Deskjet 6980 will not print with Windows 7

This printer worked fine until a recently. Now I cannot print from Windows 7 desktop computer. The printer shows that it is offline. The report page from the printer tells me everything is connected and OK. I can print from my lap with XP Home Edition with no problems. I followed several ideas on this forum  and other web sites but none of them worked. If I restart the spooler, I get Error - Printing and nothing else. I ran the Windows 7 troubleshooter but it said it can't fix the problem. I can open the printer web page and everything looks OK. I installed Windows 7 in November and it has been printing OK until now.  Windows update says everything is up to date. I did install the patch mentioned here. Any ideas?

Did you delete the printer in Devices and Printers and re-add it?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • H-P Laserjet 4L printer will not print with Windows 7 operating system. Need help

    I have an H-P Laserjet 4L printer that worked fine with a Dell PC and Windows XP. But, it no longer worked when the PC was updated to Windows7. I was advised to buy an adapter that would accept the H-P plug and connect to the PC by means of a  USB port. I did that, but the H-P still will not print. Anyone know what to do about this problem?
    EugeneZ

    Hello EugeneZ,
    Welcome to the HP Support Forums!
    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial LaserJet Forums.
    The support page for your product may be helpful in the meantime: HP LaserJet 4L/mL Printer series
    I hope this helps!
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HP6380 will not print with Windows 7 new install

    I have an HP 6380 All-in-one printer. It has never given me any problem when
    printing in Vista. We purchased a new laptop for the Wife with Win 7. I
    installed the printer on there with no problems.
    I then decided to upgrade my laptop to 7 Ultimate. What I did was set my laptop as a dual boot machine and Win7 then became a full install, not upgrade.
    When I did network printer discovery, 7 performed a search, found the printer,
    and set it up. I did the test page print with success. I could not print
    anything past that point and subsequent test pages failed.
    I went to the HP web site and found a driver download that was supposed to
    include 7 support. The installed printer was removed and I ran the new setup.
    Still nothing past the initial test page would print. Further research on the HP
    site made reference to a patch and reboot which did not fix the problem. There
    was another utility on HP site that removed all installed printer files to allow
    a fresh install, no luck.
    At this point I decided to compare the printer properties between the Wife's
    system and mine. Her system called to a port labeled WSD Port HP38147 (HP
    Photosmart 6300 Series).
    On mine, the reference was to a TC/IP port with the network address of
    192.168.1.102.
    I tried to change this to a local port also.
    There was NO option for a WSD port, and when I tried to add a port, the only
    options were Local or TCP/IP.
    For now I am having to save items for printing, then go to my Vista via
    dual-boot and print there, a royal PIA.
    In Vista BTW the port is labeled Standard TC/IP port HP Photosmart C6300 Series.

    Did you delete the printer in Devices and Printers and re-add it?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP 3650 deskjet will not print in Windows 7

    New pc w/ Windows 7. My HP deskjet 3650 will not print PDF, Quicken, Website selections, etc.
    HELP!

    Did you install the driver as described here?  Will the printer print a Windows test page or a file from Notepad?  Do print jobs remain in the print queue?  Are there any error messages?
    Running the diagnostics at http://www/hp.com/go/tools may help resolve the issue.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My Photoshop CC 2014 will not print in Windows

    My HP Deskjet 5550 is compatible with Photoshop CC.  It will not print with CC 2014.  I have Windows 7 Pro.  Do I need another driver?

    How does cc 2014 fail?
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • TS1538 Ipod Classic will not work with Windows 8. Is there a fix?

    Itunes will not work with Windows 8. I have the latest version of itunes!
    When will the fix be available?
    When I try to Sync my ipod, nothing happens.

    Hi,
    You can download the latest official Firefox here: https://www.mozilla.org/en-US/firefox/new/
    You may also have to install [http://www.oracle.com/technetwork/java/javase/downloads/jre7u9-downloads-1859586.html Java] (choose either Windows x86 Offline or Windows x86 Online), and [http://get.adobe.com/flashplayer/ Flash] (choose the Firefox version and also deselect extras).
    For the Firefox metro version, please see [https://wiki.mozilla.org/Firefox/Windows_8_Integration#Elm_Nightly_Builds this]. You can install and use it along with the other version.

  • Elements 11 will not print with Epson R2000?

    Cannot make Elements 11 work with new Epson r2000 printer.  Prompt on screen states it is not compatible or settings are not correct.  Epson tech support worked on it, said to contact without success, said to contact Adobe.  Printer works fine on all other applications.  Help please.

    Thanks again.
    Richard
    Date: Thu, 12 Sep 2013 08:49:39 -0700
    From: [email protected]
    To: [email protected]
    Subject: Elements 11 will not print with Epson R2000?
        Re: Elements 11 will not print with Epson R2000?
        created by A.T. Romano in Premiere Elements - View the full discussion
    Ollie37
    Thanks for the follow up.
    Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
    Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
    ATR
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Premiere Elements by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    i have ipod classic 5gen it will not sync with windows the error message says ipod can not sync as required file missing   wht to do???

    Although you used the new USB 3.0 port, the actual connection speed is still USB2.0, as the iPod Dock connector, does not have the 10 times faster USB3.0 signal pins, the connection speed is still 480Mbits/s
    I assumed that you have tried the other USB 2.0 port to no success..
    Can you do the iPod Disk diagnostic as posted earlier by tt2, it wont fix your problem, but helps in troubleshooting.
    Have a nice day!

  • Centro & Treo 650 will not sync with Windows 7

    The 6.2 software will not work with windows 7. I have a new computer and can not get the phones to hot sync with my new computer. The Bluetooth does not recognize either of the phones. None of the other Bluetooth devices nor my car recognizes the phones. I do not have a data package with the phones so doing anything over the internet is out of the question. How do I get all the information that is on my two phones onto my computer?

    Try a low-tech solution.  Check the condition of the HotSync port connection on both the T3 and the cradle.
    Look for any possible corrosion, coating, or bent fingers in the cradle.  Sometimes a good cleaning with either Contact cleaner or isopropyl alcohol can work miracles!   (Use a q-tip swabbed in it, do not pour it onto the PDA).
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Tungsten t3 will not sync with Windows 7 64 bit using cradle sync

    Tungsten t3 will not sync with Windows 7 64 bit using cradle sync any suggestions?

    Try a low-tech solution.  Check the condition of the HotSync port connection on both the T3 and the cradle.
    Look for any possible corrosion, coating, or bent fingers in the cradle.  Sometimes a good cleaning with either Contact cleaner or isopropyl alcohol can work miracles!   (Use a q-tip swabbed in it, do not pour it onto the PDA).
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • My office professional will not run with windows 8.1

    my office professional will not run with windows 8.1 It ran fine on 7 and 8 but not 8.1

      Microsoft Windows 8.1 officially supports all currently supported Microsoft Office versions including Office 2013 / 2010 / 2007 / 2003 , and may be even earlier versions unofficially. I use Microsoft Office Professional Plus on my Windows 8.1 and it runs fine with no issues.   Could you try what has already been suggested by others including Big_Dave and reinstall Microsoft Office with complete reboot/restart  between uninstall/new installation <restart, not shut down and start over>. If this doesn't work, please post again if installation went fine, what exactly is the error code (if any), what is the problem exactly, any screenshots ?

  • PSE13 trial version and it will not work with Windows 7

    I have downloaded PSE13 trial version and it will not work with Windows 7

    I have been using PSE 13 for 3 months with no problems.   When I launch the Editor in PSE 13 this is what I get -
    "Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later"
    RAM 12.0GB
    64 bit operating system
    Intel(R) Core(TM)I7CPU 920 @ 2.67GHz
    Windows 7 SP1
    Hope this helps.
    Lynne

  • Printer deskjet f4200 will not communicate with computers

    OK so I am at a loss I know the communication is the issue.  I used this without problem from install till I had to have the computer crashed. Any help ? I have tried installing twice and the doc numerous times.

    Hi @cmac22,
    Welcome to the HP Forums!
    I understand that your HP Deskjet f4200 printer will not communicate with your computers running Windows Vista. I am happy to look into this for you!
    Please, take a look through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows Vista.
    Hope this guide helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Hp 1315 will not print with 10.6.7

    I cannot find any answers to this strange set of circumstances.
    I had an old iMac and an hp 1315 all-in-one printer, and everything worked fine. I recently bought a new iMac with OS 10.6.7, and, rather than reinstalling the printer software, I just plugged the old printer into the USB port on the new iMac. The printer worked fine but the device would not scan. I have since learned that 10.6.7 supports printing ONLY on this device. So far so good, but this is where things get strange.
    I wanted to scan some pictures, so I got out the old software CD that came with the printer and installed it in my new iMac. The result was that the device was now able to scan. I was happy about this until I discovered that the 1315 now will not print. I have done everything I can think of, including:
    -- uninstalling the hp software
    -- downloading the most recent driver from the HP website
    -- deleting the printer from the Print & Fax window and then adding it again
    -- running the "Reset Printing System" on the Print & Fax window
    -- running "Software Update"
    -- unplugging, replugging, restarting, etc.
    -- running the test page on the printer
    -- using the device to copy (i.e., using it separate from the computer)
    -- checking to see that there are no lights blinking on the device and that it has toner and paper
    The Print & Fax window shows me that my 1315 is "Idle" and is the "Last Printer Used," and it has the green light next to it that should indicate that there are no issues with the printer. But when I try and print something, it doesn't print, and the job status is simply "Error."
    I am fine with using this device as a printer only, like I did up until yesterday. I have another scanner, and if I had known this would happen I would used it and would never have touched the 1315 or messed with its scanning function.
    I must be able to print things for my business. Can anyone help me.

    Download and use the updated HP software from their web site, don't use the disk.
    You might have to perform some of the steps here, including trying a new user and #18 Resintall Just OS X to kick out the traces
    Step by Step to fix your Mac

  • Hp envy 4500 will not print from windows 8. Thinks it prints, but it doesn't.

    Am trying to print from my Toshiba laptop running Windows 8 to my HP Envy 4500 wirelessly. Works fine from my ipad, works fine from my desktop and laptop running Windows 7. I have uninstalled and re-installed the printer driver 5 times. Printer is recognized, has an IP addrress, and will print an internal test page. When I print to it from my Windows 8 machine, the file goes in the queue, gets a port, and then disappears as if it was printed. Nothing prints. Please help, this is SOOOOOOOOOOOOOOOOOO frustrating.
    This question was solved.
    View Solution.

    Having same problem with my Toshiba laptop windows 8.  Will not print from laptop, printer prints from ipad, and iphone.
    Deleted and reinstalled several times as well both ways with disk, and wizard.
    still unable to print from laptop, have to email everything to ipad in order to print.
    so annoying and frustrating.............

Maybe you are looking for