Deploying existing system on Web using WebDB

Hello,
My current application is on Oracle 8.0.4 on HP-Unix and
Developer 2000 2.1., Windows NT / 95.
I want to deploy this application on the web.
I am confused as to which Middle tier should I use, Web DB or
Oracle Application Server.
What is the difference between WebDB and Oracle Application
Server?
Whether I will have to redevelop the whole forms and reports or
I can use the existing ones for the web deployment.
Can I use WebDB alongwith Oracle Application Server? If yes,
what are the additional benefits of using both?
Hoping for urgent reply.
Sachin
null

Sachin Borikar (guest) wrote:
: Hello,
: My current application is on Oracle 8.0.4 on HP-Unix and
: Developer 2000 2.1., Windows NT / 95.
: I want to deploy this application on the web.
: I am confused as to which Middle tier should I use, Web DB or
: Oracle Application Server.
: What is the difference between WebDB and Oracle Application
: Server?
: Whether I will have to redevelop the whole forms and reports or
: I can use the existing ones for the web deployment.
: Can I use WebDB alongwith Oracle Application Server? If yes,
: what are the additional benefits of using both?
: Hoping for urgent reply.
: Sachin
This Discussion group is only meant for Headstart Oracle
Designer questions and information. Please use the mail
groups that are available on Metalink.
http://oracle.com/support/elec_sup/ml_login.html
Thanks.
Ton van Kooten
null

Similar Messages

Deploying existing application on Web

Hello,
My current application is on Oracle 8.0.4 on HP-Unix and
Developer 2000 2.1., Windows NT / 95.
I want to deploy this application on the web.
I am confused as to which Middle tier should I use, Developer
Server, Web DB or Oracle Application Server.
What is the difference between Developer Server, WebDB and Oracle
Application Server?
Whether I will have to redevelop the forms and reports or
I can use the existing ones for the web deployment.
Do I have to learn Java or HTML ?
Can I use WebDB alongwith Oracle Application Server? If yes,
what are the additional benefits of using both?
Hoping for urgent reply.
Sachin Borikar
null

Hi
The answer for deployning your current application in forms and
reports is,
you don't have to redevelop your application again.
Developer Server allows to deploy existing forms and reports on
to the web.
Developer Server sits on top of Oracle Applicaiton Server (OAS)
and makes use of web listener component in OAS.
The solution is that you would have to get Developer Server.
You really don't need to learn java or HTML to deploy your
existing forms and reports to the web.
Take a look at the Developer server and webdb links on technet,
they have of technical info and other stuff.
regardsr
raghu
Sachin Borikar (guest) wrote:
: Hello,
: My current application is on Oracle 8.0.4 on HP-Unix and
: Developer 2000 2.1., Windows NT / 95.
: I want to deploy this application on the web.
: I am confused as to which Middle tier should I use, Developer
: Server, Web DB or Oracle Application Server.
: What is the difference between Developer Server, WebDB and
Oracle
: Application Server?
: Whether I will have to redevelop the forms and reports or
: I can use the existing ones for the web deployment.
: Do I have to learn Java or HTML ?
: Can I use WebDB alongwith Oracle Application Server? If yes,
: what are the additional benefits of using both?
: Hoping for urgent reply.
: Sachin Borikar
null

Deploy Forms 6i on Web using SSL *URGENT*

Hi
I have added a SSL certificate to Wallet Manager and changed the certdb file with the text from
"Export all Trusted Certificates".
When trying to run the application, it takes a lot of time and never loads.
Please help.
regards
Edited by: 699704 on Mar 2, 2011 6:43 PM

You should find a lot of papers on the OTN forms's section.

Exposing legacy-system's service using web services

Hi everybody,
     I have questions about how web services can be used with legacy system.
Let�s say I have a server serving stock data. The server is just POJO, it isn�t web module, doesn�t run on any J2EE container and client will request for data using my proprietary API which run over TCP/IP. My question is that what is the best practice or widely used pattern for exposing my stock service through web services.
     I�m not a web service expert so I think the easiest patter may be using web services as an adapter for my API. I�ll use jax-rpc to create web services StockWS.war and deploy it on a web server running on the same machine with my stock server. The web services will, in turn, internally use my proprietary API to request data.
I can see 2 problems in the above approach.
1. The need of web server. Administrator needs to start 2 processes; stock server and the web server containing StockWS.war. It would be great if I can get everything work in one process. Is there any framework or API that my stock server can internally use to intercept soap request over HTTP so that I don�t need a web server and everything is encapsulated in one process?
2. Performance. There will be my API sit between web services runtime layer and my stock server which may cause performance issue. If I can find a framework I�ve mentioned in problem1 then I can get rid of the API layer.
Please ignore my grammar mistakes.
Any suggestion is welcome, and if you have experiences integrating web services with your legacy system, feel free to share it here.
Thanks in advance.

Hi,
With regards to your statemetn "SDN downloaded document says to Generate Webservice URL through ABAP"   <- can you tell me more please? references/links/attachment?
As far as I am aware, that the type of web service required for integration it a 'normal' Netweaver Web app server web service.
There are limitations about the complexity of the WSDL - see Notes:
1653655 - Limitations in Web Service WSDL URL usage in Xcelsius 4.0
1703839 - Limitations of Web service usage in Xcelsius / Dashboard Design
also , changes between SAP versions requires reworking the WSDL
Note 1625091 - The WSDL URL for web service which generated in SAP Enterprise Central Component cannot be loaded into Xcelsius
regards,
H

Deploying existing application (forms and reports) over the web

Hi I do have the following environment:
1) Oracle 8.1.6.0.0 on HP-UX.
2) Application written using oracle forms6i and reports6i on NT (Client-Server environment)
I am looking to deploy this existing application over the web using 9iAS, sure I don't want to rewrite my application. I did that in the past using OAS 4.0.8 and forms server and reports server.
1)Does 9iAS support that, which one should I install the standard or the enterprise.
2)Do I still need forms server and reports server.
I stopped using the OAS because it had problems and the performance was not that good, I found CITRIX and Tarantella do better, performance wise.
3)Does 9iAS has improved that.
Any feedback regading these many questions is highly appreciated
Thanks
Khaled

Sounds like the ideal 9i As environment (although you might want to consider either upgrading or patching the database - 8.1.6.0.0 does have patches)
You'd be pleasantly surprised with the performance and stability improvements of 9iAS over OAS.
Deploying reports & forms over the web (pure web access, not terminal services like citrix) require some form of web server, reports server and forms server. I believe that 9i AS is totally compatible with the reports and forms developed in 6i tools, so there should be no rewrite at all.
If you have the time, strongly recommend you check it out.

Data connection from SAP-R3 System to Xcelsius using Web Services

Hello Everybody,
Anyone tryed connecting data from SAP-R3 System to Xcelsius using Webservices? (created in ABAP function module)
SDN downloaded document says to Generate Webservice URL through ABAP (by creating function module) and import it in xcelsius
Data -> Add Web service connections
by giving the URL to import. After giving the web server login credentials, the error says 'Unable to load URL'
Any idea would be great help
Note: I tried by following the thread & its not working:
http://forums.sdn.sap.com/thread.jspa?threadID=1520321
Thank you,
Anand
Edited by: Anand Amirtharaj on Feb 20, 2012 7:51 AM
Edited by: Anand Amirtharaj on Feb 20, 2012 7:53 AM

Hi,
With regards to your statemetn "SDN downloaded document says to Generate Webservice URL through ABAP" <- can you tell me more please? references/links/attachment?
As far as I am aware, that the type of web service required for integration it a 'normal' Netweaver Web app server web service.
There are limitations about the complexity of the WSDL - see Notes:
1653655 - Limitations in Web Service WSDL URL usage in Xcelsius 4.0
1703839 - Limitations of Web service usage in Xcelsius / Dashboard Design
also , changes between SAP versions requires reworking the WSDL
Note 1625091 - The WSDL URL for web service which generated in SAP Enterprise Central Component cannot be loaded into Xcelsius
regards,
H

How to deploy and debug java web service in eclipes or using any other soft

Hai,
can any one tell me how to deploy and debug java web service in eclipes or using any other software.
i have used tomcat web server and jdk1.4.0 to develop web service.
we have used web service to interact with MS outlook .
bye
sudhakar.m

Hi Sudhakar,
If you are used to working with ant then you can very well use eclipse to deploy your web service.
You would usually have the ant script in the source root working directory. From eclipse if you select the build file from the navigator view and right click you will see a run ant option in the pop up menu.
Select that option and you would be able to see each targets with a checkbox select option. So define each target maybe one for wsdl2java conversion, one for compilation and one for deploying your web services. You can either make all of them run by having depends option on or you can run them individually as it takes your fancy.
I am not sure about debugging a web service yet.
Hope this helps
Aviroop
The truth is out there? Does anyone know the URL?

Changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)

Hello
Maybe not the best section ..
But we have in mind changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)..
I wander what would be pro and what cons?
Thank you a lot
Jan

Hi Jan,
If I understand correctly you are going to perform database migration activity in your present landscape. Firstly you have to contact SAP as well as one of the third party hardware vendor (who is going to provide certified HANA hardware). SAP will provide you all the license details.
For whole your migration activity below link will be helpful:-
SAP BW on HANA Cookbook
Migration to HANA made easy with DMO
Regards,
Rafikul

Deployment of the SiteMinder WebAS module using SDA is no longer supported

I just came to know that "the deployment of the SiteMinder WebAS module using SDA is no longer supported by SAP "
Can any body please verify that how much this is correct.
Also,just out of curiousity, i want to know that do SAP still support SDA as the mean of deploying various modules?
Edited by: David Garrison on Mar 6, 2008 12:27 PM
Edited by: David Garrison on Mar 6, 2008 12:30 PM

To move to Safari 6 you would have to install Lion or Mountain Lion. Perhaps try contacting Google/gmail about the issue and why they are not supporting your version of Safari.

Setup was unable to use existing system partition because it does now contain the requiered free space.

I try to install it, but i select my free (fresh formated) partition with 35GB free space and i see:
Setup was unable to use existing system partition because it does now contain the required free space.
if i select partition with partition that does not contain the required i see
"Windows cannot be installed to Disk 0 Partition 1. (show details)"
so what is it? what can i test?
My Disk has 250GB, my partitions:
C: 8MB - Boot (7MB Free) - FAT
D: 37,5GB - WINXP (27,9GB Free space) - NTFS
E: 35,3GB - New (35,2GB Free) - NTFS - i want to install on it
F: 160GB - Data (6GB Free) - ntfs

kolorafa_ said:
I try to install it, but i select my free (fresh formated) partition with 35GB free space and i see:
Setup was unable to use existing system partition because it does now contain the required free space.
if i select partition with partition that does not contain the required i see
"Windows cannot be installed to Disk 0 Partition 1. (show details)"
so what is it? what can i test?
My Disk has 250GB, my partitions:
C: 8MB - Boot (7MB Free) - FAT
D: 37,5GB - WINXP (27,9GB Free space) - NTFS
E: 35,3GB - New (35,2GB Free) - NTFS - i want to install on it
F: 160GB - Data (6GB Free) - ntfs
Is this 8MB "Boot" partition (formatted as FAT???) something you created when you partitioned this disk for the Windows XP installation, or is this an 8MB OEM partition that you've somehow assigned drive letter C: to?
I wouldn't be surprised at all that your error message is being generated because thsi "BOOT" partition, labelled as drive C:, is only 8MB in size, and you can be absolutely positive that an 8MB partition is going to generate this error: "Setup was unable to use existing system partition because it does not contain the required free space."
The correct answer really depends on whether that drive C: is the boot (sic) (the proper terminology is to call it the system partition) partition for the Windows XP installation. If it is, then you're going to have some repair work to do on your Windows XP installation first, so that you can free up that 8MB partition.
In any event, I'm fairly certain that the solution is going to require the removal of that 8MB partition, as you've suggested in your most recent post.
Lawrence Garvin, M.S., MCITP(x2), MCTS(x5), MCP(x7), MCBMSP
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2009)

Configure Web console for existing "System center 2012 configuration manager R2"

How to configure Web console for existing "System center 2012 configuration manager R2"

There is no web console in ConfigMgr 2012. If you want a web console you have to look at third-party products.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Problem with deployment [credentials error] in Web Dynpro

Hi all,
Suddenly I was not able to deploy anymore.
I am using SAP NetWeaver Developer Studio, Version: 7.0.11, Build id: 200702010238.
For deployment I log with user SDM and some password. The Visual Admin wanted to change the Administrator's password and since then I am not able to deploy my project in Web Dynpro.
I am a little confused actually how changing Administrator's password and not changing SDM's password would lead to such an issue.
I will highly appreciate if somebody could give me a clue about a solution!
Error details -
Dec 11, 2007 1:28:58 PM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : sofD60161589A
SDM port : 53018
URL to deploy : file:/D:/temp/temp51933ToolAddProject.ear
Result
=> deployment aborted : file:/D:/temp/temp51933ToolAddProject.ear
Aborted: development component 'ToolAddProject'/'local'/'LOKAL'/'0.2007.12.11.13.28.41'/'0':
Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more information, see SAP note 701654.
com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthExceptionWrapper: Wrong security credentials detected while trying to obtain connection to the J2EE Engine.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMAUTHEXC)
Deployment exception : The deployment of at least one item aborted
P.S. Please don't reply me with "search the forum..." and don't redirect me to some links. I did it already and it doesn't help. So, please if somebody knows the solution and wants to help - just to do it.
Best regards,
Ogniana

Hi Ognyana,
Do the following Steps,
Use the Config Tool to change the entry in secure storage as follows:
1. Start the Config Tool.
(Execute <SAPj2eeEngine_install_dir> \configtool\configtool.bat.)
2. Select the secure store node.
The configuration for the secure storage in the file system appears.
3. Select the admin/password/<SID> entry.
4. Enter the administrator user's new password in the "Value" field and choose "Add".
5. Choose "File" --> "Apply" to save the data.
Note: Contrary to the message that appears, you do not need to restart the server or cluster for this change to take effect.
6. Finally restart SDM server.
Then deploy.
Refer SAP note 701654
Regards,
Mithu

Adding an e-Commerce template to existing BC online web site?

Has anyone out there started with a Muse design, and after completeing it, then did add an ecommerce template?
There are many ways to get to the mountian... I don't see a path yet.
Conern is for menu integration with the existing client content/web site (created in Muse) and eCommerce Template.
Is this integration possible? Key question.
If so though what interface: BC, Muse, Dreamweaver, Other?
In other words:
Q: How does one join an active client muse site to a BC eComerce Template: what is the best process GIVEN initial client design is in MUSE?
>>>I am going around and around missing the best practice or process to accomlish taking a MUSE on line web site, and ADDING and eCommerce Template so the store is there too.
IS THERE A SIMPLE WAY TO LINK A MUSE SITE THAT IS ACTIVE, TO A BC ECOMMERCE TEMPLATE AND HAVE THE MENUS AUTOMATICALLY ADJUST?
OR DO i have to do something different?
It appears to me that going from a Muse Content created site on BC, to having that same BC site augmented with e-commerce, needs to be done in the BC on line interface versus Dreamweaver or Muse.
Perhaps it is a matter of order.... template first but then how to use MUSE to do the front end...
????? I must be missing some simple concept here....
Getting ready to experiment and hoping for some pointers as I start the challenge of the process. After looking on line and asking questions of BC and others... i have a couple of man days into this scenario. Hoping for insight from the BC universe! lol... thanks y'all.
Cheers!

Sorry . i am a bit lost and under pressure to perform on this project...
just attempting to find help. I am new to asking for help in this system,
but desperate to move ahead... BC is the product that is most important
here: Muse is great ... however... I can do without muse... but can not
accomplish this project without the functions of BC.

Which system shall I use?

anyone work inside sap knows which existing system has the MI SERVER COMPONENT installed?

Hello Irene,
MI 2.5 Server Component is shipped with WEBAS 6.40.
You have to install ABAP and Java Stack. MI Server Part does not have to be deployed seperately. After installtion of WebAS 6.40 a few steps are nescessary. You will find them here:
http://help.sap.com/saphelp_nw04/helpdata/en/bb/b670bbaa991845924982155b7c3726/frameset.htm
In Mobile Engine 2.1 you also have to deploy the sync servlet and the Web Console to the J2EE on the MI server.
This is not needed with WEBAS 640 and MI2.5.
Regards
Frank Brackmann

How to create the Custom project System as Web Project

Hi,
I have created a custom project system using this walkthrough. But
this walk through is targeting Visual C# project system. I need to create the Custom project system as Web project and set the start up page as index.html file. How can I achieve this?
Note:
I have got the Custom project system sample from VS2013 SDK samples(https://mpfproj12.codeplex.com/).
But it demonstrate the Custom console applications only.
- Abbas K

Hi,
So you didn't even follow this walkthrough yet? If you did, how did you do it?
I failed to create such a web project system because I finally messed up my VS experimental instance. But it's possible to create a custom web project system, by following this walkthrough. Someone else has successfully made it, check this
link.
The difference is that you have to use web project type instead of the console application project type. You could copy a web project's .csproj file into the VSPackage project and rename it to xxx.myproj. There's an error in the walkthrough that the AssemblyInfo.cs
file should be put into Properties folder and set the "Build Action" property to Content, "Include in VSIX" to true.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Deploying existing system on Web using WebDB

Similar Messages

Maybe you are looking for