> http://picasaweb.google.com.br/paulo.gonc/CrystalReports#5249249283702618322
.NET -> http://picasaweb.google.com.br/paulo.gonc/CrystalReports#5249246459437178242
There is a way to configure Crystal Viewer, so that parameters asking form will work like the vb6 away?

Similar Messages

Crystal Report 10 in Visual Studio 2008

Hello,
Is there a formal process to make Visual Studio 2008 work with Crystal Report version 10? Are there specific files that need to be installed? Any problems to watch for. I currently tried to port Visual Studio 2003 solution that had working Crystal Reports 10 code and I have received some errors relating to ReportDocument (but there could be other). Anyway, maybe there are some basics I am missing.
Thanks.

When I double click on the report (.rpt) file, I am getting Microsoft Windows dialog with the following message:
      Microsoft Visual Studio 2008 has stopped working.
      Windows can try to restart the program.
      --> Restart the program
     --> Debug the Program
When I click Debug the Program, I see following:
   Unhandled exception at 0x18205950 in devenv.exe: 0xC0000005: Access violation.
   Top 3 Call Stack lines at this point are:
   18205950()
   CRDesigner.dll!3e043d7a()
   [Frames below may be incorrect and/or missing, no symbols loaded for CRDesigner.dll]
   When I click Break in debug window I see:
   No symbols are loaded for any call stack frame. The source code cannot be displayed."
   Windows has triggered a breakpoint in devenv.exe.
   This may be due to a corruption of the heap, which indicates a bug in devenv.exe or any of the DLLs it has loaded.
I do not see Crystal Reports 10.xx under reference list. How do I go back to the version of reports originally created in? If I am not able to work the Crystal Reports 2008, I want to go back to 10.xx and drop the idea of considering upgrade to Crystal Reports 2008.
Any help is appreciated. Thanks.

Crystal Reports 10 and Visual Studio 2008

Hi All
I've got an application that I recieved from my cleint. This is running Visual Studio 2008 and Crystal Reports 10 backend being Oracle 10.2
However, when I try to run the applincation and open any report it pops up an error "crdb_oracle.dll" not found.
I have searched this on the internet and found that there were many suggestions there. I've tried all the suggestions like reinstalling the Oracle client, Re Installing Crystal etc.,
But the error remained as is.
When i try to do a regsvr32 on this dll it fails. Am really not sure why this is happening
Any help from any one out there is highly appreciated.
Pavan
UPDATE:
I've verified the versions though. They are workign fine at the customer place.
Here is what they have done.They have got Oracle, VS 2008 and Crystal Reports 10. They got the reports embedded into .NET environment and are able to view the reports.
But when we try to execute the same code, it pops up the error, "Crdb_oracle.dll" could not be loaded.
Wanted some support on this.
Additionally, could you suggest on what needs to be done? Do we need to upgrade crystsal to crystal 2008? Will this work without any errors on the execution side (I'm sure that the customer of mine will not be happy or willing to upgrade but atleast if I get a confiramtion from you I can atleast quote this to the customer) and without any extra redesiging of the reports or any other work on the reports
Pavan Kumar
Edited by: pavan kumar on Jul 30, 2008 4:01 PM

Hi, Pavan;
Likely the problem is that the report was created with a different version of Crystal Reports than the one that ships with VS.NET 2008 (Which is Crystal Reports Basic for VS.NET 2008 - version 10.5). If the report was created with a full version of Crystal Reports, then it would have access to our native Oracle driver, the dll that is giving you the issue.
The full version of Crystal Reports would install that dll, but the .NET version would not. In order to distribute that DLL, yes, the client would need to develop with the full version of Crystal Reports, in this case Crystal Reports 2008.
Regards,
Jonathan

Crystal Reports Bundeled With Visual Studio 2008

We are currently using the version of Crystal Reports that comes with Visual Studio 2008. Many reports have 5-10 sub reports.
We are running a ASP.NET application and this application passes to the reports a XSD File as the data source. It can take up to 5 minutes sometimes for a report to process.
A couple of questions.
1. Is there a concurrent user limit (I have read 3 or 5)
2. Do the reports get queued up if more than 3 users are running a report?
3. If we have sub reports does each report count as a "user" for example if we have one user on the machine and they run the report that has 10 sub reports, would that be hitting a user limit?
3. Would upgrading to the 2008 version help us at all?
Any other recommendations?
Thank in advance!

1. Is there a concurrent user limit (I have read 3 or 5)
concurrent user limit is 3
2. Do the reports get queued up if more than 3 users are running a report?
+ Yes. If you go to the Event viewer, you should be bale to see messages along the lines of; license not found, waiting x seconds+
3. If we have sub reports does each report count as a "user" for example if we have one user on the machine and they run the report that has 10 sub reports, would that be hitting a user limit?
+ There are two distinct counts. Users, and print jobs. The print engine, can process 3 concurrent users. A print job, consists not only of the report, but also it's subreports. A page through is a print job. A search through the report is a print job. Print job limit is set in the registry and by default it is set to 70. The upshot of this is; if you have one report and one subreport in the detail section and the detail section has 100 records, you will run 1001 print jobs.
4. Would upgrading to the 2008 version help us at all?
Probably not. The same structure exists in CR 2008. Now, you say that you pass an XSD file to the report. Are you actually passing and XSD or a Dataset?_
Finally, remember that if you have 10 subreport in a report, you are running 11 print jobs right there. If one or more of those subreports are in the detail section, the number of print jobs increases accordingly.
For more information see the article [Crystal Reports Maximum Report Processing Jobs Limit v2.doc|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Edited by: Ludek Uher on Dec 16, 2009 10:06 AM

Using Crystal Reports XI with Visual studio 2008 C#

Hi,
I am trying to add some reports which have been created to a C# web application using the Crystal Reports web viewer in Visual Studio 2008. The reports use SQL authentication instead of integrated authentication.
Everytime the page with the report viewer is loaded, im prompted for my logon details. I dont want the end users to be doing this. How do i integrate the logon details into my application so that it doesnt keep prompting using C#?? Also i have parameters which produce a drop down box of available values...this does not work within the web application but does in Crystal Reports.
Any help would be good with examples in C# please. Ideally i would like to hold the connection info in the web.config however i dont know if this is possible.
Thanks
Vish

Hi Vishal,
Here's a link to the platforms for SP5:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/907e6412-a7ac-2b10-23a8-f837fcc78a37
If the link doesn't work then go to this one: Articles
And select the the CR version and look for the specific patch level. If you don't have patches installed I would suggest downloading and installing to get up to SP5.
It does not indicate .NET 2008 so it's not been tested, it may work but if you run into any issues we don't have an escalation path to get it fixed.
Thank you
Don

Crystal Reports Viewer Control - Visual Studio 2008 WEB Application

My question is this: Has ANYONE on this planet been able to get the ASP .NET CR Viewer control to actually work?
Why does this editor NOT recognize End-of-line or CR characters or any whitespace??
I have developed a Crystal Reports "Viewer" web application in VS2008 using C#.
It's a simple app, in that it's a single page with a treeview control (containing the grouped names of the reports to which the user has access) and the CR Viewer control.
The report files live on a network share, and permissions to them is controlled via a SQL Server database, which, for each report, stores the UserID and Logion for the oracle database, as well as any required parameter values.
The reports themselves are all hititng an Oracle 10g database.
I managed to do this in a Windows desktop applcation using Visual Studio 2005 and VB .net, but now, upon trying to make this a web application in VS2008, I have completely failed. The application works when run locally, but when deployed to the web server, I experience database login prompts when I should not, (the dreaded "Report requires further information" message) even thought the setdatabaselogin has already been set. I have tried saving the reportdocument in viewstate and re-assigning the viewer Datasource property to it, that also fails. However, it only does it on some reports, and not others. (admittedly, the reports may have been created using different CR versions)
The viewer also displays data it should not be displaying when I attempt to scroll, when I do manage to get a report to run.
I am setting parameters dynamically at run time, whose values are stored in the SQL database.
Code Sample:
protected void ShowReport(int ReportID)
 SQLDataPortal2005.Common sql = new SQLDataPortal2005.Common();
 Hashtable outParms = new Hashtable();
 string sAccess;
 IDataReader dr;
 CrystalDecisions.CrystalReports.Engine.ReportDocument rptDocument = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
 System.Security.Principal.WindowsPrincipal p = System.Threading.Thread.CurrentPrincipal as System.Security.Principal.WindowsPrincipal;
 sAccess = p.Identity.Name;
 int j = 0;
 int i = -1;
 if (!IsAdmin())
 sql.ExecNonQuery("CrystalReports", outParms, "proc_CRM_Check_Permissions", sAccess, Convert.ToInt32(TreeView1.SelectedNode.Value));
 if (outParms["@Allow"].ToString() != "True")
 Response.Redirect("ErrorPage.aspx"); // redirect to error page
 string sPath = System.Configuration.ConfigurationManager.AppSettings["WareHouse"].ToString();
 sPath = sPath + TreeView1.SelectedNode.Text.Trim() + ".rpt";
 rptDocument.Load(sPath);
 dr = sql.GetDataReader("CrystalReports", "proc_CRM_Get_Report", Convert.ToInt32(TreeView1.SelectedNode.Value));
 while (dr.Read() == true)
 j += 1;
 if (j < 2)
 rptDocument.SetDatabaseLogon(dr["DB_Login"].ToString(), dr["DB_Pwd"].ToString(), "PLAW", "LAWDB", true);
 pList = dr["ParmList"].ToString().Split(',');
 dr.Close();
 dr.Dispose();
 if (pList.Length > 0 && pList[0].ToString().Trim() != "")
 foreach (CrystalDecisions.Shared.ParameterField x in rptDocument.ParameterFields)
 i++;
 switch (x.ParameterValueType)
 case CrystalDecisions.Shared.ParameterValueKind.BooleanParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToBoolean(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.CurrencyParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToDouble(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.DateParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToDateTime(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.DateTimeParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToDateTime(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.NumberParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToInt32(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.StringParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToString(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.TimeParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToDateTime(pList));
 break;
 Session["CReport"] = rptDocument;
 CRV1.ReportSource = rptDocument;
 CRV1.DisplayGroupTree = false;
 CRV1.HasRefreshButton = true;
 CRV1.ShowFirstPage();
Is there a better/different way of accomplishing this very simply process? All I need this application to do is to view a report, while setting it's parmeters (if required) dynamically at run time. I don't EVER want the user to be prompted for DB LOGIN INFO.
Edited by: RichardK on May 10, 2010 4:14 PM
Edited by: RichardK on May 10, 2010 4:14 PM
Edited by: RichardK on May 10, 2010 4:16 PM
Edited by: RichardK on May 10, 2010 4:18 PM
Edited by: RichardK on May 10, 2010 4:22 PM
Edited by: RichardK on May 10, 2010 4:23 PM

To answer you question; Yes, I suspect that most of the users in this community have managed to successfully create web apps. And this is the tiniest of sampling of the developers out there...
A few suggestions;
1) Keep the posts to under 1200 characters. Otherwise, the formatting is lost which makes it difficult to read.
2) Try out a few sample apps from here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Suggest; csharp_web_simplelogonengine.zip, csharp_web_simplelogonviewer.zip and csharp_web_subreport_logon.zip.
3) Start simple; one table, one field, no subreports. Hard code the database logon parameters. Convince your self that this does work. Increase the complexity - add fields, tables, subreports. Do not mix connection methods (e.g.; if ODBC for main, than ODBC for sub is a good idea, though not a requirement).
4) See the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de].
5) See [this|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/d05b3bb7-0f28-2c10-4ea3-84dbdc4e414e?quicklink=index&overridelayout=true] article.
6) Consider creating a phone case here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup

Using Crystal Reports for Visual Studio 2008 in C++/CLI

How can I use Crystal Reports for Visual Studio 2008 for creating WinForm Application written in C++/CLI under VS2008 ?

Can you repost your last response in English?
Also, check out this post
Read Before Posting - Where to find Crystal Reports .NET SDK resources
It has links to our Crystal Reports resources for .NET.
Edited by: Jason Everly on Apr 22, 2009 9:07 AM

Deploying Crystal Reports Basic for Visual Studio 2008

I have Windows Forms project using Crystal Reports Basic for Visual Studio 2008
I can't find the merge module to include in the setup project like I used to do in Visual Studio .NET 2003
Everyone seems to say that they don't exist for that version of Crystal Reports
After searching for a long time I found something about a package located at
C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x86.msi
Tried it and it seems to work.
Do I have to install this to the client computer ? Is that the only way having a "Crystal Reports Basic Runtime for Visual Studio 2008" in the program list of the client computer ?

Hi Victor,
We can download all the runtimes from the following link:
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm]
Try to search Business Objects Note regarding this from [here|https://www.sdn.sap.com/irj/sdn/businessobjects-notes]
More info regarding deployment can be found from DevLibrary:
[https://boc.sdn.sap.com/node/8546]
Regards,
Shweta

An error in Crystal Reports Basic for Visual Studio 2008

Greetings from Peru,
We have a problem with one of the Crystal Reports products weu2019d like you to help us with. We work with Crystal Reports Basic for Visual Studio 2008.
The error weu2019ve detected is in one of our systemu2019s reports; this report shows data inside frames. When the content to show is larger (in height) than the space left in the page, the container object of the report makes a line break keeping the title and the frame empty at the end of that page, but the information is shown in the next page. What we need is that not empty frame is displayed.
Weu2019ve tried to solve this problem by adjusting the report in different ways (by programming coding), but unfortunately this problem is related to how much data is displayed, because if this data fit in the space left in the page, the line break would not occurs and the data is shown at the end of the same page.
We hope you can help us with this issue. I look forward to your comments.

All I can think of is trying CR 2008 (v.12.x). You can obtain an eval copy from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Keycode missing in Crystal Reports Basic for Visual Studio 2008

I just upgraded from Visual Studio 2005 Professional to Visual Studio 2008 Professional (with SP1 installed also). Crystal Reports Basic for Visual Studio 2008 is listed as installed under the VS Help dialog, but no key code is shown. And when I attempt to open a Crystal Report, I get a dialog saying 'Please wait while Windows configures Crystal Reports Basic', which eventually terminates with an 'Invalid Keycode' message.
I've tried repairing the Visual Studio install, and even uninstalling and reinstalling the whole thing. To no avail.
Other facts: My VS 2005 version still works with its version of Crystal Reports. I am running Vista Professional. Looking in the registry, under HKEY_LOCAL_MACHINE | SOFTWARE | Crystal Decisions | Crystal Reports | VSNET | Keycodes | CR9 NET, I see a Type REG_SZ with a data value in the form xxxxxx-xxxxxxx-xxxxxxxxxxxxxxxxxxxxxxxxxx [6 chars-7 chars-26 chars].
Help! How do I get Crystal Reports Basic for Visual Studio 2008 to work?

Hi Elaine,
Thanks for your response. I do have versions of Visual Studio 2003 and Visual Studio 2005 on my machine, and the earlier versions of Crystal Reports worked with these versions. In addition to the registry key I cited earlier (which I now understand is a VS 2003 version), there is an entry under HKEY_LOCAL_MACHINE | SOFTWARE | Crystal Decisions | Crystal Reports | 10.2 | Crystal Reports | KeyCodes | CR Ent. I see that you are correct, and this corresponds to my VS 2005 installation (which still works). However, there is NO entry under HKEY_LOCAL_MACHINE | SOFTWARE | Crystal Decisions | Crystal Reports | 10.5 (the CR Basic for Visual Studio 2008 path you indicated). There is an entry under HKEY_LOCAL_MACHINE | SOFTWARE | Business Objects | 10.5 | Crystal Reports, but it has only keys for ChartSupportPath, CommonFiles, DisablecheckForUpdates, and Path.
The Windows\assembly folder has 25 files that are CrystalDecisions.xxx, version 10.5.3700.0. This is consistent with my seeing 'Crystal Reports' listed as installed in VS 2008 Help. But no KeyCode!
I tried a complete uninstall and reinstall of VS 2008, without luck. I can't clean my system of earlier verions of Crystal Reports, because I am still supporting a body of work that I did under VS 2005, and I can't convert all this stuff to 2008 -- at least until I have a fully working VS 2008 suite. After this experience, I fear that if I were to uninstall an earlier version, i might never get it back!
I've spend quite a few hours on this with no luck, so any help would be enormously appreciated.

Looping login screen in Crystal Reports for Visual Studio 2008

Hello,
I am using Visual Studio 2008 with the Crystal Reports Basic for Visual Studio 2008. Visual Studio and the Crystal Reports Basic Runtime for Visual Studio 2008 (x64) are installed on both the development and production boxes. I am using Crystal Reports via Visual Studio and do not have the full blown version of Crystal Reports installed on my machine.
We have used Visual Studio to create an aspx webpage and would like to use Crystal Reports to display a graph. The report displays fine in debug mode, but displays a looping login screen when moved into production on the web server. The web server is using Windows Server 2008 (x64) with IIS 7. We have tried passing the logon parameters to the crystal report during the page init event with the auto-bind feature enabled on the crystal report viewer. A MySQL database provides the data for the report. All ODBC data sources have been configured the same on both machines.
Any help would be greatly appreciated! Thanks!

Hello,
Use a tool called ProcessMonitor from Microsoft and watch what happens when you try to log on.
Also can you verify you created your DSN using the 64 bit ODBC Admin and that you are using a System DSN so IIS can find it.
And that the MySQL ODBC drive is also 64 bit?
If you can read ODBC trace logs you could enable it also and see what error you are getting.
Thank you
Don

Crystal Reports for Visual Studio 2008 - dbf

Hello,
I use both Visual Studio 2005 and 2008 on same PC. I can not work with dbf files (format foxpro2x, dbase IV) in VS 2005 and VS 2008.
Q1. Work Crystal Reports for Visual Studio 2008 with database files - dbf (version foxpro2x, dbaseIV)? I get error -
Crystal Reports ActiveX Designer
Failed to load database information
or with dbf files work only Full version of Crystal Reports?
Q2. How re-install Crystal Reports for Visual Studio 2008. In setup Add/Remove features not exist Crystal Reports check box. I only Repair/reinstall all Visual Studio but after reinstall same error
Crystal Reports ActiveX Designer
Failed to load database information
3. When I can open sample project with Crystal Reports which use Crystal Reports (dbf file) this error is displayed:
Crystal Report Viever
Failed to load database information
Details: The database DLL "crdb_p2bxbse.dlll" could not be loaded.
4. I reinstal Crystal Report in Visual Studio 2005 - same error
5. I apply hotfix Crystal Reports for .NET 2005 - SP 1 - same error
Thank You
Ludek

Hi Ludek,
1-For dbase file to work you need have permission on database files for IIS as well as user accessing the database.
2-For re-install you need to insert the CD of visual studio setup then do custom install and then try to choose crystal reports for re-installing
3-The old viewer might cause the problem. In this case can you try connecting to a blank dbase file.
and for such issues we have a special forum [here|SAP Crystal Reports, version for Visual Studio;
Thanks,
Hitesh Mangtani

Crystal Reports for Visual Studio 2008

We are currently using Visual Studio 2005 w/Crystal Report 11.5. We have been unable to migrate to Visual Studio 2008 up until now because the only version of Crystal Reports that was supported for Visual Studio 2008 was version 10 I believe, and that version did not contain some of the features that we are using in version 11.5.
I see that there is now an upgrade available to integrate Crystal Reports 2008 with Visual Studio 2008. My question is will this version of Crystal Reports give us the same or more features that we are currently getting with Crystal Reports 11.5?

Hi Clint,
It is a newer version so you should only gain functionality and not lose any from XI R2.
Make sure you use Crystal Reports 2008 Service Pack 0 as it is the version that is supported with VS.NET 2008.
Jason

Crash call stack caused by crdb_adoplus.dll and crqe.dll on Crystal Report for Visual Studio 2008

Hi There,
i have an application running on C# .NET which use .NET Framework 3.5 SP1 and Crystal Report for Visual Studio 2008 x64. Now i'm facing the issue in application. suddenly my IIS crash , and the application is logout.
i have opened advisory case to Microsoft and they help me to analyze the dump from the application when the issue is happened.
here it is the stack trace :
STACK_TEXT:
00000000`9b1dd160 000007fe`eb93946d : 00000000`9b1dd308 000007fe`eb931948 00000000`00000000 000007fe`eb931610 : verifier!VerifierStopMessage+0x1f0
00000000`9b1dd210 000007fe`eb939736 : 00000000`9b1ddb50 00000000`00000002 00000000`00000040 00000000`00000004 : verifier!AVrfpDphReportCorruptedBlock+0x2a5
00000000`9b1dd2d0 000007fe`eb9399cd : 00000000`b32f1000 00000000`9b1ddb50 00000000`00000004 00000000`00001000 : verifier!AVrfpDphCheckNormalHeapBlock+0xce
00000000`9b1dd340 000007fe`eb93873a : 00000000`9b1ddb50 00000000`01001002 00000000`cca0c3b0 00000000`00000000 : verifier!AVrfpDphNormalHeapFree+0x29
00000000`9b1dd370 00000000`770b99a5 : 00000000`00000000 00000000`00000000 000007fe`f25514f7 000007ff`05f0a1d1 : verifier!AVrfDebugPageHeapFree+0xb6
00000000`9b1dd3d0 00000000`7705dbc0 : 00000000`b32f0000 00000000`cc16afb0 00000000`b32f0000 00000000`cc16afb0 : ntdll!RtlDebugFreeHeap+0x35
00000000`9b1dd430 00000000`7704413d : 00000000`b32f0000 00000000`9968aa01 00000000`00000000 00000000`9b1ddb50 : ntdll!RtlpFreeHeap+0x19a70
00000000`9b1dd770 00000000`76ef307a : 00000000`00000001 00000000`9968aa40 00000000`9b1dd958 00000000`cc16afb0 : ntdll!RtlFreeHeap+0x1a6
00000000`9b1dd7f0 00000000`9739cabc : 00000000`00000000 00000000`9968aa40 00000000`000002a3 00000000`cc13ef28 : kernel32!HeapFree+0xa
00000000`9b1dd820 000007fe`f2550e37 : 00000000`00000000 00000000`24b20fc0 00000000`0000001b 000007ff`0604a340 : msvcr90!free+0x1c
00000000`9b1dd850 000007ff`05f05802 : 00000000`00000000 000007ff`0604f7c0 00000000`9b1dd958 00000000`9968aa40 : mscorwks!DoNDirectCall__PatchGetThreadCall+0x7b
00000000`9b1dd8f0 000007ff`05f0a231 : 000007ff`0604f730 000007ff`05f05802 00000000`cc16afb0 00000000`0000001b : DomainBoundILStubClass.IL_STUB(Void*)+0x42
00000000`9b1dd9b0 000007ff`05f0a1d1 : 00000000`cc16afb0 00000000`000007d4 00000000`9b1dd2e8 00000000`00000000 : crdb_adoplus!<Module>.DbFieldInfo.{dtor}(DbFieldInfo*)+0x11
00000000`9b1dd9e0 000007ff`05f0a177 : 00000000`0000001c 00000000`cc13ef20 00000000`00000000 00000000`00000000 : crdb_adoplus!<Module>.DbFreeFieldList(UInt32, DbFieldInfo**)+0x31
00000000`9b1dda30 000007fe`f254f18a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : DomainBoundILStubClass.IL_STUB(Int32, Int64)+0x7
00000000`9b1dda60 00000000`9a506b36 : 00000000`0000001c 00000000`cc13ef20 00000000`00000000 00000000`00000000 : mscorwks!UMThunkStubAMD64+0x7a
00000000`9b1ddaf0 00000000`9a583538 : 00000000`bf35af90 00000000`bf9bcfa0 00000000`9b1ddd30 00000000`00000000 : crqe+0x16b36
00000000`9b1ddca0 00000000`9a6c1c64 : 00000000`bec28dc0 00000000`cd926e60 00000000`00000000 00000000`cbafcf20 : crqe+0x93538
00000000`9b1ddf90 00000000`9a6bc697 : 00000000`cd926e60 00000000`00000000 00000000`00000000 00000000`00000000 : crqe+0x1d1c64
00000000`9b1de000 00000000`b64fcab9 : 00000000`cd926ec0 00000000`9b1de0c0 00000000`00000000 00000000`b6dee2cb : crqe+0x1cc697
The crdb_adoplus tried free a corrupted Heap Block:
0:188> dt DPH_BLOCK_INFORMATION 000000009b1ddb50-40
verifier!DPH_BLOCK_INFORMATION
 +0x000 StartStamp : 0
 +0x004 PaddingStart : 0
 +0x008 Heap : 0x00000000`9b1ddb58 Void
 +0x010 RequestedSize : 0x9b1ddb50
 +0x018 ActualSize : 0x9b1ddb30
 +0x020 Internal : _DPH_BLOCK_INTERNAL_INFORMATION
 +0x030 StackTrace : 0x00000000`00000001 Void
 +0x038 PaddingEnd : 0
 +0x03c EndStamp : 0
is this problem solved by upgrading Crystal Report version to CR12 ?
Thank you,
Best Regards,
Leonardus Tono Amboro
IT Enterprise System Architect
PT Astra International Tbk.
AMDI A Building, 7th Fl.
Jln. Gaya Motor Raya 8. Sunter II, Jakarta 14330, Indonesia
Message was edited by: Ludek Uher
Phone number removed - Please see the SCN Rules of Engagement

Hi Leonardus
Please define "crash". What actually happens?
Did this ever work? E.g.; this started to happen recently?
Is this happening on your development system or QA or production?
See if enabling the option "Verify on 1st Refresh" will help.
Make sure you are using SP 1: Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
Ensure that the dataset is less that a couple thousand rows. Anything more than that will cause issues...
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

SAP Enterprise Service Explorer for Visual Studio 2008

Hi all,
is there a version for SAP Enterprise Service Explorer for Visual Studio 2008?
I have found to fix the localization error.
[http://blogs.microsoft.co.il/blogs/tamir/archive/2008/03/13/localization-fix-for-sap-esa-explorer-for-visual-studio.aspx]
But if i run the exe-file --> You have not a compatible version of VS Studio installed.
regards

Hi,
there will be a new version of the ESE plugin available with the new CE 7.1.1.
regards

Deploying crystal reports basic for visual studio 2008 for VB6

Similar Messages

Maybe you are looking for