Description about the generation of a documentation to selfwritten Program?
Hello,
I want to write a documentation to my ABAP-Programm but I don't find the documentation/description to do this. Is there a description in the official online-help or a tutorial about this. I want to know something about the symbols &PREREQUISITES&, &Titel& and the other documentation-symbols too. Thank you.
Regards, Lars.
Hi Lars,
Pls follow these steps for ABAP report documentation.
Goto SE38.
Enter the program name.
Select the 'documentation' radio button.
Press Change
In the next screen you can enter your documentation.
This will appear in the selection screen of the report. There will be an information button on the application toolbar.
Thanks
Vinod
Similar Messages
-
How can i print the description about the field?
dear folks
i want to develop a report in that i want to display all fields in MM03 for all views.
there i want to display first Field description (not field name), then field value.
ie, for MATNR:
Material Number = xxxx (value)
for SPART:
Division = d1.
how can i print the description about the field?CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
tabname = 'MARA'
FIELDNAME = 'MATNR'
TABLES
dfies_tab = t_dfies
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
you will get all the info for the field in t_dfies in that u have the field description also
run the above FM from se37 and pass tabname = MARA and fieldname = MATNR
see the results in DFIES_TAB in internal table -
A question about the multiple RS-232 ports with Labview program?
Hi Sir/Madam,
I am using ME9100/82 card from ICS electronics company to connect the computer with multiple
instruments. I first connect card with ME-D9/8 on which there are 8 RS-232
ports, and then use every port to connect one instrument. My question
are :
1. How can my program identify which port, i.e. what can I do in my
program to send a command to port 1 not port 2, for instance?
2. Can I send one command to the 1st instrument and the other command to 2nd
instrument at the same time?
3. I am using Labview to compile a program, and the version of Labview
that I am using is 6.0. How can I implement send several commands to
different instruments at the same time? Could you please provid
e a simple example in Labview 6.0 for the multiple ports communication?
4. Has any one used MKS 937A, MKS 600 Series and MKS 247 instruments? Could you please provide an example for displaying parameters in Labview 6.0?
Thanks a lot.Under the Instrument I/O section of the Function Palette there is a indicator called VISA Resource Name Constant click on that and drag it to your diagram, right click and change it to a control. On the Panel this will automatically allow you to choose any ports available ( add in one for each port you want to use). Add in a VISA Configure Serial Port for each port and plug the terminal to the resource name into it then just add in the functions you what it to do (read, write, etc.) just as if it were the only port.
Also on the panel side go under file on the toolbar and select vi properties, select execution, and where it says preferred execution system select other1 to allow each port function to run parallel.
Attachments:
example.vi 47 KB -
Description of the ETL solution Oracle
Hi,
I would like to have answers for questions below :
*2. Description of the ETL solution Oracle*
=> Software name: (i thinks it's Oracle Data Integrator)
=>Version:
=>Platforms:
=>Products to be installed before the solution:
=>Hints that may create conflicts with other applications:
*3. ETL Solution Architecture*
*3.1. Architecture Description*
=> Hub & Spoke Architecture:
=> Peer to Peer Architecture:
=> Bus Architecture applications:
=> Architecture code generator:
=> The solution she parallelization treatment?
=> Does it allow the installation of remote engines?
=> Does it load balancing?
*3.3. Nature Repository*
=> Nature Repository:
*3.4. Power Repository*
=> The solution supports she metadata standards?
=> Does it allow data exchange with:
=> Does it allow the exchange of metaName?
=> If Yes, what métadictionnaires?
*3.5. Repository Management*
=> Are there specific backup procedures?
*3.6. Access to the repository*
=> The repository is it accessible to external tools?
*4. Data Access*
*4.1. Access to relational data*
*4.1.1. Access modes*
=> ODBC (for each source / destination):
=> JDBC (id)?
=> Native (id)?
=> Asynchronous (loaders, etc.). (Id)?
=> Other means? Other middleware?
=> Agreements with suppliers of middleware?
*4.1.2. Data read / written*
The product can read a full table?
=> Can read a complete view?
=> Can read a complete stored procedure?
=> Is it possible to add a where clause / orderby these different elements?
=> Can use loaders / Unloaders?
=> Can read a query?
=> If yes, what tool to create query?
=> He uses a single grammar for all databases?
=> He uses a grammar extended to take advantage of specific functions to the basics?
=> If Yes, what basis?
=> Does it control of the validity of flat files?
=> He manages the Time Out DataBase? (What happens if the base does not?)
=> Does it allow the use of error messages database?
*4.2. Non-relational data access*
=> How the product connects there to the sources / destinations of the non-relational business?
=> Can read / write all types of data? On what basis?
=> Does it control of the validity of XML files?
*4.3. Access to standard data applications / ERP*
=> Access to data and ERP software packages:
*5. Triggering processes*
*5.1. Trigger type of message*
=> Corba:
=> JMS:
=> MOMS:
*5.2. Trigger type of polling (polling)*
=> Polling directory:
=> Polling POP / MAPI:
=> Polling databases:
*5.3. Trigger trigger databases:*
=> Trigger trigger databases:
=> If yes, which databases?
*5.4 The product includes a scheduler it?*
*5.5. Other trigger modes:*
*6. Data processing*
*6.1. Data Transfer*
=> The product allows set-there treatments?
=> He manages the transactions?
=> He supports the multiple simultaneous updates?
=> Contain standard tools for synchronizing tables?
*6.2. Data Transformation-aggregates-calculations*
=> What are the functions available?
=> Detailing those to be executed by the database:
=> Detailing those to be executed by the engine:
=> Are there any transformation functions format date / digital?
=> Are there any statistical functions of data quality?
=> The product allows it to transcode a reference table?
=> Supports he joins heterogeneous?
=> Modes of joins between tables are supported:
=> Operators supported on the knuckles:
=> Management nested query:
=> Does it changes through a coded language of the market?
=> Does it reuse the scripts pl / sql, dts, stored procs, etc.. , Exist?
*7. Development tool processing chains*
=> What is the language used for the development of processing chains?
=> The product he offers the possibility of mapping graph?
=> The graphical interface allows it to drag and drop to the construction of treatment:
=> It enables the graphical representation of flux?
=> A query is it possible in the product under development to see the data?
=> The product contain an impact assessment tool?
=> What are the tools to assist in debugging?
=> It allows the generation of technical documentation?
=> It allows the generation of functional documentation?
=> Does it allow the consultation of the documentation over the Web?
=> What are the main functions of error handling available?
=> What are the main functions of error handling available?
*8. Advanced Development*
=> The engine of the product he unveiled APIs for the integration of process chains in the external developments?
=> The tool allows it to integrate external functions developed in the following language:
=> He provides mechanisms for disaster recovery?
=> Does it play on the parameters of buffer / index / cache data to optimize treatment?
=> Does it define a process that can be applied to n / m sources / destinations (without duplicating the process)?
=> It allows the development team?
=> Does it support versioning?
=> Versioning is compatible with the tools on the market?
*9. Deployment / Production start*
=> The treatments are compiled before the switch in production?
=> The product allows it to create a "package" delivery?
=> New treatments are put into production?
=> The product allows it to create a "package" delivery?
*10. Administration*
=> The product contain a management console?
=> If yes, is it accessible from a Web browser?
=> Possibility of taking remote control of the Administration Console:
=> Yes, interface proposed:
=> The administration console requires Does a specific server?
=> This console allows it to intervene in the current treatment?
=> This console allows it to follow the treatment in real time?
=> He manages the logs automatically?
=> If yes, what is their structure?
=> Does it generate specific logs?
=> Interfacing with monitoring tools:
=> If yes, which:
=> The product makes it out of whistleblowing?
*11. Scheduling*
=> The product has it a scheduling solution owner?
=> If yes, is there a possibility of insertion of external processing chain?
=> If yes, is there a possibility of inclusion of human intervention in the chain?
=> Can it be driven schedulers following?
*12. Security*
=> The product can use the rights of a directory?
=> Can allow / disallow the creation of scenarios?
=> Can allow / disallow the update scenarios?
=> Can allow / deny access to metadata?
=> Can allow / disallow the use of a management console?
=> Can allow / disallow the introduction of manual tasks?
*13. Various*
=> Can allow / disallow the creation of scenarios?
=> If yes, what languages are available?
=> The product documentation is it multilingual?
=> The product he obtained certifications from other publishers?
=> Are there opportunities for OEM integration?
=> The publisher is involved there to a standards body?
=> If Yes, (s) is (s)?
=> Is there a club user?
=> Is there a community of developers?
=> What is the language of product development?
=> What is the training cycle of the product?
=> What are the processes of product support?
thanks in advanceHi Ingo,
these files are coming with the BO-Installation. From my point of view they are responsible for the general reactions of the specified database - in my case oracle - behind BO.
Thanks a lot for help.
Sincerly Sabine -
Description about a function module O2_LANGUAGE_EXIT_FUNCTION
Hi All,
i want to know the description about the function module 'O2_LANGUAGE_EXIT_FUNCTION'. Please explain what is the functionality of this function module clearly.
Thanks & Regards,
Nagarjuna.hi,
send me ur mail id ,
i will send the pay roll related function moduls.
and document relataed to pay roll.
ramesh -
for s-log2 video the best iso apparently is 3200.(or higher)
if i shoot stills using the mechanical shutter, what iso gives the best dynamic range?
how about if i use s-log 2 silent shutter while exposing still photos,
or if i use s-log2 video, capture a frame, and output using an LUT,
how does the dynamic range in those scenarios compare to that of a still photo?
how can i get a sony supply an LUT for s-log2 video?
thanks,
chrisNote that AutoCad is not an avanced software, it only uses one cpu thread (so if you have a fast solo processor that's all AutoCad makes use of) but the cpus mentioned above are the fastest cpus per single core. I don't know about the Premiere Pro i.e. what this program does in the regard of utilizing all cores and threads, but AutoCad for sure does not. So an AutoCad machine only needs a fast CPU, good memory and a graphics card that AutoCad knows how to make use of in 3D (if you are using AutoCad for 3D) but AutoCad is definitely not the program to consider for use in 3D modeling. AutoCad is still vector based program (and probably will continue to be in future, since there will always be some need for vector based design software) but Autodesk does have software that is not vector based like Inventor.
-
is the new iPad and iPod touch 5g have exactly the same iSight camera. because i heard read a lot in the apple site about the new iPad camera but the description for the new iPod touch is not so good IN TERMS OF CAMERA. so please help me. coz i want to know is ipod touch 5g giving the new ipads like high clarity mages
The ipod touch 5g and the new ipoad both have 5-mega pixal cameras.
-
I didn't receive any news about the replacement program for the Ipod 1st generation. I have already sent the serial number online, but didn't have any progress. What should I do? Thank you
After you set up your service use your repair ID to track your replacement here:
https://selfsolve.apple.com/repairstatus/main.do
Remember: You will receive a replacement unit approximately 6 weeks after Apple gets your current iPod nano
Hope this helps.
-Julian -
HT5463 Questions about the "Do Not Disturb" feature not addressed in documentation
Hello,
I have some questions about the "Do Not Disturb" feature which are not quite addressed by the documentation.
When DND is enabled, will badge app icons still be displayed?
When DND is turned off, either manually or automatically, will Notification Center banners be available for alerts which occurred while DND was on, or are they lost forever?
I guess the main questions is, is DND like an answering machine, which stores up your notifications until you are ready to deal with them? Or is it a return of the "turn off all notifications" feature that existed in iOS 4, albeit in a more evolved form?
Thanks,
- SteveIf you have a schedule set, but activate it manually, it will de-activate at the scheduled time anyway. It behaves perfectly on my 4S, my wife's 4, and both of our iPads.
If you have an iPhone 5, it could be tied to the known issue with automatic time set going Wonky on LTE networks. If that's the case, try disabling the automatic time set and see if it behaves itself. -
Good documentation about the NWDI
Hello,
I just started with the NWDI by installing it. Is there any good (and short) documentation about the functionality of the NWDI? Has the NWDI something like a but tracker and so on?
What are you using for your development to enhance the possiblity of the NWDI? Are there any additional applications (not neccessary from SAP) that you are using?
Thx, VanessaHi,
Go through the following links
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c05ae1f2-e2f8-2a10-a19d-c36ef0999ab3
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03cd0f1-77c7-2b10-8093-de20e973c3fb
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03cd0f1-77c7-2b10-8093-de20e973c3fb
/people/boris.zarske/blog/2007/08/16/new-version-of-configuration-wizard-with-sap-netweaver-70-sps-13
/people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development
http://help.sap.com/saphelp_nw70/helpdata/en/44/355093ba830a67e10000000a422035/frameset.htm
Regards,
Saleem -
How to know about Description from the TransType...?
Hi All,
I have used SBO 2005 A PL 43 SP1 and have some queries below:
SELECT TOP 100 PERCENT T0.DocDate, T0.TransType, CAST(T0.BASE_REF as char) AS BASE_REF, T0.Warehouse, T0.CardCode, T0.CardName, T0.xInQty, T0.xOutQty, T0.Price, T0.Currency , T1.ItemName, T1.SuppCatNum, CAST(T0.InvntAct as char) AS InvntAct, T2.AcctName, T0.StatusDescr
FROM vwOINM_DEL0_02 T0 INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode LEFT OUTER JOIN OACT T2 ON T0.InvntAct = T2.AcctCode
WHERE (T0.ItemCode = 'RO00 0465') AND (CAST(T0.TransType AS char(3)) + CAST(T0.CardCode AS char) IN ('13 ZZ0 Cash&Carry') OR (T0.TransType <> 13))
AND (T0.xDocDate BETWEEN CONVERT(DATETIME, '2008-01-01 00:00:00', 102) AND CONVERT(DATETIME, '2008-11-25 00:00:00',102)) ORDER BY T0.DocDate, T0.TransNum
TransType -
> is a field name on table "OINM"
How to know about Description from the TransType and where can we relate to the table?
example :
TransType Description
====================
15 Delivery
13 AR Invoice
59 Goods Receipt
60 Goods Issue
Please anybody can help me...?
Regards,
AgungYou can use function on sql side which to proper transid returns desciption.
The function is as
create FUNCTION [dbo].[trans](@trans integer)
RETURNS varchar(100)
AS
BEGIN
DECLARE @ret varchar(100)
select @ret =
case @trans
when 1 then 'oChartOfAccounts'
when 2 then 'oBusinessPartners'
when 3 then 'oBanks'
when 4 then 'oItems'
when 5 then 'oVatGroups'
when 6 then 'oPriceLists'
when 7 then 'oSpecialPrices'
when 8 then 'oItemProperties'
when 12 then 'oUsers'
when 13 then 'oInvoices'
when 14 then 'oCreditNotes'
when 15 then 'oDeliveryNotes'
when 16 then 'oReturns'
when 17 then 'oOrders'
when 18 then 'oPurchaseInvoices'
when 19 then 'oPurchaseCreditNotes'
when 20 then 'oPurchaseDeliveryNotes'
when 21 then 'oPurchaseReturns'
when 22 then 'oPurchaseOrders'
when 23 then 'oQuotations'
when 24 then 'oIncomingPayments'
when 28 then 'oJournalVouchers'
when 30 then 'oJournalEntries'
when 31 then 'oStockTakings'
when 33 then 'oContacts'
when 36 then 'oCreditCards'
when 37 then 'oCurrencyCodes'
when 40 then 'oPaymentTermsTypes'
when 42 then 'oBankPages'
when 43 then 'oManufacturers'
when 46 then 'oVendorPayments'
when 48 then 'oLandedCostsCodes'
when 49 then 'oShippingTypes'
when 50 then 'oLengthMeasures'
when 51 then 'oWeightMeasures'
when 52 then 'oItemGroups'
when 53 then 'oSalesPersons'
when 56 then 'oCustomsGroups'
when 57 then 'oChecksforPayment'
when 59 then 'oInventoryGenEntry'
when 60 then 'oInventoryGenExit'
when 64 then 'oWarehouses'
when 65 then 'oCommissionGroups'
when 66 then 'oProductTrees'
when 67 then 'oStockTransfer'
when 68 then 'oWorkOrders'
when 70 then 'oCreditPaymentMethods'
when 71 then 'oCreditCardPayments'
when 73 then 'oAlternateCatNum'
when 77 then 'oBudget'
when 78 then 'oBudgetDistribution'
when 81 then 'oMessages'
when 91 then 'oBudgetScenarios'
when 97 then 'oSalesOpportunities'
when 93 then 'oUserDefaultGroups'
when 101 then 'oSalesStages'
when 103 then 'oActivityTypes'
when 104 then 'oActivityLocations'
when 112 then 'oDrafts'
when 116 then 'oDeductionTaxHierarchies'
when 117 then 'oDeductionTaxGroups'
when 125 then 'oAdditionalExpenses'
when 126 then 'oSalesTaxAuthorities'
when 127 then 'oSalesTaxAuthoritiesTypes'
when 128 then 'oSalesTaxCodes'
when 134 then 'oQueryCategories'
when 138 then 'oFactoringIndicators'
when 140 then 'oPaymentsDrafts'
when 142 then 'oAccountSegmentations'
when 143 then 'oAccountSegmentationCategories'
when 144 then 'oWarehouseLocations'
when 145 then 'oForms1099'
when 146 then 'oInventoryCycles'
when 147 then 'oWizardPaymentMethods'
when 150 then 'oBPPriorities'
when 151 then 'oDunningLetters'
when 152 then 'oUserFields'
when 153 then 'oUserTables'
when 156 then 'oPickLists'
when 158 then 'oPaymentRunExport'
when 160 then 'oUserQueries'
when 162 then 'oMaterialRevaluation'
when 163 then 'oCorrectionPurchaseInvoice'
when 164 then 'oCorrectionPurchaseInvoiceReversal'
when 165 then 'oCorrectionInvoice'
when 166 then 'oCorrectionInvoiceReversal'
when 170 then 'oContractTemplates'
when 171 then 'oEmployeesInfo'
when 176 then 'oCustomerEquipmentCards'
when 178 then 'oWithholdingTaxCodes'
when 182 then 'oBillOfExchangeTransactions'
when 189 then 'oKnowledgeBaseSolutions'
when 190 then 'oServiceContracts'
when 191 then 'oServiceCalls'
when 193 then 'oUserKeys'
when 194 then 'oQueue'
when 198 then 'oSalesForecast'
when 200 then 'oTerritories'
when 201 then 'oIndustries'
when 202 then 'oProductionOrders'
when 205 then 'oPackagesTypes'
when 206 then 'oUserObjectsMD'
when 211 then 'oTeams'
when 212 then 'oRelationships'
when 214 then 'oUserPermissionTree'
when 217 then 'oActivityStatus'
when 218 then 'oChooseFromList'
when 219 then 'oFormattedSearches'
when 221 then 'oAttachments2'
when 223 then 'oUserLanguages'
when 224 then 'oMultiLanguageTranslations'
when 229 then 'oDynamicSystemStrings'
when 231 then 'oHouseBankAccounts'
when 247 then 'oBusinessPlaces'
when 250 then 'oLocalEra'
when 280 then 'oSalesTaxInvoice'
when 281 then 'oPurchaseTaxInvoice'
when 300 then 'BoRecordset'
when 305 then 'BoBridge'
when 260 then 'oNotaFiscalUsage'
when 258 then 'oNotaFiscalCFOP'
when 259 then 'oNotaFiscalCST'
when 261 then 'oClosingDateProcedure'
when 10 then 'oBusinessPartnerGroups'
when 278 then 'oBPFiscalRegistryID'
else '?' end
return @ret
end
and call it as
SELECT TOP 100 PERCENT T0.DocDate, dbo.trans(T0.TransType), CAST(T0 .... -
Documentation about the transactions
Hello,
I'm looking for documentation about the transactions
CG3Y or CG3Z. My problem is that it doesn't update
existing files.
Thanx a lothi
Both CG3Y and CG3Z transactions are a part of EH&S.
CG3Y = EHS: Download appl. to frontend
Source file on application server Path of the file on the applicationserver
Target file on front end Path of the file on the frontend server (PC)
Transfer format for data Download the file as text (ASC) or in a binaryformat (BIN)
Overwrite file Overwrite the target file if it already exist (withoutprompting)
To start the download: <SHIFT-F1> (left button)
To cancel: <F12> (right button, red X)
CG3Z = EHS: Upload from frontend to appl.
Source file on front end Path of the file on the frontend server (PC)
Target file on application server Path of the file on the applicationserver
Transfer format for data Download the file as text (ASC) or in a binaryformat (BIN)
Overwrite file Overwrite the target file if it already exist (withoutprompting)
To start the upload: <SHIFT-F2> (left button)
To cancel: <F12> (right button, red X)
hope it willl help you
regards
sreelatha gullapalli -
Just to understand about the 8gb 3rd generation
I did update to version 4 tonight .. and realized there's no multitasking or other features that Apple is marketing .. Can't deny I'm really disappointed to know that I can't get those features to work on a hardware that is not even 6 months old .. even better .. something that is still on sale as the 8Gb 3rd generation ..
When iOS4 was introduced they said 3rd generations iPods would work with it .. now u really need to go and read the fine print ... and discover that it's only for 32 and 64 GB ...
Fine print is never a good thing ...Fair enough .. but a couple of things .. National dealers like Best Buy even today .. and you can verify that on their web site are referring to iPod touch 8 Gb as 3rd generation .. so I think Apple need to step up and force them not to use that marketing statement ... Apple is talking about 3rd generation on their web site .. than have a note at the bottom saying (32 and 64 Gb) ... the 2nd generation is mentioned as Late 2008 ... I got my iPod in 2010 ... so technically is nowhere to be found ...
And I'm talking about all the not tech people going to buy an iPod now and discover after it will never get the features Apple is marketing so much ..
Now .. do you think people will get ******? -
Hi, my name is Molly and my iPod has a backlight but it won't turn on, it's a fourth generation if that helps. I have looked in settings for anything about the backlight but there is nothing please help as I cannot find anything
Go to Settings>Brightness and make sure it is maxed out.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
About the Hierarchy description change to chinese
Hi,
About the Hierarchy,
I want to display the Hierarchy description change to chinese,
I change the Hierarchy description to chinese in Discoverer Administrator,
But the Hierarchy description still show column name in Discoverer Viewer,
If I change the Hierarchy attribute name to chinese in Discoverer Administrator,
and the Hierarchy description still show column name in Discoverer Viewer,
It's important issue for my end user,
so anyone can help me ?
your sincerely,
YehHi Bernhard,
Answer to your Question:
The original setting :
ANLB-PERFY = 12.
T090NA-XDAILY= " "
some one changed the Dep Key with
T090NA-XDAILY= X
I made the below change:
T090NA-XDAILY= " ".
then there is no error for the Asset.
Please let me know how to identify all the assets that have this error. You have mentioned RAAFAR00 'Recalculate depreciation'.
so my understanding is if i run the program the warning for all the assets appear.
Does calculation of Depreciation AFAB report the assets with errors.
Thanks,
Raja.
Maybe you are looking for
-
Droid 2 Global: OGG supported as ringtone, but not as a playable music file?
I've been having some trouble playing .ogg music in the music player (by trouble I mean it comes back as mostly static), though Android 2.2 is supposed to support ogg natively. Motorola's site on the Droid 2 Global shows something interesting: http:/
-
Displaying both Hindi and Arabic numerals in Oracle 10g PDF report
Hi-. Oracle experts told us to ask "In how many ways we can do it in oracle?" instead of asking "Can we do it in Oracle?" , I need ONE way to solve the following problem, it toke to much time and I don't know if it can be solved ! The problem: Can we
-
4.2.2 questions after update
Ok, I downloaded and updated the phone to 4.2.2. Backed up all my apps and settings. Now I'm wanting to do a factory reset to have it all nice and clean. If I do a factory reset now, does it reload 4.2.2? or the first version I had on the phone the d
-
Aiport Express v. Apple TV
Just curious if anyone has used Apple TV as a network bridge (like Airport Express) and plugged in a Blu-Ray, etc. to the Apple TV to have is automatically do it's fir,ware updates, BD Live, etc. I would primarily just want to stream music (which I k
-
Hi, How do I create a T-code for a report. I want to avoid giving out permissions to SE38