Deployment Optimizer - Modeling question
I am new to the Deployment/Optimizer area. I have modeled a scenario as described below.
And have a few questions on what I would like to happen during deployment.
Central DC: CDC1, Regional DCs: RDC1 & RDC2
Product gets deployed from Central CDC1 to RDC1 & RDC2. I have customer demand and forecasts at all the three locations.
I have defined ATD Receipts category group as just Stock on hand only (category CC) and ATD Issues includes AY, BH, BI,
BM, BR, EB etc. These two categories are assigned to the Location Master.
I have specified Fair Share Rule "A" in the Product master and location dependent penalty costs in SNP1 tab.
In the Deployment Optimizer profile I have mentioned that the Distribution is based on Lowest Costs for both Supply Shortage
and Supply Surplus. I have defined a Pull Depl. Horizon of 10 days, and blank for Push Deployment and SNP Checking Horizon.
When I run the deployment with all the three locations, what I notice is that the Customer orders and forecast of the Central DC are
satisfied before deploying anything to the Regional DCs.
My requirement is that the Central DC should deploy the available quantity at the Central equally among the Centrals and the Regional
DCs on a fair share basis for the Sales orders first, then the remainder of the stock should be deployed, again among Central and
Regional DCs on a fair share basis for the forecast and the safety stock is the last.
How can I achieve this equal deployment among central and regionals even though Central is the source location.
Could somebody let me know how to model this above requirement?
Thanks,
Venkat
Hi Venkat,
I am trying to model the exact scenario where the ATD quantity is not being equally split but the whole chunk is being sent to one of the destination locations. Can you please let me know how you have setup the cost models.
Regards
Similar Messages
-
Change in Deployment Optimization Profile
Currently in Deployment Optimization Profile--- Deployment Parameter View--- SNP Checking horizon is 4 days
If this Parameter (SNP Checking horizon) is changed to 7 days what will be its effects on the current scenario
--Advantages & Disadvantages.
Kindly highlight your views/ comment on above scenario.
Thanks & Regards
Shashikant SalunkhePls go thru F1 of SNP Checking horizon. You can get the Answer for your question.
-
Deployment Optimizer - Equal weightage for all the locations in the network
Hello All,
I am having difficulty in assigning equal weightage for all the locations in the deployment network. My scenario is as described below:
Deployment Source location: LOC1
Destination locations: LOC2, LOC3
I am running Heuristics to plan LOC2, LOC3 & LOC1, followed by
a Deployment Optimizer run at LOC1 to deploy to LOC2 & LOC3.
ATD quantity at LOC1 is always calculated after saftisfying the requirements at LOC1 and the remainder is deployed to LOC2 & LOC3 based on the cost settings. This seems to be the case even if I don't run the heuristics at LOC1 and start deployment optimizer after running the heuristics at LOC2 and LOC3.
The need at this client place is that all three locations are equally important even though LOC1 is the only deploying source location.
This applies for all demand categories i.e. Sales orders, Forecast and forecast at all the three locations.
I would appreciate if anybody has done this kind of configuration before and let me know how to model this.
Thanks,
VenkatHave you follow all this checking ?
If you think that you already follow all the steps, but the value is not as per your config, you can raise ticket to SAP about it.
But I suggest you to double check your computation.
To determine a vendor's price level, the system compares the vendor's effective price with the market price for the material.
1. The system first checks whether the buyer has maintained a market price for the material or the material group.
2. If not, the system calculates the market price which is equal to the average of the effective prices for all vendors supplying this material. Prices from purchase orders and prices for subcontracting are dealt with separately.
3. The system then applies the effective price for the vendor from the conditions.
4. The vendor's effective price is then compared with the market price and the percentage variance determined.
5. The system then assigns a score to the variance in accordance with the settings made in Customizing.
6. This score is valid for the material, that is, at info record level. Since the score the vendor receives for a subcriterion is based not on an individual material, but on the total of all the materials he supplies, the following steps are necessary:
7. The system repeats the comparison between effective price and market price for each of the vendor's materials.
8. The system calculates an average from the sum of the scores determined. This average represents the vendor's score for the subcriterion Price Level.
Edited by: w1n on Apr 19, 2010 2:35 PM -
Hi,
I'm starting to use SSAS tabular mode and have a question.
I created a model and named it Subscriptions and was now making a report to query it. However it was deployed as Model. I went to the project properties and noticed that the Cube Name was set to Model.
This means that I can only have 1 model per SSAS Tabular project? I tried to add a new Tabular model and it says I can only have 1 bism file in a project.
ThanksIt's a balance. Fact tables or subject areas that will be queried together or side by side should be in the same model. Unrelated subject areas can go in a different database if you like. Yes, you are balancing duplicating dimensions across several models
with the complexity of managing one huge model.
http://artisconsulting.com/Blogs/GregGalloway -
Does Deployment Optimizer need a separate server?
We just finished blue-print and came to a conclusion to use SNP Heuristics and Deployment Optimizer. Since we are not using SNP Optimizer, my question is that should we need a separate server?
I did not find any quicksizer document for Deployment Optimizer however, I could see for SNP Optimizer though.
Any help would be appreciated.
Thanks,
C.A.Any Optimiser (SNP / Deployment / PPDS / TPVS / CTM) will need Optimiser Server connection as the Optimiser Routines are .exe files requiring a Windows-based hardware with sufficient Main Memory (RAM).
Deployment Optimiser will be part of SNP Optimiser Engine.
Somnath -
Reg: Error while deploying the Model
Hello All,
I developed a Model in the VC.
The compilation of the model was successful.
But when I tried to deploy the model I'm getting an Error message saying :
"Error in executing a process for Flex compilation, Not enough space" .
Can anyone tell me what to do to resolve this problem ?
Regards,
Deepu.KHi colleagues,
We also encountered this problem here at our customer´s system .
We told the basis administrators to increase the disk space which did not solve our problem, though.
After successfully compiling the vc model
Deploying with FLEX2 results in an error as follows:
"Process is not executed!"
while deploying with flex1 resulits in the error
"Error in executing a process for Flex compilation, Not enough space"
Since everything has been working smoothly for the last months until now,
we wonder how this error has suddenly occured.
Does anyone have an idea how to trace the error or has anyone encountered this error, too?
Thanks in advance!
Gideon -
Java Script Error while deploying a Model with Value Help
Hi,
I am using EP 7.0 SP 10.
I am trying to deploy a model which includes the Value Help for an Input field, and i am trying to deploy this model.
The model compiles successfully, but gives a Java Script Error while deploying the model,
! Error on Page
When Click on this java script error, it shows that ,
Line:14985
Char 1: Error
object does n't support this property or method.
code
URL: <serverhost>/VCRes/WebContent/VisualComposer6.0/bin/223334.htm?24102006.1712.
The Same model works in dev server, and it fails in the production server.
Thanks and Regards,
SekarHi jakob,
Thankyou for your quick response.
I did a basic model with the help of a documentation which i got from this forums.I created a iView and from there i used Bapi "BAPI_SALESORDER ".
I created a Input Form and a outpot form (table view).I tested model and am able to get the output.but when i try to deploy it is giving me the error.
And i think am not paring any formulas here.
Please guide me.
thanks and regrads
Pradeep.B -
Error while deploying ADF Model Project to OIM 11g R2
Hi
I am getting the following error when deploying ADF Model Project in OIM 11g R2
oracle.jbo.NoDefException:JBO-25058: Definition UsrLastName of type Attribute is not found in UsrLastName
any inputs is appreciated...thanks in advance....See if you can find something helpful in the following links:-
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2329750
oracle.jbo.NoDefException: Error in Quick Search when we use View Criteria -
Need SRM Library and model question
Hello,
I am going to write SRM Certification Exam.
can any body help how to down load the SRM Library from internet,i wanted to prepare offline in home.
and also need some model question papers and material.
pl.send to my e-mail:[email protected]
thanks.Hi
<b>Please download the SAP SRM Libraray from the link below.</b>
http://help.sap.com/content/documentation/sbs/docu_sbs_srm.htm
Also, Sent the require details at your email id. )
Regards
- Atul -
I need scjp 1.5 model questions...
i am preparing for SCJP1.5 which i should have to write before the end of this year.
i am reading Kathey sierra for that.
and i am testing myself by doing questions in Danchilosm and khalid moghal book.
one more thing is i have test killer also...
let me know the name of the sites from which we can get similar model questions in SCJP exam.
can you help me by sending response?don't crosspost.
-
I want scjp1.5 model questions......
i am preparing for SCJP1.5 which i should have to write before the end of this year.
i am reading Kathey sierra for that.
and i am testing myself by doing questions in Danchilosm and khalid moghal book.
one more thing is i have test killer also...
let me know the name of the sites from which we can get similar model questions in SCJP exam.
can you help me by sending response?You can also try this website
http://www.javaranch.com/
This site was originally created by Kathy Sierra -
SRM4.0 procurement cerification model questions
Hi All,
Could you please forward me SRM4.0 procurement cerification model questions and any helpful material regarding this.
Reward points are sure.
Thanks in advance.
Regards,
MuraliHi,
Thanks for your immediate response.
My mail Id: [email protected]
Regards,
Murali -
Ibm Written Test Model Questions Plz
Hi Experts
Can Any one send me IBM written test model questions plz .tomorrow i have test with IBM .....
Thnx In Advance....Hi,
you can have the material in the following link.
http://www.123eng.com/forum/viewtopic.php?t=105
HOpe it could help you.
Note: plz reward with points if it is useful to you.
regards
Rakesh -
SAP Netweaver Certification model questions
Please can any one post SAP Netweaver Certification model questions.
Thanks
VK
Message was edited by: Venu KanjarlaHI tadm10_1 and tadm10_2 and tadm12_1 and tadm12_2 and tadm 51 i have this pdf if u want mail me [email protected] (for cost)
-
Dear Experts,
I am planing to attend the SAP Tech for CRM Sales( Professional). If any body is having the model question of CRM Pls guide me . It will be helpful for preparing the SAP Tech( CRM Sales - professional).
Regards
AshwiniHi Ashwini,
Check this out....
http://www.sap.com/services/education/certification/levels/crmsalesexam.epx
Amit
Maybe you are looking for
-
I have Design and Web Prem (Mac) I just got a new PC can I auth this too?
I have Design and Web Prem (Mac) I just got a new PC can I auth this too?
-
Feature Request: RGB Histograms / Tone Curves
Hi team, It would be really helpful to be able to view the RGB Histograms separately in addition to a composite (rather than the "compact" mode we have now). It would also be really helpful to be able to adjust the Tone Curve applied to an individual
-
Would like password authentication to install an application
Hello - I'm the administrator of our home computer and would like other users (with no administrator privileges) to have to authenticate a download from the internet (Safari, for example). A password is requested when the download is done through 'So
-
Account not store in this store
Account not in this store. Your account is not valid for use in the u s store u must switch
-
Program to work like PC Paint program
I need to enlarge a stain glass pattern. On my old PC I could "open an image" into the Paint program and do "Scale" to 200% and it would break up the image into 4 pages that I tape to make one large pattern. On my old G4 computer there is a program t