Desktop is no longer displaying all the colors on it's monitor.

My desktop computer is no longer displaying all the colors on its montior. I've replaced the monitor with a known good one and the problem remains the same. The desktop is 6 months old and when I purchased it, the first one had to be replaced because of this exact same issue. This appears to be a common problem. Is anyone else experienced this is issue and has HP recalled any of these specific desktop's because of it?

Wjile there can be no consolation with your plight, you do have the replacement option under warrant. BTW, it does help if you state the exact model or product #. Saying a "series" is like called out that I had a Chevy.

Similar Messages

Tecra A7-112 Display can't display all the colors corectly

Hi, I have the same problem with my display as the one in this post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=14718&messageID=54000
It seems that my screen can't display all the colors corectly and there appear somekind of stains/artefacts in most of the colors.
Here is a photo, not so good but still, with my issue:
http://www.logicode.ro/test.jpg
http://www.logicode.ro/test1.jpg
You can see the first color - pure red it seems ok and solid but he second - a small varation of red it has artefacts / somekind of stains.
I learned that this is a dithering issue which may be resolved in BIOS.
For the Satellite A100-237 the problem was fixed by downgrading to a older version of bios, but what can I do with my Tecra A7-112 notebook? :|
Message was edited by: eStatic

So I sent an e-mail to TOSHIBA rearding my problem and thet told me exactly this:
"It's no BIOS problem. We think the display is defective. You can contact on of our Service partners to repair the device."
So I sent it to TOSHIBA and they said that they will replace my LCD. Today I got my laptop back but I don't know if they did replace the LCD and I still have the problem. The dealer from which I bought the laptop will replace it with a brand new one but I'm scared it will have the same problem.
Now I'm lost as people from this forum told this is a BIOS problem but TOSHIBA denied this...

Officejet 4622, new printer today. black does not seem to work at all but all the colors do.

I print a test page through diagnostic tool and black square is blank. I cannot tell if the alignment prints properly as I have no example of what it should look like to ensure it is correct since the alignment fails to detect the alignment page. Scans work fine. I tried cleaning the print heads and still don't seem to get black to work correctly. This is a new printer purchased today 9.30.2012.

just in case anyone else encounters this problem, heres whats really going on and heres how to fix this annoying issue. its relatively easy to do and more efficient than wasting money on a new printer or having it repaired like most people end up doing.
whats going on? the ink has clogged the printing heads and has solidified shut. the "clean print heads" feature the printer came with does not have the ability to fix this. that feature is to clean up dirty heads, not clogged heads. why hp decided to make this model without a simple to remove cradle is beyond me, but fortunately the cradle DOES come out and can be cleaned with hot water.
theres a few items you will need to make this happen the easy way or you could just break out the tree limb loppers, like i did, and vent your frustrations.
what you will need: a pair of needle nosed pliers, a T9 torx screwdriver head ( auto parts stores sell them for a couple bucks), some paper towels and an area to work (its easiest to do this in a corner of a room, on a small table or the floor). keep in mind you are dealing with ink, so change out of your good clothes just in case and also grab a paper plate or a few sheets of printing paper to set the ink cartridges on as you work.
1) ok. lets get started. !!!FIRST UNPLUG THE PRINTER RIGHT NOW, SO YOU DONT ACCIDENTALLY DIE BY ELECTROCUTION!!! i forgot and when i began unscrewing the first 6 screws, the chime kept going off and im like **bleep**? i was impressed by the safety measures hp took while engineering this model.
2) the printer is now unplugged and then go to your corner work area and place the printer so there is a wall or barrier on its left and also a wall or barrier behind it. do this while facing it as if you were about to use it.
3) now, what you have to do is open the printer like you are going to change the ink and on the right side there is a plastic guide that prevents the top from opening all the way. look on the side and you will notice it could pop off with your fingers. pop it off and open it all the way open so you could get at the screws the lid would have prevented you from accessing.
4) lean the scanner portion and top portion against the back wall.
5) all screws you will be removing are size T9H torx screws. there are ten total. there are 2 black screws in the front top and then 4 black screws in the back top. remove them and put them on your paper plate.
6) next is 1 short silver colored screw located under the control panel, use your finger and feel around beneath the * button. unscrew it, put it on the paper plate.
7) next you are going to remove the face/control panel to get at the last 3 screws so locate the little illustrations on the top of the printer, there are 2 on the bottom left and 5 on the bottom right (1 and 2 on the left explain paper jam removals and then 1-5 on the right explain changing ink cartridges). then about half an inch south of the number 5 illustration, on the lip, is a plastic bracket. six inches to the left is another one then 6 more inches to the left, under the illustration number 2 (paper jam removal) is a third bracket. undo them using your fingernails. and just flip it up like car hood and then lay it down on the main top portion of the printer, minding the flat wire which is connected into the circuit board of the control panel (if the flat wire popped out because you got too rowdy on it, then simply insert it back in when you reassemble).
8) next, unscrew the 3 longer silver screws which are located under the panel you just popped off. there is 1 on the left and 2 on the rightish side. toss em on the paper plate.
9) now that all the screws are removed, take the face panel and partially pop it back together.
10) then take the whole top ( the part with the little illustrations and lift it like a car hood, ONLY THIS TIME OPEN IT TO THE LEFT and balance it on the edge of the printer, leaning it towards the wall or barrier on your left. BE CAREFUL NOT TO YANK ON THE FRUIT STRIPE COLORED WIRES ON THE LEFT AND ALSO THE BLACK FLAT WIRE THAT CONNECTS THE SCANNING PORTION TO THE MAIN PORTION OF THE PRINTER.
11) next grab the needle nose pliers and remove the 2 silver colored tension springs located behind the printer cartridges. pay attention where they were attached so you remember where they go during assembly. take a pic with your phone if you have to or simply re-figure it out like i did. toss em on the paper plate.
12) then disconnect the 2 large flat wires and 1 small flatwire attached to the back of the ink carriage. take a picture or remember like i did. i imagine bad things may occur if you reverse them on re-assembly. grab the phone and take a quik pic to be sure.
13) now remove the ink carriage, cartridges and all, by lifting the front first. be careful of the little transparent ribbon in there that moves the carriage left to right and vice versa. you dont want to damage that little guy. now take the carriage to your paper plate. dont drip any ink or accidentally get it on your fingers without knowing or you will make a mess.
14) remove the ink cartridges and set them on the paper plate, ink side up to avoid a mess, these things sometimes drip. set the plate off to the side. its time to clean the print heads.
15) then go to the sink, with the empty ink carriage and turn the water on hot and then just let the empty ink carriage sit there with the water mainly going through the screen of the clogged color (inspect and make sure there isnt a little rubber gasket surrounding the little screen if there is dont lose it. i didnt look too closely and i dont think hp has them but i know some other printers do). it wont stain the sink but wash down any ink as it comes out to be sure. also notice there is a small circuit board attached to it. dont bang it up but getting it wet doesnt matter.
16) keep doing this until the water runs clear.
17) then use your finger and rub the screen gently with your finger and then rinse it, washing away the ink until the water runs clear. continue this until there is no more ink and the screens are clean. do it to all the colors just for good measures. the problem color that wouldnt print, you will notice takes longer to clean than the other colors.
18) now look on the bottom side of the carriage. those wierd looking things are the heads. rinse them with hot water and wipe them with paper towels. then flip it over and blast the screen side again. also in between the screenside and the heads (on the side of the carriage) is an opening that is also probably gunked up. blast it with water too. then flip it over and wipe the heads again. repeat this step until nothing wipes away or until you are sick and tired.
19) shake off then use paper towels to dry the entire unit. make sure the unit is dry. especially inside the female plugs. blow in it or break out the hair dryer and gently dry it. dont sit there and melt it though with the blow dryer. but the sooner it dries the less likely your ink cartridges sitting on the paper plate will dry out. the ink wont dry out fast just dont take a nap or go out on a date until you are reassembled with the ink portion.
20) now you have completed the cleaning of the heads and probably wont need to do this again for the length of time it was since you bought the printer. and just like a roadtrip you used a map to navigate, you will use these instructions in reverse for re-assembly. but keep in mind when re-inserting the 3 flatwires you disconnected from the back of the ink carriage, make sure you have the little metal contact points on the flatwires (male side) inserted so they touch the little metal contact points on the carriage plugs (female side). ALSO BE EXTRA CAREFUL NOT TO DAMAGE THE BLACK FLATWIRE CONNECTING THE SCANNER PORTION TO THE MAIN PRINTER PORTION. THERE IS A LITTLE GROOVE IN THE PLASTIC WHERE IT CAN BE SEATED TO GUARANTEE NO CRIMPAGE. USE IT. also make sure the 2 hinges of the scanner portion/lid are seated properly before fastening the the top with the 6 black screws.
now re-assemble the printer and reinstall the ink cartridges. and then plug in the unit, and turn it on. if you get any notifications on the control panel saying the carriage wont move, then open the hood and take out the ink cartridges, push around and make sure the carriage is seated properly and that the tensioner springs are in place properly. repeat if neccesary until notifications go away or just do a test print and disregard the notification if you messed with it already a few times. thats what happened to me and the notification went away on its own. once its online, open the hp utilities and press the "clean the heads" button. do it 2x in a row and you will be back in style, with extremely rich and bold colors and yes, raven black print.
p.s.
you can always take your aggressions out with the tree limb loppers or the tin snips like i did and snip out the center plastic that prevents you from taking the carriage directly out. this eliminates disassembly and re-assembly entirely. just make sure you DO NOT CUT THE TRANSPARENT RIBBON THAT MOVES THE CARRIAGE BACK AND FORTH. this way the next time it happens it only takes you 10 minutes before you are up and printing.
enjoy! - Porf

HT4623 I have just updated to ios7 on my iphone and don't like the look and feel of this update. Where are all the colors and texture of all the older isos, all those white background colors,yuk. Is a way to go back to the ios6

I have just updated to ios7 on my iphone and don't like the look and feel of this update. Where are all the colors and texture of all the older isos, all those white background colors,yuk. Is a way to go back to the ios6

"Unlike". iOS 7 doesnt display well on my 4S. iOS 6.1.3 should still be supported for older hardware. I think I shall me moving to Samsung Galaxy now. Was really hoping hte new iphone would get a bit larger.

Setfilter to display all the duplicate rows pb7

Friends,
my version is powerbuilder 7.
i am checking the duplicate rows in the datawindow before inserting.
in a button click event...i have the below code
dw_master.SetSort ("rollno A")
dw_master.Sort()
dw_master.SetFilter("rollno = rollno[-1]")
dw_master.Filter()
if dw_master.RowCount() > 0 then
MessageBox('Duplicate Rows','Check the Duplicate Roll numbers',StopSign!,OK!)
Return 1
end if
//no dups, so clear the filter and do the update...
dw_master.SetFilter ("")
dw_master.Filter()
i have 2 duplicate rows...but this setfilter is displaying only one row....
if it displays all the duplicate rows then it will be very useful for me...
how can i modify this code to get all the duplicate rows in this datawindow before inserting?
thanks

Instead of a filter you could do this...
boolean lb_dupe_found=false
long ll_row, ll_rowcount
string ls_val1, ls_val2
ll_rowcount = dw_1.rowcount()
for ll_row = 2 to ll_rowcount
ls_val1 = dw_1.getitemstring(ll_row, 'col1')
ls_val2 = dw_1.getitemstring(ll_row -1, 'col1')
if ls_val1 = ls_val2 then
// duplicate
lb_dupe_found = true
exit
end if
next
if lb_dupe_found then
messagebox('DUPE', 'Houston we have a problem!')
else
messagebox('SAVE', 'Data valid for saving')
end if

How to show regions markers in Google maps based on longitude and latitude. on-click of region marker i want to display all the country locations based on the region from share point list?

Hello every one,
In My requirement i am having some regions with longitude and latitude in one SharePoint list. in another SharePoint list i am having the country values with longitude and latitude and region as look up field. I want to display all the region
markers in Google maps. on click of any region marker i want to zoom in the map to region level and i need to display all the country markers in Google maps under the region. can any body help me on this requirement.
Thanks in advance,
Venu.

Not sure about Google Maps but this is fairly easy to do with Bing Maps. I've used Bing Maps with SharePoint lists fairly regularly. Here are some blog posts:
http://blogs.bing.com/maps/2013/03/26/connecting-a-sharepoint-list-to-bing-maps/
http://blogs.bing.com/maps/2013/03/07/geocoding-a-sharepoint-list-item/
Once you have your sharepoint list connected to Bing Maps you can easily filter the list data based on the selected country if you have a country column in your list. If you want to take things a bit further an create a much cooler user experience you can
also use the Bing Maps GeoData API to get the country boundaries and show them on the map as polygons. These could be color coded based on some metric, or set up as the clickable area on the map rather than a pushpin. Here is a blog post on how to use the
GeoData API with the JavaScript Bing Maps control:
http://blogs.bing.com/maps/2013/06/25/retrieving-boundaries-from-the-bing-spatial-data-services-preview/
http://rbrundritt.wordpress.com

How can i display all the query items to a table?

how can i display all the query items to a table in a jsp file?
i always have an out of memory error..

any body??any idea?
is it possible thru configuration or i have to write a program by the abaper??
Biswa

How can I display all the columns on the screen without scrolling from side to side?

My clinic software has many columns. How can I display all the columns without having to scroll from left to right all the time?

If the software you are using doesn't offer the ability to increase or decrease document size, as many do, then the only way is to increase your screen resolution. If that's not possible, maybe you can decrease your font size? If you can't do any of these, I think you're out of luck!

HT201471 I updated my iPad 2 (model A1395) to IOS 8 and all the colors changed and the photos are like negatives. why? and how do I fix it?

I updated my iPad 2 (model A1395) to IOS 8 and all the colors changed and the photos are like negatives. why? and how do I fix it?

Looks like someone changed setting in iOS8.
Change this setting.
Settings -> General -> Accessibility -> Grayscale or Invert Colors

How can I get my iPod touch to display all the artwork on my computer?

Hi,
I have an iPod touch 4th gen 32 GB with iOS 6.1 on it. I have trouble getting it to display all the album artwork that I have on my computer. Not all of my music has it, but about 90% of it does. Is there any way I can make it display everything that's on my computer? I have iTunes 11 on it and it is a Windows 7 computer. Thanks!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Can I view all the colors in an .ASE file?

I would like to import all of the colors in an .ase file to view them together in a grid as data for research I'm doing. Is there a way to access all the colors in a palette at once and import them into a Photoshop, InDesign, or Illustrator file? (there are hundreds)

As far as I understand it, the Script Render Swatch Legend might do what you want:
http://www.wundes.com/JS4AI/
But probably not. In that case please explain further.

Why does my ipod no longer play all the items in a playlist?

Why does my ipod no longer play all the items in a playlist? I have to go to each item individually to select it as it no longer goes from one item to the next.

what kind of connection do you have? do you use the ipod 30 pin cable that connects directly to the head unit? it so, maybe you could get help on the alpine site, or a similar site?it could just be a bad connection. you may just have to go oldschool and use rca cables and plug those in...

IOS7 syncing with MS Outlook 2010 no longer syncs all the contact information

With the new iOS7 on an iPhone 4s, syncing with MS Outlook 2010 on win XP, the phone no longer syncs all the contact information as it used to before I updated to iOS7 and iTunes 11.1, and now ignores the "Home" addresses I have on Outlook. It also apprears to miss some other bits of information too, but the home addresses are key for when I am away from the computer. How can I resolve this syncing error? Thank you.

The same thing is happening to me since upgradng to iOS7, although I am syncing contacts with Mac contacts, not Outlook.

Report to display all the contacts of an opportunity.

Hello,
I have a requirement, can we create a report which displays all the contacts of an opportunity apart from primary contact.
Any inputs on the same will be appreciatable. TIA
Edited by: 1004233 on May 6, 2013 12:16 AM
Edited by: 1004233 on May 6, 2013 3:28 AM
Edited by: 1004233 on May 6, 2013 3:28 AM

Hey Aveek;
   Try this, which will get the most recent one. You would just need to change it to loop at the edids records to get at them all...
      TABLES: *edidc, *edids, *t100.
      DATA: wf_string type string.
      CLEAR *edids.
      SELECT SINGLE *
         INTO *edids
         FROM edids
         WHERE docnum = *edidc-docnum
           AND status = '51'.
      SELECT SINGLE text
         INTO *t100-text
         FROM t100
         WHERE sprsl = 'EN'
           AND arbgb = *edids-stamid
           AND msgnr = *edids-stamno.
         CLEAR wf_string.
      MOVE *edids-stapa1 TO wf_string.
      REPLACE '&' WITH wf_string INTO *t100-text.
      IF sy-subrc EQ 0.
        CLEAR wf_string.
        MOVE *edids-stapa2 TO wf_string.
        REPLACE '&' WITH wf_string INTO *t100-text.
        IF sy-subrc EQ 0.
          CLEAR wf_string.
          MOVE *edids-stapa3 TO wf_string.
          REPLACE '&' WITH wf_string INTO *t100-text.
          IF sy-subrc EQ 0.
            CLEAR wf_string.
            MOVE *edids-stapa4 TO wf_string.
            REPLACE '&' WITH wf_string INTO *t100-text.
          ENDIF.
        ENDIF.
      ENDIF.
      A little sloppy (OK, alot!), but it gets the job done...
Cheers,
John

The charging cable now longer fits all the way in the charging port. I can't see if any lint is in there, but if there is how can I get it out?

the charging cable now longer fits all the way in the charging port. I can't see if any lint is in there, but if there is how can I get it out?

Go to the Music section of your Library (very top-left corner) and see if your songs are there. The "Purchased" playlist may have been deleted or gotten corrupted, but if that happens it's not a big deal because your music should still be in your main Music Library.
If your music is NOT in the Music section of your Library, then go to the iTunes Store homepage and find the Quick Links list on the right side. At the top of that list, click Purchased and you can redownload all of your previous content that you might have lost.

Desktop is no longer displaying all the colors on it's monitor.

Similar Messages

Maybe you are looking for