Deployment analysis error

We made sure all of addressing was relative and changed the directory name of our code to conform to our ClearCase naming conventions. I load the ws file and the main sequence after which the tests come up and run normally. However we are having build problems. When running analysis from the Distributed Files tab I get the following warnings and error.
Any suggestions?
Warning: This problem will cause an error when building a deployable image or an installer. The following file(s) were not found:
Dialogs\PreUutIF.vi in step 'Get UUT Information', sequence 'PreUUT', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MASTRV-CalAndTest.seq'
MASTRVCalAndTest.vi in step 'Initialize System', sequence 'PreUUTLoop', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MASTRV-CalAndTest.seq'
Transmitter\MvTransmitter.vi in step 'Power Up TX', sequence 'txPowerUp', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MVTX.seq'
Traffic Controller\MvTrafficController.vi in step 'Power Up TC', sequence 'tcPowerUp', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MVTC.seq'
Switch\MvSwitch.vi in step 'Power Up SW', sequence 'swPowerUp', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MVSW.seq'
Receiver\MvReceiver.vi in step 'Power Up RX', sequence 'rxPowerUp', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MVRX.seq'
Linearizer PA\MvLinearizerPA.vi in step 'Power Up LN', sequence 'lnPowerUp', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MVLN.seq'
Baseband Processor\MvBasebandProcessor.vi in step 'Power Up BB', sequence 'bbPowerUp', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MVBB.seq'
Dialogs\DirectionsIF.vi in step 'Connection Instructions', sequence 'bbPowerUp', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MVBB.seq'
Report\MvReportIF.vi in step 'Reset Report', sequence 'EA-555005-001', sequence file 'C:\__views\calTest_jhite\mastrv\automated_tests\MastrvCalAndTest\TestStand\MVBB.seq'
+++++++++++++++++++++++++++++++++++++++
An Error Has Occurred
Error Code:1
Invoke Node in TestStand - Match Visisble and Selected Items in Tree View.vi->TestStand - Update LV Tree View.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi

Please have a look of this link : http://forums.ni.com/ni/board/message?board.id=330&message.id=19046&requireLogin=False
Hope this gives you some idea of solving your issue.

Similar Messages

Deployment Manager Error with Oracle Weblogic Server 10.3.1

I have installed Identity Manager 9.1.0.2 (patch upgraded from 9.1.0.1) on OEL 5.3 64bit and Weblogic 10.3.1
Database:Oracle 11gR2 (remote machine).
**I am aware that IM 9.1.0.2 is not certified on Weblogic 10.3.1 (it is only certified on 10.3),
The installation was successful and OIManager is up and running. Able to create Users, Resources etc. as well.
As part of configuring OIM Connectors tried to Import .xml file using Import option from Deployment Management section as below and the following error was displayed.
"Either your session timed out or you are trying to access a page without logging in".
Did all workarounds like enabling java, changing browsers, restarting machine etc as per the below discussion but in vain.
Deployment Manager Error with Oracle Weblogic Server
Can any one suggest any workaround or solution for this problem.
Or atleast can any one confirm there is no Identity manager available on this date which is compatible with 10.3.1? and cannot be continued further.
Thanks in Advance
Sudheer
Edited by: SudheerPrabhala on Oct 20, 2009 1:26 AM

You are facing this issue because you're using a non certified combination.
Other folks who tried to use OIM in 10.3.1 ended up in the same problem you're facing.

I/o server shared variable not working in deployment system ( error no-1950679034 (0x8BBB0006) (Warning))

Hello ,
am using shared variable from opc client in labview when am run a exe file at development system its working fine but when am running it in deployment system its not working am using same configuration file in opc server at development and deployment system error -1950679034 (0x8BBB0006) (Warning)

First Root cause needs to be identified before any actions.
I would suggest first check if you can access the shared variable hosted in PC from RT using other ways like using SVE API (Logos and PS protocols, Datasocket etc..)
Check if antivirus or firewall is playing...
Check the same experiment with some other PC if you can.
You can also try creating another Shared Variable in RT and binding the same to the PC and try to access it...
Since you have did all the reinstallations already
Best Regards,
Vijay.

Deploy occurs errors after rename project.

deploy occurs errors after rename project.
local project (in JAVA perspective refactor->rename)
then rebuild,create,deploy.an erros occurs:
2009-5-19 9:35:35 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[013]Deployment aborted
Settings
SDM host : 10.98.3.59
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/ADMINI1/LOCALS~1/Temp/temp6550783345363564101WYJ_WD_FlightList.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ADMINI1/LOCALS~1/Temp/temp6550783345363564101WYJ_WD_FlightList.ear
Aborted: development component 'WYJ_WD_FlightList'/'local'/'LOKAL'/'0.2009.05.19.09.30.59'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application local/WYJ_WD_FlightList.. Reason: Clusterwide exception: Failed to deploy application local/WYJ_WD_FlightList. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application local/WYJ_WD_FlightList. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
Can anyone help me?
thanks a lot!

Thanks for Rajat Jain and Umang Mathur 's answers 。
the demo project can be download in SDN::TutWD_FlightList.zip
before i sign this thread ,i've followed the issue : (project folder，.project file )
Rename package for an existing Web Dynpro App
tips:if i only change .project file,i can not import the project.
but these do not work。it shows the same erros.
after then i just try to redo this in the other way: (in java perspective ,refactor->rename)。
it shows the same errors.
my environment:
studio:Version: 7.0.11
JAVA AS:7.00 sp18

Deployment failed error - need of five star - please answer this

Dear All ,
One of 100 error iam facing daily on LV 8.0
I have made my project in my laptop and started the application it work fine in laptop .
but same .lvlib file i have transfered to server (only modification i did is in the shared variable) iam receiveing deployment failed error .
Please find the attachment and give some hint to solve this problem.
Attachments:
deployment error.jpg ‏74 KB

ramji,
I think the following kb How Do I Deploy Network Shared Variables From a Compiled Executable? may provide some help. When building your executable, make sure you include your lvlib that contains yoru shared variable in the "support files" section of the application builder. Also, try including your lvlib in the data directory instead of the actually exe itself. Let us know. thanks!
Chris c
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

Software Update Deployment - Job error (0x80072f0c) received for assignment

I'm deploying a software update to my test clients but half of them failed with error below;
UpdateStore.log -
Failed to refresh sync message. Error = 0x87d00310.
WUAHandler.log
OnSearchComplete - Failed to end search job. Error = 0x80072f0c.
Scan failed with error = 0x80072f0c.
Updates Deployment
Job error (0x80072f0c) received for assignment ({0F2CA22F-BB7A-4ED8-9794-15AB24B83E09}) action
Do you have any recommendation ?

Since no one has replied to this post, I recommend that you contact Microsoft Support (CSS) directly, they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Library resource is in the missing state and cannot be deployed. (Error ID: 23004)

Hi experts,
I have SCVMM version 2012 Service pack 1 installed in my Windows Server 2012. It is managing 3 Hyper-V hosts.
I have custom Linux VM running. I have created Linux VM templates and stored them in VMM Library.
When I try to create a new VM using the VM Template, I am getting the below error
Library resource my-linux.iso is in the missing state and cannot be deployed. (Error ID: 23004)
Could you please help in resolving this error?
I tried with Powershell New-SCVirtualMachine command, but getting the same error.
Thanks in advance,
Saleem

VM Templates cannot have attached ISOs (SCVMM cannot deploy a new VM from template with an ISO attached)
Was an ISO attached to the VM when you created the template?
If so edit the properties of the VM template and remove it.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Analysis errors during deployment build

Ok,
I have been rrting to figure this one out for hours.....but I just don't get it.
I am trying to created a build from my TestStand project. However, I get the warnings listed below when doing the analysis. This also happens when I try using the stock parallel model too.
Any thoughts to what is causing this and how to correct it?
Thanks,
Ryan
+++++++++++++++++++++++++++++++++++++++
Starting Analysis
Processing Workspace...
Workspace Processed
Finished Analysis
Warning: You may need to add any sequence file(s) referenced by the following expression(s):
"reportgen_" + RunState.Root.Parameters.ModelData.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'SequenceFilePostResultListEntry', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
"reportgen_" + RunState.Root.Parameters.ModelData.ReportOptions.Format + ".seq" in step 'Process Step Result', sequence 'ProcessModelPostResultListEntry', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Set ReportOptions based on ReportStyle', sequence 'Get Report Options', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Footer', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Header', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Get Report Body (Sequence)', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
"ReportGen_" + Parameters.ReportOptions.ReportStyle + ".seq" in step 'Get Report based on ReportStyle', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
"ReportGen_" + Parameters.ReportOptions.Format + ".seq" in step 'Set Report Disabled Message', sequence 'TestReport', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Single Pass -- Test Socket Entry Point', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs -- Test Socket Entry Point', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
Step 'Call Requested Sequence', sequence 'ProcessDialogRequests', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
RunState.ProcessModelClient in step 'Create Test Socket Execution', sequence 'Initialize TestSocket', sequence file 'C:\Program Files\National Instruments\TestStand 4.2.1\Components\Models\TestStandModels\PROG_ParallelModel.seq'
Solved!
Go to Solution.

This is just a warning letting you know that a sequence file is called by expression. The deployment utility cannot determine what sequence file will be called, so it warns you to let you know to make sure you include it. In this case, all of the reportgen_xxx.seq files need to be included. You cannot make this message go away without hardcoding sequence file names. There is nothing wrong with getting this warning as long as you make sure you include everything it might call.

Test Stand Deployment; Internal Error Code 1

Hi,
I get the following message from the deploymeny tool when trying to deploy my system...
Internal error code 1 Processing VIs...
An installer was not created due to an error
I have mass compiled everything and all the VIs are working, my workspace processes okay and the sequences run okay in the Run time Engine adaptor of Test Stand.
Any ideas what could be causing this? I have Test Stand 4.0.0 and labview 8.5.
Many thanks
Matt

Hi Rick, see below cut and paste from this file, does this help?
08:55:43tarting Log.
08:55:45tarting Analysis
08:55:45tarting to process workspace file
08:55:56one processing workspace file
08:55:56:Finished Analysis
08:55:57:Building...
08:55
08:57:01:Internal error code 1 Processing VIs...
08:57:01:Could not process LabVIEW VIs. Fix any broken VIs before rebuilding. LabVIEW error:
Error copying files.
Source:
Destination: <Not A Path>
Librarian Path Location.vi
<Call Chain>Error 1 occurred at ABAPI Dist Copy Non-VI Files.vi -> ABAPI Dist Build LLB Image.vi -> ABAPI Copy Files and Apply Settings.vi -> TestStand - Build VI Distribution 8 AX Wrapper.vi -> TestStand - Build VI Distribution 8 AX Wrapper.vi.ProxyCaller
Possible reason(s):
LabVIEW: An input parameter is invalid. For example if the input is a path, the path might contain a character not allowed by the OS such as ? or @.
=========================
NI-488: Command requires GPIB Controller to be Controller-In-Charge.
08:57:01:An installer was not created due to an error
08:57:01:The build is finished
08:57
08:57:01:Aborted
08:57:01:---------------------------------------
Many Thanks
Matt

TestStand Deployment Utility Error

I am getting the error below when attempting to build a TestStand deployment. I am running TestStand 4.2.1.83 and LabVIEW 2009 Service Pack 1 Version 9.0.1f3. Any help would be appreciated as I cannot find any of the VIs mentioned in the error. Thanks!
Starting Log.
Starting Analysis
Processing Workspace...
Workspace Processed
Finished Analysis
Building...
10:15 AM
Internal error code 6503 Processing VIs...
Could not process LabVIEW VIs. Fix any broken VIs before rebuilding. LabVIEW error:
Exception occured in LabVIEW: LabVIEW: The VI is not executable. Most likely the VI is broken or one of its subVIs cannot be located. Select <b>File>>Open</b> to open the VI and then verify that you are able to run it. in Dynamically Call Build VI Distribution LV 8.6 or Above - TestStand.vi->TestStand - Call Build VI Distribution for Unique VI Hierarchies LV 8.6 or Above.vi->TestStand - Package VIs.vi->TestStand - Build.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
An installer was not created due to an error
The build process is done.
10:15 AM
Aborted
Solved!
Go to Solution.

Hello George Mah,
I found CARs # 258761 and # 3OP9RE6I for TestStand which may be related to this issue and to error 6503. The error was created because VIs with duplicate names were included in a deployment. Would you verify that you do not have any duplicate VIs in your project? Are you noticing anything else strange with your deployments? Have you tried creating a blank deployment that only includes the TestStand engine or a run-time engine?
Regards,
Shawn S. | NIC
Instrument Driver/IVI PSE
National Instruments

TestStand Deployment build error

Hi,
I am using TestStand deployment tool for the first time. I am getting an error and I am not able to fix it. It is a reference to Query Available Printer.vi (which I don't use in my projet, unless one of the instrument driver is using it). I checked the file and it is not broken. If I just perform the analysis, everything is fine though. It is only when I build that I run into it.
I am not including any of the TestStand or System32 files in the build. I am not including User Interfaces file either. Finally, I don't install TestStand Engine or any other Drivers or Components.
Thanks
Alexandre Boyer
Here is the deployment log file :
Starting Log.
Starting Analysis
Starting to process workspace file
Done processing workspace file
Finished Analysis
Building...
1:46 PM
An installer was not created due to an error
The build is finished
1:50 PM
Aborted
Warning: You may need to add any sequence file(s) referenced by the following expression(s):
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'TestComponent', sequence file 'C:\Projets\Opnext\OTM-440 Manufacturing Test Stations\Trunk\Technical\D - Execution\TestStand 4.0\Components\User\Models\TestStandModels\ProligentSequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Routing Entry Point', sequence file 'C:\Projets\Opnext\OTM-440 Manufacturing Test Stations\Trunk\Technical\D - Execution\TestStand 4.0\Components\User\Models\TestStandModels\ProligentSequentialModel.seq'
RunState.ProcessModelClient in step 'MainSequence Callback', sequence 'Test UUTs', sequence file 'C:\Projets\Opnext\OTM-440 Manufacturing Test Stations\Trunk\Technical\D - Execution\TestStand 4.0\Components\User\Models\TestStandModels\ProligentSequentialModel.seq'
Locals.ModelPath in step 'Call PostUUT of the Process Model', sequence 'PostUUT', sequence file 'C:\Projets\Opnext\OTM-440 Manufacturing Test Stations\Trunk\Technical\D - Execution\TestStand 4.0\Components\User\Callbacks\Station\StationCallbacks.seq'
Locals.ModelPath in step 'Call PreUUT of the Process Model', sequence 'PreUUT', sequence file 'C:\Projets\Opnext\OTM-440 Manufacturing Test Stations\Trunk\Technical\D - Execution\TestStand 4.0\Components\User\Callbacks\Station\StationCallbacks.seq'
Locals.ModelPath in step 'Call PostUUT of the Process Model', sequence 'PostUUT', sequence file 'C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.1.1\Components\Callbacks\Station\StationCallbacks.seq'
Locals.ModelPath in step 'Call PreUUT of the Process Model', sequence 'PreUUT', sequence file 'C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.1.1\Components\Callbacks\Station\StationCallbacks.seq'
Warning: The following dependencies were detected but not selected; you must decide if they should be included:
C:\WINDOWS\system32\kernel32.dll
C:\WINDOWS\system32\user32.dll
C:\WINDOWS\system32\advapi32.dll
C:\WINDOWS\system32\ole32.dll
C:\WINDOWS\system32\version.dll
C:\WINDOWS\system32\SHLWAPI.dll
C:\WINDOWS\system32\msvcrt.dll
C:\WINDOWS\system32\mscoree.dll
C:\WINDOWS\system32\KERNEL32.dll
C:\WINDOWS\system32\ntdll.dll
C:\WINDOWS\system32\USER32.dll
C:\WINDOWS\system32\GDI32.dll
C:\WINDOWS\system32\ADVAPI32.dll
C:\WINDOWS\system32\RPCRT4.dll
C:\WINDOWS\system32\Secur32.dll
Error: Unable to find all subVIs from saved VIs, either a subVI is missing or the VI is not saved under the current LabVIEW version.
The missing file path is:C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\printing\Query Available Printers.vi
while Processing VIs...
+++++++++++++++++++++++++++++++++++++++

Do you have the sequence files in your project that it lists?
C:\Projets\Opnext\OTM-440 Manufacturing Test
Stations\Trunk\Technical\D - Execution\TestStand
4.0\Components\User\Models\TestStandModels\ProligentSequentialModel.seq
I recommend going over chapter 14 of the TestStand reference manual with a clean sequence and attempting to deploy to a clean computer. Once you can get that to work, deploying with your actual code is much easier.
http://digital.ni.com/manuals.nsf/websearch/D4A50986EECCF7218625757C00697617
Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

Deploying Analysis Services Project Failed to encrypt sensitive information

Hi!
I had a problem on a server when trying to implement a project analysis services and I get the
error:
"Failed to encrypt sensitive information. Perhaps the encryption key is inaccessible due to incorrect change the service account"
I have no idea how to solve this problem and where to get it.
can anybody help me?
Thanks in advance...
Akala

The package was probably created with the
default protection level "EncryptSesntitiveWithusrKey" by somebody else than who logged in to the machine to install.
If you deploy it by importing to MSDB/SSISDB then it needs to be set to "ServerStorage".
Arthur
MyBlog
Twitter

Starting deployment prerequisites: error in BI-Java installation sapinst

Hi all,
We are in process updating Bw 3.5 to BI 7.0 we hace sucessfully completed the Upgrade but while installing Bi java thru Sapinst in third step like java instance installtion i was stck with the below error.
We have downloaded the Cryptographic file and placed in jdk folder still the same problem is coming.
Please suggest...
Thanks,
Subhash.G
Starting deployment prerequisites:
Oct 13, 2007 2:42:18 AM Error: Creation of DataSource for database "BWQ" failed.
Original error message is:
com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..
Stack trace of original Exception or Error is:
com.sap.sql.log.OpenSQLException: Error while accessing secure store: Encryption or decryption is not possible because the full version of the SAP Java Crypto Toolkit was not found (iaik_jce.jar is required, iaik_jce_export.jar is not sufficient) or the JCE Jurisdiction Policy Files don't allow the use of the "PbeWithSHAAnd3_KeyTripleDES_CBC" algorithm..

Problem solved followed the notes 1063396.

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Deploy Exception Error while Deploying DCs in NWDS 7.3

Hi
I have this following error while deploying the DCs into the AS Java.
"Deployment Exception during deployment phase [DeploymentException], cause=[ASJ.dpl_dc.001085 Operation [deploy] of [demo.sap.com_dc] failed] "
The DC which i created is a Dictionary DC Which contains Tables created from the entities in EJB DC.
Thanks
Teja

Hi Ervin,
Thanks for your help. The error I was getting is resolved. It was due to Higher version of NWDS (version including SP and PAT needs to be considered).
On checking the stack throughly I came up with the error:
"The given process model was built with a NWDS or development track of a higher version than the target runtime. Revision number of built process model: 4.4. Revision number of process runtime: 4.3. Please refer to SAP note 1600131 for details......"
One thing learnt:- First thing you need to check is the exact version of SAP PO including the Service Pack and Patch Level.
You can check this from:
1. Directly through the URL:: http://<host>:<port>/sap/monitoring/SystemInfo
2. From http://<server>:<port>/ -> System Information -> Component Information
The NWDS should be either less than or equal to the version of SAP PO. You need to check all the details including Service Pack and Patch level.
Ex- If the version of your PO is 7.30 SP 08 PAT 0000
You cannot deploy SAP PO server with 7.30 SP 09 PAT 0000 nor 7.30 SP 08 PAT 0013.
You can consider 7.30 SP 08 PAT 0000 or less than that.
*** In our case, although the SAP PO and NWDS are of same version i.e 7.31. But the higher SP and PAT of the NWDS was giving the error.
Regards,
Atreyee

Deployment analysis error

Similar Messages

Maybe you are looking for